Sense or no-sense of the sum parameter for water soluble "adsorbable organic halogens" (AOX) and "absorbed organic halogens" (AOX-S18) for the assessment of organohalogens in sludges and sediments

"AOX" is the abbreviation of the sum parameter for water soluble "adsorbable organic halogens" in which 'A' stands for adsorbable, 'O' for organic and 'X' for the halogens chlorine, bromine and iodine.After the introduction of the AOX in 1976, this parameter has been correctly used for "real" AOX constituents (DDT and its metabolites, PCBs, etc.) but also misused for non-adsorbable adsorbed OX-compounds, mostly high molecular organohalogens in plants and even to inorganic compounds being neither organic nor adsorbable.The question of natural "Adsorbable Organic Halogens" (AOX) formed by living organisms and/or during natural abiogenic processes has been definitively solved by the known existence of already more than 3650 organohalogen compounds, amongst them the highly reactive, cancerogenic vinyl chloride (VC).The extension of the AOX to AOX-S18 for Sludges and Sediments, in which A stands for adsorbed (not for adsorbable) is questionable. It includes the most important water insoluble technical organochlorine product: polyvinyl chloride, PVC.In addition to organic halogens it also includes inorganic, mineralogenic halides, incorporated mainly in the crystal lattice of fine grained phyllosilicates, the typical clay minerals (kaolinite, montmorillonite, illite and chlorite) which are main constituents of sediments and sedimentary rocks representing the major part of the sedimentary cover of the earth.Other phyllosilicates, biotite and muscovite, major constituents of granites and many metamorphic rocks (gneiss and mica schist) will also contribute to the AOX-S18 especially in soils as result of weathering processes.Since chlorine is incorporated into the mineral structure and, as a consequence, not soluble by the nitric acid analytical step (pH 0.5) of the S18 determination, it will account to the AOX-S18 in the final charcoal combustion step at temperatures >950 degrees C.After heavy rainfalls sewage sludge composition is strongly influenced by mineralogenic components derived from the erosion of fine grained sediments or soils. Assuming 50% geogenic particles with a mean Cl concentration of 103 mg/kg (as in shales and clays) the mineralogenic Cl-content could add about 50 mg/kg to the organic AOX in sewage sludge.The occurrence of insoluble and non-adsorbable PVC in sewage sludge exhibits the same problems as the mineralogenic constituents: a detection as AOX-S18 is possible when the final high temperature analytical step is applied.Plants as major sources of organohalogens have never been doubted.Only recently [Science 295 (2002) 985] based on the determination of the form of Cl with near-edge X-ray adsorption fine structure (NEXAFS) spectroscopy and extended X-ray adsorption showed the variations in the inorganic Cl(-) and organo-Cl compounds with increasing humification of plant leaves from "fresh leaves--senescent leaves on plants--senescent leaves on soil--powdered top soil--isolated soil humus". His finding of exclusively inorganic Cl(-) in the starting material (fresh leaves) is controverse to our earlier results indicating the presence of ionic inorganic Cl together with water insoluble absorbed organohalogens (AOX-S18) in eight different macrophytes of both terrestrial and marine environments.Our research on AOX in interstitial water of anaerobic limnic sediments has led to the role of bromine playing in the diagenesis of the organic matter of sediments. In sediments of Lake Constance Br(-) concentrations in lake water at the sediment water interface increased from <0.01 to 0.25 mg/l in the pore water at 77 cm sediment depth.In the Neckar River a Br concentrations of 0.02 mg/l at the water/sediment interface increasing to 0.74 mg/l in pore water in 85 cm depth was found. Here a parallel development could be found with ammonium concentration and alkalinity. The very high positive correlation ammonium:bromide and bromide:alkalinity leads to the conclusion, that bromine, originally a high molecular constituent of the organic matter, is released as bromide during an early dehalogenation stage of diagenesis.The mlusion, that bromine, originally a high molecular constituent of the organic matter, is released as bromide during an early dehalogenation stage of diagenesis.The main general reason to discard the AOX sum parameter as a whole lies in the fact, that adsorbable halogenated substances cannot a priori be categorized as natural/anthropogenic, biotic/abiotic, harmful/harmless. If applied to sludges and sediments, adsorbed organohalogens are not water soluble and therefore not adsorbable, and mineralogenic halogens (X) are neither organic nor adsorbable, and therefore by definition no AOX.     

Fractionation of halogenated organic matter present in rain and snow

Organic matter in samples of rain and snow from Sweden, Poland, Germany and the Republic of Ireland was fractionated by employing a series of filtration, purging, evaporation and extraction steps. Determinations of the group parameter AOX (adsorbable organic halogens) in aqueous phases and EOX (extractable organic halogens) in organic phases showed that halogenated organic matter present in bulk precipitation is composed of several different groups of compounds. The largest amounts of organically bound halogens were found in fractions of relatively polar and non-volatile to semivolatile compounds. In particular, a significant part of the AOX could be attributed to alkaline-labile organic bases. Gas chromatographic analysis of different organic extracts in the chlorine channel of an atomic emission detector (AED) resulted in chromatograms with few distinct peaks, and analysis in the bromine channel did not produce any distinct peaks. Chlorinated acetic acids were the most abundant halogenated organic acids, and chlorinated alkyl phosphates were normally responsible for the largest peaks in the chlorine chromatogram of neutral, hexane-extractable compounds. When analysing volatiles, 1,4-dichlorobenzene and a thus far unidentified chloroorganic compound often caused the largest response in the chlorine channel of the AED system.     

Screening of organic halogens and identification of chlorinated benzoic acids in carbonaceous meteorites

The occurrence of halogenated organic compounds measured as a sum parameter and the evidence of chlorinated benzoic acids in four carbonaceous meteorites (Cold Bokkeveld, Murray, Murchison and Orgueil) from four independent fall events is reported. After AOX (Adsorbable organic halogen) and EOX (Extractable organic halogen) screening to quantify organically bound halogens, chlorinated organic compounds were analyzed by gas chromatography. AOX concentrations varying from 124 to 209 microg Cl/g d.w. were observed in carbonaceous meteorites. Ion chromatographic analysis of the distribution of organically bound halogens performed on the Cold Bokkeveld meteorite revealed that chlorinated and brominated organic compounds were extractable, up to 70%, whereas only trace amounts of organofluorines could be extracted. Chlorinated benzoic acids have been identified in carbonaceous meteorite extracts. Their presence and concentrations raise the question concerning the origin of halogenated, especially chlorinated, organic compounds in primitive planetary matter.     

Sources of adsorbable organic halogens (AOX) in sludge of Gaza

Average concentrations of adsorbable organic halogens (AOX) in sludge from the Gaza Strip reached 600 mg kg(-1) which currently represents a major limiting factor for sludge application in agriculture. This study aims to identify the main sources of AOX in Gaza where the area is small with limited industrial activities. The results showed that the AOX in effluent sludge is formed mainly inside the treatment plant. Although the plant receives AOX wastewater of only 85 microg l(-1), this value increased five fold inside the plant to an average of 400 microg l(-1) in the effluent wastewater. On the other hand, the sludge from the first sedimentation pond showed an AOX concentration of 213 mg kg(-1) and increased in the final sedimentation pond to 500 mg kg(-1). The AOX concentration in three month old sludge was 130 mg kg(-1). The textile and detergent industries are the major AOX producing industries in Gaza, with an average AOX of 40,000 microg l(-1) in their effluent wastewater. These values do not represent a significant AOX pollution load to the treatment plant because these industries are very limited and their effluents are diluted before entering the municipal treatment plant. Industrial activity decreased in 2006 to less than 70% of the previous four years. Consequently, the AOX in the industrial effluent decreased from 150,000 to 40,000 microg l(-1) over the same time period. Sludge from these industries showed 1300 mg kg(-1) AOX for the past four years and only 400 mg kg(-1) in 2006. Moreover, the AOX in the influent wastewater discharged to the treatment plant decreased from 320 to 85 microg l(-1) for the same period. This study revealed that the major AOX is formed inside the treatment plant and especially in the anaerobic facilities. There was no correlation between the AOX concentrations in the sludge and the wastewater at the same location. Moreover, there was no correlation between the AOX in sludge/wastewater and dissolved oxygen, pH and chloride in that treatment plant.     

可吸附有机卤化物的深度处理实验研究

可吸附有机卤化物（AOX）是人为污染的重要标志之一,北京高碑店污水处理厂二级出水中约90％的AOX为可吸附有机氧化物（AOCl),研究了自氧氧化,粒状活性炭吸附,粉末活性炭吸附3种深度处理工艺对二级出水中AOX的去除作用,臭氧的氧化反应最多可去除约38％的AOX,粒状活性炭床可运行3200床体积,吸附容量为0.14mgAOX/g GH-16型活性炭,投加木质粉末活性炭200mg/L及25mg/L的聚合氯化铝,能去除24．7％的AOX。     

Chloroperoxidase-mediated chlorination of aromatic groups in fulvic acid

The aim of the present study is to investigate whether exo-enzymatically mediated chlorination of fulvic acid (FA) results in the formation of chlorinated groups within the macromolecules which correspond to those which were previously detected in soil and surface water samples. The chlorination was carried out by exposing FA to a commercial chloroperoxidase (CPO) in the presence of chloride and hydrogen peroxide. The exposed FA was then chemically degraded using an oxidative technique and finally analysed for four different aromatic groups and their chlorinated analogues. The particular aromatic groups included were the methyl esters of 4-ethoxybenzoic acid, 3-methoxy-4-ethoxybenzoic acid, 3,4-diethoxybenzoic acid, and 3,5-dimethoxy-4-ethoxybenzoic acid, along with their mono- and dichlorinated analogues. Prior to the chemical degradation procedure, the FA was analysed for AOX (adsorbable organic halogens) and chlorinated acetic acids. The original FA contained 1.4 mg Cl(org) g(-1) and detectable amounts of two chlorinated aromatic groups. After exposure to the enzyme, the concentration of AOX increased to 44.3 mg Cl(org) g(-1) and detectable amounts of four chlorinated aromatic groups as well as di- and trichloroacetic acid were found.     

Occurrence and source of brominated organic compounds in surface waters

Monitoring of organic halogen compounds, measured as adsorbable organically bound bromine (AOBr), in an eutrophic lake, which is influenced by treated waste water, revealed repeatedly high concentrations of organobromine compounds in late summer, whereas five times lower values were measured during the rest of the year. It was possible to reproduce the in situ observed AOBr increase in the laboratory. Batch experiments were performed with lake water from two different lakes and an algae culture. It could be shown that the AOBr production is not limited to strong waste water influenced lakes. Furthermore, the AOBr formation requires light and the presence of algae, and thus is most probably biotic in nature. A low content of nutrients favours the formation of organic bromine compounds. To our knowledge this is the first report about the seasonally occurrence of naturally produced organic bromine compounds in lakes/surface waters.     

Disinfection by-products in Finnish drinking waters

Disinfection by-products (DBPs) were measured in plant effluents of 35 Finnish waterworks, which utilized different treatment processes and raw water sources. DBPs were measured also from the distribution systems of three waterworks. Di- and trichloroacetic acids, and chloroform were the major DBPs found in treated water samples. The concentration of six haloacetic acids (HAA6) exceeded the concentrations of trihalomethanes (THMs). Chlorinated drinking waters (DWs) originating from surface waters contained the highest concentration of HAA6 and THMs: 108 and 26 microg/l, respectively. The lowest concentrations of DBPs were measured from ozonated and/or activated carbon filtrated and chloraminated DWs. Higher concentrations of HAA6, THMs, and adsorbable organic halogens were measured in summer compared to winter. The levels of chlorinated acetic acids, chloroform, and bromodichloromethane correlated positively with mutagenicity. Past mutagenicity levels of DWs were examined. A major reduction in the use of prechlorination, increased use of chloramine disinfection, and better removal of organic carbon were the most important reasons for the 69% decrease in mutagenicity from 1985 to 1994.     

Formation of chlorinated disinfection by-products in viticulture

Background, aim and scope  The use of sodium hypochlorite (HYP) in viticulture results in effluents which are contaminated with halogenated substances. These disinfection by-products (DBPs) can be quantified as group parameter ‘adsorbable organic halogens’ (AOX) and have not been determined in effluents of viticulture yet. The substances that are detected as AOX are unknown. The AOX can be composed of harmless substances, but even toxic contaminants. Thus, it is impossible to assess ecological impacts. The aim of this study is to determine the quantification of AOX and DBPs after the use of HYP. This will be helpful to reduce environmental pollution by AOX. Materials and methods  The potential of HYP to generate AOX was determined in laboratory-scale experiments. Different model solutions were treated with HYP according to disinfection processes in viticulture and conditions of AOX formation in effluents were simulated. AOX were quantified using the flask-shaking method and identified DBPs were investigated by gas chromatography–mass spectrometry. Results  Treatment with HYP resulted in the formation of AOX. The percentage conversion of HYP to AOX was up to 11%. Most important identified DBPs in viticulture are chloroform, dichloroacetic acid and trichloroacetaldehyde. In addition, the formation of carbon tetrachloride (CT), 1,1,1-trichloropropanone, 2,4-dichlorobenzoic acid and 2-chloro-/2,4-dichlorophenylacetic acid was investigated. It was demonstrated that reaction temperature, concentration of HYP and type of organic matter have important influence on the formation of chlorinated DBPs. Discussion  The percentage conversion of HYP to AOX was similar to other published studies. Although a correlation of single compounds and AOX is difficult, chloroform was the predominant AOX. Generation of the volatile chloroform should be avoided due to possible adverse effects. The generation of dichloroacetic acid is of minor importance on account of biodegradation. Trichloroacetaldehyde and 1,1,1-trichloropropanone are weak mutagens and their formation should be avoided. Conclusions  The generation of AOX and chlorinated DBPs can be minimised by reducing the concentrations of the organic materials in the effluents. The removal of organic matter before disinfection results in a decreased formation of AOX. HYP is an effective disinfectant; therefore, it should be used at low temperatures and concentrations to reduce the amount of AOX. If possible, disinfection should be accomplished by the use of no chlorine-containing agents. By this means, negative influences of HYP on the quality of wine can also be avoided. Recommendations and perspectives  Our results indicate that HYP has a high potential to form AOX in effluents of viticulture. The predominant by-products are chloroform, dichloroacetic acid and trichloroacetaldehyde. In further research, wastewaters from a winery and the in- and outflows of two sewage treatment plants were sampled during vintage and analysed. These results will be discussed in a following paper.     

Organically bound halogens in coniferous forest soil -Distribution pattern and evidence of in situ production

We examined organically bound halogens in a coniferous soil profile and in Norway spruce litter enclosed in litter bags and subjected to degradation in field. Throughout the soil profile the total amount of organically bound halogens (TOX, μg Cl/g soil) was related to organic matter, i.e. amounts decreased with increasing depth. In contrast, the organic chlorine to organic carbon ratio (mg Cl_org:g C_org) increased with increasing depth, and a pronounced increase in this ratio was observed in the transition between the O-horizon and the A-horizon, strongly indicating that in situ production of organically bound halogens occur in soil. This conclusion was strengtened by the results of the litter bag study, which clearly showed that a net-production of organically bound halogens occurred during decomposition of the spruce needle litter. Furthermore, this part of the study showed that organically bound halogens are not a static factor of organic matter. On the contrary, the results strongly indicated that during decomposition of organic matter, organically bound halogens are subjected to both production, i.e. incorporation of inorganic halides into organic matter, and mineralisation, i.e. release of inorganic halides from organic matter. A method previously developed in our laboratory to determine TOX in soil was further evaluated; there were no indications that inorganic halides interfere with the determination.     

Epilithic Lichen—Atmospheric Deposition Monitors of Trace Elements and Organohalogens?

ABSTRACT

Epilithic lichen (Xanthoria elegans in Canada, Lecanora muralis in Germany) were gathered from 17 locations in Ontario, Canada (from Lake Ontario to James Bay) and 43 locations in Germany (from the Alps to the North Sea and from the Baltic Sea to the Erzgebirge). Sample aliquots were digested in nitric acid and trace elements were analyzed by inductively coupled plasma-mass spectrom-etry techniques. The organohalogens were determined as absorbable organic halogens (AOXs) by coulometry. Concentration ranges from Germany for trace element samples and AOXs were determined. The lichen showed high spatial resolution in their element enrichment patterns. This allowed for differentiation between natural and anthropogenic dominance in ambient air concentrations. This biomonitoring method has proven to be very sensitive, fast, and reliable. No clear relationship could be found between trace element and AOX concentrations. The AOX values may reflect individual metabolic rates of the fungal partner in lichen symbionts.     

Effects of operating parameters on advanced oxidation of diuron by the Fenton's reagent: a statistical design approach

Advanced oxidation of diuron in aqueous solution by Fenton's reagent using FeSO(4) as source of Fe(II) was investigated in the absence of light. Effects of operating parameters namely the concentrations of pesticide (diuron), H(2)O(2) and Fe(II) on oxidation of diuron was investigated by using Box-Behnken statistical experiment design and the surface response analysis. Diuron oxidation by the Fenton reagent was evaluated by determining the total organic carbon (TOC), diuron, and adsorbable organic halogen (AOX) removals. Concentration ranges of the reagents resulting in the highest level of diuron oxidation were determined. Diuron removal increased with increasing H(2)O(2) and Fe(II) concentrations up to a certain level. Diuron concentration had a more profound effect than H(2)O(2) and Fe(II) in removal of diuron, TOC and AOX from the aqueous solution. Nearly complete (98.5%) disappearance of diuron was achieved after 15min reaction period. However, only 58% of diuron was mineralized after 240min under optimal operating conditions indicating formation of some intermediate products. Optimal H(2)O(2)/Fe(II)/diuron ratio resulting in the maximum diuron removal (98.5%) was found to be 302/38/20 (mgl(-1)).     

Sediment accumulation of organic halogens in pristine forest lakes

Sediment accumulation of organic halogen was studied in two forest lakes, one pristine and one which received 30 m³ of biologically purified bleaching wastewater from a kraft pulp mill in 1979 equivalent to ca. 2 kg of adsorbable organic halogen (AOX). Lake sediments were dated with²¹⁰Pb,¹³⁴Cs and¹³⁷Cs and the annual deposition rates of organic halogens and organic matter were calculated. Organic bound halogen contents of the sediment aged 150 years was 180 μg Cl g^?1 d.w. in both lakes. The concentration of organic bound halogen at the topmost 6 cm of the sediments (less than 20-years-old) ranged from 45 to 80 μg Cl g^?1 d.w. This suggests that solvent extractable halogen had enriched in the older sediment layers. The deposition of extractable organic halogen (EOX) in the lakes in 1950’s was 4 to 5 mg Cl m^?2 a^?1. Since then, the depositon of EOX doubled in both lakes. The deposition of organic matter increased concomitantly from 50 g m^?2 a^?1 to 110 g m^?2 a^?1 in Lake Mustalampi and from 35 g m^?2 a^?1 to 62 g m^?2 a^?1 in Lake Pyylampi suggesting that the increase in the deposition of organic halogen followed the increase in the deposition of organic matter. Of the 2 kg of organic halogen discharged into the lake, 5% or less was detected in the sediment in tetrahydrofuran extractable form 15 years later.     

Chemical and Biological Characterization of Products of Incomplete Combustion from the Simulated Field Burning of Agricultural Plastic

Chemical and biological analyses were performed to characterize products of Incomplete combustion emitted during the simulated open field burning of agricultural plastic. A small utility shed equipped with an air delivery system was used to simulate pile burning and forced-air-curtain incineration of a nonhalogenated agricultural plastic that reportedly consisted of polyethylene and carbon black. Emissions were analyzed for combustion gases; volatile, semi-volatile, and particulate organics; and toxic and mutagenlc properties. Emission samples, as well as samples of the used (possibly pesticide-contaminated) plastic, were analyzed for the presence of several pesticides to which the plastic may have been exposed. Although a variety of alkanes, alkenes, and aromatic and polycyclic aromatic hydrocarbon (PAH) compounds were identified in the volatile, seml-volatlle, and particulate fractions of these emissions, a substantial fraction of higher molecular weight organic material was not identified. No pesticides were Identified in either combustion emission samples or dlchloromethane washes of the used plastic. When mutagenlcity was evaluated by exposing Salmonella bacteria (Ames assay) to whole vapor and vapor/partlculate emissions, no toxic or mutagenlc effects were observed. However, organic extracts of the particulate samples were moderately mutagenlc. This mutagenlcity compares approximately to that measured from residential wood heating on a revertant per unit heat release basis. Compared to pile burning, forced air slightly decreased the time necessary to burn a charge of plastic. There was not a substantial difference, however, in the variety or concentrations of organic compounds Identified In samples from these two burn conditions. This study highlights the benefits of a combined chemical/biological approach to the characterization of complex, multi-component combustion emissions. These results may not reflect those of other types of plastic that may be used for agricultural purposes, especially those containing halogens.     

Identification of relevant micropollutants in Austrian municipal wastewater and their behaviour during wastewater treatment

The European Union has defined environmental quality standards (EQSs) for surface waters for priority substances and several other pollutants. Furthermore national EQSs for several chemicals are valid in Austria. The study investigated the occurrence of these compounds in municipal wastewater treatment plant (WWTP) effluents. In a first screening of 15 WWTPs relevant substances were identified, which subsequently were monitored in 9 WWTPs over 1 year (every 2 months). Out of 77 substances or groups of substances (including more than 90 substances) 13 were identified as potentially relevant in respect to water pollution and subjected to the monitoring, whereas most other compounds were detected in concentrations far below the respective EQS for surface waters and therefore not further considered. The preselected 13 compounds for monitoring were cadmium (Cd), nickel (Ni), copper (Cu), selenium (Se), zinc (Zn), diuron, polybrominated diphenyl ethers (PBDEs), di(ethyl-hydroxyl)phthalate (DEHP), tributyltin compounds (TBT), nonylphenoles (NP), adsorbable organic halogens (AOX) and the complexing agents ethylenediaminetetraacetic acid (EDTA) as well as nitrilotriacetic acid (NTA). In the effluents of WWTPs the concentrations of the priority substances Cd, NP, TBT and diuron frequently exceeded the respective EQS, whereas the concentrations for DEHP and Ni were below the respective EQS. The effluent concentrations for AOX, EDTA, NTA, Cu, Se and Zn frequently are in the range or above the Austrian EQS for surface waters. Besides diuron and EDTA all compounds are removed at least partially during wastewater treatment and for most substances the removal via the excess sludge is the major removal pathway. For the 13 compounds which were monitored in WWTP effluents population equivalent specific discharges were calculated. Since for many compounds no or only few information is available, these population equivalent specific discharges can be used to assess emissions from municipal WWTPs to surface waters as well as to make a first assessment of the impact of a discharge on surface waters chemical status. Comparing discharges and river pollution on a load basis, the influence of diffuse sources becomes obvious and therefore should also be taken into consideration in river management.     

Wood smoke as a source of particle-phase organic compounds in residential areas

The objective of this study was to investigate the organic composition of wood smoke emissions and ambient air samples in order to determine the wood smoke contribution to the ambient air pollution in the residential areas. From November 2005 to March 2006 particle-phase PM₁₀ samples were collected in the residential town Dettenhausen surrounded by forests near Stuttgart in southern Germany. Samples collected on pre-baked glass fibre filters were extracted using toluene with ultrasonic bath and analysed by gas chromatography mass spectrometry (GC-MS). 21 polycyclic aromatic hydrocarbons (PAH) including 16 USEPA priority pollutants, different organic wood smoke tracers, primarily 21 species of syringol and guaiacol derivatives, levoglucosan and its isomers mannosan, galactosan and dehydroabietic acid were detected and quantified in this study. The concentrations of these compounds were compared with the fingerprints of emissions from hardwood and softwood combustion carried out in test facilities at Universitaet Stuttgart and field investigations at a wood stove during real operation in Dettenhausen. It was observed that the combustion derived PAH was detected in higher concentrations than other PAH in the ambient air PM₁₀ samples. Syringol and its derivatives were found in large amounts in hardwood burning but were not detected in softwood burning emissions. On the other hand, guaiacol and its derivatives were found in both softwood and hardwood burning emissions, but the concentrations were higher in the softwood smoke compared to hardwood smoke. So, these compounds can be used as typical tracer compounds for the different types of wood burning emissions. In ambient air samples both syringol and guaiacol derivatives were found which indicates the wood combustion contribution to the PM load in such residential areas. Levoglucosan was detected in high concentrations in all ambient PM₁₀ samples. A source apportionment modelling, Positive Matrix Factorization (PMF) was implemented to quantify the wood smoke contribution to the ambient PM₁₀ bound organic compounds in the residential area.     

Determination of total organic halogen (TOX) in humic acids after microwave-induced combustion

Chemically chlorinated organic matter as well as natural background humic acids contain significant amounts of organically bound halogens that must be determined for assessment of environmental pollution. In this work the use of ion chromatography (IC) and inductively coupled plasma mass spectrometry (ICP-MS) is proposed for the determination of total organic Cl, Br and I concentration in humic acids extracted from various forest soil horizons after a single digestion by microwave-induced combustion (MIC). Samples were pressed as pellets and combusted using 20 bar of oxygen and ammonium nitrate solution as igniter. Analytes were absorbed in diluted alkaline solution (50 mM (NH₄)₂CO₃) and a reflux step was applied after combustion to improve analyte recoveries (5 min, microwave power of 1400 W). The accuracy was evaluated using certified reference materials (CRM) and spiked samples. Using MIC the agreement with CRM values and spike recoveries was higher than 97% for all analytes. As an advantage over conventional procedures, using MIC it was possible to digest up to eight samples in only 25 min, obtaining a single solution suitable for all halogens determination in humic acids samples by different techniques (IC and ICP-MS). The limit of detection (3σ) for Cl, Br and I obtained by IC was 1.2, 2.5 and 4.3 μg g⁻¹ and by ICP-MS it was 1.4, 0.03 and 0.002 μg g⁻¹, respectively.     

Application of headspace analysis and AOX-measurement to leachate from hazardous waste landfills

The applicability of headspace analysis for the quantitation of volatile organic compounds in leachates from hazardous waste landfills is investigated with respect to standard stability, leachate stability and reproducibility. Between the corresponding data sets, deviations at about 10 % are observed. Besides the analysis of the volatile leachate components, the sum parameters POX and AOX are determined for the leachate samples. From the POX-data, good agreements with the total organic chlorine determined by headspace analysis are received. For determination of AOX, two different methods are applied to the leachates and discussed with respect to the high concentrations of POX determined in all leachate samples.     

Effects of bleached kraft mill effluents on the swimming activity of Monoporeia affinis (crustacea, amphipoda) lindström

The crustacean Monoporeia affinis Lindström was exposed to two different concentrations of bleached kraft mill effluent (BKME) containing, originally, 8.3 mg/g organic chlorine determined as adsorbable organic halogen (AOX). The swimming activity of the animals was recorded by pairs of infra-red sensitive photocells attached to 5.6 1 aquaria having a seawater inflow rate of 12 ml/min. The test sequence included a control phase, an exposure phase and a recovery phase. During the exposure phase the total swimming activity decreased in three of the four test aquaria containing effluent, indicating that the animals had retreated into the sediment. Total activity increased during the recovery phase and, in the case of the lower organic chlorine concentration, activity almost achieved the original control-phase level. Statistical differences in swimming activity changes during experiment were evaluated using ANOVA. Experimental methods are explained in detail.     

Determination of total organic chlorine and bromine in water samples by adsorption onto activated carbon and neutron activation analysis

A method was developed for the analysis of total organic chlorine and bromine compounds (TOCl, TOBr) in water samples. The method is based on the adsorption of organic compounds on specially prepared activated carbon. Neutron activation analysis (neutron flux 4·10¹² n cm⁻² s⁻¹) was used for the quantitative determination of chlorine and bromine.The factors investigated were the adsorption of organic chlorine and bromine compounds on activated carbon, the effect of pH on the adsorption, the removal of chlorine ions from activated carbon by nitrate washing, the amount of activated carbon required, the adsorption time, the potential number of successive adsorptions and the preservation of samples.The detection limits for TOC1 and TOBr were 5 and 0.5 μg 1⁻¹, respectively, when the sample size was 100 ml.