有毒化学物质对DNA的损伤——生成DNA加成物

本文涉及了环境中各种重要类型的化学致癌物并着重讨论了潜在致癌物与DNA加成物的化学反应及其生物影响,它包括简单烷化剂、简单非烷化剂以及代谢活化致突剂。不同烷化剂、简单非烷化剂、代谢活化致突剂与DNA的化学致癌反应部位,无论是在试管中试验还是在活体试验都有很大的不同。特别是N-亚硝基化合物和BaP曾作过详细研究,因为它们只在某个体系的特定器官使之成为恶性。尽管N-硝基化合物对人并不意味着致癌,但它很有可能就是致癌物。相反,某些在动物中致癌性很弱的烷化剂却被列为人体致癌物(氯乙烯、芥子气)或者人体可能的致癌物(硫酸二甲酯、乙烯氧化物)。     

Response surface modelling of Cr6+ adsorption from aqueous solution by neem bark powder: Box–Behnken experimental approach

The main aim of this study is to investigate the combined effect of different operating parameters like adsorbent dose, initial Cr⁶⁺ concentration and pH on the removal of Cr⁶⁺ from aqueous solution using neem bark powder (NBP). A series of batch experiments were performed to find out the adsorption isotherms and kinetic behaviour of Cr⁶⁺ in the aqueous solution. The adsorption process was examined with three independent variables viz. NBP dosage, initial Cr⁶⁺ concentrations and pH. Seventeen batch experiments designed by Box–Behnken using response surface methodology were carried out, and the adsorption efficiency was modelled using polynomial equation as the function of the independent variables. Based on the uptake capacity and economic use of adsorbent, the independent variables were optimized by two procedures. The desirability of first and second optimization procedures were found to be 1.00 and 0.84, respectively, which shows that the estimated function may well represent the experimental model. The kinetic study indicated that the rate of adsorption confirms to the pseudo-second-order rate equation. Thermodynamics study indicated that the adsorption process was spontaneous and endothermic in nature. The surface texture changes in NBP were obtained from FT-IR analysis. The optimized result obtained from RAMP plots revealed that the NBP was supposed to be an effective and economically feasible adsorbent for the removal of Cr⁶⁺ from an aqueous system.     

An investigation of interurban variations in the chemical composition and mutagenic activity of airborne particulate organic matter using an integrated chemical class/bioassay system

Previous investigations in this laboratory have demonstrated that the mutagenic activities of extractable particulate organic matter (EOM) from cities which differ in their principal fuels and meteorology can vary significantly. To gain a better understanding of these interurban variations, an Integrated Chemical Class/Biological Screening System was developed and used for a more detailed examination of differences in the chemical composition and mutagenic activity of EOM. The screening system involved coupling in situ Ames mutagenicity determinations on high performance thin layer chromatography (HPTLC) plates with class specific chemical analyses on a second set of plates. The system was used to screen for mutagenic activity and selected chemical classes (including PAH, nitro-PAH, phenols, carboxylic acids, carbonyls, aza-arenes and alkylating agents) in EOM from the following sites: New York City; Elizabeth, N.J.; Mexico City; Beijing, China; Philadelphia, PA; and the Caldecott Tunnel (CA).The results of this study demonstrated mutagenic activity and chemical compositional differences in HPTLC subfractions of particulate organic matter from these cities and from the Caldecott Tunnel. The greatest interurban differences in chemical classes were observed for the phenols, carbonyl compounds and alkylating agents. Interurban variations in mutagenic activities were greatest for EOM subfractions of intermediate polarity. These differences are probably related to interurban differences in the fuels used, types of sources and atmospheric conditions. The relationships between these variables are not well understood at present.     

Mineralization of CCl4 by the UVC-photolysis of hydrogen peroxide in the presence of methanol

A method for a photochemically induced mineralization of CCl4 is described in which use is made of reductive radicals. The UVC-photolysis (254 nm) of H2O2 added to aqueous solutions of CCl4 is leading to the homolysis of the oxidant yielding hydroxyl radicals (HO) that subsequently react with added methanol to generate hydroxymethyl radicals (CH2OH). The latter radicals initiate mineralization of CCl4 by reductive C-Cl bond splitting. CHCl3, C2Cl4 and C2Cl6 were found as reaction intermediates, but are quantitatively depleted in a parallel oxidative reaction manifold leading to mineralization. Carbon dioxide radical anion, CO2(-), an intermediate in the mineralization pathway of methanol, is also shown to initiate the mineralization of CCl4 by reductive dechlorination. A reaction mechanism is proposed and validated with computer simulations of all the experimental results.     

罐底含油泥热解动力学参数计算方法的优选

在化学反应设计中反应动力学是较重要的因素。为得到更合理的污泥热解动力学参数计算方法,利用热重分析仪,在氮气气氛下对罐底含油污泥的热解特性进行研究。根据热重实验数据,分别采用Coats-Redfern法、Kissinger法、FWO法和Popescu法计算污泥热解动力学参数,并获取罐底泥热解制油的主要阶段(第2阶段)的反应活化能E、频率因子A并分析各种方法反应机理。通过对比不同计算方法得到动力学参数及拟合曲线与实验曲线的相关性,确定了最佳罐底含油污泥热解动力学参数计算方法。研究表明,Popescu法得到罐底泥的热解过程符合Jander方程,活化能E为101.43 kJ/mol,与FWO法得到的91.20 kJ/mol相近,且预测曲线与实验曲线有较好的相关性(0.9816),说明Popescu法计算罐底泥热解动力学参数更合适。     

A mass transfer based method for measuring the reaction coefficients of a photocatalyst

We have developed a new method, the mass transfer based (MTB) method, for measuring the Langmuir–Hinshelwood (L–H) rate form reaction coefficients of photocatalysts. The conventional method for determining the reaction coefficients disregards the effect of mass transfer on the reaction surface by designing and controlling a reaction process to be reaction-limited. In contrast, the new MTB method takes the mass transfer effect into account by using a computational fluid dynamics (CFD) method. The reaction coefficients can be regressed by the measured reaction rates and the calculated VOC concentrations in the air adjacent to the reaction surface. Thus, by using the new method, the reaction coefficient of a reaction process can be accurately determined even if it is not reaction-limited. This is very important in cases where it is difficult to realize reaction-limited processes, such as photocatalytic oxidation of VOCs with strong UV radiation intensity. The relative error of the regressed reaction coefficients obtained by the new method is analyzed. To illustrate, we apply this method to measuring the reaction coefficients of TiO₂ photocatalytic decomposing formaldehyde. This method is very useful in determining the reaction coefficients of the photocatalytic oxidation of various VOCs simultaneously.     

污染土壤电动修复增强方法研究进展

污染土壤电动修复是一项新兴绿色原位修复技术。其原理是在土壤上施加直流电场 ,利用电迁移和电渗去除污染物 ,土壤pH、Zeta电位以及土壤化学性质等因素影响电动修复效果。为了提高修复效率和扩大电动修复应用范围 ,现在已经发展了针对不同类型土壤和污染物的增强修复技术。本文归纳总结了 1995年以来土壤电动修复中常用增强处理效果的 8种方法 ,即酸碱中和法、阳离子选择膜法、电渗析法、络合剂法、表面活性剂法、氧化 还原法、EK 生物联用和LasagnaTM法 ,且对每种方法的典型实验装置、增强原理、方法特点和适用范围等进行了分析和讨论 ,为以后的实验设计提供了有益的参考     

Fe (III) supported on resin as effective catalyst for the heterogeneous oxidation of phenol in aqueous solution

FeIII supported on resin as an effective catalyst for oxidation was prepared and applied for the degradation of aqueous phenol. Phenol was selected as a model pollutant and the catalytic oxidation was carried out in a batch reactor using hydrogen peroxide as the oxidant. The influent factors on oxidation, such as catalyst dosage, H2O2 concentration, pH, and phenol concentration were examined by considering both phenol conversion and chemical oxygen demand (COD) removal. The FeIII-resin catalyst possesses a high oxidation activity for phenol degradation in aqueous solution. The experimental results of this study show that almost 100% phenol conversion and over 80% COD removal can be achieved with the FeIII-resin catalyst catalytic oxidation system. A series of prepared resin were investigated for improving the oxidation efficiency. It was found that the reaction temperature and initial pH in solution significantly affected both of phenol conversion and COD removal efficiency. The activity of the catalyst significantly decreased at high pH, which was similar to the Fenton-like reaction mechanism. Results in this study indicate that the FeIII-resin catalytic oxidation process is an efficient method for the treatment of phenolic wastewater.     

Adsorption and oxidation of fluoroquinolone antibacterial agents and structurally related amines with goethite

Seven members (ciprofloxacin, enrofloxacin, norfloxacin, ofloxacin, lomefloxacin, pipemidic acid, and flumequine) of the popular fluoroquinolone antibacterial agents (FQs) were found to adsorb strongly to goethite with 50-76% of the added FQ adsorbed under the experimental conditions. The adsorption isotherms fitted well to the Langmuir model. Adsorption was accompanied by slow oxidation of the FQs (except for flumequine) by goethite yielding a range of hydroxylated and dealkylated products. The oxidation kinetics showed different stages in reaction rate, mostly likely caused by accumulation of Fe(II) species on the oxide surface that slowed the reaction. Structurally related amines 1-phenylpiperazine, N-phenylmorpholine, aniline, and N,N-dimethylaniline were found to be oxidized by goethite without significant adsorption. The results strongly indicate that the carboxylic group of FQs is critical for adsorption while the piperazine ring is susceptible to oxidation. A radical mechanism is proposed for the oxidation of FQs by goethite which involves formation of a surface complex between the FQ and surface-bound Fe(III) through adsorption, and initial oxidation at the piperazinyl N1 atom to form radical intermediates that ultimately lead to the final products. This study indicates that Fe oxides in aquatic sediments may well play an important role in the natural attenuation of fluoroquinolone antibacterial agents.     

Determination of sulfur oxides formed during the S(IV) oxidation in the presence of iron

The reaction products (i.e., sulfate (SO4(2-)) and dithionate (S2O6(2-))) of S(IV) oxidation in the presence of iron(III) under different experimental conditions were investigated. Ion-interaction chromatography was used for the separation of sulfate and dithionate using tetrabutylammonium hydroxide (TBAOH) as an ion-pair reagent. The chromatographic method was optimized by varying the composition of the mobile phase (i.e., concentration of TBAOH, acetonitrile and Na2CO3) and by varying the flow rate of the mobile phase. The method was successfully applied to the determination of dithionate formed during the S(IV) oxidation in the presence of Fe(III). In air-saturated solutions sulfate was observed as the only product, while in N2-saturated solutions dithionate was also determined, but it is the minor reaction product and represents about 4% of the total amount of oxidized HSO3- under the studied conditions.     

Experimental determination of the kinetic rate law for the oxidation of perchloroethylene by potassium permanganate

Flushing soils contaminated with trichloroethylene (TCE) and perchloroethylene (PCE) with a permanganate (MnO₄⁻) solution has been shown to reduce the solvent content of the soil. Experiments were performed to quantify the rate at which KMnO₄ oxidizes aqueous solutions of PCE over a range of concentrations. In a series of homogeneous reactors, aqueous phase PCE concentrations were monitored over time in nine experimental trials with excess oxidant concentrations ranging from 5 to 30 g/l. Analysis of the data was performed to quantify the oxidation reaction order with respect to PCE and KMnO₄ and the reaction rate constant. The reaction between PCE and KMnO₄ was determined to be first-order with respect to both PCE and KMnO₄ with an overall specific reaction rate coefficient of 2.45±0.65 M⁻¹ min⁻¹.     

Abiotic reduction reactions of anthropogenic organic chemicals in anaerobic systems: A critical review

This review is predicated upon the need for a detailed process-level understanding of factors influencing the reduction of anthropogenic organic chemicals in natural aquatic systems. In particular, abiotic reductions of anthropogenic organic chemicals are reviewed. The most important reductive reaction is alkyl dehalogenation (replacement of chloride with hydrogen) which occurs in organisms, sediments, sewage sludge, and reduced iron porphyrin model systems. An abiotic mechanism involving a free radical intermediate has been proposed. The abstraction of vicinal dihalides (also termed dehalogenation) is another reduction that may have an abiotic component in natural systems. Reductive dehalogenation of aryl halides has recently been reported and further study of this reaction is needed. Several other degradation reactions of organohalides that occur in anaerobic environments are mentioned, the most important of which is dehydrohalogenation. The reduction of nitro groups to amines has also been thoroughly studied. The reactions can occur abiotically, and are affected by the redox conditions of the experimental system. However, a relationship between nitro-reduction rate and measured redox potential has not been clearly established. Reductive dealkylation of the N- and O-heteroatom of hydrocarbon pollutants has been observed but not investigated in detail. Azo compounds can be reduced to their hydrazo derivatives and a thorough study of this reaction indicates that it can be caused by extracellular electron transfer agents. Quinone-hydroquinone couples are important reactive groups in humic materials and similar structures in resazurin and indigo carmine make them useful as models for environmental redox conditions. The interconversion of sulfones, sulfoxides, and sulfides is a redox process and is implicated in the degradation of several pesticides though the reactions need more study. Two reductive heterocyclic cleavage reactions are also mentioned. Finally, several difficulties (both semantic and experimental) that recur in the studies reviewed are discussed. The subtle effects of various sterilization techniques on extracellular biochemicals and complex chemical reducing agents in sediment have stifled attempts to separate abiotic from biological degradation reactions. The characterization of redox conditions in a natural system is still problematic since measured redox potential is not adequate. Suggestions for future research toward a process-level understanding of abiotic chemical reductions are made.     

Mechanism and kinetic model for the decolorization of the azo dye Reactive Black 5 by hydrogen peroxide and UV radiation

A kinetic model for the decolorization of C.I. Reactive Black 5 by the combination of hydrogen peroxide and UV radiation was developed based on experimental results and known chemical and photochemical reactions. The observed kinetic reaction coefficient was determined and correlated as a function of hydrogen peroxide concentration and UV intensity. The validity of the rate expression was tested experimentally in a parameterization study. The decolorization rate follows pseudo-first order kinetics with respect to dye concentration. The rate increases linearly with UV intensity and nonlinearly with increasing hydrogen peroxide concentration, going from a linear relationship at low H(2)O(2) concentrations to a maximum as hydrogen peroxide concentration continues to increase. The decolorization rate expression derived from the proposed reaction mechanism was reconciled with that used for correlating the experimental data.     

Validation of an evacuated canister method for measuring part-per-billion levels of chemical warfare agent simulants

The National Institute for Occupational Safety and Health (NIOSH) research on direct-reading instruments (DRIs) needed an instantaneous sampling method to provide independent confirmation of the concentrations of chemical warfare agent (CWA) simulants. It was determined that evacuated canisters would be the method of choice. There is no method specifically validated for volatile organic compounds (VOCs) in the NIOSH Manual of Analytical Methods. The purpose of this study was to validate an evacuated canister method for sampling seven specific VOCs that can be used as a simulant for CWA agents (cyclohexane) or influence the DRI measurement of CWA agents (acetone, chloroform, methylene chloride, methyl ethyl ketone, hexane, and carbon tetrachloride [CCl4]). The method used 6-L evacuated stainless-steel fused silica-lined canisters to sample the atmosphere containing VOCs. The contents of the canisters were then introduced into an autosampler/preconcentrator using a microscale purge and trap (MPT) method. The MPT method trapped and concentrated the VOCs in the air sample and removed most of the carbon dioxide and water vapor. After preconcentration, the samples were analyzed using a gas chromatograph with a mass selective detector. The method was tested, evaluated, and validated using the NIOSH recommended guidelines. The evaluation consisted of determining the optimum concentration range for the method; the sample stability over 30 days; and the accuracy, precision, and bias of the method. This method meets the NIOSH guidelines for six of the seven compounds (excluding acetone) tested in the range of 2.3-50 parts per billion (ppb), making it suitable for sampling of these VOCs at the ppb level.     

A simple spectrophotometric method for the determination of cobalt in industrial, environmental, biological and soil samples using bis(salicylaldehyde)orthophenylenediamine

Bis(salicylaldehyde)orthophenylenediamine (BSOPD) has been proposed as new analytical reagent for the direct non-extractive spectrophotometric determination of cobalt. It reacts with cobalt in slightly acidic (0.0002-0.001 M H(2)SO(4)) 50% 1,4-dioxanic medium to form a red-orange chelate with a molar ratio 1:1. The reaction is instantaneous and the maximum absorbance was obtained at 458 nm and remains constant for over 24h. The average molar absorption coefficient and Sandell's sensitivity were found to be 1.109 x 10(4)l mol(-1)cm(-1) and 20 ng cm(-2) of Co(II), respectively. Linear calibration graph was obtained for 0.1-15 mg l(-1) of Co(II) with a correlation coefficient value of 0.995 for Co-BSOPD complex. Large excess of 44 cations, anions and complexing agents do not interfere in the determination. The method was successfully used in the determination of cobalt(II) from synthetic mixture and certified reference materials for the purpose of validating the method and the results of analyses were found to be excellent agreement with those of actual values. This developed method was also used for determination of cobalt in some environmental waters (potable and polluted), biological (blood and urine) and soil samples and solution containing both cobalt(II) and cobalt(III). The results of the proposed method for biological samples were comparable with AAS and were found to be in good agreement. The method has high precision and accuracy (s=+/-0.01 for 0.5 mg l(-1)).     

Intake fraction distributions for benzene from vehicles in the Helsinki metropolitan area

The intake fraction (iF) gives a measure of the portion of a source's emissions that is inhaled by an exposed population over a defined period of time. This study examines spatial and population-based iF distributions of a known human carcinogen, benzene, from a ubiquitous urban source, local vehicular traffic, in the Helsinki Metropolitan Area using three computational methods. The first method uses the EXPAND model (EXPosure to Air pollution, especially to Nitrogen Dioxide and particulate matter), which incorporates spatial and temporal information on population activity patterns as well as urban-scale and street canyon dispersion models to predict spatial population exposure distributions. The second method uses data from the personal monitoring study EXPOLIS (Air Pollution Exposure Distributions of Adult Urban Populations in Europe) to estimate the intake fractions for individuals in the study. The third method, a one-compartment box model provides estimates within an order-of-magnitude or better for non-reactive agents in an urban area. Population intake fractions are higher using the personal monitoring data method (median iF 30 per million, mean iF 39 per million) compared with the spatial model (annual mean iF 10 per million) and the box model (median iF 4 per million, mean iF 7 per million). In particular, this study presents detailed intake fraction distributions on several different levels (spatial, individual, and generic) for the same urban area.     

Development of expanded and core kinetic models for the gas phase formation of dioxins from chlorinated phenols

Expanded, 45 reaction, and core, 12 reaction, kinetic models have been developed that account for the major features in the homogeneous formation of polychlorinated dibenzo-p-dioxins (PCDD) from the oxidation of 2,4,6-trichlorophenol (P). The expanded and core schemes provide good agreement between experimental and calculated yields of PCDDs using the CHEMKIN combustion package or the React kinetic program, respectively. Steady-state approximations of the reaction kinetic models including radical-molecule and radical-radical formation pathways of PCDD, as well as oxidative destruction pathways of chlorinated phenoxyl radicals, reveal a competition between reactions of chlorinated phenoxyl radicals with chlorinated phenols, recombination reactions of chlorinated phenoxyl mesomers, and destruction/decomposition of phenoxyl radicals.     

Comparison of bioaugmentation and biostimulation for the enhancement of dense nonaqueous phase liquid source zone bioremediation.

Two 11.7-m(3) experimental controlled release systems (ECRS), packed with sandy model aquifer material and amended with tetrachloroethene (PCE) dense nonaqueous phase liquid (DNAPL) source zone, were operated in parallel with identical flow regimes and electron donor amendments. Hydrogen Releasing Compound (Regenesis Bioremediation Products, Inc., San Clemente, California), and later dissolved lactate, served as electron donors to promote dechlorination. One ECRS was bioaugmented with an anaerobic dechlorinating consortium directly into the source zone, and the other served as a control (biostimulated only) to determine the benefits of bioaugmentation. The presence of halorespiring bacteria in the aquifer matrix before bioaugmentation, shown by nested polymerase chain reaction with phylogenetic primers, suggests that dechlorinating catabolic potential may be somewhat widespread. Results obtained corroborate that source zone reductive dechlorination of PCE is possible at near field scale and that a system bioaugmented with a competent halorespiring consortium can enhance DNAPL dissolution and dechlorination processes at significantly greater rates than in a system that is biostimulated only.     

Determining conditional stability constants for Pb complexation by carboxymethyl-beta-cyclodextrin (CMCD)

Carboxymethyl-beta-cyclodextrin (CMCD) has been proposed for remediation of metal-contaminated sediments. This research presents stability constants for CMCD-lead complexes, and demonstrates a rigorous methodology for estimating stability constants for metal-complexing agents. The conditional stability constant for the lead-CMCD aqueous complex was determined to be 10(5.18) with the 95% confidence interval ranging from 10(5.14) to 10(5.22). The best fit for experimental data was made by assuming a reaction between divalent CMCD(2-) and Pb(2+) and using the WATEQ activity coefficient formulation. The optimized value was derived from experimental data with the geochemical model PHREEQC coupled to UCODE_2005, a parameter optimization program. Like FITEQL, UCODE has a built-in option to optimize parameter values by minimizing the weighted sum of squared residuals (WSSR). However, our approach not only allows rapid, automatic optimization of the stability constant, but also allows determination of uncertainties in estimated parameter values and statistical analysis to assess the appropriateness of the conceptual model. The automation of the process allows testing of multiple conceptual models and the final values produced are internally consistent with the PHREEQC database. In this case five different conceptual models to describe the metal complexation and protonation reactions of CMCD were considered.     

Persulfate oxidation for in situ remediation of TCE. II. Activated by chelated ferrous ion

In situ chemical oxidation (ISCO) is a technique used to remediate contaminated soil and groundwater systems. It has been postulated that sodium persulfate (Na2S2O8) can be activated by transition metal ions such as ferrous ion (Fe2+) to produce a powerful oxidant known as the sulfate free radical (SO4-*) with a redox potential of 2.6 V, which can potentially destroy organic contaminants. In this laboratory study persulfate oxidation of dissolved trichloroethylene (TCE) was investigated in aqueous and soil slurry systems under a variety of experimental conditions. A chelating agent (i.e., citric acid) was used in attempt to manipulate the quantity of ferrous ion in solution by providing an appropriate chelate/Fe2+ molar ratio. In an aqueous system a chelate/Fe2+ molar ratio of 1/5 (e.g., S2O8(2)-/chelate/Fe2+/TCE ratio of 20/2/10/1) was found to be the lowest acceptable ratio to maintain sufficient quantities of Fe2+ activator in solution resulting in nearly complete TCE destruction after only 20 min. The availability of Fe2+ appeared to be controlled by adjusting the molar ratio of chelate/Fe2+. In general, high levels of chelated ferrous ion concentrations resulted in faster TCE degradation and more persulfate decomposition. However, if initial ferrous ion contents are relatively low, sufficient quantities of chelate must be provided to ensure the chelation of a greater percentage of the limited ferrous ion present. Citric acid chelated ferrous ion appeared effective for TCE degradation within soil slurries but required longer reaction times. Additionally, the use of citric acid without the addition of supplemental Fe2+ in soil slurries, where the citric acid apparently extracted native metals from the soil, appeared to be somewhat effective at enhancing persulfate oxidation of TCE over extended reaction times. A comparison of different chelating agents revealed that citric acid was the most effective.