Partitioning of naphthalene to gemini surfactant-treated alumina

Partitioning of naphthalene to anionic surfactants adsorbed on alumina in the aqueous phase was studied for immobilization of the contaminant in the subsurface. Three anionic surfactants with different molecular structures were used: a conventional (sodium dodecylbenzene sulfonate, SDDBS), a gemini (dialkylated disulfonated diphenyl oxide with alkyl chain length of 12, DADS-C12), and a dianionic (monoalkylated disulfonated diphenyl oxide with alkyl chain length of 12, MADS-C12). Sorption of the surfactants onto alumina was studied in a series of batch experiments and the effectiveness of the adsorbed surfactants onto aluminum oxide as a sorptive phase for naphthalene was compared.     

Sorption and reduction of tetrachloroethylene with zero valent iron and amphiphilic molecules

Effects of surfactants and natural organic matter (NOM) on the sorption and reduction of tetrachloroethylene (PCE) with zero valent iron (ZVI) were examined in this study. PCE reduction by ZVI depended on the ionic type of the surfactants. The removal of PCE and production of TCE with non-ionic Triton X-100 and cationic hexadecyltrimethyl-ammonium (HDTMA) at one-half and two times the critical micelle concentration (CMC) were 1.2-1.8 times higher than without surfactants because of the enhanced PCE partitioning and surface concentration by the sorbed surfactants. When anionic sodium dodecyl benzene sulfonate (SDDBS) at one-half and two times CMC and NOM at 20 mg l(-1) and 50 mg l(-1) concentrations were used, the removal of PCE doubled and TCE production decreased. In the presence of SDDBS, TCE production by ZVI was lower than with HDTMA and Triton X-100 while PCE removal was higher than with the other surfactants.     

Influence of the presence of heavy metals and surface-active compounds on the sorption of bisphenol A to sediment

The effects of different heavy metals (Cd, Pb), cationic surfactants cetyltrimethylammonium bromide (CTAB), anionic surfactant sodium dodecylbenzenesulfonate (SDBS) and the chemistry of the solution (pH and ionic strength) on the sorption of bisphenol A (BPA) to sediment were studied. Results showed that the presence of Cd and Pb caused a significant increase on the sorption of BPA to sediment and the sorption isotherms were in good agreement with Freundlich equation. The effect of surfactants on the adsorption of BPA onto sediment was found to strongly depend on the type of the surfactants. The presence of CTAB promoted BPA sorption and the amount of BPA adsorbed onto sediment increased linearly with concentration of CTAB. In contrast, the presence of anionic surfactant (SDBS) caused a slight reduction on the sorption of BPA. It was also found that the sorption behavior of BPA was affected by solution pH and ionic strength. The larger amount of BPA was absorbed with higher ionic strength and lower pH. This study may provide important insights into the understanding of the transport and fate of BPA in the environment.     

Solubilization of PAH mixtures by three different anionic surfactants

Solubilization of naphthalene and phenanthrene into the micelles formed by three different anionic surfactants was investigated for single, binary, and ternary mixtures including pyrene. The three surfactants were sodium dodecylbenzene sulfonate (SDDBS), monoalkylated disulfonated diphenyl oxide (MADS-C12), and dialkylated disulfonated diphenyl oxide (DADS-C12). The order of increasing solubility enhancement of naphthalene and phenanthrene was SDDBS < MADS-C12 < < DADS-C12, which indicates that the hydrophobic chains in micellar core play more important role for the solubilization of polycyclic aromatic hydrocarbons (PAHs) than the benzene rings in palisade layer of a micelle. The solubility enhancement of naphthalene was slightly changed in PAH mixtures. The solubility of phenanthrene was greatly enhanced in presence of naphthalene but reduced in presence of pyrene. The explanation for these results could be that less hydrophobic compounds can be solubilized at the interfacial region of a hydrophobic core, which reduces the interfacial tension between the core and water, and then the reduced interfacial tension can support a larger core volume for the same interfacial energy.     

Influence of metal ion on sorption of p-nitrophenol onto sediment in the presence of cetylpyridinium chloride

Heavy metals and surfactants have a significant effect on the sorption of organic contaminants. In this study, batch equilibrium experiments were carried out to investigate the influence of Pb(NO(3))(2) on the sorption of p-nitrophenol (PNP) onto sediments in the presence of cationic surfactant cetylpyridinium chloride (CPC). Results indicated that in the complex system containing PNP, Pb(NO(3))(2) and CPC, the sorption of PNP decreased with increasing concentration of Pb(NO(3))(2) due primarily to competing for adsorption sites. Likewise, partitioning of PNP in adsorbed surfactant layers and micelles decreased with increasing level of Pb(NO(3))(2). Moreover, the influence of different metal ions (Pb(2+), Cd(2+), Zn(2+)) was examined and results indicated that the presence of heavy metals inhibited the sorption of PNP in the order: Pb(2+)>Cd(2+)>Zn(2+). The competitive effect of the heavy metals was in agreement with the hydration energy and hydrated radius. The results are believed to provide a useful insight into describing the transport and fate of PNP in natural environments.     

Alcohol ethoxylate mixtures in marine sediment: Competition for adsorption sites affects the sorption behaviour of individual homologues

Mineral surfaces form the main sorption phase for alcohol ethoxylates (AEs) in marine sediment. Competition for adsorption sites is investigated for marine sediment and kaolinite clay using simple mixtures of AE homologues. For both sorbents, adsorption sites on mineral surfaces can be effectively blocked by an AE homologue with the strongest adsorption affinity. The strongly adsorbed AE, however, forms a second sorption phase to which weakly adsorbing AE will sorb, forming bilayers. An extended dual-mode model accounts for competition effects, while still based on sorption properties of individual compounds. Competition effects become apparent when total adsorbed concentrations reach ∼10% of the adsorption capacity. Deviations from individual sorption isotherms depend on affinity constants and dissolved homologue composition. Competition will not often occur in contaminated field sediments, with AEs concentrations usually far below the adsorption capacity, but will affect sorption studies, sediment toxicity tests or applications with nonionic surfactant mixtures.     

Efficiency of surfactant-enhanced desorption for contaminated soils depending on the component characteristics of soil-surfactant--PAHs system

The sorption of surfactants onto soils has a significant effect on the performance of surfactant enhanced desorption. In this study, the efficiency of surfactants in enhancing desorption for polycyclic aromatic hydrocarbons (PAHs) contaminated soils relative to water was evaluated with a term of relative efficiency coefficient (REC). Since the sorption of surfactants onto soils, surfactants only enhanced PAH desorption when REC values were larger than 1 and the added surfactant concentration was greater than the corresponding critical enhance desorption concentration (CEDC), which was defined as the corresponding surfactant concentration with REC=1. A model was utilized to describe and predict the REC and CEDC values for PAH desorption. The model and experimental results indicated that the efficiency of surfactants in enhancing PAH desorption showed strong dependence on the soil composition, surfactant structure and PAH properties. These results are of practical interest for the selection of surfactant to optimize soil remediation technologies.     

Oil spill cleanup using graphene

In this article, we study the use of thermally reduced graphene (TRG) for oil spill cleanup. TRG was synthesized by thermal exfoliation of graphite oxide and characterized by X-ray diffusion, Raman spectroscopy, SEM, TEM, elemental analysis, and Brunauer–Emmett–Teller (BET) surface area measurement. Various aspects of the sorption process have been studied including the sorption capacity, the recovery of the adsorbed oil, and the recyclability of TRG. Our results shows that TRG has a higher sorption capacity than any other carbon-based sorbents, with sorption capacity as high as 131 g of oil per gram TRG. With recovery of the sorbed oil via filtration and reuse of TRG for up to six cycles, 1 g of TRG collectively removes approximately 300 g of crude oil. Moreover, the effects of TRG bulk density, pore volume, and carbon/oxygen ratio and the oil viscosity on the sorption process are also discussed.     

Preparations of organobentonite using nonionic surfactants

Due to hydrophilic environment at its surface, natural bentonite is an ineffective sorbent for nonpolar nonionic organic compounds in water even though it has high surface area. The surface properties of natural bentonite can be greatly modified by simple ion-exchange reactions with large organic cations (cationic surfactants) and this organobentonite is highly effective in removing nonionic organic compounds from water. Cationic surfactant derived organobentonites have been investigated extensively for a wide variety of environmental applications. In this study, the preparation of organobentonite using nonionic surfactants has been investigated for the first time. Results indicate that nonionic surfactants intercalates into the interlamellar space of bentonite and may demonstrate higher sorption capacity than cationic surfactant. It is possible to create large interlayer spacing and high organic carbon content organobentonite by use of nonionic surfactants with suitable balance between the hydrocarbon and ethylene oxide chain lengths. In addition, nonionic surfactant derived organobentonites are more chemically stable than cationic surfactant derived organobentonites.     

阴-阳离子有机膨润土吸附水中苊的性能及机理研究

用溴化十二烷基三甲铵（DTMAB）、十二烷基硫酸钠（SDS）、十二烷基苯磺酸钠（SDBS）按不同配比制得一系列阴一阳离子有机膨润土,研究了有机膨润土吸附水中苊的性能及机理。结果表明,阴一阳离子有机膨润土对水中苊的吸附去除能力大于单阳离子有机膨润土,且与改性时所用阴离子表面活性剂的种类、浓度有关;阴一阳离子有机膨润土对苊的吸附等温线呈线性,吸附机理主要是分配作用。     

Effect of cationic and anionic surfactants on the sorption and desorption of perfluorooctane sulfonate (PFOS) on natural sediments

Sorption and desorption of PFOS at water-sediment interfaces were investigated in the presence of a cationic surfactant, cetyltrimethylammonium bromide (CTAB), and an anionic surfactant, sodium dodecylbenzene sulfonate (SDBS). CTAB remarkably enhanced the sorption of PFOS on the sediment. In contrast, the influence of SDBS to the sorption of PFOS was concentration dependent. Two contrasting factors were responsible for the phenomenon. One was the sorption of the surfactant itself to the sediment, which enhanced the sorption of PFOS. The other was the increase in solubility of PFOS caused by the adding of surfactants, which decreased the sorption of PFOS. SDBS had a much lower sorption capacity, but rather strong ability to increase the solubility of PFOS. High levels of SDBS remarkably reduced the sorption of PFOS on the sediment. These results imply that cationic and anionic surfactants may have contrast impacts on the distribution and transport of PFOS in the environment.     

Influence of surfactant sorption on the removal of phenanthrene from contaminated soils

Laboratory column flushing experiments were conducted to remove phenanthrene from contaminated soils by Triton X-100 (TX100) with an aim to investigating the effect of surfactant sorption on the performance of surfactant-enhanced remediation process. The effluent concentration of phenanthrene from soil columns showed strong dependence on the sorption breakthrough curves of TX100. The removal of phenanthrene from contaminated soils was enhanced only when the sorption breakthrough of TX100 occurred and the influent concentration of TX100 was greater than the critical enhanced flushing concentration (CEFC). The sorption of surfactant onto soils and the subsequent partitioning of contaminants into soil-sorbed surfactant had a significant effect on the solute equilibrium distribution coefficient (KD) and thus the flushing efficiency for phenanthrene. A model was developed to predict KD and CEFC values for simulating the performance of surfactant-enhanced flushing for contaminated soils. These results are of practical interest in developing effective and safe surfactant-enhanced remediation technologies.     

Triton X-100在土壤颗粒上的吸附特征研究

采用平衡振荡法,研究了砂土对非离子表面活性剂Triton X-100的吸附特征。结果表明,砂颗粒对Triton X-100的吸附能力总体较低,单位吸附含量均＜1.1 mg/g;砂颗粒吸附Triton X-100过程中存在显著的吸附剂浓度效应,砂颗粒上Triton X-100含量随着固液比（吸附剂浓度）的增大而减小;吸附容量q_m与平衡常数K_L值随固液比变化而变化,Langmuir方程适用范围是起始浓度C₀相对较小的固液吸附体系;0.5～1 mm石英砂的吸附能力略＞0.2～0.5 mm石英砂,0.5～1 mm和0.2～0.5 mm石英砂吸附Triton X-100变化特征具有显著的一致性,采用高斯拟合模型可以反映出石英砂吸附Triton X-100的变化规律,相关系数R²均＞0.98。     

Effects of SOM, surfactant and pH on the sorption-desorption and mobility of prometryne in soils

Sorption and desorption of the herbicide prometryne in two types of soil subjected to the changes of pH and soil organic matter and surfactant were investigated. The sorption and desorption isotherms were expressed by the Freundlich equation. Freundlich K_f and n values indicate that soil organic matter was the major factor affecting prometryne behavior in the test soils. We also quantified the prometryne sorption and desorption behavior in soils, which arose from the application of Triton X-100 (TX100), a nonionic surfactant and change in pH. Application of TX100 led to a general decrease in prometryne sorption to the soils and an increase in desorption from the soils when applied in dosages of the critical micella concentration (CMC) 0.5, 1 and 2. At the concentration below the CMC, the non-ionic surfactant showed a tendency to decrease prometryne sorption and desorption. It appeared that TX100 dosages above CMC were required to effectively mobilize prometryne. Results indicate that the maximum prometryne sorption and minimum prometryne desorption in soils were achieved when the solution pH was near its pK_a. Finally, the influence of TX100 on the mobility of prometryne in soils using soil thin-layer chromatography was examined.     

Phenanthrene partitioning in sediment–surfactant–fresh/saline water systems

The objective of this study was to investigate the influence of salinity on the effectiveness of surfactants in the remediation of sediments contaminated with phenanthrene (PHE). This is an example of a more general application of surfactants in removing hydrophobic organic compounds (HOCs) from contaminated soil/sediment in saline environments via in-situ enhanced sorption or ex-situ soil washing. Salinity effects on surfactant micelle formation and PHE partitioning into solution surfactant micelles and sorbed surfactant were investigated. The critical micelle concentration of surfactants decreased, and PHE partition between surfactant micelles and water increased with increasing salinity. Carbon-normalized partition coefficients (K_ss) of PHE onto the sorbed cationic surfactant increased significantly with increasing salinity, which illustrates a more pronounced immobilization of PHE by cationic surfactant in a saline system. Reduction of PHE sorption by anionic surfactant was more pronounced in the saline system, indicating that the anionic surfactant has a higher soil washing effectiveness in saline systems.     

Studies on the sorption and desorption characteristics of Zn(II) on the surface soils of nuclear power plant sites in India using a radiotracer technique

Zinc adsorption was studied in the soils of three nuclear power plant sites of India. 65Zn was used as a radiotracer to study the sorption characteristics of Zn(II). The sorption of zinc was determined at 25 and 45 degrees C at pH 7.8+/-0.2 in the solution of 0.01 M Ca(NO3)2 as supporting electrolyte. The sorption data was tested both in Freundlich and Langmuir isotherms and could be described satisfactorily. The effect of organic matter and other physico-chemical properties on the uptake of zinc was also studied in all the soil samples. The results showed that the cation exchange capacity, organic matter, pH and clay content were the main contributors to zinc sorption in these soils. The adsorption maximum was found to be higher in the soil on Kakarpara Atomic Power Plant sites soils having high organic matter and clay content. The zinc supply parameters of the soils are also discussed. In the desorption studies, the sequential extraction of the adsorbed zinc from soils showed that the diethylene triamine penta acetic acid extracted maximum amount of adsorbed zinc than CaCl2 and Mg(NO3)2. The zinc sorption on the soil and amount of zinc retention after extractants desorption shows a positively correlation with vermiculite and smectite mineral content present in the clay fraction of the soil. The amount desorbed by strong base (NaOH) and demineralised water was almost negligible from soils of all the sites, whereas the desorption by strong acid (HNO3) was 75-96% of the adsorbed zinc.     

Sorption of non-ionic surfactants to soil: the role of soil mineral composition

In this study, the importance of individual soil mineral constituents on non-ionic surfactant sorption is evaluated by employing scanning electron microscopy (SEM) equipped with energy-dispersive X-ray analysis (EDAX) to observe microchemical surface composition of model soil colloids and relate surface microchemical composition to the sorption behavior of a non-ionic surfactant, Polyethylene Glyco Mono-p-nonylphenyl Ether (A9PE10), on selected model soil colloids. This information is critical to understanding the fate and transport of this class of contaminants in subsurface. Results obtained from this study indicate that a correlation between the atomic ratio of Si:(Al + Fe) on soil mineral surface and A9PE10 sorption capacity exist, where those soil with larger value of Si:(Al + Fe) ratio exhibit higher sorption capacity. This allows us to predict that the non-ionic surfactant sorption capacity for soil decrease with progressively increasing states of soil maturity.     

Enhancement of phosphorus sorption onto light expanded clay aggregates by means of aluminum and iron oxide coatings

Phosphorus (P) loading from non-point or point sources increases the eutrophication risk of natural waters. The functioning of constructed wetlands (CWs) used as natural water treatment systems can be improved by means of additional materials adsorbing soluble P. In this study, light expanded clay aggregates (LECA) and LECA coated with aluminum (Al) oxide (Al-LECA) or iron (Fe) oxide (Fe-LECA) were tested for their efficiency as P sorbents in the pH range 3–8. The oxide coatings duplicated the actual sorption capacity calculated from the sorption isotherms at the P concentration in the equilibrium solution of 20 μg L⁻¹, assumed to be the allowable P level in purified water. In the oxide-coated LECAs the sorption was fast and followed both the first- and second-order Lagergren kinetic models, suggesting that the formation of a binuclear surface complex was feasible. In LECA, sorption was markedly slower and followed the first-order kinetic model, indicating that retention occurred through a monodentate attachment. These findings were in harmony with the degree of P saturation (DPS) of the sorbent surfaces at the highest P addition level (200 μg L⁻¹), DPS being decisively higher for LECA than for the oxide-coated sorbents. Accordingly, at higher pH values the competition by hydroxyl ions diminished the sorption in LECA relatively more than that in the coated sorbents. In agreement with the acidity of Al³⁺ being 100 times lower than that of Fe³⁺, at elevated pH the sorption by Al-LECA proved to be less reversible than that by Fe-LECA. The results provide evidence that in CWs Al-coated sorbents are superior to Fe-coated ones that are also redox-sensitive and may lose their sorption properties in anoxic conditions.     

Cosorption of organic chemicals with different properties: their shared and different sorption sites

Complementary sorption of different chemicals was expected and investigating the relationship between the sorption inhibition of primary sorbate (ΔQ(pri)) and sorption of secondary sorbate (Q(sec)) could provide a new angle to understand coadsorption of different chemicals. This study used bisphenol A (BPA) as the primary adsorbate, sulfamethoxazole (SMX) as the competitor, and carbon nanotubes as model adsorbents to study their complementary and competitive adsorption. At low BPA concentrations, the sorption of SMX (Q(sec)) exceeded BPA sorption inhibition (ΔQ(pri)), indicating that these two chemicals complementarily adsorbed on their respectively preferred sorption sites. At high BPA concentrations, higher ΔQ(pri) was observed in comparison to Q(sec), which may be resulted from different packing efficiencies of the adsorbed SMX and BPA. This study emphasized that both competitive and complementary sorption should be discussed in binary sorption system.