废弃印刷线路板最佳分离参数的实验研究

为研究废弃印刷线路板的热解特性,确定金属和非金属分离的热解最佳参数,用差热-热重联用分析仪对FR-4型印刷线路板进行了热失重分析,并对影响废弃印刷线路板中金属和非金属分离效果的升温速率、颗粒尺寸、热解终温和保温时间等主要因素进行了实验研究。结果表明,FR-4型线路板在320~360℃区间热失重速率达到最大值;升温速率越高,热解起始温度、终止温度和失重峰温也越高,显著失重过程持续的时间越长;当热解终温相同时,升温速率对FR-4型线路板的热失重率影响很小。综合考虑FR-4型废弃印刷线路板中金属和非金属的分离效果、热解装置的设计、热解过程的能耗以及运行过程的控制等因素,最佳热解参数建议设定为升温速率为10℃/min,热解终温为500℃,保温时间取30 min为宜。     

超声-过氧化氢-氧化铜组合技术催化氧化水中苯酚

研究了超声-H2O2-CuO组合技术对苯酚的降解效果。考察了苯酚初始浓度、溶液温度及鼓入空气对苯酚去除率的影响。实验结果表明,与未鼓入空气时相比,连续鼓气时苯酚的降解效果较好;初始浓度低,苯酚去除率高;溶液温度从20℃上升到55℃时,苯酚去除率随温度升高而增大,温度对该过程的影响主要表现为对催化剂的影响而不是对超声作用的影响。高效液相色谱分析表明,苯酚降解的中间产物主要为对苯二酚、邻苯二酚及其他有机小分子物质,最终产物为草酸、二氧化碳和水。     

超临界丙酮降解废弃线路板中的溴化环氧树脂

探讨废弃线路板中溴化环氧树脂在超临界丙酮中的脱溴降解特性,重点考察了温度、反应时间和有机溶剂添加量对溴化环氧树脂降解特性的影响,确立的最佳实验条件为:温度260℃、保温时间1~2 h、丙酮添加量20~40 mL,系统压强3~6 MPa,此时溴化环氧树脂能够快速降解,脱溴率达到97.94%,降解产物主要为苯酚和异丙基苯酚,含量分别为60.99%和3.12%,降解产物中溴主要以HBr的形式存在于油相中,可以用碱液从油相中萃取脱除。线路板经超临界丙酮处理后,铜箔与玻璃纤维自动分层解离便于后续破碎回收,为废弃线路板的无害化处理和资源回收利用提供了一条新途径。     

超临界丙酮降解废弃线路板中的溴化环氧树脂简

探讨废弃线路板中溴化环氧树脂在超临界丙酮中的脱溴降解特性,重点考察了温度、反应时间和有机溶剂添加量对溴化环氧树脂降解特性的影响,确立的最佳实验条件为：温度260℃、保温时间1~2 h、丙酮添加量20~40 mL,系统压强3~6 MPa,此时溴化环氧树脂能够快速降解,脱溴率达到97.94%,降解产物主要为苯酚和异丙基苯酚,含量分别为60.99%和3.12%,降解产物中溴主要以HBr的形式存在于油相中,可以用碱液从油相中萃取脱除。线路板经超临界丙酮处理后,铜箔与玻璃纤维自动分层解离便于后续破碎回收,为废弃线路板的无害化处理和资源回收利用提供了一条新途径。     

超声-过氧化氢-氧化铜组合技术催化氧化水中苯酚

研究了超声-H2O2-CuO组合技术对苯酚的降解效果。考察了苯酚初始浓度、溶液温度及鼓入空气对苯酚去除率的影响。实验结果表明，与未鼓入空气时相比，连续鼓气时苯酚的降解效果较好；初始浓度低，苯酚去除率高；溶液温度从20％上升到55％时，苯酚去除率随温度升高而增大，温度对该过程的影响主要表现为对催化剂的影响而不是对超声作用的影响。高效液相色谱分析表明，苯酚降解的中间产物主要为对苯二酚、邻苯二酚及其他有机小分子物质，最终产物为草酸、二氧化碳和水。     

超临界CO2流体环境中线路板分层实验分析

在超临界CO2流体环境下,当温度达到240℃以上时,印刷线路板就会发生分层现象。同时,在实验中发现在非超临界流体环境下,当温度达到260℃以上时,线路板也会发生分层现象。从线路板粘接材料发生热解反应的角度出发,在对比超临界CO2流体环境下与非超临界流体环境下的线路板分层效果的基础上,对超临界CO2流体环境下的线路板分层...     

超声协同下镍铁双金属化合物催化降解水溶液中的四氯化碳

以水合肼作为还原剂、PVP作为稳定剂,在碱性条件下借助水热途径制备了Fe Ni3双金属化合物,并对其物相结构与外观形貌进行了表征。在超声协同作用下用自制的Fe Ni3化合物微粉作为催化剂对水溶液中的四氯化碳进行了催化降解处理,考查了超声功率、催化剂加入量、温度和p H值对四氯化碳降解效果的影响,同时,与超声辅助还原铁粉降解四氯化碳进行了比较。结果表明,Fe Ni3化合物对于水溶液中的四氯化碳具有显著的催化降解作用,催化剂投加量增大,四氯化碳的降解率升高。在给定的实验条件下,温度对四氯化碳降解效果的影响最为显著,40℃时,15 min内四氯化碳的降解率即可达到94.61%,而且其降解效果明显优于还原铁粉(68.34%)。     

超临界CO_2流体环境中线路板分层实验分析

在超临界CO2流体环境下,当温度达到240℃以上时,印刷线路板就会发生分层现象。同时,在实验中发现在非超临界流体环境下,当温度达到260℃以上时,线路板也会发生分层现象。从线路板粘接材料发生热解反应的角度出发,在对比超临界CO2流体环境下与非超临界流体环境下的线路板分层效果的基础上,对超临界CO2流体环境下的线路板分层做出合理分析,最后发现临界CO2流体对线路板分层过程有促进作用,并对其分层效果有优化作用。     

电选法回收利用废印刷线路板

废印刷线路板含有多种有价值的物质,随意丢弃或处理处置方法不当既污染环境,又造成资源流失。采用剪切式破碎和电力分选技术对废印刷线路板的机械分离进行了研究。结果表明,电选法可以实现废印刷线路板中金属和玻璃纤维、树脂的分离;在实验的粒径范围内(-14+20目到-120+200目分为5个粒径级别),金属主要集中在-20+120目粒级范围内,且该粒级范围分选效果最好。     

电选法回收利用废印刷线路板

废印刷线路板含有多种有价值的物质，随意丢弃或处理处置方法不当既污染环境，又造成资源流失。采用剪切式破碎和电力分选技术对废印刷线路板的机械分离进行了研究。结果表明，电选法可以实现废印刷线路板中金属和玻璃纤维、树脂的分离；在实验的粒径范围内（-14＋20目到-120＋200目分为5个粒径级别），金属主要集中在-20＋120目粒级范围内，且该粒级范围分选效果最好。     

Optimization of Height of Release of Air Pollutants

A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO₂ removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

实验室质量管理体系内部审核的实施

在实施ISO／IEC17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核实施阶段的关键环节，提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法，对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

扬中生态环境建设的思考与实践

结合扬中生态环境的基本情况和存在的不足，进行了具体分析，对扬中未来生态建设的发展方向提出了建议及实施措施。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

Comparison of methods for evaluation of activity of photocatalytic films

Objective

This work aims to investigate the correlation between the photocatalytic activity determined by methylene blue bleaching (DIN 52980), stearic acid degradation, and degradation of acetone in gas phase.

Method

The photocatalytic TiO₂ coatings included in this investigation ranged from thin commercially available coatings (Activ^TM and BioClean^TM) and ready to use suspensions (Nano-X PK1245) to lab-produced PVD and sol?Cgel coatings. XRD analysis of the photocatalytic coatings showed that all the coatings consisted of nanocrystalline anatase, although the thickness and porosity varied considerably.

Results

The study showed that the reproducibility of the activity measurements was good. However, more importantly, the investigation showed that there is a good correlation between the activities determined by the different methods even though the characteristics of the photocatalytic coatings and the organic probe molecules varied considerably.

Conclusion

The overall findings of this work suggest that there is a good correlation between the investigated methods. These results are promising for the future work concerning standardization of methods for determination of the activity of photocatalytic films.     

Impact of overexploitation of shellfish: northeastern coast of India

India has a very extensive coastline of about 7515 km, rich in diverse living resources. These resources continue to deteriorate with rampant harvesting or are altered for other uses such as aquaculture and fisheries. The present paper deals with degrading coastal habitats in northeastern India, and projects the intensity of the stress arising from the collection of tiger prawn seeds (Penaeus monodon) for aquacultural farms and molluskan shells for poultry feed and edible lime. Indiscriminate exploitation of these resources leads to a heavy reduction of the species concerned and other associated marine communities. The magnitude of such destruction has been quantified. The impacts of biodiversity loss and their after-effects on the ecobalance of this coastal system have become a matter of great concern to ecologists to maintain security and sustainability. The authors propose a public awareness program on themes relating to the importance of biodiversity for human livelihoods.