A comparison of two techniques for studying sediment desorption kinetics of hydrophobic pollutants

A comparison of two techniques (gaseous purge and vial desorption) for studying the kinetics of desorption of hydrophobic pollutants from natural sediments was conducted using identical, pre-equilibrated pollutant-sediment suspensions. Desorption profiles for the two techniques [for Lindane, Aldrin, 2,2'-dichlorobiphenyl (2,2'-DCB), 4,4'-dichlorobiphenyl (4,4'-DCB), and 2,2',6,6'-tetrachlorobiphenyl (TCB)] were then compared, based on the distribution of pollutant mass between the labile (fast) and non-labile (slow) desorption phases and the release rate constants for each phase of release. The vial desorption technique shows many practical advantages over the gaseous purge technique, including its more realistic mixing conditions, the use of an independent sample for each data point (as opposed to a calculation of a cumulative mass purged at each time point), the fact that the vials constitute a closed system and are therefore less subject to ambient contamination, and the relatively low demands of time and money for the vial technique. No consistent trends in labile rate constants or in pollutant distribution between the labile and non-labile phase were observed between the two techniques. A comparison of kinetic parameters shows much faster non-labile rate constants for the gaseous purge technique, attributed to the violent, continuous agitation employed, which likely disrupted sediment aggregates and oxidized the natural organic matter associated with the sediment. Non-labile rate constants have implications for the long-term fate of compounds adsorbed to repetitively disturbed sediments. This study suggests that the traditionally less popular vial desorption technique may yield more realistic non-labile desorption rate constants.     

Desorption kinetics for selected PCB congeners from river sediments

Desorption of PCBs from sediment can significantly affect the ultimate fate and effects of PCBs in aquatic systems. Using a gas purging technique to strip soluble and sorbed polychlorinated biphenyls (PCBs) from solutions and sediment suspensions, Henry's law constants, approach to equilibrium, and desorption rate constants for four PCB congeners were measured. Henry's law constants were on the order of 10⁻⁴ m³ atm mole⁻¹. Desorption rate constants measured for a predominantly kaolinitic, low-organic carbon sediment were on the order of 0.03–0.1 days⁻¹. In contrast, desorption rate constants measured for a sediment composed of montmorillonite with a 3% organic carbon content were on the order of 0.009–0.04 days⁻¹. Desorption data suggest that equilibration times for PCBs with low chlorine content are on the order of six weeks, and months to years for PCBs with a significantly higher chlorine content.     

Volatilization of contaminants from suspended sediment in a water column during dredging

Remedial dredging of contaminated bed sediments in rivers and lakes results in the suspension of sediment solids in the water column, which can potentially be a source for evaporation of hydrophobic organic compounds (HOCs) associated with the sediment solids. Laboratory experiments were conducted in an oscillating grid chamber to simulate the suspension of contaminated sediments and flux to air from the surface of the water column. A contaminated field sediment from Indiana Harbor Canal (IHC) and a laboratory-inoculated University Lake (UL) sediment, Baton Rouge, LA, were used in the experiments, where water and solids concentration and particle size distribution were measured in addition to contaminant fluxes to air. A transient model that takes into account contaminant desorption from sediment to water and evaporation from the water column was used to simulate water and sediment concentrations and air fluxes from the solids suspension. In experiments with both sediments, the total suspended solids (TSS) concentration and the average particle diameter of the suspended solids decreased with time. As expected, the evaporative losses were higher for compounds with higher vapor pressure and lower hydrophobicity. For the laboratory-inoculated sediment (UL), the water concentrations and air fluxes were high initially and decreased steadily implying that contaminant release to the water column from the suspended solids was rapid, followed by evaporative decay. For the field sediments (IHC), the fluxes and water concentrations increased initially and subsequently decreased steadily. This implied that the initial desorption to water was slow and that perhaps the presence of oil and grease and aging influenced the contaminant release. Comparison of the model and experimental data suggested that a realistic determination of the TSS concentration that can be input into the model was the most critical parameter for predicting air emission rates.     

Selective supercritical fluid extraction to identify aged sediment-bound PCBs available for uptake by eel

A naturally contaminated sediment was partially extracted with selective supercritical fluid extraction (SFE) to remove a fraction of supposedly bioavailable PCBs from the matrix. Eels (Anguilla anguilla) were cultured in systems with untreated and pre-extracted sediment, respectively, and it was shown that the SFE treatment selectively removed bioavailable PCBs from the sediment, since relative biota-to-sediment accumulation factors (BSAFs) for the eight studied PCB congeners were much lower in the pre-extracted than in the untreated system at the end of the study. Relative BSAF values decreased with about the same relative amount for all eight congeners, independent of the degree of chlorination and the initial concentration in the sediment. The results demonstrate the ability of SFE to selectively remove sediment-bound PCBs that are available for uptake by the eels, thus demonstrating the feasibility of using selective SFE to estimate bioavailability of PCBs in sediments.     

Study of transportation and distribution of PCBs using an ecologically simulated growth chamber

This study was designed to investigate the transportation, distribution, and bioaccumulation of PCBs in various environmental media and compartments using an ecologically simulated growth chamber. Spatial and temporal trends of PCBs in the growth chamber were discussed. The release of PCB congeners in soil was affected by the amount of rainfall with the transporting direction moving away from PCBs contaminated point. Two pathways of PCBs accumulation in plants were the uptake of roots and the deposition on shoots/leaves. There were 29 PCB congeners been found in the lalang grass. Higher concentrations of lower chlorinated PCBs were identified than higher chlorinated PCBs because of relatively higher vapor pressure for lower chlorinated congeners. After 10months of monitoring, PCBs were detected in water samples which were contributed by the release of PCBs from leached soil. Analysis of sediment showed that the percentages of low- and mid-chlorinated biphenyls were decreased 1% and 13%, respectively compared to the increase (14%) of high-chlorinated biphenyls. The increase of high-chlorinated PCBs was possibly caused by their low hydrophilicity which had resulted higher adsorption rate in sediment. All of five species of fish had been found significant amount of PCBs accumulation ( summation operatorPCBs: 21.7-102.1 microg/g-lipid). The concentrations of PCBs in fish were varied significantly among species. The range of bioaccumulation factors (BAFs) among different species of fish could be as much as 5 times depending on the consumption habits of fish. The mass balance of PCBs distribution in the growth chamber was also discussed.     

Distribution patterns of nitrobenzenes and polychlorinated biphenyls in water, suspended particulate matter and sediment from mid- and down-stream of the Yellow River (China)

Samples of water, suspended particulate matter (SPM) and sediment were collected from mid- and down-stream of the Yellow River. The distribution and concentration of 10 nitroaromatic compounds and polychlorinated biphenyls (PCBs) were extensively studied. The total concentration of 10 nitrobenzenes (SigmaNBs) varied from 0.269 to 9.052 microg l(-1) in water, from 2.916 to 164.4 microg kg(-1) dry weight in SPM, and from 0.954 to 14.72 microg kg(-1) dry weight in sediment. PCBs associated with the sediments, measured as the summed responses of Aroclor 1242, 1248, 1254, 1260 (in comparison to those of a standard 1:1:1:1 mixture), were found to be in the range of non-detectable to 5.98 microg kg(-1). In the samples collected, various PCB congeners showed similar distribution characteristics with congeners containing 3-5 chlorine atoms accounting for more than 96.4% of total PCB. In most of the samples, PCB concentrations occurred in the order: TetraCB > TriCB > PentaCB. Levels of SigmaNBs in the Yellow River were relatively low in comparison with values reported from other river and marine systems, and PCB levels were comparatively low. Relative to the PCBs, SigmaNBs showed significantly more difference among the various stations, presumably due to the influence of different pollution sources. No obvious correlation was observed between the pollutant concentrations and either the TOC or the grain size of the sediments.     

Organic contaminant loads into the Western Mediterranean Sea: estimate of Ebro River inputs

Annual input estimates for several organic contaminants from the Ebro River into the Northwestern Mediterranean Sea were carried out on the basis of monthly sampling from November 2002 to October 2003. Some organochlorine compounds (DDT and its degradation products, DDD and DDE, PCBs (9 congeners), HCB and gamma-HCH) were selected due to their reported occurrence in the river. Furthermore, some polar pesticides used in the Ebro Delta were also determined (atrazine, simazine, diazinon, fenitrothion and molinate). Concentrations ranged from 0.4 to 19.5 ng l(-1) for the organochlorine compounds (sum of particulate and dissolved phases) and from not detected (ND) to 170 ng l(-1) for the more polar pesticides, which were only found in the dissolved phase. The sum of PCB congeners (mean 8.9 ng l(-1)) showed the highest concentrations among the organochlorine compounds and atrazine (mean 82 ng l(-1)) among the polar pesticides. Based on the contaminant concentrations and on hydrological data, contaminant discharges into the sea were estimated amounting in total to 167 and 1,258 kg year(-1) of organochlorine compounds and polar pesticides, respectively. Furthermore, it was observed that PCBs, DDTs and HCB inputs were basically influenced by spate periods due to an increase in suspended particulate matter associated to runoff and sediment resuspension. Whereas for more water soluble contaminants, such as the agrochemicals, their seasonal use had a higher incidence in contaminant fluxes. Bulk chemical parameters such as SPM, DOC, POC, %OC, %ON and C/N ratio provided additional information on the organic matter sources. This provides a better understanding of the temporal variability of the contaminant concentrations.     

Combined steam distillation and electrochemical peroxidation (ECP) treatment of river sediment contaminated by PCBs

A combined treatment process utilizing steam distillation followed by electrochemical peroxidation (ECP) has been utilized to remove >90% of the polychlorinated biphenyls (PCBs) in St. Lawrence River sediment and destroy 95% of the PCBs recovered in the condensate. 2 l of condensate were collected by boiling 500 grams of sediment containing 4.3 mg PCBs. Most of the PCBs (82.3%) were recovered as a small volume (<1 ml) of yellow oil floating on the condensate and coating glassware surfaces. The aqueous phase PCBs (182 μg/l) were destroyed (95%) by three sequential ECP treatments at 16.8°C and pH 5, utilizing 1 ml of H₂O₂ (3%) and periodically reversed current (0.75–1.0 A @ 10 volts). Oxidation is primarily mediated by hydroxyl radicals produced by the reaction of hydrogen peroxide with electrochemically generated ferrous iron (Fenton's reagent). This work suggests steam extraction, in combination with advanced oxidation technologies, provides an effective treatment strategy for contaminated solids.     

Bench-scale testing of selected remediation alternatives for contaminated sediments

The Assessment and Remediation of Contaminated Sediments (ARCS) Program within the U.S. Environmental Protection Agency's Great Lakes National Program Office (GLNPO) contained a component for demonstrating and evaluating sediment remediation technologies. Toward this end, bench-scale tests of solvent extraction, thermal desorption, and wet air oxidation technologies were conducted. Contaminated sediments were tested from the Grand Calumet River, Indiana; Buffalo River, New York; Saginaw River, Michigan; and Ashtabula River, Ohio. The primary contaminants of concern in these sediments were polychlorinated biphenyls (PCBs) and polynuclear aromatic hydrocarbons (PAHs). The solvent extraction tests were conducted with sediments from the Grand Calumet, Buffalo, and Saginaw rivers. The thermal desorption studies were conducted with sediments from the Grand Calumet, Buffalo, and Ashtabula rivers. The wet air oxidation testing was performed with the Grand Calumet River sediment. Raw sediment contaminant concentrations ranged from 0.32-21.9 mg/kg dry mass for PCBs and 2.70-266 mg/kg dry mass for PAHs. PCB removal or destruction efficiencies ranged from approximately 6-99%. PAH removal or destruction efficiencies ranged from 65-99%. Mass balance closures ranged from 40-99% for solids; 59-139% for water; 29-3500% for oil; 16-129% for PCBs; and 69-3170% for PAHs.     

Polychlorinated biphenyls (PCBs) in sediments in Hong Kong: a congener-specific approach to the study of coplanar PCBs in aquatic ecosystems

Patterns of contamination by polychlorinated biphenyls (PCBs) were investigated in fourteen samples of coastal sediments from Hong Kong. Congener-specific analyses revealed nine sediment samples from Junk Bay to contain PCBs at concentrations ranging from 31 to 2200 ng g(-1) dry weight, concentrations generally increasing with distance north in the Bay. By contrast, five sediments from the Tolo area to the north-east of Hong Kong exhibited total PCB levels of only 6.6 to 45 ng g(-) dry weight. The patterns of relative abundance of PCB congeners in the northern Junk Bay sediments suggested the existence of ongoing source(s) of PCBs in this area; biphenyls of lower chlorination were present at high concentration in these samples. Three coplanar PCBs (3', 4, 4'-tetrachlorobiphenyl; 3,3',4,4',5-pentachlorobiphenyl; and 3,3',4,4',5,5'-hexachlorobiphenyl) were found to be present in Junk Bay sediments; these are highly toxic and are cause for concern in aquatic environments. The abundance of the three coplanar PCBs in the sediments studied was similar to that in commercial PCB mixtures, suggesting that these congeners are not enriched over other PCBs by the sediments of coastal ecosystems. It is concluded that the preferential enrichment of coplanar PCBs occurs in the biosphere, rather than in sediments.     

Biodegradation of polycyclic aromatic hydrocarbons in the natural waters of the Yellow River: effects of high sediment content on biodegradation

The contamination of polycyclic aromatic hydrocarbons (PAHs) has become one of the major problems in the Yellow River of China. As the Yellow River is the most turbid large river in the world, it remains unknown to which extent the high suspended sediment content in the river may affect the fate and effect of PAHs. Here we report the effect of sediment on biodegradation of chrysene, benzo(a)pyrene and benzo(g,h,i)perylene with phenanthrene as a co-metabolism substrate in natural waters from the Yellow River. Biodegradation kinetics of the PAHs in the river water with various levels of sediment contents were studied in the laboratory by fitting with a biodegradation kinetics model for organic compounds not supporting growth. The results indicated that the biodegradation rates of PAHs increased with the sediment content in the water. When the sediment contents were 0, 4 and 10 g/l, the biodegradation rate constants of chrysene with the initial concentration of 3.80 microg/l were 0.053, 0.084 and 0.111 d(-1), respectively. Further studies suggested the enhanced biodegradation rate in the presence of sediment was caused by the following mechanisms: (1) the population of PAH-degrading bacteria in the water system was found to increase with the sediment content; the bacteria population on sediment phase was far greater than that on water phase during the cultivation process; (2) the sorption of PAHs on the sediment phase was well described by the dual adsorption-partition model. Although the sorption capacity of PAH per unit weight of sediment decreased with the increase of the sediment content, the amount of sorbed PAH increased with the sediment content; and, (3) the desorption of PAHs from the solid phase led to a higher concentration near the water-sediment interface. Since the bacteria were also attached to the interface, this resulted in an increased contact chance between the bacteria and PAHs.     

Evidence for destruction of PCBs by the OH radical in urban atmospheres

Evidence for reaction of polychlorinated biphenyl (PCB) congeners with the hydroxyl (OH) radical in the troposphere was observed in diurnal variations in ambient gas-phase PCB concentrations at three urban sampling sites located in the Chicago, IL; Baltimore, MD; and Jersey City, NJ urban/industrial areas. The magnitude of the depletion of individual PCB congeners decreased by about 10-20% for each additional chlorine substituent, reflecting slower reaction rates for higher MW congeners with the OH radical. Octa- and nonachlorobiphenyls, which are largely unreactive with the OH radical, were used as tracers to investigate the effects of dilution on diurnal variation. The environmental rate constants for disappearance of the PCBs range from about 1.0 day(-1) for trichlorobiphenyls to about 0.3 day(-1) for hexachlorobiphenyls. Assuming a OH radical concentration of 3 x 10(6) molecules cm (-3), the second-order rate constants for reaction of specific congeners with the OH radical are consistent with laboratory measurements. More importantly, the relative reactivity of PCB homologues agrees well with the relationship predicted by other researchers from laboratory measurements, suggesting that losses of PCBs during daytime tropospheric transport are due at least in part to reactions with the OH radical.     

Resistant sorption of in situ chlorobenzenes and a polychlorinated biphenyl in river Rhine suspended matter

The desorption kinetics of in situ chlorobenzenes (dichlorobenzenes, pentachlorobenzene and hexachlorobenzene) and 2,4,4^′-trichlorobiphenyl (PCB-28) were measured with a gas-purge technique for river Rhine suspended matter sampled in Lobith, The Netherlands. This suspended matter is the main source of sediment accumulation in lake Ketelmeer. In lake Ketelmeer sediment earlier observations showed that slow and very slow fractions dominate the desorption profile.

For the river Rhine suspended matter, only for PCB-28 a fast desorbing fraction of around 1.6% could be detected. The observed rate constants were on the average 0.2 h⁻¹ for fast desorption, 0.004 h⁻¹ for slow desorption, and 0.00022 h⁻¹ for very slow desorption. These values are in agreement with previous findings for the sediment from lake Ketelmeer and with available literature data on fast, slow, and very slow desorption kinetics.

The results from this study show the similarity of desorption profiles between river Rhine suspended matter, and the top layer sediment from lake Ketelmeer. This indicates that slow and very slow fractions are already present in material forming the top layer of lake Ketelmeer, and were not formed after deposition of this material in the lake. The absence of detectable fast fractions for most compounds could be caused by the absence of recent pollution of the suspended matter. But, the observations may also be explained by a rapid disappearance of compounds from the fast fraction due to a combination of a high affinity of very slow sites for these compounds, and their relatively high volatility.     

Factors influencing lead sorption-desorption at variable added metal concentrations in Rhodoxeralfs

The response of ten soils of the lithic Rhodoxeralf type to the supply of lead at concentrations of 500, 1000, 2000, 3000, 4000, 5000 and 6000 mg kg-1 was examined in batch sorption-desorption tests. Lead availability in the soils was found to depend on its partitioning between the soil solution and the solid phase as reflected in adsorption isotherms. The isotherms, of the H type, were consistent with a high affinity of the sorbent for the metal, with which it forms stable inner-sphere complexes on the soil surface. Sorption-desorption tests revealed that some properties of the soils such as their pH (mean=8) and high contents in clays (particularly in kaolinite) and crystalline iron oxides significantly influence Pb sorption, the effect being especially marked at high added metal concentrations. Added lead is largely retained by crystalline iron oxides and the soil clay fraction; the pH of the soil favours the release of variably-charged sites from both. The extent of Pb desorption was small, particularly at the lowest added levels (500 and 1000 mg kg-1). Desorption increased with increasing added Pb concentration and exceeded 50% at 5000 and 6000 mg kg-1; this suggests that Pb is present not only as inner-sphere complexes, but also as outer-sphere complexes and, partly, as precipitates. The desorption isotherms consist of three segments that exhibit significant differences depending on the added Pb concentration, namely: 500-1000, 2000-4000 and 5000-6000 mg kg-1.     

Concentrations of polychlorinated biphenyls (PCBs) in water, sediment, and aquatic biota in the Houston Ship Channel, Texas

Polychlorinated biphenyls (PCBs) were quantified in water, sediment, and catfish and crab tissue collected from the Houston Ship Channel (HSC) in Texas. The total concentrations of the 209 PCB congeners ranged from 0.49 to 12.49 ng l(-1), 4.18 to 4601 ng g(-1) dry wt, 4.13 to 1596 ng g(-1) wet wt, and 3.44 to 169 ng g(-1) wet wt, in water, sediment, catfish and crab tissue, respectively. All media showed maximum concentrations greater than studies in other regions with the highest concentrations occurring in the most industrialized segments of the channel. Inter-media correlations suggested that sediment is a source to water. Galveston Bay sediment concentrations compared to a previous study showed a declining trend though the rate of the decline may be slowing. Detailed homolog profiles revealed that the industrialized part of the channel may be receiving PCB-laden sediment from its tributaries. An unusually high fraction of the deca-chlorinated congener (PCB-209) was found in all media. Seen in only a few other studies and in previous air concentrations in the channel, this may point to unusual Aroclor mixtures used in the history of the HSC or to contemporary sources from local industry. A comparison of PCB concentrations obtained using Aroclor, representative congener, and all congener methods, indicated that Aroclors are not an appropriate surrogate for total PCBs and that the NOAA NST method is more representative than the NOAA EPA method.     

Characteristics of sorption losses of polychlorinated biphenyl congeners onto glass surfaces

Sorption losses to glass surfaces of five polychlorinated biphenyl (PCB) congeners in aqueous solutions were investigated. Adsorption/desorption experiments were conducted under conditions that simulated actual sample handling procedures for environmental samples. It was found that the adsorption loss is related to the degree of chlorination. PCB congener 180 lost the most onto glass surfaces, followed by congeners 138, 101/28, and 52, in decreasing order. More PCB adsorption occurred onto glass under conditions of agitation and higher temperature (22°C) during the five-day experimental period. The salinity effect (“salting out effect”) was also observed in this work. The efficiency of desorption (rinsing three times with solvent) was found to be ineffective in extracting adsorbed PCBs. It was necessary to use mechanical shaking for extraction. Storage of samples up to five days resulted in sorption losses as much as 30%, 17%, 30%, 40%, and 55% of PCB 28, 52, 101, 138, and 180, respectively. Sorption losses need to be considered when conducting water sampling or toxicological studies to avoid underestimation of the actual PCB concentrations and their toxic effects.     

Uptake and depuration of toxic halogenated aromatic hydrocarbons by the American oyster (Crassostrea virginica): a field study

Uptake and depuration of toxic chlorinated compounds such as planar polychlorinated biphenyls (PCBs 77, 126, 169), 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and 2,3,7,8-tetrachlorodibenzofuran (TCDF) were monitored during a 50-day field study where American oysters (Crassostrea virginica) were transplanted back and forth between a heavily polluted area (Houston Ship Channel, SC) and a relatively unimpacted area (Hanna's Reef, HR) within Galveston Bay, TX. In general, low molecular weight, less lipophilic compounds accumulated in the oysters to a larger extent than high molecular weight ones. Estimated half-lives for planar PCB congeners 77 and 126 were 28 and 51 days, respectively for depuration of newly contaminated oysters (HR-SC-HR) while longer half-lives (42 and 60 days, respectively) were observed for the same compounds as they were eliminated from chronically contaminated individuals (SC-HR). Estimated half-lives for 2,3,7,8-TCDD and 2,3,7,8-TCDF were 35 and 36 days, respectively and were similar to the tetrachlorinated biphenyls (PCBs 77 and 81). Compared with ortho-substituted PCB congeners of the same chlorination level, the more toxic PCBs take longer to depurate from the oysters. With few exceptions, elimination of all toxic compounds investigated proceeded at a slower rate from the chronically exposed population that from the newly contaminated one.     

A kinetic distribution model of evaporation, biosorption and biodegradation of polychlorinated biphenyls (PCBs) in the suspension of Pseudomonas stutzeri

Kinetics of distribution of PCBs in an active bacterial suspension of Pseudomonas stutzeri was studied by monitoring the evaporated amounts and the concentration remaining in the liquid medium with the biomass. To determine the biodegradation rate constants of the individual congeners of the PCB formulation Delor 103, a model considering biosorption, evaporation, and primary biodegradation constructed previously was used. Rate constants of biodegradation imply that biodegradation of individual congeners is structure-dependent process. Biodegradability decreases with increasing number of chlorine substituents in the molecule, especially if they are in the ortho and para positions. On the other hand, the increasing number of free ortho and meta positions in the biphenyl molecule leads to better biodegradability. For a simple empirical determination of the influence of the chlorine substitution pattern on biodegradability, the di- and trichlorobiphenyl rate constants of biodegradation were analysed.     

Chlorination of bisphenol A: kinetics and by-products formation

The kinetics of initial chlorination of bisphenol A (BPA) was studied between pH 2 and 11 at room temperature (20 +/- 2 degrees C). pH Profile of the apparent second-order rate constant of the reaction of BPA with chlorine were modeled considering the elementary reactions of HOCl with BPA species and an acid-catalyzed reaction. The predominant reactions at near neutral pH were the reactions of HOCl with the two phenolate species of BPA (k = 3.10 x 10(4) M(-1)s(-1) for BPA- and 6.62 x 10(4) M(-1) s(-1) for BPA(2-)). At near neutral pH, half-life times of BPA were calculated to be less than 1.5 h for chlorine residual higher than 0.2 mg l(-1). Chlorination of synthetic treated waters spiked with BPA showed that BPA disappeared within 4 h and that chlorinated bisphenol A congeners were rapidly formed and remained in solution for up to 10-20 h when low chlorine dosages are applied (0.5-1 mg l(-1)). To limit their presence in drinking water networks, it is then necessary to maintain high chlorine residuals that rapidly produce and decompose chlorinated bisphenol A congeners.     

The effects of intermittent exposure to suspended solids and turbulence on three species of freshwater mussels

A laboratory experiment was performed to evaluate the effects of intermittent suspended solids exposure on the unionid clams Quadrula pustolosa, Fusconaia cerina and Pleurobema beadleanum. Intermittent impacts of this type are important effects of commercial navigation traffic in freshwater. Clams were cyclically exposed to turbulence alone or accompanied by 600-750 mg litre(-1) of suspended inorganic solids for 9 days. Clams exposed to suspended solids every 3 h reduced their metabolic rate but did not shift from the mainly protein based catabolism of controls. Feeding impairment was apparently compensated for by a reduction in metabolic demand. Conversely, clams exposed every 0.5 h to suspended solids shifted to virtually complete reliance on non-protein body stores as indicated by O:N values averaging 197.