Retrofit NO x Control Options

Modifications to the combustion process have been the basis for NO_x control on new coal-fired power plants to meet federal New Source Performance Standards (NSPS) Promulgated in 1971 and revised in 1978. In the event that retrofit NO_x control is required on pre-NSPS plants, low-NO_x combustion will likely be the least cost approach, if such controls can be successfully applied to the wide diversity of these older utility boiler designs now in operation. A series of retrofit low-NOx combustion demonstrations supported by EPRI and electric utility companies are intended to establish the technical and economic feasibility of this approach.     

Reburning for Cyclone Boiler N0x Control

Recent pilot-scale testing cosponsored by the Electric Power Research Institute (EPRI) and the Gas Research Institute (GRI) indicates that reburning can reduce NO_x emissions by 40-60 percent in cyclone boilers when pulverized coal (PC), oil, or natural gas is used as the reburn fuel. The pilot tests, performed at the Babcock and Wilcox (B&W) Alliance Research Center using a six million Btu/h cyclone-fired pilot-scale furnace, were designed to confirm and expand upon the conclusions of an earlier B&W feasibility study. That study predicted reburning could reduce NO_x by 50 percent in most cyclone boilers now in operation.     

Catalytic effect on hydrogen de/absorption properties of MgH2 − x wt% MM (x = 0, 10, 20, 30) nanomaterials

Environmental Science and Pollution Research - Reversible hydrogen storage in MgH2 under specified conditions is a possible way for the positive reception of hydrogen economy, in which the...     

Cadmium background content in meat,liver and kidney from cattle and its consequences to cadmium tolerance levels (x)

The natural background of cadmium content in meat, liver and kidney from 287 cattle from a non polluted area in the subalpine region of Bavaria has been analyzed during the period from 1972 to 1975. The cadmium content in meat was always below the detection limit of 0.005, in liver between < 0.005 to 1.65 (median 0.050) and in kidney 0.008 to 1.95 (median 0.229) ppm Cadmium in fresh weight. The cadmium contents are discussed and compared with preliminary suggestions for cadmium tolerance levels and their consequence for food inspection.     

The black rock series supported SCR catalyst for NO x removal

Environmental Science and Pollution Research - Black rock series (BRS) is of great potential for their plenty of valued oxides which include vanadium, iron, alumina and silica oxides, etc. BRS was...     

Modeling the impact of ozone x drought interactions on regional crop yields

The influence of soil moisture stress on crop sensitivity to O3 was evaluated for corn (Zea mays L.), cotton (Gossypium hirsutum L.), soybean (Glycine max L. Merr.), and wheat (Triticum aestivum L.) grown in the United States. This assessment was accomplished by using yield forecasting models to estimate the influence of soil moisture deficits on regional yield and a previously developed model to predict moisture stress x O3 interactions. Reduced crop sensitivity to O3 was predicted for those regions and years for which soil moisture stress reduced yield. The models predicted a drought-induced reduction in crop sensitivity to O3 of approximately 20% for the 1979 to 1983 period; i.e. a hypothetical O3-induced yield reduction of 5% for adequately watered crops would have been reduced to a 4% effect by the 1979 to 1983 distribution of soil moisture deficits. However, predicted drought effects varied between crops, regions, and years. Uncertainties in the model predictions are also discussed.     

A semiparametric statistical approach for forecasting SO2 and NO x concentrations

This study develops a new semiparametric statistical approach for urban air quality forecasting. Compared to conventional approaches, the semiparametric approach allows the model users to benefit from the positive aspects and alleviate the negative ones of parametric and nonparametric approaches. Two advantages of the approach lie in (1) the interpretation of the data set being easily decoded and used by the model and (2) its capability in dependence on prior assumption. To illustrate the performance of the proposed approach, three semiparametric regression models (i.e., linear-, quadratic-, and interactive-based semiparametric regression) are applied to an air quality forecasting problem in the city of Xiamen, China, and satisfactory training and prediction performance are obtained. The three models are also compared to three parametric and two nonparametric regression models. The results indicate that the predictive accuracy of semiparametric regression models is higher than those obtained from the parametric and stepwise cluster analysis models. However, the proposed three semiparametric regression models could be much favored, since they can be achieved more easily and rapidly than the artificial neural network model.     

Optimization of Reburning for Advanced N0x Control on Coal-fired Boilers

This paper summarizes an experimental study which was conducted to investigate the chemical constraints of the reburning process and identify reburning configurations for optimal NO_x reduction in coal-fired boilers. Tests were performed on a bench scale tunnel furnace to characterize and optimize the fuel-rich reburning zone and the fuel-lean burnout zone independently. Detailed measurements ofunburned hydrocarbons, CO, NH₃, and HCN were made at the reburning zone exit. The influence of the concentrations of reactive species was examined as were temperature effects for both the reburning and burnout zone. Results indicated that reburning zone chemistry was not rate limiting. The impacts of temperature and burnout zone oxidation were of major importance. Integration of the optimum reburning and burnout zone configurations resulted in increased NO_x reduction. Over 85 percent reduction in NO_x emissions was achieved with ammonium sulfate injection in the burnout zone under optimum reburning conditions.     

Trends in Emissions of PM,SO x and NO X,and VOC:NO X Ratios and Their Implications for Trends in pH near Industrialized Areas

The following address was presented by Mr. Costle on June 23 at the opening plenary session of the 73rd APCA Annual Meeting and Exhibition in Montreal.     

Whole-plant growth and leaf formation in ozonated hybrid poplar (Populus x euramericana)

Seasonal growth was studied in potted cuttings of hybrid poplar (one clone of Populus x euramericana) either exposed to ozone in filtered air (0 = control, 0.05, 0.10 microl litre(-1)) or in ambient air (mean = 0.03 microl litre(-1)). Only at 0.10 microl litre(-1) was biomass production reduced and related to leaf loss rather than leaf formation, since the latter was similar in all treatments. Stem length at 0.10 microl litre(-1) approached that of the control, whereas starch concentration in the green stem bark tended to be reduced, as were the ratios of stem weight/length and root/shoot biomass. The changes in carbon allocation and biomass production gradually became established during the second half of the growing season. At the altered carbon allocation at 0.10 microl litre(-1), the ratio of whole-plant production/attached foliage area resembled that of the other O(3) regimes. However, the latter ratio was strongly reduced at 0.10 microl litre(-1) when calculated on the basis of the potential foliage area, as compensated for the O(3)-induced leaf loss. Thus the carbon return/cost balance of the totally formed foliage was low, although the relative-growth rate of ozonated plants temporarily reached that of the control. The relation between leaf differentiation under ozonation (lowered stomatal density) and whole-plant production remains uncertain. The plant behavior found is discussed in terms of passive response or acclimatization to O(3) stress.     

Effect of Hydrocarbon and NO x on Photochemical Smog Formation under Simulated Transport Conditions

The body of information presented in this paper is directed to those individuals concerned with the effect of urban pollution on downwind areas. Concern has been expressed over the appropriate hydrocarbon and NO _x control strategy to be used in minimizing the effects of ozone and NO₂ on urban population centers and their downwind environs. O₃ and NO₂ formation were studied in smog chamber irradiations as a function of the initial NO _x concentration at three hydrocarbon concentrations. By carrying out the irradiations for a period of time equivalent to one solar day in a continuously diluting system, smog formation in a chemically reacting pollutant system under transport was simulated. The results of this experimental simulation suggest that hydrocarbon reduction reduces O₃ in urban as well as downwind areas while NO _x reduction increases O₃ in the urban area and has little effect on O₃ in downwind areas. Both hydrocarbon and NO _x reduction will reduce atmospheric NO₂ levels, with the effect of NO _x reduction generally being more pronounced.     

Integrated Sampling and Analysis Methods for Determining NO x Emissions at Electric Utility Plants

Two integrated sampling and analysis methods for determining NO_x emissions in electric utility plants were developed and field tested. The collection systems consist of: a 4.0% potassium permanganate-2.0% sodium hydroxide solution in restricted-orifice impingers, and a 5A° molecular sieve in midget impingers. Sample analysis is accomplished by a colorimetric or ion-chromatographic procedure with the alkaline-permanganate method and by a colorimetric procedure with the molecular sieve method. The alkalinepermanganate method gives excellent agreement with the EPA reference method, Method 7, for NO _x measurements. The molecular sieve method shows a significant negative bias relative to Method 7. It is anticipated that the permanganate methods will be proposed as alternates to Method 7, for NO _x determinations, under the EPA New Source Performance Standards.     

Quantification of hourly variability in NO(x) emissions for baseload coal-fired power plants

The objectives of this paper are to (1) quantify variability in hourly utility oxides of nitrogen (NO(x)) emission factors, activity factors, and total emissions; (2) investigate the autocorrelation structure and evaluate cyclic effects at short and long scales of the time series of total hourly emissions; (3) compare emissions for the ozone (O3) season versus the entire year to identify seasonal differences, if any; and (4) evaluate interannual variability. Continuous emissions monitoring data were analyzed for 1995 and 1998 for 32 units from nine baseload power plants in the Charlotte, NC, airshed. Unit emissions have a strong 24-hr cycle attributable primarily to the capacity factor. Typical ranges of the coefficient of variation for emissions at a given hour of the day were from 0.2 to 0.45. Little difference was found when comparing weekend emissions with the entire week or when comparing the O3 season with the entire year. There were substantial differences in the mean and standard deviation of emissions when comparing 1995 and 1998 data, indicative of the effect of retrofits of control technology during the intervening time. The wide range of variability and its autocorrelation should be accounted for when developing probabilistic utility emission inventories for analysis of near-term future episodes.     

Effect of solution pH on SO2, NO(x), and Hg removal from simulated coal combustion flue gas in an oxidant-enhanced wet scrubber

This paper presents a study on the simultaneous removal of SO2, NO(x) and Hg (both Hg0 and Hg2+) from a simulated flue gas by oxidant injection in a bench-simulated wet limestone scrubber for a wide range of slurry pH. The slurry pH strongly influenced the chemical mechanism in the scrubber and, therefore, affected pollutant removal. This paper also examines the potential ClO2(gas) reemission from a developed multipollutant scrubber at different slurry pHs. To better understand the chemical mechanisms at each slurry pH and to apply a mass balance to the process, detailed product ion analyses were performed for all experiments. Ion analysis covered three different chlorine species (chlorite, chloride, chlorate), sulfate, nitrite and nitrate. Different NO(x) removal efficiencies and mechanisms were found in acidic and alkaline pHs in the multipollutant scrubber. The acidic solution was favorable for NO and Hg0 oxidation, but increasing the slurry pH above 7.0 was disadvantageous for NO and Hg oxidation/removal. However the rate of NO(x) absorption (by percentage) was higher for the alkaline solution.     

Atmospheric transport of urban-derived NH(x): Evidence from nitrogen concentration and delta(15)N in epilithic mosses at Guiyang, SW China

Nitrogen concentration and δ¹⁵N in 175 epilithic moss samples were investigated along four directions from urban to rural sites in Guiyang, SW China. The spatial variations of moss N concentration and δ¹⁵N revealed that atmospheric N deposition is dominated by NH_x-N from two major sources (urban sewage NH₃ and agricultural NH₃), the deposition of urban-derived NH_x followed a point source pattern characterized by an exponential decline with distance from the urban center, while the agricultural-derived NH_x was shown to be a non-point source. The relationship between moss N concentration and distance (y = 1.5e^−0.13x + 1.26) indicated that the maximum transporting distance of urban-derived NH_x averaged 41 km from the urban center, and it could be determined from the relationship between moss δ¹⁵N and distance [y = 2.54 ln(x) − 12.227] that urban-derived NH_x was proportionally lower than agricultural-derived NH_x in N deposition at sites beyond 17.2 km from the urban center. Consequently, the variation of urban-derived NH_x with distance from the urban center could be modeled as y = 56.272e^−0.116x − 0.481 in the Guiyang area.     

Evaluation of NO(x) flue gas analyzers for accuracy and their applicability for low-concentration measurements

The requirements of the Texas State Implementation Plan of the U.S. Clean Air Act for the Houston-Galveston Ozone Nonattainment Area stipulate large reductions in oxides of nitrogen (NO(x)) emissions. A large number of sources at Dow Chemical Co. sites within the nonattainment area may require the addition of continuous emission monitoring systems (CEMS) for online analysis of NO(x), CO, and O2. At the outset of this work, it was not known whether the analyzers could accurately measure NO(x) as low as 2 ppm. Therefore, NO(x) CEMS analyzers from five different companies were evaluated for their ability to reliably measure NO(x) in the 2-20 ppm range. Testing was performed with a laboratory apparatus that accurately simulated different mixtures of flue gas and, on a limited basis, simulated a dual-train sampling system on a gas turbine. The results indicate that this method is a reasonable approach for analyzer testing and reveal important technical performance aspects for accurate NO(x) measurements. Several commercial analyzers, if installed in a CEMS application with sampling conditioning components similar to those used in this study, can meet the U.S. Environmental Protection Agency's measurement data quality requirements for accuracy.     

Hydrogenation properties and kinetic study of MgH2 - x wt% AC nanocomposites prepared by ball milling

Environmental Science and Pollution Research - The high de-/hydrogenation temperature of magnesium hydride is still a challenge in solid-state hydrogen storage system for automobiles applications....     

Removing and recovering gas-phase elemental mercury by Cu(x)Co(3-x)O(4) (0.75< or = x < or =2.25) in the presence of sulphur compounds

The Hg(0) oxidation ability and reusability of Cu(x)Co(3-x)O(4) were investigated in an attempt to improve SO(2) anti-poisoning ability of metal oxide and produce more economic and effective sorbents for the control of Hg(0) emission from combustion processes. The influence of copper content on Cu(x)Co(3-x)O(4)'s (0.75< or = x < or =2.25) oxidation ability of Hg(0) in the presence of SO(2) was investigated. According to the X-ray diffraction, Brunauer-Emmett-Teller (BET) and mass balance analysis on mercury, we found that Cu(1.5)Co(1.5)O(4) showed the highest S(BET) and best Hg(0) oxidation ability. With continuous increase of x from 0.75 to 2.25, Cu(x)Co(3-x)O(4)'s SO(2) anti-poisoning ability increased. The analysis results of the X-ray photoelectron spectroscopy manifested that the adsorptive mercury species on spent Cu(1.5)Co(1.5)O(4) was HgO. The spent Cu(1.5)Co(1.5)O(4) could be regenerated by thermal decomposition at 673K and regenerated Cu(1.5)Co(1.5)O(4) showed higher Hg(0) oxidation ability due to Hg-doping. Regenerated enrichment Hg(0) was collected using activated carbon at an ambient temperature to eliminate the secondary pollution.