Is pesticide sorption by constructed wetland sediments governed by water level and water dynamics?

Constructed wetlands (CWs) are used to reduce the pesticide inputs from tile drainage or run-off to surface water. Their effectiveness appears variable and remains to be better characterized and understood. The aim of this study was to assess the influences of two hydraulic parameters (i.e., dynamics and water level) on the sorption process occurring in CWs. Then, two solid/liquid ratios were studied (1/1 and 1/5) to mimic the water level variation in the field, and two agitation speeds were used (none and gentle agitation) to simulate different water dynamics (stagnation and flow pass, respectively). Sorption kinetics and isotherms were obtained for four pesticides with contrasting properties. The pesticide adsorption coefficients were classified as follows: boscalid (BSC) > cyproconazole (CYP) > isoproturon (IPU) ～ dimethachlor (DMT) at any ratio or agitation, in agreement with their water solubilities and K _ow values. The effect of the solid/liquid ratio was evidenced for all conditions. Indeed, the adsorption equilibrium time was reached more quickly for the 1/1 ratio (24–72 h) than for the 1/5 ratio (96–120 h). In addition, the adsorption coefficients (K _f ^ads) were larger for the 1/1 ratio (1.8–11.2 L kg^?1) than for the 1/5 ratio (1.0–5.9 L kg^?1). The agitation effect was ?more evidenced for the 1/5 ratio and for the more hydrophobic molecules, such as BSC and CYP, for which adsorption equilibrium time was never reached with agitation (>120 h), while it was reached at 96 h without agitation. Moreover, the K _f ^ads values were larger with agitation than without agitation for BSC and CYP, whereas they were similar for the two agitations for IPU and DMT. Our results demonstrated that the hydrodynamic function of CWs could influence pesticide sorption with variable effects according to the molecular properties and consequently influence the mitigation effect of CWs throughout the year.     

Estimation of β-cyfluthrin and imidacloprid in okra fruits and soil by chromatography techniques

Dissipation of β-cyfluthrin and imidacloprid in okra was studied following three applications of a combination formulation of Solomon 300 OD (β-cyfluthrin 9 % + imidacloprid 21 %) @ 60 and 120 g a.i. ha^?1 at 7 days interval. Residues of β-cyfluthrin and imidacloprid in okra were estimated by gas liquid chromatography (GLC) and high performance liquid chromatography (HPLC), respectively. Residues of β-cyfluthrin were confirmed by gas chromatograph–mass spectrometry (GC-MS) and that of imidacloprid by high performance thin layer chromatography (HPTLC). Half-life periods for β-cyfluthrin were found to be 0.91 and 0.68 days whereas for imidacloprid these values were observed to be 0.85 and 0.96 days at single and double the application rates, respectively. Residues of β-cyfluthrin dissipated below its limit of quantification (LOQ) of 0.01 mg kg^?1 after 3 and 5 days at single and double the application dosage, respectively. Similarly, residues of imidacloprid took 5 and 7 days to reach LOQ of 0.01 mg kg^?1, at single and double dosages respectively. Soil samples collected after 15 days of the last application did not show the presence of β-cyfluthrin and imidacloprid at their detection limit of 0.01 mg kg^?1.     

Estimation of β-cyfluthrin and imidacloprid in okra fruits and soil by chromatography techniques

Dissipation of β-cyfluthrin and imidacloprid in okra was studied following three applications of a combination formulation of Solomon 300 OD (β-cyfluthrin 9 % + imidacloprid 21 %) @ 60 and 120 g a.i. ha(-1) at 7 days interval. Residues of β-cyfluthrin and imidacloprid in okra were estimated by gas liquid chromatography (GLC) and high performance liquid chromatography (HPLC), respectively. Residues of β-cyfluthrin were confirmed by gas chromatograph-mass spectrometry (GC-MS) and that of imidacloprid by high performance thin layer chromatography (HPTLC). Half-life periods for β-cyfluthrin were found to be 0.91 and 0.68 days whereas for imidacloprid these values were observed to be 0.85 and 0.96 days at single and double the application rates, respectively. Residues of β-cyfluthrin dissipated below its limit of quantification (LOQ) of 0.01 mg kg(-1) after 3 and 5 days at single and double the application dosage, respectively. Similarly, residues of imidacloprid took 5 and 7 days to reach LOQ of 0.01 mg kg(-1), at single and double dosages respectively. Soil samples collected after 15 days of the last application did not show the presence of β-cyfluthrin and imidacloprid at their detection limit of 0.01 mg kg(-1).     

Coastal resources and management systems influenced by conflict and migration: Mecúfi,Mozambique

Coastal resource utilization and management systems, both traditional and more recently conceived, were studied in Mecúfi district, northern Mozambique in a post-conflict situation prior to which a significant migration of people to the coast had occurred. A wide variety of coastal biotopes containing a multitude of resources had been affected in various ways. Intertidal organisms exhibited signs of decreasing abundance and average size, whereas offshore fishes and mangrove forests did not show signs of over-utilization. It was observed that traditional coastal management systems were still influential, but that newer initiatives were only beginning to enter into significant dialogue and cooperation with these. In the current circumstances of peace and political stability, the principal threat to coastal management and the interests of local people in Mecúfi is considered to be potential loss of common property resources and land tenure in the face of prospects of privatization, but Mozambican authorities are presently addressing these issues with legal reforms.     

Kaempferol prevents cadmium chloride-induced liver damage by upregulating Nrf2 and suppressing NF-κB and keap1

Environmental Science and Pollution Research - This study evaluated the protective effect of kaempferol, a natural flavonoid, against cadmium chloride (CdCl2)-induced liver damage and examined the...     

Sorption and desorption of lindane by wood charcoal in fixed‐bed reactor

Abstract

Sorption and desorption of lindane (y‐HCH) by wood charcoal (WC) and wood charcoal treated by 1N HNO₃ (WCT) in fixed‐bed reactor (FBR) were investigated in this study. WCT revealed a better performance than WC, in removing lindane in FBR. The breakthrough of lindane was significantly affected by the size of WCT, flow rate to the FBR, and depth of WCT bed. The removal of lindane in the presence of mixture of other pesticides was considerably reduced. The design parameters for FBR were calculated based on the bed‐depth service time (BDST) approach. Many parameters Viz. depth of sorption zone, velocity of sorption, sorbent use rate, critical bed‐depth, bed efficiency, and service time, were determined for design of the fixed‐bed. Using the material balance principle, the characteristics of the wave‐front were evaluated and found that the wave‐front velocity is approximately equal to the sorption velocity determined from the BDST approach. Desorption studies were performed in dilute organic solvent media and they gave an excellent performance in regeneration process.     

Co-digestion of kitchen waste and fruit–vegetable waste by two-phase anaerobic digestion

The high salinity and fat contents of kitchen waste (KW) inhibits the effect of two-phase anaerobic digestion system. This research introduces fruit–vegetable waste (FVW) to alleviate the inhibition effect caused by salinity and fat concentrations, and tries to achieve an optimal addition ratio of FVW, an optimal hydraulic remain time (HRT) of acidogenic-phase reactor and methanogenic-phase reactor. A two-phase anaerobic digestion (AD) system was developed to co-dispose KW and FVW. Four sets of experiments were run with different mass proportions between KW and FVW (25–75, 50–50, 75–25, and 100–0 %?m/m). Considering the biodegradation rate and the acidification degree, the system with 25 % KW had the best performance during the acidogenic phase. When the system was run with 50 % KW, it not only had the best stability performance but also had a bigger capacity to treat KW than the system with 25 % KW. The system with 50 % KW was the best ratio in this two-phase AD system. Co-digestion of KW and FVW by two-phase AD is feasible. The addition of FVW can reduce the inhibition effect caused by salinity and fat concentrations, reduce the HRT, and lead to a higher degree of acidification.     

HNO3 analyzer by scrubber difference and the NO–ozone chemiluminescence method

A fast response analyzer for HNO₃ in highly polluted air is described. The time resolution attainable was 12 s. The method is based on the difference in a technique for HNO₃-scrubbed and non-scrubbed air and the reduction of HNO₃ to NO with the use of a line of catalytic converters and a method for the subsequent NO-ozone chemiluminescence. A sample air stream, in which particulates are removed with a Teflon filter, is divided into two channels. CH-1 is directly connected to the converter line, and CH-2 contains a HNO₃ scrubber packed with a nylon fiber that goes to another converter line. Each converter line is composed of a hot quartz-bead converter (QBC) and a molybdenum converter (MC) in a series. A QBC reduces HNO₃ to (NO+NO₂), which is called NO_x. The MC reduces the NO_x to NO.For CH-1, the analyzer detects most compounds that typically comprise NO_y (J. Geophys. Res. 91 (1986) 9781). These CH-1 compounds are called NO_y′ hereafter (NO_y-particulate nitrate) because the particulates are removed by the filter. A difference in the detector signal for the two channels indicates HNO₃. For a blank test, atmospheric air in which HNO₃ was pre-scrubbed by an extra nylon fiber was introduced to the analyzer. Variations in the blank value were 0.38±0.42 and 0.34±0.55 ppb during the high readings (NO_y′-HNO₃ ) (called NO_y^* hereafter) (111±12 ppb, N=180), and low NO_y^* readings (62±8 ppb, N=180), respectively, indicating that the lowest detection limit of the analyzer is 1.1 ppb (2σ). When the data obtained with the analyzer is compared to the data using the denuder method, a linear correlation with the regression of Y=0.973X+0.077 (r²=0.916 (N=20)) in the range of 0–6.5 ppb HNO₃ is obtained, which is an excellent agreement. Atmospheric monitoring was carried out at Kobe. Although the average concentration of HNO₃ was 2.6±1.3 ppb, ca.10 ppb for a HNO₃ concentration was occasionally observed when the NO_y^* concentration was high, i.e., more than 100 ppb.     

Determination of phenols and pharmaceuticals in municipal wastewaters from Polish treatment plants by ultrasound-assisted emulsification–microextraction followed by GC–MS

A method combining ultrasound-assisted emulsification–microextraction (USAEME) with gas chromatography–mass spectrometry (GC–MS) was developed for simultaneous determination of four acidic pharmaceuticals, ibuprofen, naproxen, ketoprofen, and diclofenac, as well as four phenols, 4-octylphenol, 4-n-nonylphenol, bisphenol A, and triclosan in municipal wastewaters. Conditions of extraction and simultaneous derivatization were optimized with respect to such aspects as type and volume of extraction solvent, volume of derivatization reagent, kind and amount of buffering salt, location of the test tube in the ultrasonic bath, and extraction time. The average correlation coefficient of the calibration curves was 0.9946. The LOD/(LOQ) values in influent and effluent wastewater were in the range of 0.002–0.121/(0.005–0.403) μg L^?1 and 0.002–0.828/(0.006–2.758) μg L^?1, respectively. Quantitative recoveries (≥94 %) and satisfactory precision (average RSD 8.2 %) were obtained. The optimized USAEME/GC–MS method was applied for determination of the considered pharmaceuticals and phenols in influents and treated effluents from nine Polish municipal wastewater treatment plants. The average concentration of acidic pharmaceuticals in influent and effluent wastewater were in the range of 0.06–551.96 μg L^?1 and 0.01–22.61 μg L^?1, respectively, while for phenols were in the range of 0.03–102.54 μg L^?1 and 0.02–10.84 μg L^?1, respectively. The removal efficiencies of the target compounds during purification process were between 84 and 99 %.     

Biosorption of Basic Violet 5BN and Basic Green by waste brewery’s yeast from single and multicomponent systems

Background and aim  

The biosorption of Basic Violet 5BN (BV) and Basic Green (BG) by waste brewery’s yeast (WBY) from single and binary systems was investigated.     

Microbial degradation op tripluralin by aspergillus carneus,fusarium oxysporum and trichoderma viride ∗

Abstract

³H‐Trifluralin was synthesized by condensation of ³H‐4‐chloro‐3,5‐dinitro‐α, α, α‐trifluorotoluene with di‐n‐propylamine.

After incubation of trifluralin with Aspergillus carneus, Fusarium oxysporum and Trichoderma viride for 10 days, a small percentage (less than 10%) of unchanged herbicide was recovered in the extractable fraction. This indicates a fairly rapid degradation of the herbicide by the fungal species. Other than trifluralin, the culture medium contained at least five labelled products: 2, 6‐dinitro‐N‐n‐propyl‐α, α, α‐tri‐fluoro‐p‐toluidine; 2, 6‐dinitro‐α, α, α‐trifluoro‐p‐toluidine; 2‐amino‐6‐nitro‐α, α,‐trifluoro‐p‐toluidine, 2, 6‐dinitro‐4‐trifluoromethyl phenol and a major polar product which constituted more than 50% of the total extractable transformation products. A pathway, which similates that of aerobic degradation of the herbicide in soil, is suggested for the microbiological degradation of trifluralin.     

LncRNA NEAT1 contributes to the acquisition of a tumor like-phenotype induced by PM 2.5 in lung bronchial epithelial cells via HIF-1α activation

Environmental Science and Pollution Research - The hazards of particulate matter (PM2.5) on human respiratory health have been previously reported. However, the molecular mechanisms underlying...     

Air–land exchanges of CO2, CH4 and N2O measured by FTIR spectrometry and micrometeorological techniques

Micrometeorological flux-gradient and nocturnal boundary layer methods were combined with Fourier transform infrared (FTIR) spectroscopy for high-precision trace gas analysis to measure fluxes of the trace gases CO₂, CH₄ and N₂O between agricultural fields and the atmosphere. The FTIR measurements were fully automated and routinely obtained a precision of 0.1–0.2% for several weeks during a measurement campaign in October 1995. In flux-gradient measurements, vertical profiles of the trace gases were measured every 30 min from the ground to 22 m. When combined with independent micrometeorological measurements of water vapour fluxes, trace gas fluxes from the underlying surface could be determined. In the nocturnal boundary layer method the rate of change in mass storage in the 0–22 m layer was combined with fluxes measured at 22 m to estimate surface fluxes. Daytime fluxes for CO₂ were −0.78±0.40 (1σ) mg CO₂ m⁻² s⁻¹. Daytime fluxes of N₂O and CH₄ were very small and difficult to measure reliably using the flux-gradient technique, despite the high precision of the concentration measurements. Mean daytime flux for N₂O was 17±48 ng N m⁻² s⁻¹, while the corresponding flux for CH₄ was 47±410 ng CH₄ m⁻² s⁻¹. The mean nighttime flux of CO₂ estimated using the nocturnal boundary layer method was +0.15±0.05 mg CO₂ m⁻² s⁻¹, in good agreement with chamber measurements of respiration rates. Nighttime fluxes of CH₄ and N₂O from the nocturnal boundary layer method were 109±69 ng CH₄ m⁻² s⁻¹ and 2±3.2 ng N m⁻² s⁻¹, respectively, in good agreement with chamber measurements and inventory estimates based on the sheep and cattle stocking rates in the region. The suitability of FTIR-based methods for long term monitoring of spatially and temporally averaged flux measurements is discussed.     

Solar light–driven photocatalytic degradation and mineralization of beta blockers propranolol and atenolol by carbon dot/TiO2 composite

Herein improved solar light–driven photocatalytic degradation and mineralization of two emerging pollutants as well as recalcitrant beta blockers propranolol (PR) and atenolol (AT) have been demonstrated by metal-free carbon dot/TiO₂ (CDT) composite. Hydrothermally synthesized TiO₂ has been decorated with electrochemically synthesized carbon dots (CDs) and was well characterized by various analytical techniques viz. XRD, FTIR, Raman, XPS, UV–visible DRS, FESEM, and TEM. The optimized CDT composite, 2CDT (2 mL carbon dot/TiO₂), showed?~?3.45- and?~?1.75-fold enhancement in the photodegradation rate as compared to pristine TiO₂ for PR and AT respectively in 1 hour of irradiation along with complete degradation of PR and AT after 3 hours of irradiation. 2CDT exhibited 76% and 80% mineralization of PR and AT in contrast with 62% and 47% observed by pristine TiO₂. Further, the major reaction intermediates formed after degradation have been identified by HPLC/MS analysis, confirming more than 99% reduction of the parent compound for both PR and AT. Reusability of the optimized catalyst also showed successful degradation up to 3 cycles, showing reduction abilities of 97%, 95%, and 94% for 1st, 2nd, and 3rd cycle respectively. The enhanced degradation and mineralization efficiency of the 2CDT composite could be attributed to the excellent photosensitizer and electron reservoir properties of the CD along with upconverted photoluminescence behavior. The present study unlocks the possibility of using metal-free, facile CDT composite for effective degradation and mineralization of widely used beta blockers and other pharmaceuticals.

     

Evaluating China’s regional energy and environmental efficiency by considering three internal parallel industries

With the rapid development of China’s economy, high energy consumption and high pollution emission have become serious problems. To solve these problems, many studies have been done to evaluate energy and environmental efficiency, as the results can provide valuable information to improve performance. However, the previous research mainly evaluates China’s regional energy and environmental efficiency by considering each region’s industry as a whole system, ignoring the internal structure. In reality, each region mainly includes three parallel types of industry: primary, secondary, and tertiary. Therefore, this paper provides a parallel data envelopment analysis (DEA) approach to evaluate China’s regional energy and environment efficiency by considering these parallel industrial systems. The following findings can be obtained based on the empirical results: (1) the overall energy efficiency of China is low, and the inefficiency of the economic system is mainly sourced from the lower energy and environmental performance of the primary industry and the tertiary industry. (2) the introduction of the environmental variable (CO₂) leads to the increase of some backward areas’ efficiencies. (3) the energy efficiency of each provincial region is different, and most of them have their own inefficient industries. (4) the total factor productivity of China is declining, mainly because of the decline of technical efficiency.

     

Effects of biodegradation and sorption by humic acid on the estrogenicity of 17β-estradiol

The removal of 17β-estradiol (E2) by biodegradation and sorption onto humic acid (HA) was examined at various HA concentrations. Subsequently, estrogenicity associated with E2 removal was estimated using E-screen bioassay. Results showed that E2 biodegradation and its subsequent transformation to estrone (E1) were significantly reduced with increasing HA concentration. In addition, the presence of nutrients enhanced the biodegradation of E2. Overall, E2 biodegradation was the dominating contributor to its removal, which demonstrated a significantly negative correlation with E2 sorption at various HA concentrations. The sorption of E2 by HA was significantly enhanced with increasing HA concentration. Estrogenicity associated with residual E2 showed that there existed a significant difference among various HA concentrations, with the lowest value in the absence of HA. The findings suggest that the presence of HA and nutrients in natural waters should be considered in assessing estrogenicity of environmental samples due to complex sorption and biodegradation processes.     

Removal and biosorption of C₆₀ from water by an aquatic plant, Ceratophyllum sp

The fate of fullerene water suspension (FWS) in an aquatic system of Ceratophyllum sp., a rootless submerged plant, under non-sterile sediment-free conditions was investigated. Fast removal of FWS from water by the plants was observed and irreversible adsorption of C₆₀ onto plants and increasing C₆₀ mass on the plant surface with prolonged exposure durations were confirmed. An intact plant extraction procedure was developed and the majority (>80%) of C₆₀ removed from water was extracted from the plants. C₆₀ remained aggregated after being associated with the plants, which was verified by ¹³C NMR spectroscopy. Light micrographs showed association of FWS on and in the cuticle layers.