Survey of household waste composition and quantities in Abuja,Nigeria

Inadequate management of household solid waste is a serious problem in many developing cities. The study aimed to evaluate the quantities and composition of household solid waste generation in Abuja within different socioeconomic groups. The wastes from 74 households across different socioeconomic levels in Abuja were collected, weighted and classified on a daily basis for seven days in February 2012. The result showed that the average daily per capita household waste generation is 0.634 kg/capita/day. The characteristic of solid waste in Abuja are typical for the developing cities and dominated by organic waste. Households waste consisted of 63.6% organic waste, 9.7% paper, 8.7% plastics, 3.2% metal, 2.6% glass, 1.6% textile and 10.6% others (unclassified) and the bulk density was 240 kg/m³. The evaluation of relationship between income and daily per capita household waste generation showed a positive relationship. The study revealed a statistically significant difference between household size and daily per capita household waste generation in high-income group; a slight significant difference between household size and daily per capita household waste generation in medium income group and no statistically significant difference between household size and daily per capita household waste generation in low-income group.     

Performance assessment for municipal solid waste collection in Taiwan

Collecting municipal solid waste (MSW) is a major and expensive task for local waste management authorities, thus efficient MSW collection is a necessity. This study presents a procedure for developing an aggregate indicator (AI) to assess MSW collection efficiency based on multiple factors. The applicabilities of various key performance indicators (KPIs) are evaluated based on five selection criteria, and five KPIs are chosen to form the AI. The relative efficiencies of local MSW collection services are analyzed by the data envelopment analysis (DEA) method. A set of common weights for all five KPIs is then generated based on DEA results and four selection rules by modifying a previous approach. Finally, the proposed AI is applied to assess the MSW collection services provided by 307 local governments in Taiwan, and associated results are compared and discussed.     

Overview of household solid waste recycling policy status and challenges in Malaysia

With the annual increase in waste generation and heavy reliance on landfilling as disposal, method in Malaysia, it is just a matter of time before significant problems of space limitations, health, and environmental issues hit the nation severely. This paper attempts to develop an overview on solid, waste recycling in Malaysia at the most basic level of a community or nation which is the household, unit. Households are the main primary source of municipal solid waste in Malaysia, consisting of, recyclable materials at most 70% to 80% of the total waste composition as found placed in the, landfills. Overview on the existing household solid waste recycling policy and program status in, Malaysia is relevant in enhancing solid waste management measure from recycling perspective. Despite the high potential and opportunities for solid waste recycling, wastes are still simply being, dumped in an open area of ground without any attempt for recovery and recycling. Comparing to, recycling rates of neighboring countries, Malaysia is falling back at merely 5% which proves how, uncommon recycling practice is. The government is committed to significantly improve the national's, solid waste management services especially in waste minimization. Fortunately the emphasis on, recycling as a sustainable waste management strategy has taken a shift in paradigm as wastes, separation and recycling are part of the major changes in the current policy implementation. With, issues and challenges in recycling practice that were highlighted in this context especially from the, aspects of information availability and other loopholes within solid waste management policies and, related recycling program within the community, the question on whether the goals in 2020 can be, met remains unsure of but there is a possibility for a successful implementation of sustainable solid, waste management particularly in recycling.     

Identifying the key factors in increasing recycling and reducing residual household waste: a case study of the Flemish region of Belgium

The competent waste authority in the Flemish region of Belgium created the 'Implementation plan household waste 2003-2007' and the 'Implementation plan sustainable management 2010-2015' to comply with EU regulation. It incorporates European and regional requirements and describes strategies, goals, actions and instruments for the collection and treatment of household waste. The central mandatory goal is to reduce and maintain the amount of residual household waste to 150 kg per capita per year between 2010-2015. In literature, a reasonable body of information has been published on the effectiveness and efficiency of a variety of policy instruments, but the information is complex, often contradictory and difficult to interpret. The objective of this paper is to identify, through the development of a binary logistic regression model, those variables of the waste collection scheme that help municipalities to reach the mandatory 150 kg goal. The model covers a number of variables for household characteristics, provision of recycling services, frequency of waste collection and charging for waste services. This paper, however, is not about waste prevention and reuse. The dataset originates from 2003. Four out of 12 variables in the model contributed significantly: income per capita, cost of residual waste collection, collection frequency and separate curbside collection of organic waste.     

The influence of collection facility attributes on household collection rates of electronic waste: The case of televisions and computer monitors

In the US, household electronic waste collected for recycling is primarily by voluntary drop-off at designated collection facilities. This study examines the influence of specific collection facility attributes (recycling fees charged, number of days open, and driving distance) on the household collection rate of e-waste in the US state of Maine. Data were collected for household computer monitor and television collection for 92 municipal waste transfer facilities representing 30% of the state's population for one year. Results suggest that recycling fees are negatively correlated with the number of televisions and computer monitors collected; furthermore, the more frequently facilities were open, the more televisions and computer monitors were collected per capita. The distance from the facility had no correlation, which prompted an analysis of whether the existence of a curbside collection system in the municipality was influential. Results show a negative correlation between computer monitor and television collection and a municipality having recycling (but not e-waste) curbside collection. Based on the results of this study, policymakers may be able to increase the collection rate of household e-waste by eliminating or lowering recycling fees, expanding collection days and hours to increase convenience, and/or considering curbside collection of e-waste.     

Assessing the demand of solid waste disposal in urban region by urban dynamics modelling in a GIS environment

The twentieth century saw a dramatic increase in the production of urban solid waste, reflecting unprecedented global levels of economic activity. Despite some efforts to reduce and recover the waste, disposal in landfills is still the most usual destination. However, landfill has become more difficult to implement because of its increasing cost, community opposition to landfill siting, and more restrictive environmental regulations regarding the siting and operation of landfills. Moreover, disposal in landfill is the waste destination method with the largest demand for land, while land is a resource whose availability has been decreasing in urban systems. Shortage of land for landfills is a problem frequently cited in the literature as a physical constraint. Nonetheless, the shortage of land for waste disposal has not been fully studied and, in particular, quantified. This paper presents a method to quantify the relationship between the demand and supply of suitable land for waste disposal over time using a geographic information system and modelling techniques. Based on projections of population growth, urban sprawl and waste generation the method can allow policy and decision-makers to measure the dimension of the problem of shortage of land into the future. The procedure can provide information to guide the design and schedule of programs to reduce and recover waste, and can potentially lead to a better use of the land resource. Porto Alegre City, Brazil was used as the case study to illustrate and analyse the approach. By testing different waste management scenarios, the results indicated that the demand for land for waste disposal overcomes the supply of suitable land for this use in the study area before the year 2050.     

Euro-trash: searching Europe for a more sustainable approach to waste management

How an economically affordable, environmentally effective and socially acceptable municipal solid waste management system can be developed is currently unclear. Considerable research has been carried out on the practical aspects of municipal waste management (i.e. transport, treatment and disposal) and how citizens feel about source separation, recycling, incineration and landfill but the perspective of the waste manager within the context of long term planning is often ignored. In this study, waste managers from 11 different leading-edge European municipal solid waste programs in nine different countries were interviewed. The economic, social, political, environmental, legal and technical factors of their specific programs were explored and analyzed. The transition of municipal solid waste management to urban resources management was observed and key ‘system drivers’ for more sustainable waste management practices were identified. Programs visited were: Brescia (I), Copenhagen (DK), Hampshire (UK), Helsinki (FI), Lahn-Dill-Kreis (D), Malmö (SE), Pamplona (E), Prato (I), Saarbrücken (D), Vienna (A), and Zürich (CH).     

A mixed integer linear programming model for optimisation of organics management in an integrated solid waste system

In this paper, the authors propose a mixed integer linear programming model for designing an Integrated Solid Waste Management System (ISWMS) to meet specific economic goals. The model refers to a set of municipalities, known as ‘local basin’, which have to share a common waste management system. At the municipal level the model allows for an identification of the optimal collection service option; at the local basin level, the model provides the optimal waste flow appropriate to the collection service option of each municipality. The model has been applied to a full-scale case study of an area located in southeast Italy. A scenario analysis was carried out to investigate alternative municipal solid waste management options, which fundamentally differ in the organic flow mass rate to be either collected and composted or landfilled. Findings show that an increase in the cost of landfilling determines the optimal collection scenario and the configuration plants tend to recover higher rates of organics in separate collection and thus higher refuse derived fuel productions. The results obtained validate the application of the model in both the strategic planning and operational phases, by supporting public administrators at both municipality and local basin level in decision making and evaluation of technical and economic performances of ISWMSs.     

Management of urban solid waste: Vermicomposting a sustainable option

Solid waste management is a worldwide problem and it is becoming more and more complicated day by day due to rise in population, industrialization as well as changes in our life style. Presently most of the waste generated is either disposed of in an open dump in developing countries or in landfills in the developed ones. Landfilling as well as open dumping requires lot of land mass and could also result in several environmental problems. Land application of urban/municipal solid waste (MSW) can be carried out as it is rich in organic matter and contains significant amount of recyclable plant nutrients. The presence of heavy metals and different toxics substances restricts its land use without processing. Vermicomposting of MSW, prior to land application may be a sustainable waste management option, as the vermicast obtained at the end of vermicomposting process is rich in plant nutrients and is devoid of pathogenic organism. Utilization of vermicast produced from urban/municipal solid waste in agriculture will facilitate in growth of countries economy by lowering the consumption of inorganic fertilizer and avoiding land degradation problem. Vermicomposting of urban/MSW can be an excellent practice, as it will be helpful in recycling valuable plant nutrients. This review deals with various aspects of vermicomposting of MSW.     

Alternative treatments for the municipal solid waste and domestic sewage in Campinas,Brazil

The treatments of municipal solid waste (MSW) and the domestic sewage (DS) are critical issues of the current political and environment discussions. These concerns are due to the lack of dumping areas, the continuous increase of the population, and public health issues. The adequate treatment and management of MSW and DS can produce many benefits such as financial funds, heat and energy production, reduction of emissions and recuperation of water for reuse. Currently in Campinas MSW and DS are deposited in landfills or discharged into rivers and other sites. In the present study two scenarios are evaluated for the treatment of MSW and DS in Campinas: recycling with biological treatment and recycling with thermal treatment. The most suitable treatments for Campinas, based on the data from the present analysis and taking into consideration the local conditions, maximization of energy potential and environmental benefits, are incineration for the MSW and biological treatment for DS, both with energy recuperation. The main gains of this option are substantial environmental benefits, generated energy which can reach 18% of the total electrical energy consumed in Campinas while about 53% recuperation of the total amount of water treated for Campinas in 2010.     

Multiple regression models for the lower heating value of municipal solid waste in Taiwan

A multiple regression analysis was used to develop two predictive models of lower heating value (LHV) for municipal solid waste (MSW), using 180 samples gathered from cities and counties in Taiwan during 2001-2002. These models are referred to as the original proposed model (OPM) and the simplified model (SM). The coefficients of multiple determinations for the OPM and SM were 0.983 and 0.975, respectively. To verify the feasibility of the models, a demonstration program based on sampling of MSW in Kaohsiung City was conducted. As a result, the OPM showed superior precision in terms of relative percentage deviation (RPD) and mean absolute percentage error (MAPE), when compared to the conventional models based on the proximate analysis, physical composition and ultimate analysis. The SM was derived by neglecting the three minor physical components used in the OPM. The resulting SM was less precise when compared to the OPM, but it was still acceptable, with a precision level better than the conventional models. It was concluded that the predictability of empirical models could be improved significantly through selection of the appropriate physical components and multiple regression analysis.     

Clean fuels from municipal solid waste for fuel cell buses in metropolitan areas

Increasing volumes of municipal solid waste (MSW) pose disposal problems for many cities. Costs are rising as landfilling becomes more difficult. The production of clean transportation fuels (methanol or hydrogen) from MSW is one economically and environmentally promising option for dealing with these problems. An attractive feature is that elimination of essentially all air pollutant emissions is inherent in the process. Current and future air emissions standards should be easily met. Methanol or hydrogen used in fuel cell vehicles (FCV) can help address problems of deteriorating urban air quality due to vehicle pollution and heavy dependence of the transport sector on imported petroleum. Buses are initial targets for commercial application of fuel cells. Coupled with FCVs, MSW could become a major transportation energy resource. For example, less than 25% of New York City's MSW supply would be sufficient to produce the methanol or hydrogen needed to fuel the entire city's bus fleet, if the buses were fuel cell powered. Estimated breakeven tipping fees required for hydrogen or methanol from MSW to compete with the cost of these fuels made from natural gas today are $52 to $89/raw tonne MSW for hydrogen and $64 to $104/raw tonne MSW for methanol (in 1991$), depending on the gasification technology considered. For comparison, the average tipping fee today in New York City is $74/tonne (1991$). Because of the high fuel economies expected for fuel cell buses, total lifecycle costs per bus-km could be lower than for conventional diesel-engine buses.     

Municipal solid waste generation in Kathmandu, Nepal

Waste stream characteristics must be understood to tackle waste management problems in Kathmandu Metropolitan City (KMC), Nepal. Three-stage stratified cluster sampling was used to evaluate solid waste data collected from 336 households in KMC. This information was combined with data collected regarding waste from restaurants, hotels, schools and streets. The study found that 497.3 g capita(-1) day(-1) of solid waste was generated from households and 48.5, 113.3 and 26.1 kg facility(-1) day(-1) of waste was generated from restaurants, hotels and schools, respectively. Street litter measured 69.3 metric tons day(-1). The average municipal solid waste generation rate was 523.8 metric tons day(-1) or 0.66 kg capita(-1) day(-1) as compared to the 320 metric tons day(-1) reported by the city. The coefficient of correlation between the number of people and the amount of waste produced was 0.94. Key household waste constituents included 71% organic wastes, 12% plastics, 7.5% paper and paper products, 5% dirt and construction debris and 1% hazardous wastes. Although the waste composition varied depending on the source, the composition analysis of waste from restaurants, hotels, schools and streets showed a high percentage of organic wastes. These numbers suggest a greater potential for recovery of organic wastes via composting and there is an opportunity for recycling. Because there is no previous inquiry of this scale in reporting comprehensive municipal solid waste generation in Nepal, this study can be treated as a baseline for other Nepalese municipalities.     

FSILP: fuzzy-stochastic-interval linear programming for supporting municipal solid waste management

Although many studies on municipal solid waste management (MSW management) were conducted under uncertain conditions of fuzzy, stochastic, and interval coexistence, the solution to the conventional linear programming problems of integrating fuzzy method with the other two was inefficient. In this study, a fuzzy-stochastic-interval linear programming (FSILP) method is developed by integrating Nguyen's method with conventional linear programming for supporting municipal solid waste management. The Nguyen's method was used to convert the fuzzy and fuzzy-stochastic linear programming problems into the conventional linear programs, by measuring the attainment values of fuzzy numbers and/or fuzzy random variables, as well as superiority and inferiority between triangular fuzzy numbers/triangular fuzzy-stochastic variables. The developed method can effectively tackle uncertainties described in terms of probability density functions, fuzzy membership functions, and discrete intervals. Moreover, the method can also improve upon the conventional interval fuzzy programming and two-stage stochastic programming approaches, with advantageous capabilities that are easily achieved with fewer constraints and significantly reduces consumption time. The developed model was applied to a case study of municipal solid waste management system in a city. The results indicated that reasonable solutions had been generated. The solution can help quantify the relationship between the change of system cost and the uncertainties, which could support further analysis of tradeoffs between the waste management cost and the system failure risk.     

Exploring full cost accounting approach to evaluate cost of MSW services in India

Municipal solid waste (MSW) services of developing countries often suffer due to the lack of financial and operational autonomy, scientific approach, and adequate levels of resources. The solid waste management (SWM) practices of developed countries are benefited in cost and efficiency due to the participation of private players and sound financial management. However, developing economies depend on local municipalities to own and operate SWM services amidst structural and financial inefficiency. With the demands of augmenting efficient and cost-effective SWM services to the expanding population of cities and towns of newly industrialized nations on the rise, the municipalities in these countries are under pressure to adopt ways and means that can support efficient utilization of resources and improved decision-making capabilities. This research article reflects the current state of the MSW services in India and explores full cost accounting (FCA) framework in its ability to generate information on cost-related aspects and sustainable deployment of resources. Lastly, the extensibility of FCA is tested by integrating externalities of MSW services.     

Options for management of municipal solid waste in New York City: a preliminary comparison of health risks and policy implications

Landfill disposal and waste-to-energy (WTE) incineration remain the two principal options for managing municipal solid waste (MSW). One critical determinant of the acceptability of these options is the different health risks associated with each. In this analysis relying on published data and exposure modeling, we have performed health risk assessments for landfill disposal versus WTE treatment options for the management of New York City's MSW. These are based on the realistic scenario of using a waste transfer station (WTS) in Brooklyn and then transporting the untreated MSW by truck to a landfill in Pennsylvania or using a WTE facility in Brooklyn and then transporting the resultant ash by truck to a landfill in Pennsylvania. The overall results indicate that the individual cancer risks for both options would be considered generally acceptable, although the risk from landfilling is approximately 5 times greater than from WTE treatment; the individual non-cancer health risks for both options would be considered generally unacceptable, although once again the risk from landfilling is approximately 5 times greater than from WTE treatment. If one considers only the population in Brooklyn that would be directly affected by the siting of either a WTS or a WTE facility in their immediate neighborhood, individual cancer and non-cancer health risks for both options would be considered generally acceptable, but risks for the former remain considerably higher than for the latter. These results should be considered preliminary due to several limitations of this study such as: consideration of risks only from inhalation exposures; assumption that only volume and not composition of the waste stream is altered by WTE treatment; reliance on data from the literature rather than actual measurements of the sites considered, assuming comparability of the sites. However, the results of studies such as this, in conjunction with ecological, socioeconomic and equity considerations, should prove useful to environmental managers, regulators, policy makers, community representatives and other stakeholders in making sound and acceptable decisions regarding the optimal handling of MSW.     

An evaluation of four key methods for monitoring household waste prevention campaigns in the UK

Household waste prevention in England has been recognised in national strategy as a key component for future sustainable practice. To support the policy agenda, the Department of Environment, Food and Rural Affairs (Defra) in England has funded an extensive programme of fundamental research in the area. The specific research aim reported on here, in this Defra funded project, was to trial and assess methods for monitoring and evaluating approaches detailed in the National Resource and Waste Forum (NRWF)’s Household Waste Prevention Toolkit. The methods that formed the basis for the four research Objectives for the project were: using pilot and control areas (core Objective), tracking waste arisings, measuring specific activities and declared awareness and behaviour surveys. A primary objective of this research was to quantify the direct waste tonnage impacts of implementing a targeted household waste campaign in Dorset County, UK. A key performance indicator chosen for this assessment was the weight of waste collected at the kerbside from households. In an area where a waste prevention campaign is well planned and implemented then reductions in household waste arisings in pilot areas can be in the region of 2% per annum. This method for monitoring can be used, in the hands of an expert project team, to communicate to the public the direct benefits of waste prevention. It was found that there are a wide range of factors that need to be taken into account in the UK, and that these had hitherto been given little prominence, such as careful matching of pilot and control areas – this proved problematical in this research. However, a range of techniques used to support the methods, e.g. doorstepping surveys and focus groups could not show clear attributable waste prevention impacts but their findings could be used to direct new future messages to the public. The most successful and measurable campaign activities that were revealed by evaluation were: mail preference registrations, Home composting and doorstepping. An expert evaluation of all major methods found that no clear preference was revealed as to which were the most useful. None of the methods were judged very poor neither very good, all had major issues about their use. Tracking waste arisings and focus groups were assessed to be the best techniques in terms of input effort to output value. It is likely that waste prevention teams for household waste will need very careful training in the cost-effective use of the NRWF Toolkit before they are competent to apply it to a given place; the issues are more complex than were first thought.     

A two-stage support-vector-regression optimization model for municipal solid waste management - a case study of Beijing, China

In this study, a two-stage support-vector-regression optimization model (TSOM) is developed for the planning of municipal solid waste (MSW) management in the urban districts of Beijing, China. It represents a new effort to enhance the analysis accuracy in optimizing the MSW management system through coupling the support-vector-regression (SVR) model with an interval-parameter mixed integer linear programming (IMILP). The developed TSOM can not only predict the city's future waste generation amount, but also reflect dynamic, interactive, and uncertain characteristics of the MSW management system. Four kernel functions such as linear kernel, polynomial kernel, radial basis function, and multi-layer perception kernel are chosen based on three quantitative simulation performance criteria [i.e. prediction accuracy (PA), fitting accuracy (FA) and over all accuracy (OA)]. The SVR with polynomial kernel has accurate prediction performance for MSW generation rate, with all of the three quantitative simulation performance criteria being over 96%. Two cases are considered based on different waste management policies. The results are valuable for supporting the adjustment of the existing waste-allocation patterns to raise the city's waste diversion rate, as well as the capacity planning of waste management system to satisfy the city's increasing waste treatment/disposal demands.     

The future place of recycling in household waste policy: the case of France

To be rightly implemented, an environmental policy ought to set an institutional framework (goals, rules and instruments) which incents decentralised actors to adopt the appropriate range of technologies. In the household waste management policy, the development of valorisation techniques (and particularly recycling) must be supported by convenient instruments and incentives. The paper analyses the problems encountered with the French household waste policy to ensure the takeoff of recycling techniques. At the moment, a rather under-proportioned institutional setting leads to favour the adoption of incineration with energy recovery at the expenses of recycling. This tends to create a structural bias in favour of incineration.