Recycling-oriented characterization of plastic frames and printed circuit boards from mobile phones by electronic and chemical imaging

This study characterizes the composition of plastic frames and printed circuit boards from end-of-life mobile phones. This knowledge may help define an optimal processing strategy for using these items as potential raw materials. Correct handling of such a waste is essential for its further “sustainable” recovery, especially to maximize the extraction of base, rare and precious metals, minimizing the environmental impact of the entire process chain. A combination of electronic and chemical imaging techniques was thus examined, applied and critically evaluated in order to optimize the processing, through the identification and the topological assessment of the materials of interest and their quantitative distribution. To reach this goal, end-of-life mobile phone derived wastes have been systematically characterized adopting both “traditional” (e.g. scanning electronic microscopy combined with microanalysis and Raman spectroscopy) and innovative (e.g. hyperspectral imaging in short wave infrared field) techniques, with reference to frames and printed circuit boards. Results showed as the combination of both the approaches (i.e. traditional and classical) could dramatically improve recycling strategies set up, as well as final products recovery.     

Recycling and reuse of industrial wastes in Taiwan

Eighteen million metric tons of industrial wastes are produced every year in Taiwan. In order to properly handle the industrial wastes, the Taiwan Environmental Protection Administration (Taiwan EPA) has set up strategic programs that include establishment of storage, treatment, and final disposal systems, establishment of a management center for industrial wastes, and promotion of recycling and reuse of industrial wastes. The Taiwan EPA has been actively promoting the recycling and reuse of industrial wastes over the years. In July 1995 the Taiwan EPA amended and promulgated the Criteria for the Industrial Waste Storage, Collection and Processing Facility, July, 1995 that added articles related to general industrial waste recycling and reuse. In June 1996 the Taiwan EPA promulgated the Non-listed General Industrial Waste Reuse Application Procedures, June, 1996, followed by the Regulations Governing the Permitting of Hazardous Industrial Waste Reuse, June 1996, setting up a full regulatory framework for governing industrial waste reuse. To broaden the recycling and reuse of general industrial wastes, the Taiwan EPA has listed 14 industrial waste items for recycling and reuse, including waste paper, waste iron, coal ash, tempered high furnace bricks (cinder), high furnace bricks (cinder), furnace transfer bricks (cinder), sweetening dregs, wood (whole/part), glass (whole/part), bleaching earth, ceramics (pottery, brick, tile and cast sand), individual metal scraps (copper, zinc, aluminum and tin), distillery grain (dregs) and plastics. As of June 1999, 99 applications for reuse of industrial wastes had been approved with 1.97 million metric tons of industrial wastes being reused.     

Technical specifications for mechanical recycling of agricultural plastic waste

Technical specifications appropriate for the recycling of agricultural plastic wastes (APWs), widely accepted by the recycling industry were developed. The specifications establish quality standards to be met by the agricultural plastics producers, users and the agricultural plastic waste management chain. They constitute the base for the best economical and environmental valorisation of the APW.The analysis of the APW streams conducted across Europe in the framework of the European project “LabelAgriWaste” revealed the inherent characteristics of the APW streams and the inherent constraints (technical or economical) of the APW. The APW stream properties related to its recycling potential and measured during pilot trials are presented and a subsequent universally accepted simplified and expanded list of APW recycling technical specifications is proposed and justified. The list includes two sets of specifications, applied to two different quality categories of recyclable APW: one for pellet production process (“Quality I”) and another one for plastic profile production process (“Quality II”). Parameters that are taken into consideration in the specifications include the APW physical characteristics, contamination, composition and degradation. The proposed specifications are focused on polyethylene based APW that represents the vast majority of the APW stream. However, the specifications can be adjusted to cover also APW of different materials (e.g. PP or PVC) that are found in very small quantities in protected cultivations in Europe. The adoption of the proposed specifications could transform this waste stream into a labelled commodity traded freely in the market and will constitute the base for the best economical and environmental valorisation of the APW.     

Effect of informal recycling on waste collection and transportation: the case of Chiclayo city in Peru

This paper analyses the evolution of national solid waste policy in Peru and the increasing relevance of informal recycling. Despite this rise in relevance, source separation and incorporation of informal recyclers within municipal plans is still slow, and collection of mixed waste is being considered. Waste collection and transportation costs represent the main share in municipal budgets and this research calculates cost reductions as a result of informal recycling and waste picking. The city of Chiclayo in Peru is presented as a case study. The paper finds that so far, waste picking has resulted in a reduction of two collection rounds but not a reduction in the number of vehicles collecting waste. Looking to the future, recovery of the remaining materials will not have an effect on collection rounds and number of vehicles. The research concludes that synergy between municipal systems and informal recycling can be maximized if new operational conditions are implemented. It introduces the concepts of “critical work shift,” which is the time of the day when the system requires maximum quantity of resources (i.e. vehicle-hours), and “sensitivity to variations in waste amounts,” and proposes strategies to promote recycling based on these new operational concepts.     

Material flow analysis of used personal computers in Japan

Most personal computers (PCs) are discarded by consumers after the data files have been moved to a new PC. Therefore, a used PC collection scheme should be created that does not depend on the distribution route of new PCs. In Japan, manufacturers’ voluntary take-back recycling schemes were established in 2001 (for business PCs) and 2003 (for household PCs). At the same time, the export of used PCs from Japan increased, affecting the domestic PC reuse market. These regulatory and economic conditions would have changed the flow of used PCs.In this paper, we developed a method of minimizing the errors in estimating the material flow of used PCs. The method’s features include utilization of both input and output flow data and elimination of subjective estimation as much as possible. Flow rate data from existing surveys were used for estimating the flow of used PCs in Japan for fiscal years (FY) 2000, 2001, and 2004. The results show that 3.92 million and 4.88 million used PCs were discarded in FY 2000 and 2001, respectively. Approximately two-thirds of the discarded PCs were disposed of or recycled within the country, one-fourth was reused within the country, and 8% were exported. In FY 2004, 7.47 million used PCs were discarded. The ratio of domestic disposal and recycling decreased to 37% in FY 2004, whereas the domestic reuse and export ratios increased to 37% and 26%, respectively. Flows from businesses to retailers in FY 2004 increased dramatically, which led to increased domestic reuse. An increase in the flow of used PCs from lease and rental companies to secondhand shops has led to increased exports. Results of interviews with members of PC reuse companies were and trade statistics were used to verify the results of our estimation of domestic reuse and export of used PCs.     

Sustainable design for automotive products: Dismantling and recycling of end-of-life vehicles

The growth in automotive production has increased the number of end-of-life vehicles (ELVs) annually. The traditional approach ELV processing involves dismantling, shredding, and landfill disposal. The “3R” (i.e., reduce, reuse, and recycle) principle has been increasingly employed in processing ELVs, particularly ELV parts, to promote sustainable development. The first step in processing ELVs is dismantling. However, certain parts of the vehicle are difficult to disassemble and use in practice. The extended producer responsibility policy requires carmakers to contribute in the processing of scrap cars either for their own developmental needs or for social responsibility. The design for dismantling approach can be an effective solution to the existing difficulties in dismantling ELVs. This approach can also provide guidelines in the design of automotive products. This paper illustrates the difficulty of handling polymers in dashboards. The physical properties of polymers prevent easy separation and recycling by using mechanical methods. Thus, dealers have to rely on chemical methods such as pyrolysis. Therefore, car designers should use a single material to benefit dealers. The use of materials for effective end-of-life processing without sacrificing the original performance requirements of the vehicle should be explored.     

Modelling agronomic properties of Technosols constructed with urban wastes

The greening of urban and suburban areas requires large amounts of arable earth that is a non-renewable resource. However, concentration of population in cities leads to the production of high amounts of wastes and by-products that are nowadays partly recycled as a resource and quite systematically exported out of urban areas. To preserve natural soil resources, a strategy of waste recycling as fertile substitutes is proposed. Eleven wastes are selected for their environmental harmlessness and their contrasted physico-chemical properties for their potential use in pedological engineering. The aim is (i) to demonstrate the feasibility of the formulation of fertile substrates exclusively with wastes and (ii) to model their physico-chemical properties following various types, number and proportions of constitutive wastes. Twenty-five binary and ternary combinations are tested at different ratios for total carbon, Olsen available phosphorus, cation exchange capacity, water pH, water retention capacity and bulk density. Dose–response curves describe the variation of physico-chemical properties of mixtures depending on the type and ratio of selected wastes. If these mixtures mainly mimic natural soils, some of them present more extreme urban soil features, especially for pH and P_Olsen. The fertility of the new substrates is modelled by multilinear regressions for the main soil properties.     

报废汽车非金属材料资源化利用研究

随着大量汽车进入报废期,如何对报废汽车进行资源化再利用成为人们面临的重要课题.报废汽车上的非金属材料,由于种类多、组成复杂,资源化再利用的难度较大,大多被废弃,会造成资源浪费、环境污染等一系列问题.塑料、橡胶、玻璃是汽车中主要的非金属材料,这些物质的资源化利用,对改善环境、节约资源,具有极大的社会经济效益.着重对报废汽...     

The development and prospects of the end-of-life vehicle recycling system in Taiwan

Automobiles usually contain toxic substances, such as lubricants, acid solutions and coolants. Therefore, inappropriate handling of end-of-life vehicles (ELVs) will result in environmental pollution. ELV parts, which include metallic and non-metallic substances, are increasingly gaining recycling value due to the recent global shortage of raw materials. Hence, the establishment of a proper recycling system for ELVs will not only reduce the impact on the environment during the recycling process, but it will also facilitate the effective reuse of recycled resources. Prior to 1994, the recycling of ELVs in Taiwan was performed by related operators in the industry. Since the publishing of the “End-of-life vehicle recycling guidelines” under the authority of the Waste Disposal Act by the Environmental Protection Administration (EPA) in 1994, the recycling of ELVs in Taiwan has gradually become systematic. Subsequently, the Recycling Fund Management Board (RFMB) of the EPA was established in 1998 to collect a Collection–Disposal–Treatment Fee (recycling fee) from responsible enterprises for recycling and related tasks. Since then, the recycling channels, processing equipment, and techniques for ELVs in Taiwan have gradually become established. This paper reviews the establishment of the ELV recycling system, analyzes the current system and its performance, and provides some recommendations for future development. The reduction of auto shredder residue (ASR) is a key factor in maximizing the resource recovery rate and recycling efficiency. The RFMB needs to provide strong economic incentives to further increase the recycling rate and to encourage the automobile industry to design and market greener cars.     

The future course of solid waste management in the U.S.

It is postulated that the current “garbage crisis” is due to a shortage of disposal capacity, not to burgeoning amounts of municipal solid waste (MSW). In support of this, trends in the quantity and composition of MSW, methods of waste reduction, recycling and growth of waste-to-energy capacity are examined to gain insight as to the future course of MSW management in the U.S. over about the next 15 plus years. This is the likely time to install new disposal capacity if pending legislative proposals are passed, that would enable states that provide their own disposal to ban wastes from other states.A new term, the “intensity of waste generation”, is proposed and illustrated, analogous to the intensity of mineral usage. The intensity is decreasing, implying that it is unlikely that waste generation will grow at rates projected by extrapolation or simple macroeconomic assumptions. Some other conclusions are: per capita MSW generation was nearly statistically constant from 1970 to 1984; the content of most forms of packaging in MSW are decreasing; packaging decreases the amount of food residues in MSW; and proposed national recycling targets of about 25% or more are not likely to be achieved, in part because of changes in the composition of MSW. Coupled with likely shortages of labor to process separated waste, it is forecast that there will be some future time when people will not think source separation is worth the bother and recycling will decrease. The future growth of waste-to-energy capacity is projected by assuming that a city will install capacity when others have done so, which leads to a simple quantitative model. The likely effects of impending landfill and incineration regulations are addressed.     

A flexible environmental reuse/recycle policy based on economic strength

Environmental policies based on fixed recycling rates may lead to increased environmental impacts (e.g., landfilled wastes) during economic expansion. A rate policy is proposed, which is adjusted according to the overall strength or weakness of the economy, as reflected by overall packaging demand and consumption, production and imports-exports. During economic expansion featuring rising consumption, production or exports, the proposed flexible policy suggests a higher reuse/recycle rate. During economic slowdown a lower rate results in lower impacts. The flexible target rates are determined in terms of annual data, including consumption, imports-exports and production. Higher environmental gains can be achieved at lower cost if the flexible policy is applied to widely consumed packaging products and materials associated with low rates, or if cleaner recycling technology is adopted.     

Review of environmental aspects and waste management of stone cutting and fabrication industries

Iran is the second largest stockholder of construction stones with 10 % of world production ;and there are more than 4000 stone cutting and fabrication industries (SCFIs). In the processing of raw stones, a considerable part of stone is turned into waste. Generated wastes include excess parts of different stones and sludge. The present paper reviews the state of SCFIs waste management using multiple data sources including site, analysis of effluent and sludge samples, and conducting interviews with people who are involved in 286 SCFIs in Qom and Tabriz. The results revealed that currently almost 35 to 52.5 % of raw stones were converted to solid wastes depending on stone cutting and processing methods, type of stones and their quality, which seemed a high percentage. Also, the effluents between 0.8 and 2.8 m³ were generated per ton of processed stone. Based on the analysis of heavy metals with atomic absorption spectroscopy, sludge samples contained a considerable amount of Pb, Cu, Cr, and Cd. It was also found that the lack of specific recycling, reuse and disposal programs and suitable supervision has led to uncontrolled disposal of stone wastes and sludge in different areas. However, there are good opportunities for reuse and recycling of the SCFIs wastes.     

WEEE flow and mitigating measures in China

The research presented in this paper shows that Waste Electrical and Electronic Equipment (WEEE) issues associated with home appliances, such as TV sets, refrigerators, washing machines, air conditioners, and personal computers, are linked in the WEEE flow and recycling systems and are important to matters of public policy and regulation. In this paper, the sources and generation of WEEE in China are identified, and WEEE volumes are calculated. The results show that recycling capacity must increase if the rising quantity of domestic WEEE is to be handled properly. Simultaneously, suitable WEEE treatment will generate large volumes of secondary resources. Environmental problems caused by the existing recycling processes have been investigated in a case study. Problems mainly stem from open burning of plastic-metal parts and from precious metals leaching techniques that utilize acids. The existing WEEE flow at the national level was investigated and described. It became obvious that a considerable amount of obsolete items are stored in homes and offices and have not yet entered the recycling system. The reuse of used appliances has become a high priority for WEEE collectors and dealers because reuse generates higher economic profits than simple material recovery. The results of a cost analysis of WEEE flow shows that management and collection costs significantly influence current WEEE management. Heated discussions are ongoing in political and administrative bodies as to whether extended producer responsibilities policies are promoting WEEE recycling and management. This paper also discusses future challenges and strategies for WEEE management in China.     

废聚丙烯塑料的回收利用技术

介绍了废聚丙烯塑料能源化的方法(焚烧、无氧及有氧条件下的热分解)与资源化回收利用技术(简单再利用、改性再生利用),并对国内外相关方面的研究和应用情况进行了报道。     

Environmental fads and fallacies

Recycling, believed by many to be accomplished by separate collection or central separation, only increases the cost of waste management until someone buys the junk.Reuse with refundable deposits removes valuable items from the waste stream at the earliest possible point and directly rewards the person who does the work.Biodegradable plastics increase greenhouse gases in comparison to conventional plastics if deposited in a landfill. Biofuels have a very minor effect on greenhouse gases because they represent only a few years retention of carbon, in contrast to fossil fuels which have been stored for millions of years.Composting is not recycling, but the destruction of one-half of the energy value of wastes with the production of a humus similar to, but not as good as, that produced in all good soils. As NPK fertilizer, compost is seldom worth the energy necessary to spread it although it has many special uses to improve poor soils.A large number of the perceived risks from e.g. PVC, dioxins, incineration, furnace ash, waste fuel oil, etc. are derived from assumptions that have been unsupported or refuted by later studies, but which remain strongly entrenched in the public mind.Since it is not possible to set a practical scientific definition of hazardous wastes, legal definitions are established. Some of these limits are influenced by active lobbying of interested commercial parties and may bear little relation to environmental or health risks.Competition between environmental authorities to set the lowest limits for toxic emissions has led to scientifically absurd and destructively expensive legal limits on “popular” pollutants. The result is a greater exposure to other hazards that must be neglected due to lack of funds.     

Technology tradeoffs related to advanced mission waste processing

Manned missions to the Moon and Mars will produce waste, both in liquid and solid form, from the day-to-day life-support functions of the mission—even considering a “closed” physico-chemical life support approach. An “open” life support system configuration, even one reliant on in situ resources, would result in even more waste being produced. The solution for short term missions appears to be either to store these wastes on-site or to convert them to useful products needed by other systems such as methane, water and gases which could be used for propulsion. The solution for longer term missions appears to be to incorporate their use within the life support system itself by making them a part of a closed ecological life-support system where nearly all materials are recycled.This paper discusses briefly the extent and impact of the life-support system waste production problem for a lunar base for different life support system configurations, including the impact of using in situ resources to meet life support requirements. It then discusses in more detail trade-offs among six of the currently funded physico-chemical waste processing technologies being considered for use in space.     

Potential of chicken by-products as sources of useful biological resources

By-products from different animal sources are currently being utilised for beneficial purposes. Chicken processing plants all over the world generate large amount of solid by-products in form of heads, legs, bones, viscera and feather. These wastes are often processed into livestock feed, fertilizers and pet foods or totally discarded. Inappropriate disposal of these wastes causes environmental pollution, diseases and loss of useful biological resources like protein, enzymes and lipids. Utilisation methods that make use of these biological components for producing value added products rather than the direct use of the actual waste material might be another viable option for dealing with these wastes. This line of thought has consequently led to researches on these wastes as sources of protein hydrolysates, enzymes and polyunsaturated fatty acids. Due to the multi-applications of protein hydrolysates in various branches of science and industry, and the large body of literature reporting the conversion of animal wastes to hydrolysates, a large section of this review was devoted to this subject. Thus, this review reports the known functional and bioactive properties of hydrolysates derived from chicken by-products as well their utilisation as source of peptone in microbiological media. Methods of producing these hydrolysates including their microbiological safety are discussed. Based on the few references available in the literature, the potential of some chicken by-product as sources of proteases and polyunsaturated fatty acids are pointed out along with some other future applications.     

Managing transfrontier hazardous waste transport forms

The present study evaluates the implementation of the EC Directive concerning transfrontier movements of hazardous wastes. Two of the identified bottlenecks, i.e. “the surplus of forms” and “too long delay in returning forms,” were studied in greater detail. A comparison of the forms used in the international waste transport in Europe showed a redundancy of information in comparison with the EC form. This indicates substantial cost savings when the existing forms are replaced by a “single administrative document”, for which the EC form can serve as an example.     

Scenario of solid waste reuse in Khulna city of Bangladesh

The reuse and recycling of waste materials are now sincerely considered to be an integral part of solid waste management in many parts of the world. In this context, a vast number of options ranging from small scale decentralized to larger scale centralized plants have been adopted. This study aimed at investigating the waste reuse schemes in Khulna city located in the southern part of Bangladesh and ranked third largest city in the country. The shops for reusable material (SRM) were mostly situated around railway, waterway, and truck station markets which provided easy transportation to further locations. For the reuses of waste materials and products, a chain system was found to collect reusable wastes under a total number of 310 identified SRM with 859 persons directly or indirectly involved in the scheme. This was a decentralized waste management system with self sufficient (autonomous) management. According to mass balance, about 38.52 tons d^?1 solid wastes were reused in Khulna city area, accounting for 7.65% of the total generated wastes. This study revealed that apparently a silent, systematic, smooth, and clean reuse chain has been established in Khulna city area under private initiatives, whose sustainability was confirmed over the years in the country without any official or formal funds. However, proper adjustment between the higher and lower chain in the materials flow path, as well as personal hygiene training for the workers, would further improve the achievements of the established reuse scheme.     

Cross-cultural comparison of concrete recycling decision-making and implementation in construction industry

Waste management is pressing very hard with alarming signals in construction industry. Concrete waste constituents major proportions of construction and demolition waste of 81% in Australia. To minimize concrete waste generated from construction activities, recycling concrete waste is one of the best methods to conserve the environment. This paper investigates concrete recycling implementation in construction. Japan is a leading country in recycling concrete waste, which has been implementing 98% recycling and using it for structural concrete applications. Hong Kong is developing concrete recycling programs for high-grade applications. Australia is making relatively slow progress in implementing concrete recycling in construction. Therefore, empirical studies in Australia, Hong Kong, and Japan were selected in this paper. A questionnaire survey and structured interviews were conducted. Power spectrum was used for analysis. It was found that “increasing overall business competitiveness and strategic business opportunities” was considered as the major benefit for concrete recycling from Hong Kong and Japanese respondents, while “rising concrete recycling awareness such as selecting suitable resources, techniques and training and compliance with regulations” was considered as the major benefit from Australian respondents. However, “lack of clients’ support”, “increase in management cost” and “increase in documentation workload, such as working documents, procedures and tools” were the major difficulties encountered from Australian, Hong Kong, and Japanese respondents, respectively. To improve the existing implementation, “inclusion of concrete recycling evaluation in tender appraisal” and “defining clear legal evaluation of concrete recycling” were major recommendations for Australian and Hong Kong, and Japanese respondents, respectively.