Barriers to the use of remote sensing in providing environmental information

Remote sensing from aircraft and earth-observing satellites is an essential source of environmental information and, at regional and global scales, remote sensing from satellites is often the only way in which some information can be collected. Naturally there are technical limitations, such as low resolution and the inability of optical sensors to see through clouds that restrict the use of satellite data, but technology is moving rapidly and major advances can be expected during the current decade, especially from radar satellites.The main barriers to the use of environmental information provided by remote sensing are not technological, but include cost and a need for training and transfer of technology, and a requirement for users to depart from traditional methods where new technology offers distinct advantages. Perhaps the most important contributions that users of remote sensing data can make to breaking down the barriers to the use of environmental data is to provide very clear statements of their information requirements so that technology can develop to meet these requirements.     

Detection and object-based classification of offshore oil slicks using ENVISAT-ASAR images

The aim of this study is to propose and test a multi-level methodology for detection of oil slicks in ENVISAT Advanced Synthetic Aperture Radar (ASAR) imagery, which can be used to support the identification of hydrocarbon seeps. We selected Andrusov Ridge in the Central Black Sea as the test study area where extensive hydrocarbon seepages were known to occur continuously. Hydrocarbon seepage from tectonic or stratigraphic origin at the sea floor causes oily gas plumes to rise up to the sea surface and form thin oil films called oil slicks. Microwave sensors like synthetic aperture radar (SAR) are very suitable for ocean remote sensing as they measure the backscattered radiation from the surface and show the roughness of the terrain. Oil slicks dampen the sea waves creating dark patches in the SAR image. The proposed and applied methodology includes three levels: visual interpretation, image filtering and object-based oil spill detection. Level I, after data preparation with visual interpretation, includes dark spots identification and subsets/scenes creation. After this process, the procedure continues with categorization of subsets/scenes into three cases based on contrast difference of dark spots to the surroundings. In level II, by image and morphological filtering, it includes preparation of subsets/scenes for segmentation. Level III includes segmentation and feature extraction which is followed by object-based classification. The object-based classification is applied with the fuzzy membership functions defined by extracted features of ASAR subsets/scenes, where the parameters of the detection algorithms are tuned specifically for each case group. As a result, oil slicks are discriminated from look-alikes with an overall classification accuracy of 83% for oil slicks and 77% for look-alikes obtained by averaging three different cases.     

Using Aerial Video to Train the Supervised Classification of Landsat Tm Imagery for Coral Reef Habitats Mapping

Management of coral reef resources is a challenging task, in many cases, because of the scarcity or inexistence of accurate sources of information and maps. Remote sensing is a not intrusive, but powerful tool, which has been successfully used for the assessment and mapping of natural resources in coral reef areas. In this study we utilized GIS to combine Landsat TM imagery, aerial photography, aerial video and a digital bathymetric model, to assess and to map submerged habitats for Alacranes reef, Yucatán, México. Our main goal was testing the potential of aerial video as the source of data to produce training areas for the supervised classification of Landsat TM imagery. Submerged habitats were ecologically characterized by using a hierarchical classification of field data. Habitats were identified on an overlaid image, consisting of the three types of remote sensing products and the bathymetric model. Pixels representing those habitats were selected as training areas by using GIS tools. Training areas were used to classify the Landsat TM bands 1, 2 and 3 and the bathymetric model by using a maximum likelihood algorithm. The resulting thematic map was compared against field data classification to improve habitats definition. Contextual editing and reclassification were used to obtain the final thematic map with an overall accuracy of 77%. Analysis of aerial video by a specialist in coral reef ecology was found to be a suitable source of information to produce training areas for the supervised classification of Landsat TM imagery in coral reefs at a coarse scale.     

Automated benthic counting of living and non-living components in Ngedarrak Reef, Palau via subsurface underwater video

We introduce an automated benthic counting system in application for rapid reef assessment that utilizes computer vision on subsurface underwater reef video. Video acquisition was executed by lowering a submersible bullet-type camera from a motor boat while moving across the reef area. A GPS and echo sounder were linked to the video recorder to record bathymetry and location points. Analysis of living and non-living components was implemented through image color and texture feature extraction from the reef video frames and classification via Linear Discriminant Analysis. Compared to common rapid reef assessment protocols, our system can perform fine scale data acquisition and processing in one day. Reef video was acquired in Ngedarrak Reef, Koror, Republic of Palau. Overall success performance ranges from 60% to 77% for depths of 1 to 3 m. The development of an automated rapid reef classification system is most promising for reef studies that need fast and frequent data acquisition of percent cover of living and nonliving components.     

宜宾地区气溶胶垂直结构地基空基联合监测分析

利用Cloud-Aerosol LIDAR with Orthogonal Polarization(CALIOP)正交极化云-气溶胶星载激光雷达Level1B资料和LGJ-01型号气溶胶地基激光雷达资料对宜宾地区2016年12月—2017年2月无污染时期、少云轻度污染时期和多云重度污染时期气溶胶的衰减后向散射系数和退偏振比光学参数的垂直分布进行对比分析研究。结果表明:少云轻度污染时期,CALIOP数据监测到海拔高度为0. 2～1. 0 km范围内气溶胶颗粒集中分布,LGJ-01数据监测到厚度约为0. 2 km的近地面气溶胶层,2个激光雷达监测结果基本一致;重度污染时期,LGJ-01地基激光雷达能够较好地探测近地面气溶胶层,CALIOP星载激光雷达能够较好地探测到高空云层,若将两者结合,则能实现不同天气状况下的综合探测,以期较全面客观地为研究气溶胶垂直结构提供观测及科研数据。     

遥感技术在察布查尔县土壤侵蚀调查中的应用

依据陆地卫星TM遥感影像资料,在ERDAS软件下,通过室内判读与野外调查相结合的方法,解译出土地利用类型图、植被覆盖度图、坡度图。在建立知识库的基础上,利用土壤侵蚀专家分类系统,快速获得察布查尔县土壤侵蚀分类分级状况,为今后该区域的水土保持工作提供参考和依据。     

Invasive species change detection using artificial neural networks and CASI hyperspectral imagery

For monitoring and controlling the extent and intensity of an invasive species, a direct multi-date image classification method was applied in invasive species (salt cedar) change detection in the study area of Lovelock, Nevada. With multidate Compact Airborne Spectrographic Imager (CASI) hyperspectral data sets, two types of hyperspectral CASI input data and two classifiers have been examined and compared for mapping and monitoring the salt cedar change. The two types of input data are all two-date original CASI bands and 12 principal component images (PCs) derived from the two-date CASI images. The two classifiers are an artificial neural network (ANN) and linear discriminant analysis (LDA). The experimental results indicate that (1) the direct multitemporal image classification method applied in land cover change detection is feasible either with original CASI bands or PCs, but a better accuracy was obtained from the CASI PCA transformed data; (2) with the same inputs of 12 PCs, the ANN outperforms the LDA due to the ANN’s non-linear property and ability of handling data without a prerequisite of a certain distribution of the analysis data.     

GIS based mapping of land cover changes utilizing multi-temporal remotely sensed image data in Lake Hawassa Watershed,Ethiopia

Classifying multi-temporal image data to produce thematic maps and quantify land cover changes is one of the most common applications of remote sensing. Mapping land cover changes at the regional level is essential for a wide range of applications including land use planning, decision making, land cover database generation, and as a source of information for sustainable management of natural resources. Land cover changes in Lake Hawassa Watershed, Southern Ethiopia, were investigated using Landsat MSS image data of 1973, and Landsat TM images of 1985, 1995, and 2011, covering a period of nearly four decades. Each image was partitioned in a GIS environment, and classified using an unsupervised algorithm followed by a supervised classification method. A hybrid approach was employed in order to reduce spectral confusion due to high variability of land cover. Classification of satellite image data was performed integrating field data, aerial photographs, topographical maps, medium resolution satellite image (SPOT 20 m), and visual image interpretation. The image data were classified into nine land cover types: water, built-up, cropland, woody vegetation, forest, grassland, swamp, bare land, and scrub. The overall accuracy of the LULC maps ranged from 82.5 to 85.0 %. The achieved accuracies were reasonable, and the observed classification errors were attributable to coarse spatial resolution and pixels containing a mixture of cover types. Land cover change statistics were extracted and tabulated using the ERDAS Imagine software. The results indicated an increase in built-up area, cropland, and bare land areas, and a reduction in the six other land cover classes. Predominant land cover is cropland changing from 43.6 % in 1973 to 56.4 % in 2011. A significant portion of land cover was converted into cropland. Woody vegetation and forest cover which occupied 21.0 and 10.3 % in 1973, respectively, diminished to 13.6 and 5.6 % in 2011. The change in water body was very peculiar in that the area of Lake Hawassa increased from 91.9 km² in 1973 to 95.2 km² in 2011, while that of Lake Cheleleka whose area was 11.3 km² in 1973 totally vanished in 2011 and transformed into mud-flat and grass dominated swamp. The “change and no change” analysis revealed that more than one third (548.0 km²) of the total area was exposed to change between 1973 and 2011. This study was useful in identifying the major land cover changes, and the analysis pursued provided a valuable insight into the ongoing changes in the area under investigation.     

Land cover change of watersheds in Southern Guam from 1973 to 2001

Land cover change can be caused by human-induced activities and natural forces. Land cover change in watershed level has been a main concern for a long time in the world since watersheds play an important role in our life and environment. This paper is focused on how to apply Landsat Multi-Spectral Scanner (MSS) satellite image of 1973 and Landsat Thematic Mapper (TM) satellite image of 2001 to determine the land cover changes of coastal watersheds from 1973 to 2001. GIS and remote sensing are integrated to derive land cover information from Landsat satellite images of 1973 and 2001. The land cover classification is based on supervised classification method in remote sensing software ERDAS IMAGINE. Historical GIS data is used to replace the areas covered by clouds or shadows in the image of 1973 to improve classification accuracy. Then, temporal land cover is utilized to determine land cover change of coastal watersheds in southern Guam. The overall classification accuracies for Landsat MSS image of 1973 and Landsat TM image of 2001 are 82.74% and 90.42%, respectively. The overall classification of Landsat MSS image is particularly satisfactory considering its coarse spatial resolution and relatively bad data quality because of lots of clouds and shadows in the image. Watershed land cover change in southern Guam is affected greatly by anthropogenic activities. However, natural forces also affect land cover in space and time. Land cover information and change in watersheds can be applied for watershed management and planning, and environmental modeling and assessment. Based on spatio-temporal land cover information, the interaction behavior between human and environment may be evaluated. The findings in this research will be useful to similar research in other tropical islands.     

Mapping chlorophyll-a through in-situ measurements and Terra ASTER satellite data

This paper presents an application of water quality mapping through real-time satellite and ground data. The Lake Beysehir which is the largest freshwater lake and drinking water reservoir in Turkey was selected as the study area. Terra ASTER satellite image is used as remote sensing data source for water quality mapping in addition to simultaneously performed in-situ measurements. Ground data is collected simultaneously with the ASTER overpass on June 09, 2005 over the Lake Beysehir. The spatial distribution map is developed by using multiple regression (MR) technique for water quality parameter, which is chlorophyll-a (chl-a). The results indicate that simultaneous ground and satellite remote sensing data are highly correlated (R (2) > 0.86). In the image processing step, geometric correction, image filtering and development of water quality map procedures are performed with the ERDAS Imagine and ArcGIS 9.0 software. The trophic status of Lake Beysehir is considered to be oligotrophic with an average 1.55 microg/l chl-a concentration.     

Land cover classification with an expert system approach using Landsat ETM imagery: a case study of Trabzon

The main objective of this study is to generate a knowledge base which is composed of user-defined variables and included raster imagery, vector coverage, spatial models, external programs, and simple scalars and to develop an expert classification using Landsat 7 (ETM+) imagery for land cover classification in a part of Trabzon city. Expert systems allow for the integration of remote-sensed data with other sources of geo-referenced information such as land use data, spatial texture, and digital elevation model to obtain greater classification accuracy. Logical decision rules are used with the various datasets to assign class values for each pixel. Expert system is very suitable for the work of image interpretation as a powerful means of information integration. Landsat ETM data acquired in the year 2000 were initially classified into seven classes for land cover using a maximum likelihood decision rule. An expert system was constructed to perform post-classification sorting of the initial land cover classification using additional spatial datasets such as land use data. The overall accuracy of expert classification was 95.80%. Individual class accuracy ranged from 75% to 100% for each class.     

秸秆焚烧对哈尔滨市灰霾天气的影响

2015年11月1—4日,哈尔滨市及周边地区发生了连续的灰霾天气,颗粒物浓度急剧升高。污染发生时,监测仪器均布设在哈尔滨市区上风向30 km处(哈尔滨市双城区)并开展了连续96 h的监测分析。综合利用气象观测资料,3D可视激光雷达监测资料及地面空气污染监测资料分析了灰霾天气发生的气象条件和污染边界层特征,根据哈尔滨市双城区大气污染物排放源谱库对主要成分进行来源解析,结合颗粒物质量浓度和气象条件研究了秸秆焚烧对灰霾天气的影响。结果表明,灰霾天气持续期间,夜间生物质燃烧源成为该地区颗粒物的第二大源;秸秆焚烧产生的大气污染物,由于地面长时间静风,污染边界层降低等原因,致使本地污染物累积、不易扩散,加剧了本次污染。     

A comparison of radiometric correction techniques in the evaluation of the relationship between LST and NDVI in Landsat imagery

Atmospheric corrections for multi-temporal optical satellite images are necessary, especially in change detection analyses, such as normalized difference vegetation index (NDVI) rationing. Abrupt change detection analysis using remote-sensing techniques requires radiometric congruity and atmospheric correction to monitor terrestrial surfaces over time. Two atmospheric correction methods were used for this study: relative radiometric normalization and the simplified method for atmospheric correction (SMAC) in the solar spectrum. A multi-temporal data set consisting of two sets of Landsat images from the period between 1991 and 2002 of Penang Island, Malaysia, was used to compare NDVI maps, which were generated using the proposed atmospheric correction methods. Land surface temperature (LST) was retrieved using ATCOR3_T in PCI Geomatica 10.1 image processing software. Linear regression analysis was utilized to analyze the relationship between NDVI and LST. This study reveals that both of the proposed atmospheric correction methods yielded high accuracy through examination of the linear correlation coefficients. To check for the accuracy of the equation obtained through linear regression analysis for every single satellite image, 20 points were randomly chosen. The results showed that the SMAC method yielded a constant value (in terms of error) to predict the NDVI value from linear regression analysis-derived equation. The errors (average) from both proposed atmospheric correction methods were less than 10%.     

Characterization of Escherichia Coli Isolates from Different Fecal Sources by Means of Classification Tree Analysis of Fatty Acid Methyl Ester (Fame) Profiles

Microbial source tracking (MST) methods need to be rapid, inexpensive and accurate. Unfortunately, many MST methods provide a wealth of information that is difficult to interpret by the regulators who use this information to make decisions. This paper describes the use of classification tree analysis to interpret the results of a MST method based on fatty acid methyl ester (FAME) profiles of Escherichia coli isolates, and to present results in a format readily interpretable by water quality managers. Raw sewage E. coli isolates and animal E. coli isolates from cow, dog, gull, and horse were isolated and their FAME profiles collected. Correct classification rates determined with leaveone-out cross-validation resulted in an overall low correct classification rate of 61%. A higher overall correct classification rate of 85% was obtained when the animal isolates were pooled together and compared to the raw sewage isolates. Bootstrap aggregation or adaptive resampling and combining of the FAME profile data increased correct classification rates substantially. Other MST methods may be better suited to differentiate between different fecal sources but classification tree analysis has enabled us to distinguish raw sewage from animal E. coli isolates, which previously had not been possible with other multivariate methods such as principal component analysis and cluster analysis.     

Shadow attenuation with high dynamic range images

Shadow often interferes with accurate image analysis. To mitigate shadow effects in near-earth imagery (2 m above ground level), we created high dynamic range (HDR) nadir images and used them to measure grassland ground cover. HDR composites were created by merging three differentially exposed images spanning a wide exposure range and resulted in lightened shadows. HDR images showed more detail; reduced the numbers of pure black, pure white, and pixels visually indistinguishable from black and white; reapportioned skewed luma values towards a normal distribution; and increased the Euclidean distance between litter and bare ground RGB values--allowing increased feature separation; all of which facilitated an increase in real feature classification through manual image analysis. Drawbacks to the method included decreased image sharpness due to minor misalignment of images or moving vegetation, time required to create HDR images, and difficulty with acquiring primary images from a moving platform. We conclude that HDR imagery can provide more accurate measurements of bare soil cover for ecosystem monitoring and assessment.     

Mapping Turbidity in the Charles River, Boston Using a High-resolution Satellite

The usability of high-resolution satellite imagery for estimating spatial water quality patterns in urban water bodies is evaluated using turbidity in the lower Charles River, Boston as a case study. Water turbidity was surveyed using a boat-mounted optical sensor (YSI) at 5 m spatial resolution, resulting in about 4,000 data points. The ground data were collected coincidently with a satellite imagery acquisition (IKONOS), which consists of multispectral (R, G, B) reflectance at 1 m resolution. The original correlation between the raw ground and satellite data was poor (R2 = 0.05). Ground data were processed by removing points affected by contamination (e.g., sensor encounters a particle floc), which were identified visually. Also, the ground data were corrected for the memory effect introduced by the sensor's protective casing using an analytical model. Satellite data were processed to remove pixels affected by permanent non-water features (e.g., shoreline). In addition, water pixels within a certain buffer distance from permanent non-water features were removed due to contamination by the adjacency effect. To determine the appropriate buffer distance, a procedure that explicitly considers the distance of pixels to the permanent non-water features was applied. Two automatic methods for removing the effect of temporary non-water features (e.g., boats) were investigated, including (1) creating a water-only mask based on an unsupervised classification and (2) removing (filling) all local maxima in reflectance. After the various processing steps, the correlation between the ground and satellite data was significantly better (R2 = 0.70). The correlation was applied to the satellite image to develop a map of turbidity in the lower Charles River, which reveals large-scale patterns in water clarity. However, the adjacency effect prevented the application of this method to near-shore areas, where high-resolution patterns were expected (e.g., outfall plumes).     

General plume dispersion model (GPDM) for point source emission

Gaussian-based dispersion models are widely used to estimate local pollution levels. The accuracy of such models depends on stability classification schemes as well as plume rise equations. A general plume dispersion model (GPDM) for a point source emission, based on Gaussian plume dispersion equation, was developed. The program complex was developed using Java and Visual basic tools. It has the flexibility of using five kinds of stability classification schemes, i.e., Lapse Rate, Pasquill–Gifford (PG), Turner, σ–θ and Richardson number. It also has the option of using two types of plume rise formulations – Briggs and Holland’s. The model, applicable for both rural and urban roughness conditions, uses meteorological and emission data as its input parameters, and calculates concentrations of pollutant at the center of each cell in a predefined grid area with respect to the given source location. Its performance was tested by comparing with 4-h average field data of continuous releases of SO₂ from Dadri thermal power plant (Uttar Pradesh, India). Results showed that the Turner scheme used with Holland’s equation gives the best outcome having a degree of agreement (d) of 0.522.     

Coastal Flood Risk Analysis Using Landsat-7 ETM+ Imagery and SRTM DEM: A Case Study of Izmir, Turkey

The Intergovernmental Panel on Climate Change (IPCC) reports an acceleration of the global mean sea-level rise (MSLR) in the twentieth century in response to global climate change. If this acceleration remains constant, then some coastal areas are most likely to be inundated by the year 2100. The ability to identify the differential vulnerability of coastlines to future inundation hazards as result of global climate change is necessary for timely actions to be taken. Yildiz et al. (Journal of Mapping, 17, 1-75, 2003) reported that the local MSLR in the city of Izmir rose at a rate of 6.8 +/- 0.9 mm year(-1) between 1984 and 2002. In this study, the spatial distribution of the coastal inundation hazards of Izmir region was determined using not only land-use and land-cover (LULC) types derived from the maximum likelihood classification of Landsat-7 Enhanced Thematic Mapper Plus (ETM+) multi-spectral image set but also the classification of the digital elevation model (DEM) acquired by the shuttle radar topography mission (SRTM). Coastal areas with elevations of 2 and 5 m above mean sea-level vulnerable to inundation were found to cover 2.1 and 3.7% of the study region (6,107 km(2)), respectively. Our findings revealed that Menemen plain along Gediz river, and the settlements of Karsiyaka, Alacati, Aliaga, Candarli and Selcuk are at high risk in order of decreasing vulnerability to permanent and episodic inundation by 2100 under the high MSLR scenarios of 20 to 50 mm year(-1).     

光电技术在大气氮氧化物检测中的应用

介绍了大气中氮氧化物的组成,综述了激光诱导荧光法、光纤传感法、激光雷达探测法和化学发光法测定大气中氮氧化物的原理和特点,指出光电技术已在大气氮氧化物检测中得到了广泛的应用,并具有良好的发展前景。     

环境统计与排污许可衔接的工业源排放核算研究

环境统计面临依据排污许可数据估算工业污染排放总量的挑战.以某市4个行业6类污染物的排放数据为案例,讨论了在非重点源污染排放量估算问题上衔接排污许可和环境统计的可行性和存在的问题.研究结果表明:排污许可重点管理单位与环境统计重点调查单位存在显著差异,不能采用比率估算方法估算工业非重点源排污量;排污许可简化和登记管理单位排...