亚麻对染料甲基紫吸附的响应面法分析

以改性亚麻为吸附剂,含有染料甲基紫的溶液为模拟废水,考察吸附剂的吸附性能。利用响应面设计实验,分析改性温度、吸附时间、吸附剂用量对吸附剂吸附量和去除率之间的相互影响。结果表明:改性温度55℃、吸附时间120 min,吸附剂用量为0.1 g条件下吸附量和去除率分别为39.65 mg/g和99.26%。     

磁性凹凸棒土的制备及其对水中铅离子的吸附

利用化学共沉淀法制备了磁性凹土复合吸附剂(ATP/Fe_3O_4),通过静态吸附实验研究了该材料对水中Pb~(2+)的吸附性能。采用扫描电子显微镜(SEM)、X射线衍射仪(XRD)、红外光谱仪(FTIR)和振动样品磁强计(VSM)对复合吸附剂进行表征,并考察了吸附剂投加量、溶液初始pH值及吸附时间等因素对Pb~(2+)吸附效果的影响。结果表明,Fe_3O_4颗粒负载在凹土表面,复合吸附剂的比饱和磁化强度为29.22 emu/g,可有效实现固液分离的目标。Pb~(2+)吸附实验表明,ATP/Fe_3O_4对Pb~(2+)具有良好的吸附效果,当Pb~(2+)初始浓度为50mg/L、溶液pH为5.0、吸附剂用量为3.0 g/L时,去除率可达87.35%。ATP/Fe_3O_4对Pb~(2+)的吸附行为符合准二级动力学方程。     

有机改性对凹凸棒黏土吸附四环素类抗生素的影响

采用OECD guideline 106批量平衡吸附法研究四环素类抗生素在十六烷基三甲基溴化铵改性凹凸棒黏土(CTAB-ATP)上的吸附作用,并考察了溶液pH、吸附剂的投加量、离子强度对吸附过程的影响。结果表明,CTAB-ATP对四环素、土霉素、金霉素3种四环素类抗生素的吸附容量随着溶液pH的增加而增加;随着吸附剂投加量的增大而减小;随着离子强度的增加呈现缓慢减小的趋势。CTAB-ATP对四环素、土霉素、金霉素的吸附过程均符合准二级动力学模型(r0.998),吸附等温线较好地符合Langmuir等温式。有机改性凹凸棒黏土的疏水性增强,提高了对有机污染物的吸附能力,其沉降性能良好,这使其作为一种吸附剂用于实际抗生素废水的处理成为可能。     

改性沸石吸附水中有机物的试验研究

本试验采用溴化十六烷基三甲胺(HDTMA)制备改性沸石，研究了改性沸石吸附水中有机物的影响因素．结果表明，改性沸石对2，4-二氯苯酚(2，4-DCP)具有很好的吸附效果，绘制了改性沸石吸附2，4-DCP的吸附等温线。     

室内氨气污染的净化试验研究

近几年 ,由于建筑施工使用含氨的添加剂和使用室内装饰材料 ,造成现代建筑物室内氨气 (NH3)污染问题 ,严重影响了人们的工作和生活。本研究采用改性的吸附材料 ,在管道系统和封闭空间两种不同工况条件下 ,对以改性吸附剂做吸附材料的氨气净化装置进行净化性能的评价 ,为室内氨气污染的净化治理提供了新的思路。     

硝酸镧改性聚丙烯酸对水中氟离子的吸附试验探讨

以丙烯酸为原料,乙二醇二甲基丙烯酸酯为交联剂制得聚丙烯酸树脂(PAA),用于制备表面粗糙、介孔丰富的镧(Ⅲ)改性聚丙烯酸复合树脂(La-PAA)。试验表明,当500 mg/L氟离子溶液pH值为5、吸附时间为300 min时,La-PAA对氟离子的去除率在90%以上。Langmuir方程能较好地拟合氟离子在La-PAA上的吸附等温线,最大吸附量为159.24 mg/g,吸附动力学过程符合准二级动力学方程。     

酸改性污泥基复合陶粒对Pb2+的吸附性能研究

以污泥、磷尾矿和赤泥为原料制备陶粒,用盐酸、硝酸和柠檬酸进行改性,研究陶粒对水中Pb2+的吸附效果,并通过扫描电镜（SEM）、表面基团、零电荷点（pHPZC）和傅里叶红外光谱（FTIR）分析陶粒对Pb2+的吸附机理。结果表明,低浓度盐酸或硝酸改性陶粒对Pb2+的去除率更好,柠檬酸改性陶粒对Pb2+的去除率低于未改性陶粒。酸改性陶粒具有比表面积大、孔隙结构发达、酸性基团含量多、等电点低等特点,对Pb2+的吸附同时存在物理吸附和化学吸附过程,可用作含Pb2+废水的处理材料。     

无机纳米材料吸附分离放射性核素的研究进展

介绍了无机纳米材料特殊的理化性质,综述了纳米氧化物、纳米含氧酸盐和碳纳米管等无机纳米材料在放射性核素吸附分离中的研究进展。提出应对纳米材料进行负载、修饰或功能化研究,制备高性能的复合纳米材料,提高其稳定性和选择性;寻求更经济可行的制备方法,降低纳米材料的生产成本,逐步实现产业化;深入研究纳米材料对放射性核素的吸附机理;在辐射效应对纳米吸附剂的结构稳定性影响方面开展研究,并与现有方法作比较,评价其应用的有效性和可靠性。     

层状双氢氧化物在砷污染水体/土壤修复中的应用研究进展

综述了层状双氢氧化物（LDHs）的结构、特性及其在砷污染水体/土壤修复中的应用研究现状,介绍了共沉淀、水热合成、离子交换、溶胶〖CD*2〗凝胶、焙烧等LDHs制备方法,以及表面改性、插层、焙烧复原等改性方法。分析了LDHs吸附除砷的机理和影响因素,以及当前在材料合成、优化和应用过程中存在的不足,提出了形成工业化生产工艺、研发选择性和稳定性更强的复合材料、提升在复杂基体中的抗冲击负荷能力、探讨同构置换对层状结构的影响等后续研究方向。     

活性炭负载催化剂去除燃煤烟气中单质汞的研究

以贵州凯里褐煤进行燃烧实验,研究采用CoCl2(负载量20%)改性的活性炭去除烟气中的单质汞。颗粒态汞占烟气总汞的87%,而单质汞占气态汞的80.4%。改性活性炭吸附了气态汞中97%的单质汞,而吸收液只吸收了3%的单质汞。可见改性活性炭也能有效地吸附煤燃烧实验中的烟气汞。实验结果表明,煤中汞的释放率为59.5%,1kg的改性活性炭可以吸附208t煤所产生的烟气中的气态单质汞。     

Topsoil and Housedust Metal Concentrations in the Vicinity of a Lead Battery Manufacturing Plant

The aim of the study was to determine the extent of heavy metal pollution in the vicinity of a lead battery manufacturing plant in the Czech Republic, both in the general environment and within homes. Topsoils (0–5 cm) were sampled from 100 sites along 4 transects which crossed the battery factory, the town centre and outlying rural areas. Housedust samples were collected from 15 plant-workers' homes and 15 non plant-workers' homes located at various distances from the factory. Samples were analysed for levels of Pb, Zn, Cd, Cu, As and Sb, using ICP-AES. Soil concentrations of Pb, Cd, As and Sb peaked at the perimeter fence of the battery factory with Pb levels of up to 12 650 g g> ^-1. Concentrations of these metals decreased exponentially within 500 m of the plant. Whilst the battery factory does appear to be a source of all the metals with the exception of Zn, emissions do not appear to be transported to any great extent over distances of more than 0.5 km. Topsoil and housedust concentrations of Pb, Zn, Cd, Cu, As and Sb in the general Mlada Boleslav area do not appear to be significantly different from those recorded in a large scale survey of urban soils in the United Kingdom. A comparison of housedust Pb concentrations in homes of plant workers and non-plant workers suggests that there may be a small input of Pb into the home environment by battery plant employees.     

微波消解-原子吸收光度法测定土壤中铜锌铅镉镍铬

用微波消解－原子吸收光度法测定土壤中铜，锌，铅，镉，镍和铬。通过硝酸－氢氟酸－过氧化氢体系消解液对土壤样品消解，选择出微波最佳消解条件。对硝酸－盐酸－过氧化氢体系消解液和硝酸－氢氟酸－过氧化氢体系消解液进行消解对比试验，发现前者不能将土壤样品完全消解，后者能将样品消解完全，但需将消解液中剩余的酸赶尽，否则测定结果将明显偏低。微波消解土壤与传统电热消解相比，操作简便快速，可提高工作效率。     

An Overview of Contaminant-Related Issues Identified by Monitoring in San Francisco Bay

The San Francisco Estuary Regional Monitoring Program for Trace Substances (RMP) began in 1993 and is sponsored by 74 local, state, and federal agencies and companies through their discharge or Bay use permits. The RMP monitors water, sediment, toxicity, and bivalve bioaccumulation at 25 sites in the Bay that are considered to represent "background" conditions. Several major environmental issues have been identified by the RMP. Polychlorinated biphenyls and mercury were often above water quality guidelines, and often occurred in fish tissues above U.S. Environmental Protection Agency (U.S. EPA) screening values. Concentrations do not appear to be decreasing, suggesting continuing inputs. Episodes of aquatic toxicity often occurred following runoff events that transport contaminants into the Bay from urbanized and agricultural portions of the watershed. Sediment toxicity occurred throughout the Bay, and has been correlated with concentrations of specific contaminants (chlordanes, polynuclear aromatic hydrocarbons) at some locations; mixtures of contaminants were probably also important. Since the RMP does not monitor all ecosystem components, assessments of the overall condition of the Bay cannot be made. However, in terms of contamination, the RMP samples suggest that the South Bay, and North Bay sites are moderately contaminated.     

Biomagnification factors (fish to Osprey eggs from Willamette River,Oregon, U.S.A.) for PCDDs,PCDFs, PCBs and OC pesticides

A migratory population of 78 pairs of Osprey (Pandion haliaetus) nesting along the Willamette River in westernOregon was studied in 1993. The study was designed to determinecontaminant concentrations in eggs, contaminant concentrationsin fish species predominant in the Ospreys diet, andBiomagnification Factors (BMFs) of contaminants from fish specieseaten to Osprey eggs. Ten Osprey eggs and 25 composite samplesof fish (3 species) were used to evaluate organochlorine (OC)pesticides, polychlorinated biphenyls (PCBs), polychlorinateddibenzo-p-dioxins (PCDDs), and polychlorinated dibenzofurans(PCDFs). Mercury was also analyzed in fish. Geometric meanresidues in Osprey eggs were judged low, e.g., DDE 2.3 g g^-1 wet weight (ww), PCBs 0.69 g g^-1, 2,3,7,8-TCDD 2.3 ng kg^-1, and generally well below known threshold values for adverse effects on productivity, and the population was increasing. Osprey egg residue data presentedby River Mile (RM) are discussed, e.g., higher PCDDs were generally found immediately downstream of paper mills and eggsfrom the Willamette River had significantly elevated PCBs and PCDDs compared to reference eggs collected nearby in the CascadeMountains. Prey remains at nest sites indicated that the Largescale Sucker (Catostomus macrocheilus) and NorthernPikeminnow (Ptychocheilus oregonensis) accounted for an estimated 90.1% of the biomass in the Osprey diet, and composite samples of these two species were collected from different sampling sites throughout the study area for contaminant analyses. With the large percentage of the fishbiomass in the Osprey diet sampled for contaminants (and fisheaten by Ospreys similar in size to those chemically analyzed),and fish contaminant concentrations weighted by biomass intake, a mean BMF was estimated from fish to Osprey eggs for the largeseries of contaminants. BMFs ranged from no biomagnification(0.42) for 2,3,7,8-TCDF to 174 for OCDD. Our findings for themigratory Osprey were compared to BMFs for the resident HerringGull (Larus argentatus), and differences are discussed. Webelieve a BMF approach provides some basic understanding ofrelationships between contaminant burdens in prey species offish-eating birds and contaminants incorporated into their eggs,and may prove useful in understanding sources of contaminants inmigratory species although additional studies are needed.     

The Draft of the New German Guideline VDI 3782/8 to Model Automobile Exhaust Dispersion

The draft of the German guideline to calculate automobile exhaust dispersion is explained. It contains a two-stage-system: For first quick estimates the guideline contains the simple models MLuS and STREET. In case these models are not applicable or their results shows concentration levels close to the air quality standards, the more complex models PROKAS_V and MISKAM are recommended. PROKAS_V is a Gaussian plume model, MISKAM is a 3-dimensional microscale non hydrostatic flow model for built-up areas with an Eulerian dispersion model. The guideline comprises cases in rural areas without or with few adjacent buildings as well as urban areas with buildings near the roads. The contribution gives information about the models, typical results and some of the problems showing up presently.     

Hydrocarbon Utilization in Yeast Isolates Found to Grow in Association with Petroleum in a Polluted Ultisol of Midwestern Nigeria

The population counts of hydrocarbon-utilising yeasts weremonitored at six sampling stations in the Benin City municipalarea over a four-week period. Although the population countswere relatively constant in each locality, the highest countsoccurred in areas heavily polluted by domestic and industrialeffluents. A total of thirty-five hydrocarbon-degrading yeastswere isolated from soil at the sampling stations usingn-hexadecane as sole carbon source. The isolates were identifiedas belonging to the genera Candida (27 strains), Endomycopsis (4 strains). All the organisms grew on long-chainn-alkane, kerosene, diesel oil and crude oil but failed to growon short-chain n-alkane, aromatic and alicyclic hydrocarbons.Measurement of growth attributes of the isolates usingn-hexadecane, diesel oil and crude oil as substrates showed thatthe Candida species were better utilizers of hydrocarbonsubstrates relative to Endomycopsis and Schizosaccharomyces species.     

Hydrologic–Economic Model for Managing Irrigation Intensity in Irrigation Areas under Watertable and Soil Salinity Targets

This paper gives mathematical details and sample applications of SWAGMAN Farm (SWAGMAN, Salt Water and Groundwater Management), a farm-scale hydrologic economic model that integrates agronomic, climatic, irrigation, hydrogeological and economic aspects of irrigated agriculture. The model is capable of determining optimum mix of land use to keep watertable and soil salinity within acceptable limits while maximising the economic returns. Alternatively, the model can simulate water and salt balance and economics of a given cropping preference. Web-based and Geographic Information Systems versions of the model are available for integration with the environmental reporting systems of the irrigation areas.     

火焰原子吸收光谱法测定苏州开发区26种蔬菜中铜锌铁锰镍

用火焰原子吸收光谱法测定了苏州开发区26种蔬菜中的铜、锌、铁、锰和镍的含量。蔬菜样品用硝酸高氯酸混合酸进行消解。4次测定值的相对标准差<5%,加标回收率在92%～107%之间。26种蔬菜中铜、锌、铁、锰、镍的含量基本均在世贸组织规定的范围内。     

Using Multiple Taxonomic Groups to Index the Ecological Condition of Lakes

Biological indicators of communitiestypically reflect a common environmental signalreflecting the general condition of the ecosystem, as well asindividual signals by indicators differentiallysensitive to particular environmental conditions. Wedescribe here a method of integrating and interpretingsuch indicators from 19 New England lakes for fivetaxonomic groups (diatoms, benthos, zooplankton, fish,and birds). Our approach provides a systematicstandardized way to integrate multiple metrics fromdifferent taxonomic groups by addressing four elementscrucial to analyzing data from multiple indicators: covariate control, re-scaling of data, standardizing the sign of responses, and dimensional reduction. We evaluated the biologicalmetrics against individual environmental stressors andagainst multivariate physicochemical metricscharacterizing general anthropogenic stress among thelakes. The method detected a response to variationin the gross environmental condition of the lakes thatwas correlated across taxa and metrics. In addition,a differential response to near shore conditions wasdemonstrated for fish. The success of the approach inthis study lends support to its general application toecological monitoring involving complex data sets.     

Concentrations of Cadmium, Mercury and Selenium in Blood, Liver and Kidney of Common Eider Ducks from the Canadian Arctic

We determined concentrations of selected trace elements inlivers, kidneys and blood samples from common eiders (Somateria mollissima borealis) from the eastern Canadianarctic during 1997 and 1998. Concentrations of totalmercury and organic mercury were generally low in the liversof these birds (less than 6 and 4 g g^–1 dry wt,respectively). Selenium ranged between 11–47 g g^–1 inlivers. Renal cadmium concentrations were among the highestever published for this species (range: 47–281 g g^–1). The regressions of log-transformed concentrations ofthese trace elements in blood samples on those in liver orkidney were significant (all P-values < 0.05) andpositive. However, except for organic mercury (RM ² = 0.83), the co-efficients of determination were low tomoderate (range of R ²: 0.26–0.52), suggesting poorto moderate predictive capability. Furthermore, therelationships between total mercury in blood and liverchanged between 1997 and 1998, suggesting that it would notbe possible to predict consistently, concentrations ofmercury in blood from those in liver based on samples takenin one year. Blood samples can be used to determineconcentrations of these trace elements in common eiders (andprobably other sea duck species as well). The use of bloodsamples is especially warranted when it is undesirable tokill the animal such as when working with rare or endangeredsea duck species or when the objective is to relate traceelement exposure to annual survival rates. However, thepredictive equations developed here should not be used topredict expected concentrations in one type of tissue fromthose in the other.