Contamination in sediments, bivalves and sponges of McMurdo Sound, Antarctica

This study examined the concentrations of total hydrocarbons (THC), polychlorinated biphenyls (PCB), polyaromatic hydrocarbons (PAH), and trace metals (Cu, Zn, Cd, Pb, Hg and As) in marine sediments off Scott Base (NZ) and compared them with sediments near the highly polluted McMurdo Station (US) as well as less impacted sites including Turtle Rock and Cape Evans. The Antarctic mollusc, Laternula elliptica and three common sponge species were also analysed for trace metals. The mean THC concentration in sediments from Scott Base was 3 fold higher than the pristine site, Turtle Rock, but 10 fold lower than samples from McMurdo Station. McMurdo Station sediments also contained the highest concentrations of PAHs, PCBs and the trace metals, Cu, Zn, Pb, Cd and Hg. Copper was significantly higher in bivalves from McMurdo Station than other sites. Trace metal concentrations in sponges were generally consistent within sites but no spatial patterns were apparent.     

Extraction of organic contaminants from marine sediments and tissues using microwave energy.

In this study, we compared microwave solvent extraction (MSE) to conventional methods for extracting organic contaminants from marine sediments and tissues with high and varying moisture content. The organic contaminants measured were polychlorinated biphenyl (PCB) congeners, chlorinated pesticides, and polycyclic aromatic hydrocarbons (PAHs). Initial experiments were conducted on dry standard reference materials (SRMs) and field collected marine sediments. Moisture content in samples greatly influenced the recovery of the analytes of interest. When wet sediments were included in a sample batch, low recoveries were often encountered in other samples in the batch, including the dry SRM. Experiments were conducted to test the effect of standardizing the moisture content in all samples in a batch prior to extraction. SRM1941a (marine sediment). SRM1974a (mussel tissue), as well as QA96SED6 (marine sediment), and QA96TIS7 (marine tissue), both from 1996 NIST Intercalibration Exercise were extracted using microwave and conventional methods. Moisture levels were adjusted in SRMs to match those of marine sediment and tissue samples before microwave extraction. The results demonstrated that it is crucial to standardize the moisture content in all samples, including dry reference material to ensure good recovery of organic contaminants. MSE yielded equivalent or superior recoveries compared to conventional methods for the majority of the compounds evaluated. The advantages of MSE over conventional methods are reduced solvent usage, higher sample throughput and the elimination of halogenated solvent usage.     

Supercritical fluid extraction of polycyclic aromatic hydrocarbons from marine sediments and soil samples

Supercritical fluid extraction (SFE) was used to extract polycyclic aromatic hydrocarbons (PAH) from a certified sample of marine sediment. This sample contains a great number of organic pollutants that are present in low concentrations. The extractions were carried out at 50 and 80 degrees C, at a pressure varying from 230 to 600 bar and using CO2 in the supercritical phase and the effect of three organic modifiers (methanol, n-hexane and toluene), added at 5%/vol, at the same temperature and pressure conditions, were then considered. PAHs were characterized by GC-MS and the recover yield was estimated for 6 PAHs that were representative of those present in the sample, according to their molecular weight and to the number of condensed rings. The analytical conditions giving the best recovery efficiency were used on an unpolluted soil sample spiked with 11 PAHs of environmental importance at a concentration similar to that certified for the sediment sample. An increase in the yield of recovered PAHs, using methanol as co-solvent, was observed while higher temperatures caused a negative effect on the quantity of recovered pollutants. The recovery yield for PAHs from the spiked soil sample was measured and found to be greater than 90%. Better recoveries were obtained for those compounds with higher molecular weight.     

An alternative supercritical fluid extraction system for aqueous matrices and its application in pesticides residue analysis

Supercritical fluid extraction (SFE) is a rapid and convenient method for the isolation of organic compounds from environmental samples. This paper describes a supercritical carbon dioxide (CO2) extraction system that uses a newly designed extraction cell to recover organic compounds from an aqueous matrix. Analysis of the extracts by gas chromatography-electron capture detector (GC-ECD) indicated that the herbicide trifluralin (2,6-dinitro-N,N-dipropyl-4-trifluoromethylaniline) could be quantitatively extracted by using the SFE system proposed with small amounts of sample. The percentage of recovery obtained with the SFE system described was twice as high as the result obtained using a conventional solid-phase extraction technique. Extraction by SFE was completed in a short period of time using a simple and low-cost home-made system that did not require the use of organic solvents.     

Development of supercritical carbon dioxide extraction with a solid phase trap for dioxins in soils and sediments

A method involving supercritical fluid extraction (SFE) with a solid phase trap containing activated alumina was investigated for the rapid analysis of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin like polychlorinated biphenyls (DL-PCBs) in soils and sediments. The samples were extracted by using supercritical carbon dioxide with water (2% versus CO(2) flow velocity) being used as an entrainer at a pressure of 30 MPa and a temperature of 130 degrees C for 50 min. The extracts were adsorbed on an activated alumina trap that was maintained at a temperature of 150 degrees C, and then, PCDD/DFs and DL-PCBs were eluted with 20 ml of hexane at 60 degrees C. After concentration, they were measured with a high-resolution gas chromatograph interfaced to a high-resolution mass spectrometric detector. The average concentrations of PCDD/DFs and DL-PCBs corresponded to the results obtained by the conventional method, and the reproducibility of this SFE method was below 21% of the relative standard deviations for all samples. The total time required for the analysis of the pretreatment of this method was only 2 h.     

Comparison of supercritical fluid extraction and Soxhlet extraction for the determination of PCBs in seaweed samples

The efficiency of supercritical fluid extraction for the determination of 12 polychlorinated biphenyls from algae samples is compared to Soxhlet extraction. Analytical detection limits for the individual congeners ranged from 0.62 microgl(-1) to 19 microgl(-1). Recovery was tested for both methods using standard addition procedure. At maximum spike level of concentration, the mean recoveries were not significantly different (P>0.05) of all PCBs studied, with the exception of PCBs 28, 52, 77 and 169. Method precision for Soxhlet extraction (< or =3.9%) was slightly better than for SFE (< or =9.2%). Although both methods yield comparable results, SFE offers the advantage of detecting all PCBs studied at lower concentrations, reducing extraction time, and reducing the amount of solvents needed. The optimized methods were applied to the analysis of three real seaweed samples, except for PCB101 the concentrations of all PCBs were low or below the detection limits. The levels of PCB101 found in sample 1 were 6.6+/-0.54 ng g(-1) d.w., in sample 2 the levels were 8.2+/-0.86 ng g(-1) d.w. and in sample 3 they were 7.7+/-0.08 ng g(-1) d.w.     

Study of the distribution of the polychlorinated biphenyls in the milk fat globule by supercritical fluid extraction

The distribution of polychlorinated biphenyls (PCBs) in the milk fat globule has been studied by sequential extraction of four different lipidic fractions from powdered full-fat milk with supercritical carbon dioxide. Extractions were carried out in the dynamic mode in the pressure range 13.6-23.3 MPa at a temperature of 50 degrees C. The levels of PCBs and short-chain triglycerides (SCT), medium-chain triglycerides (MCT) and long-chain triglycerides (LCT), as well as the cholesterol in these four supercritical fluid extraction (SFE) fractions were determined. Extracts obtained at lower pressures were found to be enriched in PCBs, SCT, MCT and cholesterol, while the concentrations of all these analytes decreased for subsequent extractions. Satisfactory quadratic correlations were found between the PCB and SCT and MCT levels (r2 in the range 0.9-0.999), and between the PCB and cholesterol levels (r2 in the range 0.8-0.999, except for PCB 105) determined in the SFE fractions. These results suggested a similar distribution of the PCBs and the cholesterol in the milk fat globule. This conclusion was also supported by the comparison of the PCBs and the cholesterol chemical structures as well as by the total PCB levels determined by SFE to those obtained by using different extraction methods. The classical requirement for the analysis of this kind of lipophilic pollutants of an exhaustive extraction of the lipids of the matrix to ensure their quantitative recovery has been revised.     

Selective supercritical fluid extraction to identify aged sediment-bound PCBs available for uptake by eel

A naturally contaminated sediment was partially extracted with selective supercritical fluid extraction (SFE) to remove a fraction of supposedly bioavailable PCBs from the matrix. Eels (Anguilla anguilla) were cultured in systems with untreated and pre-extracted sediment, respectively, and it was shown that the SFE treatment selectively removed bioavailable PCBs from the sediment, since relative biota-to-sediment accumulation factors (BSAFs) for the eight studied PCB congeners were much lower in the pre-extracted than in the untreated system at the end of the study. Relative BSAF values decreased with about the same relative amount for all eight congeners, independent of the degree of chlorination and the initial concentration in the sediment. The results demonstrate the ability of SFE to selectively remove sediment-bound PCBs that are available for uptake by the eels, thus demonstrating the feasibility of using selective SFE to estimate bioavailability of PCBs in sediments.     

Effect of condensed organic matter on solvent extraction and aqueous leaching of polycyclic aromatic hydrocarbons in soils and sediments

The contents of nonhydrolyzable organic matter (NHC) and black carbon (BC) were measured in soils and sediments from the Pearl River Delta, South China. Polycyclic aromatic hydrocarbons (PAHs) were extracted respectively by Soxhlet and an accelerated solvent extraction device (ASE) using different solvents. In addition, sequential aqueous leaching at different temperatures was carried out. The PAH content extracted with the sequential three solvent ASE is two times higher than that using the Soxhlet extraction method. The relationship of the PAH content with the NHC content is very significant. The PAH concentrations measured at various temperature steps fit well to the Van't Hoff equation and the enthalpy was estimated. The investigation indicates that condensed organic matter such as kerogen carbon, aged organic matter, and BC is relevant for the extraction and distribution of native PAHs in the investigated field soils and sediments.     

Persistent organic pollutants in snow from European high mountain areas

Snow cores were collected in the catchment area of five remote mountain lakes in Europe. They were analysed for polycyclic aromatic hydrocarbons (PAH), polychlorinated biphenyls (PCB), and organochlorine pesticides, namely DDTs, hexachlorobenzene (HCB) and hexachlorocyclohexanes (HCH). PAH are found in higher amounts in the Tatra and Caledonian mountains, PCB are higher in the Alps and HCH are highest in the Alps and Pyrenees. The qualitative PAH distributions are dominated by low molecular weight compounds, phenanthrene being the most abundant PAH in all but in one site. These compounds also occur predominantly in the gas phase in the atmosphere. Their high abundance in the snowpack witness the occurrence of effective transfer mechanisms from gas to snow flakes. In Starolesnianske (Tatra mountains), a higher contribution of high molecular weight compounds is found. This site exhibits the highest snow PAH and suspended particulate levels. Transformation of the concentration values of these compounds into annual deposition rates and correction for catchment/lake area indicates that in Scandinavia and the Alps a large proportion of PAH incorporation is mediated by snowfallout whereas in the Tatra mountains snow deposition only accounts for a small fraction of the compounds stored in the lake sediments. Among organochlorine compounds, only PCB and HCH have been found above method detection limit in most of the samples. The PCB congener distributions changes significantly between sites, although a predominance of the less chlorinated congeners have generally been observed.     

Evaluation of sequentially-coupled POP fluxes estimated from simultaneous measurements in multiple compartments of an air-water-sediment system

Bulk atmospheric deposition fluxes, air-water exchange fluxes, particle settling fluxes out of the upper water column, sediment trap fluxes in deep waters, and sediment burial fluxes of polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) were simultaneously measured in the Koster Fjord, eastern Skagerak, on the Swedish west coast. The aim of the study was to compare the magnitude and direction of the compound fluxes in the system in order to diagnose key fate processes. The PCB and PAH fluxes via net atmospheric deposition, settling particles out of the surface and through deep waters, as well as into the accreting underlying sediments were shown to be remarkably similar, agreeing within a factor of a few for any given target compound. Fluxes of all PCB and PAH target compounds remained fairly constant with water column depth. Thus there was no evidence for net desorption from sinking particles. The net unidirectional and near balancing of vertical fluxes suggests a net transport of PCBs and PAHs from the atmosphere to the continental shelf sediments in the Koster Fjord, which is consistent with the hypothesis that the shelf sediments are important sinks for these compounds.     

Development of a simple selective SFE method for the determination of desorption behaviour of PCBs in two Swedish sediments

A simple selective supercritical fluid extraction (SFE) method was developed for the determination of desorption behaviour of PCBs in sediments. This method was applied to determine the distribution of individual PCB congeners among sites of differing bonding strengths in two Swedish sediments (Lake J?rnsj?n and Baltic bay Orserumsviken). Four different PCB fractions were distinguished in each sediment by applying consecutively harsher supercritical fluid extraction conditions on the same sample. Even though the two sediments had completely different textures, they showed very similar extraction behaviour. It was shown that, in both sediments, a major part of the PCBs (58% and 65%, respectively) were located at "fast sites", from which they were extractable already with the mildest extraction conditions (60 min, 40 degrees C and 120 bar). Only a small fraction of the PCBs were so tightly bound to the sediments (located at "slow sites"), that they could be extracted only under the harshest conditions (60 min, 150 degrees C and 400 bar). Information of this kind should be of great value for the determination of bioavailability of pollutants in sediments and soils, and it is the author's belief that this technique has the potential to develop into a powerful tool in environmental risk assessment.     

Characterization of polycyclic aromatic hydrocarbons (PAHs) on lime spray dryer (LSD) ash using different extraction methods

In this study, traditional Soxhlet, automatic Soxhlet and ultrasonic extraction techniques were employed to determine the speciation and concentration of polycyclic aromatic hydrocarbons (PAHs) on lime spray dryer (LSD) ash samples collected from the baghouse of a spreader stoker boiler. To test the efficiencies of different extraction methods, LSD ash samples were doped with a mixture of 16 US EPA specified PAHs to measure the matrix spike recoveries. The results showed that the spike recoveries of PAHs were different using these three extraction methods with dichloromethane (DCM) as the solvent. Traditional Soxhlet extraction achieved slightly higher recoveries than automatic Soxhlet and ultrasonic extraction. Different solvents including toluene, DCM:acetone (1:1 V/V) and hexane:acetone (1:1 V/V) were further examined to optimize the recovery using ultrasonic extraction. Toluene achieved the highest spike recoveries of PAHs at a spike level of 10 microg kg(-1). When the spike level was increased to 50 microg kg(-1), the spike recoveries of PAHs also correspondingly increased. Although the type and concentration of PAHs detected on LSD ash samples by different extraction methods varied, the concentration of each detected PAH was consistently low, at microg kg(-1) levels.     

Biogenic polycyclic aromatic hydrocarbons in sediments of the San Joaquin River in California (USA), and current paradigms on their formation

Biogenic perylene and higher plant pentacyclic triterpenoid-derived alkylated and partially aromatized tetra- and pentacyclic derivatives of chrysene (3,4,7-trimethyl- and 3,3,7-trimethyl-1,2,3,4-tetrahydrochrysene, THC) and picene (1,2,9-trimethyl- and 2,2,9-trimethyl-1,2,3,4-tetrahydropicene, THP) were two- to four-fold more abundant than pyrogenic PAH in two sediment cores from the San Joaquin River in Northern California (USA). In a core from Venice Cut (VC), located in the river, PAH concentrations varied little downcore and the whole-core PAH concentration (biogenics?+?pyrogenics) was 250.6?±?73.7 ng g^?1 dw; biogenic PAH constituted 67?±?4 % of total PAH. THC were 26?±?9 % of total biogenic PAH, THP were 36?±?7 %, and perylene was 38?±?7 %. PAH distributions in a core from Franks Tract (FT), a former wetland that was converted to an agricultural tract in the late 1800s and flooded in 1938, were more variable. Surface sediments were dominated by pyrogenic PAH so that biogenic PAH were only ~30 % of total PAH. Deeper in the core, biogenic PAH constituted 60–93 % of total PAH; THC, THP and perylene were 31?±?28 %, 24?±?32 %, and 45?±?36 % of biogenic PAH. At 100–103 cm depth, THP constituted 80 % of biogenic PAH and at 120–123 cm perylene was 95 % of biogenic PAH. Current concepts related to precursors and transformation processes responsible for the diagenetic generation of perylene and triterpenoid-derived PAH are discussed. Distributions of biogenic PAH in VC and FT sediments suggest that they may not form diagenetically within these sediments but rather might be delivered pre-formed from the river’s watershed.     

Selective supercritical fluid extraction as a tool for determining the PCB fraction accessible for uptake by chironomid larve in a limnic sediment

Selective supercritical fluid extraction (SFE) at 40 degrees C, 400 bar and 60 min was used to selectively remove bioavailable PCBs from a naturally contaminated limnic sediment. The extraction decreased the sediment concentrations of the nine studied PCBs by 54% (on average). Chironomid larvae were thereafter cultured in pre-extracted sediment as well as in untreated sediment to study the differences in uptake of PCBs in the two cultures. While the prevailing equilibrium partitioning (EqP) theory predicts a 54% decrease in PCB uptake by the chironomids in the pre-extracted sediment, with a maintained biota-to-sediment accumulation factor (BSAF), a decrease in PCB uptake by 91% was observed. For all investigated PCBs the BSAFs were on average 81% lower in the cultures with pre-extracted sediment than in the untreated systems. The data allowed for a calculation of the bioavailable fraction, which was estimated to 60%. This is very close to the 54% removed by selective SFE, demonstrating the possibility of using SFE as a tool to determine the bioavailable PCB fraction in a polluted sediment.     

A new alternative fuel for reduction of polycyclic aromatic hydrocarbon and particulate matter emissions from diesel engines

This study investigated the emissions of polycyclic aromatic hydrocarbons (PAHs), carcinogenic potential of PAH and particulate matter (PM), brake-specific fuel consumption (BSFC), and power from diesel engines under transient cycle testing of six test fuels: premium diesel fuel (PDF), B100 (100% palm biodiesel), B20 (20% palm biodiesel + 80% PDF), BP9505 (95% paraffinic fuel + 5% palm biodiesel), BP8020 (80% paraffinic fuel + 20% palm biodiesel), and BP100 (100% paraffinic fuel; Table 1). Experimental results indicated that B100, BP9505, BP8020, and BP100 were much safer when stored than PDF. However, we must use additives so that B100 and BP100 will not gel as quickly in a cold zone. Using B100, BP9505, and BP8020 instead of PDF reduced PM, THC, and CO emissions dramatically but increased CO2 slightly because of more complete combustion. The CO2-increased fraction of BP9505 was the lowest among test blends. Furthermore, using B100, B20, BP9505, and BP8020 as alternative fuels reduced total PAHs and total benzo[a]pyrene equivalent concentration (total BaPeq) emissions significantly. BP9505 had the lowest decreased fractions of power and torque and increased fraction of BSFC. These experimental results implied that BP9505 is feasible for traveling diesel vehicles. Moreover, paraffinic fuel will likely be a new alternative fuel in the future. Using BP9505 instead of PDF decreased PM (22.8%), THC (13.4%), CO (25.3%), total PAHs (88.9%), and total BaPeq (88.1%) emissions significantly.     

Bioavailability of PCBs from field-collected sediments: application of Tenax extraction and matrix-SPME techniques

Two chemical approaches, Tenax extraction and matrix solid phase microextraction (matrix-SPME), were evaluated for their potential to improve the prediction of bioavailability by equilibrium partitioning theory (EPT) across sediments with various characteristics. Biota-sediment accumulation factors (BSAFs) and body residues were quantified by exposing Lumbriculus variegatus to three PCB-contaminated field sediments. The concentration of PCBs in biota was positively correlated to the total PCB sediment concentration, the PCB concentration in the rapidly desorbing fraction estimated using Tenax extraction, and the PCB concentration on the SPME fibers. Results showed EPT was acceptable for estimating bioavailability from the tested sediments with sum PCB BSAFs of 1.18-2.47; however, it overestimated PCB bioavailability from sandy sediment. Both Tenax extraction and matrix-SPME, which take sequestration into account, reduced variability in prediction of PCB bioavailability across sediments, including the sandy sediment, and could be used as cost- and time-efficient alternatives for bioassay. Matrix-SPME was considered the better technique due to its ability to directly predict PCB body residues in the exposed biota and its potential use with in situ applications in the field.     

Characterization of Naturally-occurring and Anthropogenic PAHs in Urban Sediments-Wycoff/Eagle Harbor Superfund Site

Polycyclic aromatic hydrocarbons (PAH) are ubiquitous constituents in urban sedimentary environments. The accurate characterization of their source(s) in sediments influences decisions regarding the liability for clean-up and remedial options. In this study, an extensive PAH dataset that included 50 non-alkylated (parent) and alkylated PAH groups and isomers was acquired using a modified EPA Method 8270 for the study of 5 cm intervals from 10 sediment cores (28-78 cm) obtained from the Eagle Harbor Superfund Site on Bainbridge Island, Washington. Conventional hydrocarbon "fingerprinting" and the PAH profiles in the Pb 210 age-dated cores revealed three primary PAH sources to the sediments over the past 220 years, namely (1) naturally occurring background; (2) urban runoff, and (3) creosote, the latter resulting from prior operations at the former Wyckoff wood-processing facility located on the Harbor. Naturally occurring background PAH in the pre-industrial (<1900) sediments were dominated by perylene, 1,7-dimethylphenan-threne (derived from the oxidation of abietic acid resins), and pyrogenic PAH most likely derived from historic forest fires. The concentration of PAH total in these pre-industrial sediments was consistently less than 1 mg/kg (dry). Urban runoff in the post-industrial (>1930) sediments was dominated by low but consistent concentrations (10-20 mg/kg dry) of pyrogenic PAM derived primarily from the combustion of fossil fuel(s). The creosote-impacted sediments in the post-industrialized sediments contained high concentrations (1000-140,000 mg/kg dry) of pyrogenic PAH associated with distilled, coal-derived liquids.     

Bench-scale testing of selected remediation alternatives for contaminated sediments

The Assessment and Remediation of Contaminated Sediments (ARCS) Program within the U.S. Environmental Protection Agency's Great Lakes National Program Office (GLNPO) contained a component for demonstrating and evaluating sediment remediation technologies. Toward this end, bench-scale tests of solvent extraction, thermal desorption, and wet air oxidation technologies were conducted. Contaminated sediments were tested from the Grand Calumet River, Indiana; Buffalo River, New York; Saginaw River, Michigan; and Ashtabula River, Ohio. The primary contaminants of concern in these sediments were polychlorinated biphenyls (PCBs) and polynuclear aromatic hydrocarbons (PAHs). The solvent extraction tests were conducted with sediments from the Grand Calumet, Buffalo, and Saginaw rivers. The thermal desorption studies were conducted with sediments from the Grand Calumet, Buffalo, and Ashtabula rivers. The wet air oxidation testing was performed with the Grand Calumet River sediment. Raw sediment contaminant concentrations ranged from 0.32-21.9 mg/kg dry mass for PCBs and 2.70-266 mg/kg dry mass for PAHs. PCB removal or destruction efficiencies ranged from approximately 6-99%. PAH removal or destruction efficiencies ranged from 65-99%. Mass balance closures ranged from 40-99% for solids; 59-139% for water; 29-3500% for oil; 16-129% for PCBs; and 69-3170% for PAHs.     

Polycyclic aromatic hydrocarbons (PAHs) in the aerosol in Beijing, China, measured by aminopropylsilane chemically-bonded stationary-phase column chromatography and HPLC/fluorescence detection

We developed a useful analytical method for the determination of polycyclic aromatic hydrocarbons (PAH) concentrations in the aerosol of China. We used an accelerated solvent extraction (ASE) method for the extraction of PAHs from the aerosol samples, in order to reduce the extraction time and the solvent volume used. The optimum purification method was developed, with aminopropylsilane chemically-bonded stationary-phase column chromatography, in order to remove many co-extractives which cannot be removed by conventional purification methods using silica-gel column chromatography. HPLC/fluorescence detection (FLD) was adopted as the analytical method, because it has very high sensitivity to PAH and it is easy to install, operate, and maintain as compared with GC/MS. With the analytical method developed in this study, the recovery and precision (RSD) for most of the PAHs ranged from 75% to 129% and from 2.8% to 22.7%, respectively. The concentrations of PAHs in the aerosol samples collected from October 2003 to April 2005 in Beijing, China were determined using the newly developed method. SigmaPAHs, which is the sum of the concentrations of all detected PAHs, was 177.8 +/- 239.9 ng m(-3) (n = 64). The SigmaPAHs concentration in the heating season (305.1 +/- 279.0 ng m(-3), n = 33) was 7.2 times higher than that in the non-heating season (42.3 +/- 32.0 ng m(-3), n = 31). These strong seasonal variations in atmospheric PAH concentration are possibly due to coal combustion for residential heating in winter.