质子交换膜燃料电池电站多米诺事故概率和风险研究

为探究氢能电站火灾爆炸事故发展规律,采用多米诺效应对电站进行事故概率和风险研究,建立氢能电站多米诺效应定量风险分析模型。基于设备受损概率模型与多米诺理论基础,提出氢能电站多米诺效应概率计算方法,并将方法运用到实际案例,结合SAFETI软件对具体多米诺事故场景进行定量计算。研究结果表明：氢能电站易发生多米诺事故,考虑一级多米诺效应后人员潜在死亡概率增加56%。研究结果可为制定氢能电站安全防控措施以及降低火灾爆炸事故对人员和设备的危害提供依据。     

The use of current risk analysis tools evaluated towards preventing external domino accidents

Risk analysis is an essential tool for company safety policy. Risk analysis consists of identifying and evaluating all possible risks. The efficiency of risk analysis tools depends on the rigueur of identifying and evaluating all possible risks. The diversity in risk analysis procedures is such that there are many appropriate techniques for any circumstance and the choice has become more a matter of taste. In this paper, we examine the risk analysis tools used by 24 chemical plants in Belgium, mainly located in the port of Antwerp, the second largest chemical cluster in the world after Houston, TX, USA. The aim of this paper is to identify the current practice in the chemical industry subject to European Seveso legislation and to examine how the present methods can be integrated to improve safety policy, especially towards preventing major accidents. Moreover, conclusions on the prevention of catastrophic external domino accidents involving several companies are formulated. This paper also gives impulse to investigating cross-company management implementations concerning external domino accident prevention.     

基于多米诺效应的定量风险评价研究

多米诺效应是引发化工重大事故的主要原因之一.本文综合国内外的研究成果,对火灾热辐射、冲击波超压等造成的多米诺效应进行了深入分析,建立基于多米诺效应的定量风险评价模型,其中包括了评价流程、传播概率、阈值距离计算、多米诺效应对事故频率的影响及后果分析的内容.最后利用Matlab7.1计算平台,以汽油储罐进行实例分析,结果表明该方法是一种适用于多米诺效应定量评价的良好方法,能够比较科学、有效的对危险单元进行风险评价,使重大事故风险评价更切合实际,为政府监管部门和化工企业进行事故的控制和预防提供决策技术.     

基于蒙特卡洛模拟的多米诺事故风险量化管理*

为降低危化品相关的化工事故造成的人员伤亡和财产损失,以化工多米诺事故为研究对象,探讨由初始事故引发1个或多个次生事故的连锁反应机理与风险评估方法。提出应用蒙特卡洛模拟对多米诺事故风险进行动态量化的方法,梳理化工多米诺事故风险的识别、分析、评定、处理全周期管理流程,并以1个天然气压气站为案例,验证基于蒙卡模拟的化工多米诺事故风险量化方法的有效性。结果表明:该方法可以更准确地对化工多米诺事故风险进行定量评估。多米诺事故风险全周期管理流程的梳理能够有效指导化工企业开展安全管理、事故预防等工作。     

DomPrevPlanning: User-friendly software for planning domino effects prevention

Chains of accidents, in literature generally referred to as domino effects, knock-on effects, cascade effects or escalation effects occur very infrequently but with disastrous consequences. There exist very few software packages to study such domino accidents in complex industrial areas and to forecast potential catastrophes caused by secondary order (involving a sequence of three installations submitted to two consecutive accidents), tertiary order or even higher order accidents. Moreover, available domino software focuses on risk assessment and on consequence assessment. None of these toolkits specifically addresses the prioritization of installation sequences in an industrial area in order to facilitate objective prevention decisions about domino effects. This paper describes the application of a new computer-automated tool designed to support decision-making on preventive and protective measures to alleviate domino effects in a complex surrounding of chemical installations. Using a holistic approach and thus looking at the entire industrial area as a whole, all sequences of three installations in the area are ranked according to their danger contribution to domino effects. An example of a cluster of chemical plants demonstrates the level of qualitative and quantitative input data required. The example is also used to explain the toolkit results, as well as the surplus value and the benefits for company safety managers and regulators.     

A model for estimating the impact of the domino effect on accident frequencies in quantitative risk assessments of storage facilities

It is well known that the domino effect can have a major impact on accidents in storage facilities, as it can increase the consequences of an initial event considerably. However, quantitative risk assessments (QRAs) do not usually take the domino effect into account in a detailed, systematic way, mostly because of its complexity and the difficulties involved in its incorporation. We have developed a simple method to include the domino effect in QRAs of storage facilities, by estimating the frequency with which new accidents will occur due to this phenomenon. The method has been programmed and implemented in two case studies. The results show that it can indeed be used to include the possibility of domino effect occurrence in a QRA. Furthermore, depending on the design of a facility, the domino effect can have a significant effect on the associated risk.     

Inherent risk assessment—A new concept to evaluate risk in preliminary design stage

Quantitative Risk Assessment (QRA) has been a very popular and useful methodology which is widely accepted by the industry over the past few decades. QRA is typically carried out at a stage where complete plant has been designed and sited. At that time, the opportunity to include inherent safety design features is limited and may incur higher cost. This paper proposes a new concept to evaluate risk inherent to a process owing to the chemical it uses and the process conditions. The risk assessment tool is integrated with process design simulator (HYSYS) to provide necessary process data as early as the initial design stages, where modifications based on inherent safety principles can still be incorporated to enhance the process safety of the plant. The risk assessment tool consists of two components which calculate the probability and the consequences relating to possible risk due to major accidents. A case study on the potential explosion due to the release of flammable material demonstrates that the tool is capable to identify potential high risk of process streams. Further improvement of the process design is possible by applying inherent safety principles to make the process under consideration inherently safer. Since this tool is fully integrated with HYSYS, re-evaluation of the inherent risk takes very little time and effort. The new tool addresses the lack of systematic methodology and technology, which is one of the barriers to designing inherently safer plants.     

基于LOPA逻辑的罐区多米诺效应定量风险评估*

为了更好地降低化工企业罐区事故造成多米诺效应的风险,提出1种基于保护层分析（LOPA）的定量风险评估程序。首先,阐述基于保护层分析(LOPA)逻辑的多米诺定量风险评估流程,即引入包括可用性、有效性及3种逻辑门定义及量化的安全屏障定量评估;然后,利用LOPA的分析逻辑将安全屏障融入多米诺定量风险评估框架中;最后,选取2×2 000 m3苯乙烯罐区为对象,识别防火层与喷淋冷却系统2种安全屏障并开展基于LOPA逻辑的罐区多米诺效应定量风险评估,得出安全屏障能有效地降低多米诺事故发生频率及罐区个人风险的结论。研究结果表明:该分析方法可为化工企业开展多米诺效应定量风险评估提供参考。     

多米诺效应的风险分析方法

介绍与分析多米诺效应的相关研究,并针对多米诺效应的定量风险分析,建立了从多米诺场景辨识到后果分析的多米诺效应定量分析方法.通过分析初始事故带来的物理效应对邻近设备的影响,计算了二次设备的损坏概率;分析了多米诺场景,计算了多米诺事故频率,并根据多米诺事故的后果得到个人风险和社会风险曲线.多米诺效应的风险是工业区一个潜在的严重风险,加强多米诺效应的研究对工厂和工业区的安全管理与规划都有重要意义.     

化工储罐区池火灾多米诺效应风险评估

化工储罐区储罐数量较多且集中,一旦发生事故很可能诱发多米诺效应造成灾难性的后果。在分析池火灾多米诺效应作用模式的基础上,建立了池火灾多米诺效应风险评估模型,并对某化工储罐区进行了实例计算,分析了单一储罐池火灾事故引发其他储罐池火灾的风险。分析结果表明,池火灾是诱发化工储罐多米诺事故的重要因素,且会造成风险的显著增加,但并非所有的池火灾事故都会诱发多米诺效应。此外,将多米诺效应评价方法应用于化工储罐池火灾事故风险评估中可有效地预测次生事故的发生概率和后果,从而提出针对性措施。     

The analysis of domino effect impact probability triggered by fragments

Explosion fragments are the main cause of domino effect in accidents of the chemical and process industry. A number of significant studies have been conducted to further our understanding of the mutual impact of two major hazard installations (MHIs). This work focused on the development of a new model for the impact probability of domino effect triggered by fragments. Firstly, an expression for the initial projection velocity of fragments was founded by taking the explosion moment as a polytropic process and solving energy transformation equation, then the flight trajectory and velocity were represented by some equations with the flight boundary conditions in flight process under gravity and air friction. With the obtained equations as the objective function, the projection uncertainty was analyzed through sampling of the random variables. Finally, a new systemic model for the impact probability of domino effect is put forward by integrating the flight laws and projection uncertainty of fragments, and the impact probability linear equations with the coefficient matrix of secondary effect were built up in order to calculate the impact probability of domino effect. The study on domino effect impact probability provides some useful insights into the generation mechanism, projection features, flight laws and impacts on targets of the fragments, and also lays a foundation for analysis of domino chain risk caused by explosive fragments in chemical industrial complex.     

Quantitative assessment of domino scenarios by a GIS-based software tool

A software procedure was developed for the quantitative assessment of domino effect. The procedure was based on a systematic methodology for the identification of domino scenarios and for the assessment of consequences and expected frequencies of the escalation events. A geographical information system (GIS) platform was interfaced to the domino assessment software. The implementation of plant lay-out data to the GIS allowed the automatic identification of the possible targets of escalation effects by the software procedure, and a straightforward calculation of the contribution to individual and societal risk indexes caused by the possible domino scenarios. The procedure was applied to the analysis of several case-studies based on actual plant lay-outs. The results evidenced that the approach allows the quantitative assessment of risk caused by escalation events with a limited additional effort with respect to that required by a conventional QRA. The use of a GIS-based software was a key element in the limitation of the effort required for the quantitative assessment of domino scenarios. Moreover, the results of the case-studies pointed out that the estimation of risk increase due to domino events is an important tool for an effective assessment and control of industrial risk in chemical and process plants.     

FREEDOM II: An improved methodology to assess domino effect frequency using simulation techniques

The uncertainty and the complexity associated with the domino effect is a barrier to assessing the frequency of such accidents analytically. The use of simulation techniques, such as Monte Carlo, to examine the domino effect instead of analytical techniques has shown great promise. In this paper, a new method to assess the frequency of domino accidents is proposed—FREEDOM II—which is an improvement on the recent algorithm proposed by the authors (FREEDOM). The modifications on FREEDOM were carried out to overcome a limitation of the method and to extend its capabilities. A key shortcoming of the earlier method was its inability to handle multiple failure scenarios. This shortcoming has been overcome in FREEDOM II. A new and improved algorithm has been developed that carries out the simulation in a significantly shorter run time. The applicability of the new model is shown by performing a multi-scenario case study.     

Risk assessment and risk reduction of an acrylonitrile production plant

Reducing accident occurrence in petrochemical plants is crucial, thus appropriately allocating management resources to safety investment is a vital issue for corporate management as international competition intensifies. Understanding the priority of safety investment in a rational way helps achieve this objective.In this study, we targeted an acrylonitrile plant. First, Dow Chemical's Fire and Explosion Index (F&EI) identified the reaction process as having the greatest physical risk. We evaluated the severity of accidents in the reaction process using the Process Safety Metrics advocated by the Center for Chemical Process Safety (CCPS); however, this index does not express damages a company actually experience. To solve this problem, we proposed a new metric that adds indirect cost to CCPS metrics. We adopted fault tree analysis (FTA) as a risk assessment method. In identifying top events and basic events, we attempted to improve the completeness of risk identification by considering accidents from the past, actual plant operation and equipment characteristics, natural disasters, and cyber-attacks and terrorist attacks. Consequently, we identified the top events with high priority in handling because of serious accidents as fire/explosion outside the reactor, fire/explosion inside the reactor, and reactor destruction. The new CCPS evaluation index proposed in this study found that fire and explosion outside the reactor has the highest severity. We considered the creation of the fault tree (FT) diagram of the top event, estimating the occurrence probability, and identifying the risk reduction part and capital investment aimed at risk reduction. As an economically feasible selection method for risk reduction investment, using the difference in loss amounts before and after safety investments indicated investment priority.     

某储罐区火灾多米诺效应场景推演

化工园区中危险源众多,一旦发生事故很容易在整个园区内蔓延和发展.针对化工园区内储罐密集,容易引发连锁反应导致事故扩大的特点,利用FDS软件对储罐火灾场景进行数值模拟,根据储罐所受热辐射确定化工园区内储罐火灾最可能的事故发生序列,并引入基于设备失效前时间的机械设备故障概率模型对罐区内单个储罐的火灾风险进行研究,得到储罐区...     

The significance of domino effect in chemical accidents

A historical survey was performed on 330 accidents involving domino effect, occurred in process/storage plants and in the transportation of hazardous materials; only accidents occurred after 1st-January-1961 have been considered. The main features – geographical location, type of accident, materials involved, origin and causes, consequences, domino sequences – were analyzed, with special consideration to the situation in the developing countries and compared to those from other previous surveys. Among the involved substances, LPG was the most frequent one, followed by liquid hydrocarbons. Process plants (38.5% of cases) and storage areas (33%) were the most common settings; 10.6% of past domino accidents occurred in transfer operations. The ratio between “two-step” and “three-step” domino accidents was found to be 6. A specific analysis of the accidents (84) occurred in the 21st century was performed, comparing them with the total set of accidents. Finally, a set of specific recommendations inferred from the results is provided.     

Assessment of risks posed by chemical industries—application of a new computer automated tool maxcred-III

The paper describes the application of a new computer automated tool, developed by us, in the risk analysis of a typical chemical industry engaged in the manufacture of linear alkyl benzene. Using the tool—a comprehensive software package maxcred-III (MAXimum CREDible accident analysis)—nine different scenarios, one for each storage unit, have been studied. It is observed that the accident scenario for chlorine (instantaneous release followed by dispersion) leads to the largest area-under-lethal-impact, while the accident scenario for propylene (CVCE followed by fireball) forecasts the most intense damage per unit area. The accidents involving propylene, benzene, and fuel oil have a high possibility of causing domino/secondary accidents as their destructive impacts (shock waves, heat load) would envelope other storage and process units.Besides demonstrating the utilizability of maxcred-III, this study also focuses attention on the need to bestow greater effort towards risk assessment/crisis management. The authors hope that the study will highlight the severity of the risk posed by the industry and thus generate safety consciousness among plant managers. The study may also help in developing accident-prevention strategies and the installation of damage control devices.     

New methodologies for security risk assessment of oil and gas industry

The oil and gas industry forms a vital and large part of the economy of any country. It provides crucial support to transport, manufacturing and energy sectors, produces valuable exports and provides huge employment. This industry along with fertilizer plants, petrochemical plants, etc., which handle hazardous chemicals, are potential targets for deliberate actions by terrorists, criminals and disgruntled employees. The process industries face different levels of threats. It is imperative to analyze the entire threat scenario before taking steps to counter it, otherwise each and every threat will have to be treated as most severe, thus resulting in a huge and wasteful expenditure.The Security Risk Factor Table (SRFT) and a Stepped Matrix Procedure (SMP) have been developed to assess the security risk of oil and gas industry as well as the other chemical process industries. While the SRFT deals with the effects of individual threats, the SMP deals with the cascading/domino effects which a lone, low probability event can cause. A case study of a refinery has been performed to show the application of the ideas presented.     

Quantitative risk assessment of domino effect in Natech scenarios triggered by lightning

Lightning strike is the natural event more frequency causing Natech accidents involving atmospheric storage tanks. Despite the resulting fires have usually limited severity and only local effects, domino effect may cause the escalation of these primary events, possibly affecting nearby pressurized storages and process equipment, thus resulting in relevant increase in the potential area impacted. A methodology was developed for the quantitative assessment of risk due to domino effects caused by Natech accidents triggered by lightning. A comprehensive procedure was obtained, tailoring lightning risk assessment to include probabilistic models for domino escalation based on probit approach and combinatorial analysis. The methodology was applied to a case-study to evidence the shift in risk figures due to domino effect and the credibility of the secondary domino scenarios. The results of the case-study show that an increase up to two orders of magnitude with respect to risk calculated for conventional scenarios is possible when considering lightning-induced Natech primary scenarios and their escalation.