Potentially toxic metals in ombrotrophic peat along a 400 km English-Scottish transect

Four samples of ombrotrophic peat were collected from each of 10 upland locations in a transect from the southern Pennines to the Highland Boundary Fault, a total distance of ca. 400 km. Bulk compositions and other properties were determined. Total contents of Al and heavy metals (Ni, Cu, Zn, Cd, Pb) were determined following digestion with hydrofluoric acid, and concentrations of metals extractable with dilute nitric acid were also measured. Supernatants obtained from aqueous extractions of the peat samples were analysed for pH, major cations and anions, dissolved organic carbon and dissolved metals, and concentrations of free metal ions (Al(3+), Ni(2+), etc.) were estimated by applying a chemical speciation model. Both total and HNO(3)-extractable metal concentrations varied along the transect, the highest values being found at locations close to industrial and former mining areas. The HNO(3)-extractable soil metal contents of Ni, Cu and Cd were appreciably lower than lowest-observed-effect-concentrations (LOEC) for toxicity towards microorganisms in acid, organic rich soils. However, the contents of Zn at two locations, and of Pb at five locations exceeded LOECs, suggesting that they may be exerting toxic effects in the peats. Soil solution concentrations of free heavy metal ions (Cu(2+), Zn(2+), Cd(2+), Pb(2+)) were substantially lower than LOECs for toxicity towards vascular plants, whereas concentrations of Al(3+) were near to toxic levels at two locations.     

Metals in bulk deposition and surface waters at two upland locations in northern England

Concentrations of aluminium and minor metals (Mn, Ni, Cu, Zn, Sr, Cd, Ba, Pb) were measured in precipitation and surface water at two upland locations (Upper Duddon Valley, UDV; Great Dun Fell, GDF) in northern England for 1 year commencing April 1998. At both locations, the loads in bulk precipitation were at the lower ends of ranges reported for other rural and remote sites, for the period 1985-1995. The deposited metals were mostly in the dissolved form, and their concentrations tended to be greatest when rainfall volumes were low. The concentrations of Cu, Zn and Pb in deposition were correlated (r2 > or = 0.40) with concentrations of non-marine sulphate. Three streams, ranging in mean pH from 5.07 to 7.07, and with mean concentrations of dissolved organic carbon (DOC) < 1 mg l(-1). were monitored at UDV, and two pools (mean pH 4.89 and 6.83, mean DOC 22 and 15 mg l(-1)) at GDF. Aluminium and the minor metals were mainly in the dissolved form, and in the following ranges (means of 49-51 samples. microg l(-1)): Al 36-530. Mn 4.4-36, Ni 0.26-2.8, Cu 0.25-1.7, Zn 2.1-30, Cd 0.03-0.16, Ba 1.9-140, Pb 0.10-4.5. Concentrations were generally higher at GDF. Differences in metal concentrations between the two locations and between waters at each location, and temporal variations in individual waters, can be explained qualitatively in terms of sorption to solid-phase soil organic matter and mineral surfaces, complexation and transport by DOC, and chemical weathering. The UDV catchments are sinks for Pb and sources of Al, Mn, Sr, Cd and Ba. The GDF catchments are sources of Al, Mn, Ni, Zn, Sr, Cd and Ba. Other metals measured at the two locations are approximately in balance. Comparison of metal:silicon ratios in the surface waters with values for silicate rocks indicates enrichment of Ni and Cu, and substantial enrichment of Zn, Cd and Pb. These enrichments, together with high metal deposition in the past, make it likely that concentrations of the metals in the surface waters are governed by release from catchment pools of atmospherically-deposited metal. The catchments appear to be responding on a time scale of decades, possibly centuries, to changes in metal deposition. For the more acid waters at UDV, the calculated free-ion concentrations of Al are similar to published LC50 values for acute toxicity towards fish. The free-ion concentrations of Ni, Cu, Zn and Cd in all the surface waters are one-to-four orders of magnitude lower than reported LC50 values for fish.     

Heavy metal concentrations in marine molluscs from the Moroccan coastal region

Mussels (Mytilus galloprovincialis), clams (Venerupis decussatus) and oysters (Crassostrea gigas) were sampled seasonally during 2004-2005, from different coastal environments of Morocco in order to measure their accumulated heavy metal concentrations. The concentrations of Hg and Pb were determined by AFS and ICP-MS methods, respectively, whilst the remaining metals (Cd, Cr, Cu, Mn, Zn and Ni) were quantified by AAS. The soft tissue concentrations of the mussels were on average 7.2 mg kg(-1) (Cd), 9.6 mg kg(-1) (Pb), 0.6 mg kg(-1) (Hg), 26.8 mg kg(-1) (Cu), 8.8 mg kg(-1) (Cr), 292 mg kg(-1) (Zn), 20.8 mg kg(-1) (Mn) and 32.8 mg kg(-1) (Ni). The highest tissue heavy metal concentrations were recorded in the south from the industrial area of Jorf Lasfar. The relationships between metal concentration and season in each species showed very similar annual profiles with a peak observed around spring-summer. Statistical analysis indicated that different species showed different bioaccumulation of metals depending on study site and season.     

Residual metal concentrations in soils and leaf accumulations in tobacco a decade following farmland application of municipal sludge

The objectives of this investigation were to examine the long-term residual effects of metal loading through sewage sludge applications on the total vs. diethylene triamine pentacetic acid (DTPA) extractable metal concentrations in soil and leaf accumulations in tobacco. Maryland tobacco (Nicotiana tabacum L.), cv. 'MD 609', was grown in 1983 and 1984 at two sites in Maryland that had been amended in 1972 with dewatered, digested sewage sludge from washington, DC, at rates equal to 0, 56, 112 and 224 mg ha(-1). The metal concentrations in the sludge, in mg kg(-1) dry weight, were: 1300 Zn, 570 Cu, 280 Pb, 45 Ni and 13 Cd. Soil samples collected from the surface horizon and composite leaf samples of cured tobacco were analyzed for total Zn, Cu, Mn, Fe, Pb, Ni and Cd concentrations. The soil samples were also examined for soil pH and DTPA extractable metals. Equations were generated using polynomic and stepwise regression analyses which described the relationships between total vs. DTPA extractable soil metals, and between DTPA soil and soil pH vs. plant metal concentrations, respectively. Significant increases were observed for both total and DTPA extractable metal concentrations for all metals, with all but total Mn and Ni being significant for linear and quadratic effects regarding sludge rates. However, linear relationships were found between DTPA extractable vs. total soil concentrations for all elements except Pb and Ni which were quadratic. Significant increases in plant Zn, Cu, Mn, Ni and Cd and decreases in Fe were observed with increased sludge rates. Plant Pb levels were unaffected by sludge applied Pb. Linear relationships were observed between plant Zn and Cd and DTPA soil metal levels: however, Mn and Cu levels were described by quadratic and cubic relationship, respectively. Relationships between plant Fe and Pb and DTPA extractable concentrations were nonsignificant. Additional safeguards to protect crop contamination from heavy metals such as Cd were discussed.     

Use of zebra mussel (Dreissena polymorpha) to assess trace metal contamination in the largest Italian subalpine lakes.

Trace metal (Cd, Co, Cr, Cu, Hg, Ni, Pb and Zn) contamination was evaluated in zebra mussels from the lakes Maggiore, Lugano, Como, Iseo and Garda, which are located in the most highly populated and industrialised area in Italy. Zebra mussels from Lake Maggiore contained the highest concentrations (3.44, 1.51, 4.97, 0.158, 5.87, 346 microg g(-1) for Cd, Co, Cr, Hg, Pb, Zn, respectively) of all metals analysed except Cu and Ni. The lowest levels of most metals were in animals from Garda and Lugano (0.78 and 0.60 microg g(-1) for Cd, 2.87 and 2.03 microg g(-1) for Cr, 0.065 and 0.049 microg g(-1) for Hg, 12.1 and 11.9 microg g(-1) for Ni, 1.96 and 2.46 microg g(-1) for Pb, 158 and 163 microg g(-1) for Zn). The most contaminated sites and possible local sources of metals were identified for each lake, and the lakes classified into quality classes concerning metal pollution.     

Comparison of the heavy metal bioaccumulation capacity of an epiphytic moss and an epiphytic lichen

This study compared the heavy metal bioaccumulation capacity in the epiphytic moss Scorpiurum circinatum and the epiphytic lichen Pseudevernia furfuracea, exposed in bags for 3 months in the urban area of Acerra (S Italy). The content of Al, As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Ti, V, and Zn was measured by ICP-MS. The results showed that both species accumulated all the heavy metals assayed. The moss had the highest bioaccumulation capacity for all metals and showed a more constant and linear accumulation trend than the lichen. Intra-tissue heavy metal bioaccumulation was assessed by X-ray microanalysis applied to ESEM operated in high and low vacuum and ESEM modes.     

Metal contents of fish from cultureponds near scrap metal reclamation facilities

Milkfish (Chanos chanos) from four fish-culture ponds adjacent to different metal recovery facilities along the Er-Jen River area, Tainan, Taiwan, were sampled to determine their metal contents. Chemical analysis showed that fish tissue contained different concentrations of Cu: 0.71-6.37 micrograms/g, Pb: ND (not detectable) approximately 41.04 micrograms/g, Cd: ND approximately 0.41 microgram/g, Al: 6.75-64.11 micrograms/g, Ni: 0.062-0.504 microgram/g and Zn: 16.11-41.86 micrograms/g. The average concentrations of Cu, Al, Zn, Cd and Pb in fish samples from some of the ponds were significantly higher than those from the reference pond. In addition, there were variations in metal concentrations of fish collected from different ponds. Pond D had the highest mean values of Cu, Cd and Zn, and Pond B of Al and Pb. Further investigations are needed to determine the source of metal contamination in the fish.     

Relationships between lake chemistry and calcium and trace metal concentrations of aquatic invertebrates eaten by breeding insectivorous waterfowl

Ca, P, Al, and trace metal (Cu, Ni, Zn, Cd, and Pb) concentrations were measured in several aquatic invertebrate taxa used as food by breeding insectivorous waterfowl, sampled from three sites in eastern Canada with widely varying water chemistry. Ca concentrations were highest in molluscs (snails and clams), averaging 200-300 mg g(-1) (shells included). Aquatic insects of varying sizes, life stages and habits (caddisfly larvae, dragonfly larvae, adult backswimmers, waterstriders, and whirligig beetles) had much lower mean Ca concentrations, ranging from about 0.6 mg g(-1) (beetles) to 1.8 mg g(-1) (caddisflies). Invertebrate-Ca concentrations decreased with increasing body mass for several taxa, with smaller and larger individuals providing similar absolute amounts of Ca. Ca concentrations in most aquatic insects (but not molluscs) were reduced under acidic, low Ca, high Al, low dissolved organic carbon (DOC) and/or low total phosphorus (TP) conditions. In stepwise multiple regressions, pH was consistently the main factor explaining variability in invertebrate-Ca, after controlling for the negative relationship between invertebrate-Ca and body mass for some taxa. Molluscs were absent from lakes below pH 5.3. In general, concentrations of P and metals in invertebrate taxa were not significantly correlated with lake pH. Levels of Al, Cd, or Pb were not sufficiently high to be considered toxic to potential consumers of these organisms. For waterfowl and other birds breeding in acid-stressed habitats and relying on aquatic invertebrates as a source of food, a reduced availability of dietary Ca is more likely than an increased exposure to toxic metals to negatively affect reproductive success, especially when other adverse effects of acidification (lower diversity of prey) are considered.     

Concentrations and composition of PCB congeners in the air around stored used capacitors containing PCB insulator oil in a suburb of Bangkok, Thailand

Accumulation of Zn, Cu, Pb and Cd was studied in snails fed for 120 days on diets contaminated with each metal separately and with all metals mixed together. The concentrations of Zn in food were in the range 39 to 12 200 mg kg(-1), Cu 9-1640 mg kg(-1), Pb 0.4-12 700 mg kg(-1), and Cd 0.16-146 mg kg(-1) on a dry weight basis. At the highest concentrations of all metals the consumption rates decreased significantly. For the remaining concentrations, Zn and Cu were accumulated in soft tissue in proportion to their concentrations in food. The lowest treatments of Pb and Cd did not cause any increase in soft tissue concentrations of these metals but at average treatments, a clear increase was observed. Copper was accumulated especially efficiently, exceeding concentrations in food throughout the whole range of treatments. Except for the lower end of experimental treatments, Zn was accumulated approximately in direct proportion to its concentration in the diet. Lead was the most efficiently regulated metal, with soft tissue concentrations always substantially lower than in food. Approximately 60% of Zn, 90% of Cu, 43% of Pb and 68% of Cd on average was assimilated from food. The assimilation efficiency of food alone was ca 74%. The concentrations of metals in shells increased significantly with exposure, but (with one exception) the concentrations in shells did not exceed 5% of those found in soft tissue. We argue that snails are more important as agents of food-chain transport of Cu and Cd, than of Zn or Pb. Our results indicate also that snails are not able to deposit significant quantities of metals in their shells, at least during the time scale of our laboratory experiment.     

The use of a sequential leaching procedure for heavy metal fractionation in green liquor dregs from a causticizing process at a pulp mill

A five-stage sequential leaching procedure was used to fractionate heavy metals (Cd, Cu, Pb, Cr, Zn, Fe, Mn, Ni, Co, As, V, Ba and Ti) in green liquor dregs into the following fractions: (1) water-soluble fraction (H2O), (2) exchangeable fraction (CH3COOH), (3) easily reduced fraction (HONH3Cl), (4) oxidizable fraction (H2O2 + CH3COONH4), and (5) residual fraction (HF + HNO3 + HCl). The green liquor dregs were derived from a causticizing process at a pulp mill at Kemi, Northern Finland. According to the leaching studies, the leachability of heavy metals in the water-soluble fraction varied between 0.5 and 2 mg kg(-1) expressed on a dry weight (d.w.) basis, indicating relatively low bioavailability of the metals. However, the concentration of Mn (2065 mg kg(-1); d.w.) showed a strong and of Zn (17.6 mg kg(-1); d.w.), Ni (39.7 mg kg(-1); d.w.) and Ba (32.0 mg kg(-1); d.w.) slightly tendency to be extracted in the exchangeable fraction. In addition, Zn, Mn, Ni, Co, V and Ba showed clear leachability in the easily reduced fraction, as well as Cd, Cu, Cr, Zn, Mn, As and Ba in the oxidizable fraction. For Cd, Cu, Cr, Zn, Mn, Ni, Co, Ba and Ti, the sum of leachable heavy metal concentrations in fractions 1-5 agreed relatively well with the "total" heavy metal concentrations. Recoveries of the sum of fractions 1-5 were 84-56% of those obtained by the US EPA method 3052 (i.e. concentrations obtained after microwave oven digestion with a mixture of HF and HNO3).     

Distribution and accumulation of heavy metals in the sediments of Kaohsiung Harbor, Taiwan

The distribution, enrichment, and accumulation of heavy metals in the sediments, especially those at the vicinity of tributary estuaries of Kaohsiung Harbor, Taiwan were investigated. Sediment samples from six locations in the Kaohsiung Harbor were collected quarterly in the period from 2002 to 2005 and characterized for metal content (e.g., Hg, Pb, Cd, Cr, Cu, Zn and Al), water content, organic matter, total nitrogen, total phosphorous, total grease, and grain size. Results showed that metal concentrations varied from 0.58 mg kg(-1) for Cd to 596 mg kg(-1) for Zn. Metal concentrations at the vicinity of river mouths were higher than those at other locations. All heavy metals studied, except Cr, had relatively high enrichment factors and geo-accumulation indices in the estuaries. Moreover, metal concentrations correlated closely to the physical-chemical properties of the sediments, which strongly suggested the influence of industrial and municipal wastewaters discharged from the neighboring industrial parks and river basins. Results would help develop strategies for pollution control and sediment remediation of Kaohsiung Harbor.     

Distribution and coassociations of selected metals in seals of the Antarctic

Zinc, Cu, Cd, Pb, Ag, Ni, Co, Cr, Fe and Mn concentrations in some tissues of crabeater seal (Lobodon carcinophagus), leopard seal (Hydrurga leptonyx) and Weddell seal (Leptonychotes weddelli) from the Antarctic were determined. Distinct inter-tissue differences in metal concentrations in seals were observed; liver contained maximum levels of Zn, Cu, Ag and Mn, whilst kidney showed the highest levels of Cd, Ni and Co. Muscle was characterized by low concentrations of all the elements analyzed. The metal concentrations in the vertebrates analyzed were compared with those for organisms originating from various aquatic areas. Significant correlations were found between the levels of several of the metals analyzed, e.g. between renal and hepatic concentrations of Zn and Cd. Strong relationships between the hepatic concentrations of some metals were found, e.g. Cd-Zn. These two metals also showed a significant coassociation in their renal concentrations. The slope of the regression line for renal Cd/Zn was about three times higher than the hepatic one and this may reflect a relatively high Cd exposure, probably from specific food (squid and krill) provenance, of the seals analyzed.     

An ozone flux-response relationship for wheat

The concentrations of heavy metals in the fine fraction (<63 microm) of 19 surficial sediment samples from the border region of Baja California (Mexico) and California (USA) were determined. The concentration ranges (in microg g(-1)) of the metals were: Cu, 4.9-23; Zn, 39-188; Ni, 16-44; Cr, 56-802; Pb, 6-21; Cd, 0.08-0.64; Ag, 0.01-0.28; and Mn, 392-1506; the intervals (percentage) for Fe and Al were 1.36-4.6 and 3.61-8.55, respectively. The heavy metals in these sediments indicate a relative enrichment of Cr (>3000%), Zn (>350%), Ni (>300%) and Cu (>150%) off the wastewater outfall at Punta Bandera in Tijuana, Baja California, with respect to non-polluted sediments of the region. Pb, Cd and Ag have low concentrations off the same outfall and enrichment factors are generally lower than 300% (Pb) and lower than 150% (Cd and Ag). This suggests that these metals have a different origin, or that they are controlled by a different geochemical mechanism than the former. The concentrations of Mn, Fe and Al occurred within ranges typical for coastal areas and probably reflect the mineralogical composition of the sediments of the region.     

Evaluation of diffusive gradients in thin film (DGT) samplers for measuring contaminants in the Antarctic marine environment

This work has been the first application of DGT samplers for measuring metals in water and sediment porewater in the Antarctic environment, and whilst DGT water sampling was restricted to quantification of Cd, Fe and Ni, preconcentration using Empore chelating disks provided results for an additional nine elements (Sn, Pb, Al, Cr, Mn, Co, Cu, Zn, As). Although higher concentrations were measured for some metals (Cd, Ni, Pb) using the Empore technique, most likely due to particulate-bound or colloidal species becoming entrapped in the Empore chelating disks, heavy metal concentrations in the impacted Brown Bay were found to be comparable with the non-impacted O'Brien Bay. Sediment porewater sampling using DGT also indicated little difference between Brown Bay and O'Brien Bay for many metals (Cd, Al, Cr, Co, Ni, Cu), however, greater amounts of Pb, Mn, Fe and As were accumulated in DGT probes deployed in Brown Bay compared with O'Brien Bay, and a higher accumulation of Sn was observed in Brown Bay inner than any of the other three sites sampled. Comparison of DGT derived porewater concentrations with actual porewater concentrations showed limited resupply of Cd, Pb, Al, Cr, Mn, Co, Ni, Cu, Zn and As from the solid phase to porewater, with these metals appearing to be strongly bound to the sediment, however, resupply of Fe and Sn was apparent. Based upon our observations here, we suggest that Sn, and to a lesser extent Pb, are critical contaminants.     

Influence of solution acidity and CaCl2 concentration on the removal of heavy metals from metal-contaminated rice soils

Soil washing is considered a useful technique for remediating metal-contaminated soils. This study examined the release edges of Cd, Zn, Ni, Cr, Cu or Pb in two contaminated rice soils from central Taiwan. The concentrations exceeding the trigger levels established by the regulatory agency of Taiwan were Cu, Zn, Ni and Cr for the Ho-Mei soil and Pb for the Nan-Tou soil. Successive extractions with HCl ranging from 0 to 0.2 M showed increased release of the heavy metals with declining pH, and the threshold pH value below which a sharp increase in the releases of the heavy metals was highest for Cd, Zn, and Ni (pH 4.6 to 4.9), intermediate for Pb and Cu (3.1 to 3.8) and lowest for Fe (2.1), Al (2.2) and Cr (1.7) for the soils. The low response slope of Ni and Cr particularly for the rice soils make soil washing with the acid up to the highest concentration used ineffective to reduce their concentrations to below trigger levels. Although soil washing with 0.1 M HCl was moderately effective in reducing Cu, Pb, Zn and Cd, which brought pH of the soils to 1.1+/-0.1 (S.D.), the concurrent release of large quantities of Fe and Al make this remediation technique undesirable for the rice soils containing high clay. Successive washings with 0.01 M HCl could be considered an alternative as the dissolution of Fe and Al was minimal, and between 46 to 64% of Cd, Zn, and Cu for the Ho-Mei soil and 45% of Pb in the Na-Tou soil were extracted after four successive extractions with this dilute acid solution. The efficacy of Cd extraction improved if CaCl2 was added to the acid solution. The correlation analysis revealed that Cr extracted was highly correlated (P < 0.001) with Fe extracted, whereas the Cu, Ni, Zn, Cd or Pb extracted was better correlated (P < 0.001) with Al than with Fe extracted. It is possible that the past seasonal soil flooding and drainage in the soils for rice production was conducive to incorporating Cr within the structure of Fe oxide, thereby making them extremely insoluble even in 0.2 M HCl solution. The formation of solid solution of Ni with Al oxide was also possible, making it far less extractable than Cd, Zn, Cu, or Pb with the acid concentrations used.     

Characterization and spatial distribution of heavy metals in sediment from Cedar and Ortega rivers subbasin

The Cedar and Ortega rivers subbasin is a complex environment where both natural and anthropogenic processes influence the characteristics and distributions of sediments and contaminants, which in turn is of importance for maintenance, dredging and pollution control. This study investigated the characteristics and spatial distribution of heavy metals, including lead (Pb), copper (Cu), zinc (Zn) and cadmium (Cd), from sediments in the subbasin using field measurements and three-dimensional kriging estimates. Sediment samples collected from three sampling depth intervals (i.e., 0-0.10, 0.11-0.56 and 0.57-1.88 m) in 58 locations showed that concentrations of Pb ranged from 4.47 to 420.00 mg/kg dry weight, Cu from 2.30 to 107.00 mg/kg dry weight, Zn from 9.75 to 2,050.00 mg/kg dry weight and Cd from 0.07 to 3.83 mg/kg dry weight. Kriging estimates showed that Pb, Cu and Cd concentrations decreased significantly from the sediment depth of 0.10 to 1.5 m, whereas Zn concentrations were still enriched at 1.5 m. It further revealed that the Cedar River area was a potential source area since it was more contaminated than the rest of the subbasin. Comparison of aluminum (Al)-normalized metal concentrations indicated that most of the metals within the top two intervals (0-0.56 m) had concentrations exceeding the background levels by factors of 2-10. A three-dimensional view of the metal contamination plumes showed that all of the heavy metals, with concentrations exceeding the threshold effect level (TEL) that could pose a threat to the health of aquatic organisms, were primarily located above the sediment depth of 1.5 m.     

Metal contamination and solid phase partitioning of metals in urban roadside sediments

This study was undertaken to assess the anthropogenic impact on metal concentrations of urban roadside sediments (N = 633) in Seoul city, Korea and to estimate the potential mobility of selected metals (Zn, Cu, Pb, Cr, Ni, and Cd) using sequential extraction. Comparison of metal concentrations in roadside sediments with mean background values in sediments collected from first- or second-order streams in Korea shows that Zn, Cu and Pb are most affected by anthropogenic inputs. The 206Pb/207Pb ratios of roadside sediments (range = 1.1419-1.1681; mean 1.1576 +/- 0.0068) suggest that Pb is mainly derived from industrial sources rather than from leaded gasoline. A five-step sequential extraction of roadside sediments showed that Zn, Cd and to a lesser degree Ni occur predominantly in the carbonate bound fraction, while Pb is highest in the reducible fraction, Cu in the organic fraction, and Cr in the residual fraction. It was found that the concentrations in the readily available exchangeable fraction were generally low for most metals examined, except for Ni whose exchangeable fraction was appreciable (average 15.2%). Considering the proportion of metals bound to the exchangeable and carbonate fractions, the comparative mobility of metals probably decreases in the order of Zn > Ni > Cd > Pb > Cu > Cr. As potential changes of redox state and pH may remobilize the metals bound to carbonates, reducible, and/or organic matter, and may release and flush them through drain networks into streams, careful monitoring of environmental conditions appears to be very important. With respect to ecotoxicity, it is apparent the Zn and Cu pollution is of particular concern in Seoul city.     

Concentrations of cadmium and other metals in Fucus vesiculosus L. and Fontinalis dalecarlica Br. Eur. from the northern Baltic Sea and the southern Bothnian Sea

Concentrations of Cd and ten other metals (Al, Co, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn) were determined in the brown seaweed Fucus vesiculosus L. and the aquatic moss, Fontinalis dalecarlica Br. Eur. from the northern Baltic Sea and the southern Bothnian Sea. Elevated concentrations of metals were found in samples taken close to densely populated areas, such as Stockholm and Nyn?shamn. Very high concentrations of especially Zn were found in both Fucus and Fontinalis samples taken from the area south of the Gulf of G?vle. The results indicate that mining and industrial activities along the river Dal?lven are the main sources of Zn and several other metals. Cd concentrations in Fucus plants reached maximum values (24.5 mg kg(-1)) at the northern site. The gradual increase of Cd concentrations in Fucus plants northward could not be totally explained by the salinity gradient in the Baltic Sea; reasons for this are discussed in this paper.     

Involvement of siderophores in the reduction of metal-induced inhibition of auxin synthesis in Streptomyces spp

Unlike synthetic metal chelators, microbe-assisted phytoremediation provides plants with natural metal-solubilizing chelators which do not constitute a potential source of environmental pollution. Concurrently with microbial chelators, plant growth promotion can be enhanced through bacterially-produced phytohormones. In this work, the simultaneous production of siderophores and auxins by Streptomyces was studied to gain insight for future application in plant growth and phytoremediation in a metal-contaminated soil. Standard auxin and siderophore detection assays indicated that all of the investigated Streptomyces strains can produce these metabolites simultaneously. However, Al(3+), Cd(2+), Cu(2+), Fe(3+) and Ni(2+), or a combination of Fe(3+) and Cd(2+), and Fe(3+) and Ni(2+) affected auxin production negatively, as revealed by spectrophotometry and gas chromatography-mass spectrometry. This effect was more dramatic in a siderophore-deficient mutant. In contrast, except for Fe, all the metals stimulated siderophore production. Mass spectrometry showed that siderophore and auxin-containing supernatants from a representative Streptomyces species contain three different hydroxamate siderophores, revealing the individual binding responses of these siderophores to Cd(2+) and Ni(2+), and thus, showing their auxin-stimulating effects. We conclude that siderophores promote auxin synthesis in the presence of Al(3+), Cd(2+), Cu(2+) and Ni(2+) by chelating these metals. Chelation makes the metals less able to inhibit the synthesis of auxins, and potentially increases the plant growth-promoting effects of auxins, which in turn enhances the phytoremediation potential of plants.