VOCs在线监测进样方式对非甲烷总烃测定的影响

采用正压、负压、大气平衡3种进样方式,研究了VOCs在线监测系统对非甲烷总烃测定的影响。探讨在大气平衡进样方式下定量环内压力、平衡时间、进样流量对非甲烷总烃测定的影响,研究结果表明：采用正压进样方式,定量环内正压增大,非甲烷总烃质量浓度偏高;采用负压进样方式,定量环内负压增大,非甲烷总烃质量浓度降低;采用大气平衡进样方式,定量环内压力、平衡时间、进样流量的增大或减小对非甲烷总烃测定没有明显影响。比较3种进样方式,大气平衡进样方式的VOCs在线监测系统能够提高非甲烷总烃在线监测结果的准确性和可靠性,更适用于污染源废气在线监测。     

Dual-camera, high-resolution aerial assessment of pipeline revegetation

Energy-extraction results in significant disturbance to rangelands in Wyoming and other western US states. Although reclamation is required by law, US General Accounting Office reports from 1999 and 2005 are clear that affected government agencies have--over much of the past decade--had difficulty accomplishing mandated environmental monitoring of extraction-related disturbance. We evaluated two pipeline rights of way (ROW) using nested images (1- or 2- with 13- or 20-mm ground sample distance (GSD)) acquired during Very-Large Scale Aerial (VLSA) surveys. Aerial monitoring allowed for the collection of large numbers of geocoded samples, and for subsequent cover measurements using methods with demonstrated accuracy equal to that of conventional ground-based methods. Both pipelines had vegetative-cover deficiencies relative to their Plan of Development (POD) requirements. Using bare ground and ground-cover measurements from the higher-resolution imagery, we present a spatial representation of each pipeline ROW that allows quick identification of sections of the ROW that may need further reclamation action to meet POD standards. We also present aerial monitoring costs. We recommend VLSA pipeline surveys as a means for facilitating required environmental monitoring and for addressing the monitoring backlog that has developed with increased energy-extraction activity.     

Comparison of different static methods for assessment of AMD generation potential in mining waste dumps in the Muteh Gold Mines,Iran

Acid mine drainage (AMD) gives rise to several problems in sulfide-bearing mineral deposits whether in an ore body or in the mining wastes and tailings. Hence, several methods and parameters have been proposed to evaluate the acid-producing and acid-neutralizing potential of a material. This research compares common static methods for evaluation of acid-production potential of mining wastes in the Muteh gold mines by using 62 samples taken from six waste dumps around Senjedeh and Chah-Khatoun mines. According to a detailed mineralogical study, the waste materials are composed of mica-schist and quartz veins with a high amount of pyrite and are supposed to be susceptible to acid production, and upon a rainfall, they release acid drainage. All parameters introduced in different methods were calculated and compared in this research in order to predict the acid-generating and neutralization potential, including APP, NNP, MPA, NPR, and NAGpH. Based on the analytical results and calculation of different parameters, all methods are in a general consensus that DWS-02 and DWS-03 waste dumps are acid-forming which is clearly attributed to high content of pyrite in samples. DWS-04 is considered as non-acid forming in all methods except method 8 which is uncertain about its acid-forming potential and method 7 which considers a low potential for it. DWC-01 is acid-forming based on all methods except 8, 9, 10, and 11 which are also uncertain about its potential. The methods used are not reached to a compromise on DWS-01 and DWC-02 waste dumps. It is supposed that method 7 gives the conservationist results in all cases. Method 8 is unable to decide on some cases. It is recommended to use and rely on results provided by methods 1, 2, 3, and 12 for taking decisions for further studies. Therefore, according to the static tests used, the aforementioned criteria in selected methods can be used with much confidence as a rule of thumb estimation.     

PM2.5全自动重量法监测仪测量准确度评估

BTPM-AS1PM_(2.5)全自动重量法监测仪是一种根据PM_(2.5)手工重量法原理设计的PM_(2.5)自动监测仪器,能够实现样品采集、滤膜平衡、滤膜称重等环节的自动化。采用线性回归分析法对PM_(2.5)全自动重量法监测仪器的监测结果与PM_(2.5)连续自动监测仪器、手工标准方法进行比对分析,讨论了该原理仪器的流量准确性、滤膜平衡效果、天平稳定性。结果显示:PM_(2.5)全自动重量法仪器监测结果与PM_(2.5)连续自动监测仪器、手工重量法监测结果的相关系数为0.927 2~0.994 1,监测结果之间具有较高的一致性,并且其样品采集、滤膜平衡、滤膜称重等关键环节的主要技术指标能够满足中国PM_(2.5)手工标准测定方法的相关要求。     

工厂噪声对厂外环境的影响预测方法及实例计算

本文论述了工厂的室内和室外声源的几种传播计算模式，指出了具体的计算方法和简化办法，并用具体实例进行了演算，还将计算结果与监测结果进行了比较，证明了所介绍的预测方法在实际运用中的可行性     

铀、钍联合分析技术在水样分析中的应用

在简易实验室设备条件下,利用铀、钍联合分析方法——N135萃取分光光度法,测定了环境水样和高浓度放射性水样中放射性核素铀、钍的含量,并进行了方法比对和可重复性测试。结果表明,此方法准确性较高,具有良好的适用性。     

水质综合评价的径向基函数网络模型

针对目前水质综合评价中常规方法存在的问题 ,提出了径向基函数网络模型 (简记为 RBF-ANN)。以吉林省白城市地下潜水水质资料为例 ,运用该方法对监测样点进行了综合评价。通过与其它方法对比 ,结果表明 ,利用RBF-ANN模型进行水环境质量综合评价不仅方法简便 ,而且结论更接近客观实际。     

An alternative model for evaluating the balance of carrying capacity between functional urban infrastructures

Urban infrastructures commonly include four types of functional infrastructures: traditional infrastructures, greenspace infrastructures, water infrastructures, and connective infrastructures. They work as an integrated system for supporting sustainable urban development. It is therefore important for having a proper method to help understand whether there is a balance between functional urban infrastructures' carrying capacities (FUICC). This paper introduces an alternative model named FUICC Catastrophe Model (FCM) to evaluate the balance of carrying capacity between various urban infrastructures. The development of the model FCM adopts Mean-Variance Analysis (MVA) technique and Catastrophe Progression Method (CPM) collectively. The application of FCM is demonstrated by using the empirical data collected from 35 cities in China. The research findings suggest that: 1) the difference in carrying capacity of each functional infrastructure between the sample cities is significant; 2) the difference in the degree of balance between FUICC is also significant between the sample cities; 3) the sample cities are classified into four categories, namely, acceptably balanced, less balanced, poorly balanced, and unbalanced. 4) the balance performance between FUICC among Chinese cities is characterized with polarization; 5) the balance performance of carrying capacity between functional urban infrastructures is generally poor in China, 40% of the sample cities achieving acceptable performance.     

Inventory methods for trees in nonforest areas in the great plains states

The US Forest Service’s Forest Inventory and Analysis (FIA) program collects information on trees in areas that meet its definition of forest. However, the inventory excludes trees in areas that do not meet this definition, such as those found in urban areas, in isolated patches, in areas with sparse or predominantly herbaceous vegetation, in narrow strips (e.g., shelterbelts), or in riparian areas. In the Great Plains States, little is known about the tree resource in these noninventoried, nonforest areas, and there is a great deal of concern about the potential impact of invasive pests, such as the emerald ash borer. To address this knowledge gap, FIA’s National Inventory and Monitoring Applications Center has partnered with state cooperators and others in a project called the Great Plains Initiative to design and implement an inventory of trees in nonforest areas. The goal of the inventory is to characterize the nonforest tree resource using methods compatible with those of FIA so a holistic understanding of the resource can be obtained by integrating the two surveys. The goal of this paper is to describe the process of designing and implementing the survey, including plot and sample design, and to present some example results from a reporting tool we developed.     

Comparison of three sampling and analytical methods for the determination of airborne hexavalent chromium

A field study was conducted with the goal of comparing the performance of three recently developed or modified sampling and analytical methods for the determination of airborne hexavalent chromium (Cr(VI)). The study was carried out in a hard chrome electroplating facility and in a jet engine manufacturing facility where airborne Cr(VI) was expected to be present. The analytical methods evaluated included two laboratory-based procedures (OSHA Method ID-215 and NIOSH Method 7605) and a field-portable method (NIOSH Method 7703). These three methods employ an identical sampling methodology: collection of Cr(VI)-containing aerosol on a polyvinyl chloride (PVC) filter housed in a sampling cassette, which is connected to a personal sampling pump calibrated at an appropriate flow rate. The basis of the analytical methods for all three methods involves extraction of the PVC filter in alkaline buffer solution, chemical isolation of the Cr(VI) ion, complexation of the Cr(VI) ion with 1,5-diphenylcarbazide, and spectrometric measurement of the violet chromium diphenylcarbazone complex at 540 nm. However, there are notable specific differences within the sample preparation procedures used in three methods. To assess the comparability of the three measurement protocols, a total of 20 side-by-side air samples were collected, equally divided between a chromic acid electroplating operation and a spray paint operation where water soluble forms of Cr(VI) were used. A range of Cr(VI) concentrations from 0.6 to 960 microg m(-3), with Cr(VI) mass loadings ranging from 0.4 to 32 microg, was measured at the two operations. The equivalence of the means of the log-transformed Cr(VI) concentrations obtained from the different analytical methods was compared. Based on analysis of variance (ANOVA) results, no statistically significant differences were observed between mean values measured using each of the three methods. Small but statistically significant differences were observed between results obtained from performance evaluation samples for the NIOSH field method and the OSHA laboratory method.     

Classification and mapping forest sites using geographic information system (GIS): a case study in Artvin Province

The productivity of forest sites has been indirectly determined with solo wood production objective in forest management. Forest site productivity should, however, be determined directly in order to implement ecosystem based multipurpose forest management philosophy. This article tackles the problem in distinguishing and mapping forest sites using both direct method and indirect method in Genya Mountain located in central of Artvin State Forest Enterprise. About 112 sample plots were designed and distributed over the area. In each sample plot, soil samples were collected and the classical timber inventory measurements were taken. According to direct method, Soil Moisture Regime (SMR) method is preferred due to a water deficiency in the study area. Water holding capacity was used as an essential criterion for the classification of the forest site. Forest site classifications were assigned regarding the physiographic factors such as landform, aspect, and slope. Five different forest sites classes; dry, moderate fresh, fresh, humid and hygric were determined. According to direct method, the guiding curve was used to generate anamorphic site index (SI) equations and three site index classes; good (SI=I–II), medium (SI=III) and low (SI=IV–V) were determined. Some important differences between the methods were realized. The forest sites determined with site index estimation method indicate that site index I and II is 505.99 ha, III 1095.79 ha and IV and V 992.95 ha, whereas forest sites determined with direct method related to dry site of 937.58 ha, moderate fresh site of 931.90 ha, fresh site of 1,797.71 ha, humid site of 80.48 ha and hygric site of 356.55 ha. The forest site maps of both methods were created using GIS functions. The forest sites of open and degraded areas should be determined according to direct method.     

Spatial pattern and heterogeneity of soil organic carbon and nitrogen in sand dunes related to vegetation change and geomorphic position in Horqin Sandy Land, Northern China

To assesses the effect of geomorphology, topography, and vegetation changes on spatial pattern of soil organic carbon (C) and total nitrogen (N) in sand dunes, we used the quantitative methods to examine the spatial heterogeneity of vegetation cover, soil organic C, and total N in an 11-year naturally restored mobile dune (RMD11) and a 20-year naturally restored mobile dune (RMD20) that had been fenced to exclude grazing in Horqin Sandy Land, northern China. Our results showed that the vegetation cover, plant density, species number and diversity, soil organic C, and total N increased from RMD11 to RMD20 and increased from the 50 × 50-m plot (crest) to the 100 × 100-m plot (slope) in each dune. Geostatistical analysis showed that the spatial structural variance accounted for the largest proportion of the total sample variance in vegetation cover, soil organic C, and total N in each dune plot. Calculated spatial autocorrelation ranges of vegetation cover, soil organic C, and total N increased from RMD11 to RMD20, indicating that longer time since vegetation restoration results in a more homogeneous distribution of vegetation cover, soil organic C, and total N in sand dunes. In addition, the spatial continuity of vegetation cover, soil organic C, and total N decreased from the 50 × 50-m plot (crest) to the 100 × 100-m plot (slope) in each dune. These results suggest that the spatial distribution of soil organic C and total N in sand dunes is associated closely with geomorphic position related to the dune crest and slope, relative elevation of sampling site, and vegetation cover. Understanding the principles of this relationship between them may guide strategies for the conservation and management of semiarid dune ecosystems.     

Preparation, certification and interlaboratory analysis of workplace air filters spiked with high-fired beryllium oxide

Occupational sampling and analysis for multiple elements is generally approached using various approved methods from authoritative government sources such as the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA), as well as consensus standards bodies such as ASTM International. The constituents of a sample can exist as unidentified compounds requiring sample preparation to be chosen appropriately, as in the case of beryllium in the form of beryllium oxide (BeO). An interlaboratory study was performed to collect analytical data from volunteer laboratories to examine the effectiveness of methods currently in use for preparation and analysis of samples containing calcined BeO powder. NIST SRM(?) 1877 high-fired BeO powder (1100 to 1200 °C calcining temperature; count median primary particle diameter 0.12 μm) was used to spike air filter media as a representative form of beryllium particulate matter present in workplace sampling that is known to be resistant to dissolution. The BeO powder standard reference material was gravimetrically prepared in a suspension and deposited onto 37 mm mixed cellulose ester air filters at five different levels between 0.5 μg and 25 μg of Be (as BeO). Sample sets consisting of five BeO-spiked filters (in duplicate) and two blank filters, for a total of twelve unique air filter samples per set, were submitted as blind samples to each of 27 participating laboratories. Participants were instructed to follow their current process for sample preparation and utilize their normal analytical methods for processing samples containing substances of this nature. Laboratories using more than one sample preparation and analysis method were provided with more than one sample set. Results from 34 data sets ultimately received from the 27 volunteer laboratories were subjected to applicable statistical analyses. The observed performance data show that sample preparations using nitric acid alone, or combinations of nitric and hydrochloric acids, are not effective for complete extraction of Be from the SRM 1877 refractory BeO particulate matter spiked on air filters; but that effective recovery can be achieved by using sample preparation procedures utilizing either sulfuric or hydrofluoric acid, or by using methodologies involving ammonium bifluoride with heating. Laboratories responsible for quantitative determination of Be in workplace samples that may contain high-fired BeO should use quality assurance schemes that include BeO-spiked sampling media, rather than solely media spiked with soluble Be compounds, and should ensure that methods capable of quantitative digestion of Be from the actual material present are used.     

M12半自动净化法与手工净化法应用于飞灰中二噁英类检测比较

研究比较了M12半自动净化法与手工净化法应用于二噁英检测的效果。结果显示,采用高分辨气相色谱-高分辨质谱法(HRGC-HRMS)检测飞灰样品中的二噁英,手工净化法的回收率要优于M12半自动净化法的回收率,但M12半自动净化法除2种单体外,其余单体回收率均满足对二噁英的分析要求,且2种净化方法所得二噁英的总毒性当量结果相近,证明手工净化法与HRGC-HRMS联用检测飞灰中二噁英的效果较好,但M12半自动净化法也能够满足HRGC-HRMS检测二噁英的净化要求。应用酶联免疫法检测飞灰样品中二噁英的总毒性量,当样品中二噁英浓度较高时,M12半自动净化法和手工净化法净化测得结果与基准值一致性较好;当样品中二噁英浓度较低时,手工净化法检测结果与基准值差别较大,表明酶联免疫法更适合用M12半自动净化法进行净化。     

挥发性有机物污染土壤样品采样方法比较

以苯系物污染土壤样品的采集为例,比较了4种不同采样方法导致样品检测结果的差异。其中,方法 1将样品装填至广口瓶内并压实密封,方法2采用非扰动采样器采集10 g样品后转移至加有10 mL甲醇保护剂的Vial瓶中密封,方法 3用非扰动采样器采集10 g样品后直接将其密封于采样器内,方法 4用Encore采样器采样后将其密封于采样器内。结果表明,方法 2采集样品的检出率最高,其余3种方法的差异不明显,方法 2采集样品的检出结果 71%以上都大于其余3种方法。而且,对于挥发性较强的苯与甲苯,以方法 2采集的样品91%以上都大于其余3种方法,最大及平均检出浓度高出2~3个数量级。5种不同土质样品检测结果表明,对于有机质含量较低的细砂,方法2的最高及平均检出浓度均高于其余3种方法 1~3个数量级,差异随土壤有机质含量的升高而降低。可见,对于苯系物及挥发性强于苯系物的其他挥发性有机物污染土壤样品的采集,方法 2效果最优,可指定为VOCs污染场地土壤样品的采样方法。     

Addressing analytical uncertainties in the determination of trichloroacetic acid in soil

Soil is an important compartment in the environmental cycling of trichloroacetic acid (TCA), but soil TCA concentration is a methodologically defined quantity; analytical methods either quantify TCA in an aqueous extract of the soil, or thermally decarboxylate TCA to chloroform in the whole soil sample. The former may underestimate the total soil TCA, whereas the latter may overestimate TCA if other soil components (e.g. humic material) liberate chloroform under the decarboxylation conditions. The aim of this work was to show that extraction and decarboxylation methods yield different TCA concentrations because the decarboxylation method can also determine "bound" TCA. Experiments with commercial humic acid solutions showed there was no additional chloroform formation under decarboxylation conditions, and that all TCA in a TCA-humic acid mixture could be quantitatively determined (108 +/- 13%). Anion exchange resin was used as a provider of solid-phase TCA binding; only 5 +/- 1% of a TCA solution mixed with the resin was present in the aqueous extract subsequently separated from the resin, yet the decarboxylation method yielded mass balance (123 +/- 22%) with TCA remaining in the resin. In aqueous extraction of a range of soil samples (with or without added TCA spike), the decarboxylation method was able to satisfactorily account for TCA in the extractant + residue post-extraction, compared with whole-soil TCA (+ spike) pre-extraction: e.g. mass balances for unspiked soil from Sikta spruce and larch forest were 99 +/- 8% and 93 +/- 6%, respectively, and for TCA-spiked forest and agricultural soils were 114 +/- 13% and 102 +/- 2%. In each case recovery of TCA in the extractant was substantially less than 100%(<20% for unspiked soils, <55% for spiked soils). Extraction efficiencies were generally lower in more organic soils. The results suggest that analytical methods which utilise aqueous extraction may underestimate whole-soil TCA concentrations. Application of both methodologies together may enhance insight into TCA behaviour in soil.     

Evaluating performance of stormwater sampling approaches using a dynamic watershed model

Accurate quantification of stormwater pollutant levels is essential for estimating overall contaminant discharge to receiving waters. Numerous sampling approaches exist that attempt to balance accuracy against the costs associated with the sampling method. This study employs a novel and practical approach of evaluating the accuracy of different stormwater monitoring methodologies using stormflows and constituent concentrations produced by a fully validated continuous simulation watershed model. A major advantage of using a watershed model to simulate pollutant concentrations is that a large number of storms representing a broad range of conditions can be applied in testing the various sampling approaches. Seventy-eight distinct methodologies were evaluated by "virtual samplings" of 166 simulated storms of varying size, intensity and duration, representing 14 years of storms in Ballona Creek near Los Angeles, California. The 78 methods can be grouped into four general strategies: volume-paced compositing, time-paced compositing, pollutograph sampling, and microsampling. The performances of each sampling strategy was evaluated by comparing the (1) median relative error between the virtually sampled and the true modeled event mean concentration (EMC) of each storm (accuracy), (2) median absolute deviation about the median or "MAD" of the relative error or (precision), and (3) the percentage of storms where sampling methods were within 10% of the true EMC (combined measures of accuracy and precision). Finally, costs associated with site setup, sampling, and laboratory analysis were estimated for each method. Pollutograph sampling consistently outperformed the other three methods both in terms of accuracy and precision, but was the most costly method evaluated. Time-paced sampling consistently underestimated while volume-paced sampling over estimated the storm EMCs. Microsampling performance approached that of pollutograph sampling at a substantial cost savings. The most efficient method for routine stormwater monitoring in terms of a balance between performance and cost was volume-paced microsampling, with variable sample pacing to ensure that the entirety of the storm was captured. Pollutograph sampling is recommended if the data are to be used for detailed analysis of runoff dynamics.     

Evaluation of a fluorometric method for measuring low concentrations of ammonia in ambient air

A fluorometric method developed for measuring low concentrations of ammonium in marine and freshwater ecosystems was adapted for the analysis of ammonia in ambient air. The modified method entails collection of samples on an acid-treated solid adsorbent followed by analysis using a fluorometer. Optimal results were obtained using a commercially available sorbent tube containing 100 mg of acid-treated silica gel for sample collection, and an analytical protocol consisting of sample desorption in DI water, addition of orthopthaldialdehyde (OPA) working reagent, and room temperature incubation. Method accuracy and precision were evaluated by comparing experimentally determined quantities of ammonia to expected levels for sample loadings ranging from 0.16 [micro sign]g to 550 [micro sign]g-accuracy was generally within +/-20%. The estimated LOQ for the method is 0.08 [micro sign]g ammonia per sample which represents a 25-375-fold improvement in sensitivity compared to current NIOSH and OSHA methods for the measurement of ammonia in ambient air. The new method should be useful for applications requiring measurement of low concentrations of ammonia using personal sampling equipment or in the characterization of short-term fluctuations of ammonia concentrations in air.     

Assessment of vehicular pollution in Kolkata, India, using CALINE 4 model

Michigan water quality standards for public bathing beaches require local health departments to collect and analyze a minimum of three water samples for Escherichia coli during each sampling event. The geometric mean number of E. coli colonies is then compared to the 300 colonies per 100 ml standard to determine compliance. This article compares the results of the currently mandated procedure to a composite sampling method, whereby the three samples are mixed in equal volumes and analyzed once. This effectively replaces the geometric mean of the individual sample results with an arithmetic mean. Although arithmetic means are more affected by outliers, this sensitivity to high concentrations is more health conservative than the geometric mean. During the 2007 sampling season, nine bathing beaches were monitored once each week. Three individual point samples and a composite sample were analyzed for each sampling event. No statistically significant differences in bacteria concentrations were found between composite sample analysis and the arithmetic mean of individual point sample analyses. No violations were detected in the 2007 sampling season, so using historical data, a retrospective analysis was performed on samples gathered at nine bathing beaches in Kalamazoo County, Michigan during the years 2001–2007. The arithmetic mean of the three samples taken at each site served as a surrogate composite sample. The benefits of compositing the three samples were investigated assuming a 2/3 reduction in analytical costs. In the traditional sampling method, three individual samples were obtained and analyzed once in every 3-week period during the summer season, whereas compositing was simulated by taking the arithmetic mean of each week’s results. The results of this retrospective cost analysis indicates that ten to 14 violations would have been missed using the less frequent traditional sampling and analysis methodology. Composite sampling is a cost-saving alternative to traditional sampling techniques that can be more protective of public health, particularly when the savings are applied to increased numbers of samples in time or space.     

Assessing differences in macrofaunal assemblages as a factor of sieve mesh size,distance between samples,and time of sampling

With increasing cascading effects of climate change on the marine environment, as well as pollution and anthropogenic utilization of the seafloor, there is increasing interest in tracking changes to benthic communities. Macrofaunal surveys are traditionally conducted as part of pre-incident environmental assessment studies and post-incident monitoring studies when there is a potential impact to the seafloor. These surveys usually characterize the structure and/or spatiotemporal distribution of macrofaunal assemblages collected with sediment cores; however, many different sampling protocols have been used. An assessment of the comparability of past and current survey methods was in need to facilitate future surveys and comparisons. This was the aim of the present study, conducted off the Oregon coast in waters 25–35 m deep. Our results show that the use of a sieve with a 1.0-mm mesh size gives results for community structure comparable to results obtained from a 0.5-mm mesh size, which allows reliable comparisons of recent and past spatiotemporal surveys of macroinfauna. In addition to our primary objective of comparing methods, we also found interacting effects of seasons and depths of collection. Seasonal differences (summer and fall) were seen in infaunal assemblages in the wave-induced sediment motion zone but not deeper. Thus, studies where wave-induced sediment motion can structure the benthic communities, especially during the winter months, should consider this effect when making temporal comparisons. In addition, some macrofauna taxa-like polychaetes and amphipods show high interannual variabilities, so spatiotemporal studies should make sure to cover several years before drawing any conclusions.