Ecotoxicological impact assessment of some heavy metals and their distribution in some fractions of mangrove sediments from Red Sea, Egypt

The total and fraction concentrations of heavy metals (Mn, Cu, Ni, Pb, Co, and Cd) were analyzed in some sediment fractions (Φ2, Φ3, Φ4, Φ5) of selected mangrove ecosystems collected from the Egyptian Red Sea shoreline. The results revealed that manganese had the highest mean value (133?±?97 mg/kg) followed by copper (49.9?±?46.0 mg/kg), nickel (28.1?±?11.8 mg/kg), lead (19?±?13 mg/kg), cobalt (6.7?±?4.0 mg/kg), and cadmium (3.327?±?1.280 mg/kg). The concentrations of heavy metals in the different sediment fractions showed that there was a preferential accumulation of Cu, Co, Mn, and to a lesser degree Cd in the silt and clay fractions rather than in the sand-sized. The sediment quality was performed by using some sediment quality guidelines. Additionally, the contamination and the risk assessment of these heavy metals were achieved by different methods including, potential ecological risk index, contamination factor, pollution load index, and geoaccumulation index. According to the Sediment Quality Guidelines comparisons, the concentrations of Mn and Pb were low and showed no possibility of detrimental effects on the local environment. The levels of Cu and Ni were high, however, could not be considered to present serious threat to the mangrove ecosystem. The data showed that the mangrove ecosystems were affected by the Cd risk.     

Assessing heavy metal pollution in the recent bottom sediments of Mabahiss Bay, North Hurghada, Red Sea, Egypt

Thirty-nine samples of recent bottom sediments were collected from Mabahiss Bay, north of Hurghada City, Red Sea, Egypt. The collected samples were subjected to a total digestion technique and analyzed by absorption spectrometer for metals including Pb, Zn, Cd, Ni, Co, Cu, and Mn. Concentration data were processed using correlation analysis, principal component analysis, and hierarchical cluster analysis. Multivariate statistical analysis classified heavy metals in the study area into different groups. The pollution level attributed to these metals was evaluated using geoaccumulation index and contamination factor in order to determine anthropogenically derived sediment contamination. The results of both geoaccumulation index and contamination factor results reveal that the study area is not contaminated with respect to Zn, Ni, Cu, and Mn; uncontaminated to moderately contaminate with Pb; and moderately to strongly contaminate with Cd. The high contents of Pb, Cd, and Co in the study area result from various anthropogenic activities including dredging, land filling, localized oil pollution, using of antifouling and anticorrosive paints from fishing and tourist boats, and sewage discharging from various sources within the study area.     

Chemical composition of some seaweed from Mediterranean Sea coast, Egypt

This study pointed to the assessment of the chemical composition (F, Ca, Mg, Na, K, Fe, Mn, Zn, Cu, Ni, Co, Cr, Cd, and carbohydrate) of different marine seaweeds (red, green, and brown) from the Egyptian Mediterranean Sea coast. The results showed that green seaweeds supplied better calcium sources than the red and brown ones. Also, red and brown seaweeds showed higher averages of Na and K than that in green species and these seaweeds could play an important role in the electrolyte balance in humans. On the other hand, green seaweeds gave the highest average carbohydrate concentration; thus, these green species could be used as a source of polysaccharides. Ion quotient values for almost seaweed species were between 1.4 and 4.0, so they can reduce hypertension, preeclampsia, and heart disease in human beings. Interestingly, the calculated hazard quotient of elements was below 1. Accordingly, these seaweed species were of high quality and safety and might be used in the field of nutrition.     

Assessment of elemental distribution and trace element contamination in surficial wetland sediments, Southern Tibetan Plateau

In order to analyze and evaluate different trace metals on surface water of the Changjiang River, concentrations of dissolved trace metals (Cu, Ni, Fe, Co, Sc, Al, Zn, Pb, Cd, Se, As, Cr, and Hg), major elements(Ca and Mg), and nutrient(NO $_{3}^{-})$ were measured. Samples were taken at 76 positions along Changjiang River in flood and dry seasons during 2007?C2008. Spatial distributions identified two main large zones mainly influenced by mineral erosion (sites 1?C22) and anthropogenic action (sites 23?C76), respectively. Principal component analysis (PCA) and hierarchical cluster analysis were used to identify the variance distinguishing the origin of water. Four significant components were extracted by PCA, explaining 74.91% of total variable. Cu, Ni, Fe, Co, Sc, Al, Ca, and Mg were mainly associated with the weathering and erosion of various rocks and minerals, while an anthropogenic source was identified for Cd and As. Although erosion was one source of Pb and Zn, they were also input by atmospheric deposition and industrial pollutions. NO $_{3}^{-}$ and Se were mainly associated with agriculture activities. However, Hg and Cr showed different sources. CA confirmed and completed the results obtained by PCA, classifying the data into two large groups representing different areas. Group 1 referred to the upper reaches which represented samples mainly corresponding to natural background areas. Group 2 referred to the middle and lower reaches including samples under anthropogenic influence. Meanwhile, group 2 was subdivided into three new groups, representing agricultural, industrial, and various artificial pollution sources, respectively.     

Biomonitoring study of heavy metals in biota and sediments in the South Eastern coast of Mediterranean sea, Egypt

Concentrations of Cd, Cu, Co, Zn, Mn and Fe were determined in biota and sediment samples collected from the Eastern Harbour and El-Mex Bay in the Mediterranean Sea, Egypt. The levels of Cu, Co, Zn, Mn and Fe in the macroalgae, Ulva lactuca, Enteromorpha compressa (green algae) and Jania rubens (red algae), recorded high concentrations except for Cd. Moreover, Fe was the most predominant metal in the seaweed. The two species of bivalves, Donax trunculus and Paphia textile, showed different amounts of metals in their tissue. The abundance of heavy metal concentrations in the mussel samples was found in the order Fe> Zn> Mn> Cu> Co> Cd and Fe> Zn> Mn> Cu> Cd> Co, respectively for the two species. The metals concentrations were generally higher compared with the previous studies in mussels from the same area. The levels of metals accumulated in the investigated fish samples, Saurida undosquamis, Siganus rivulatus, Lithognathus mormyrus and Sphyraena sphyraena, were higher than those of Marmara Sea (Turkey), for Co and Cd and lower for Cu, Zn, Mn and Fe. El-Mex Bay having the highest metals concentration in sediments as their order of abundance were Fe> Zn> Mn> Cu> Cd> Co. Nevertheless, a high variability in the metal levels occurs among the studied algae and biota and also between the investigated Harbour. A significant correlations (p < 0.05) were found for each of Zn and Fe in P. textile and of Co in D. trunculus relative to their concentrations in surficial sediments.     

Levels,distribution and risk assessment of hexabromocyclododecane (HBCD) in fish in Xiamen,China

Environmental Monitoring and Assessment - An accidental or intentional contamination event can raise health and sociopolitical concerns, erode public trust, and affect the operation of water...     

Morphological deformities of benthic foraminifera in response to nearshore pollution of the Red Sea,Egypt

The Red Sea encompasses a wide range of tropical marine habitats that are stressed due to anthropogenic activities. The main anthropogenic activities are hydrocarbon exploration and important trading harbors. This work aims to assess the influence of the Red Sea coastal heavy metal contamination on the marine meiofauna along three sites (Ras Gharib, Safaga, and Quseir). Eight heavy metal (Cu, Cd, Zn, Pb, Cr, Co, Ni, and Mn) contents are considered in four benthic foraminiferal species (Elphidium striatopunctatum, Amphistegina lobifera, Amphisorus hemprichii, and Ammonia beccarii). Quseir Harbor showed the highest level of pollution followed by Safaga and Ras Gharib sites. The analyzed benthic foraminiferal tests displayed noteworthy high concentrations of Cd, Zn, and Pb in Quseir Harbor which could be attributed to the anthropogenic activities in the nearshore areas. Some foraminiferal tests exhibited abnormalities in their apertures, coiling, and shape of chambers. A comparison between normal and deformed foraminiferal tests revealed that the deformed ones are highly contaminated with elevated heavy metal contents such as Fe, Mn, Ni, and Cd. Statistics in addition to geo-accumulation and pollution load indices reveal a whistling alarm for the Quseir harbor. The present data are necessary to improve conservation and management of the Red Sea ecosystem in the near future.     

Spatial distribution and risk assessment of heavy metals in sediments from a hypertrophic plateau lake Dianchi, China

The sediment in Dianchi Lake, a hypereutrophic plateau lake in southwest China, was investigated and the concentration of heavy metals (Cu, Cr, Ni, Zn, Pb, Fe, Mn, and Cd) in the sediment and sediment properties were determined. Their spatial distribution and sources were analyzed using multivariate statistics. The result indicated that the studied metals exhibited three distinct spatial patterns; that is, Cu, Pb, Zn, and Ni had a similar distribution, with a concentration gradient from the north to the south part of the lake; Cd and Cr presented a similar distribution; Fe and Mn presented a quite different distribution than other metals, which indicated their different sources and geochemistry processes. Correlation and cluster analysis (CA) provided origin information on these metals and the CA result was observed corresponding to those three spatial patterns. Principal component analysis further displayed metal source and driving factors; that is, Cu, Pb, Zn, Ni, Cd, and Cr were mainly derived from anthropogenic sources, and Fe and Mn were mainly the result of natural processes. Sediment assessment was conducted using geoaccumulation index (Igeo), potential ecological risk indices, and USEPA guidelines. The result indicated that, generally, Cd was the most serious risk metal; Pb and Cu posed moderate potential ecological risk; Cr, Zn, and Ni had slight ecological risk; Fe and Mn had little risk. Comparison of the assessment tools showed that each of the methods had its limitation and could bias the result, and the combined use of the methodologies and local knowledge on lithology or metal background value of soil in the practice would give a more comprehensive understanding of the metal risk or pollution. Statistical analysis also indicated that nutrients had different impacts on Fe, Mn, and trace elements, which implied that in the assessment of metal risk, nutrients impact should be taken into consideration especially for eutrophic waters.     

Fraction distribution and risk assessment of heavy metals and trace elements in sediments of Lake Uluabat

To examine the status and risk of heavy metal pollution, the distribution of As, Cd, Cr, Ni, and Pb in the sediment of Lake Uluabat was characterized. The present study used a four-stage method to assess the ecotoxicological effects of the heavy metal and trace elements fractions in the sediment of Lake Uluabat. Total Cr and Ni concentrations in the sediment were determined to have exceeded the severe effect level (SEL) limit values. The percentages of the variable fractions of Cr and Ni were below 10%. Because of this reason, they were not defined to have a high risk. The relationships among the physicochemical parameters, heavy metals and trace elements in water and sediment were determined statistically. Pb, Cd, and As in the water were found in relation with some of the fractions. Moreover, it was thought that the amounts of the elements of As releasing into the water might be increased due to their relations with the physicochemical parameters.     

Spatial distribution and potential ecologic risk assessment of heavy metals in the sediments of the Nansi Lake in China

The contamination levels and ecological risks of heavy metals in the sediments of the Nansi Lake were investigated. The contents of Cd, Cr, Cu, Pb, Zn, Ni, and Co in the surface sediments collected at 20 sites ranged from 0.08 to 1.12, 58.92 to 135.62, 38.09 to 78.65, 24.51 to 53.95, 110.51 to 235.36, 11.30 to 65.40, and 4.12 to 20.14 mg/kg, respectively. The results of partitioning analysis revealed that the proportions of soluble and exchangeable fraction were less than 1 %, the proportions of carbonate, amorphous oxides, organic matter, and crystalline oxides fraction were less than 10 %, and 10.52 % of Cd was associated with carbonate. The average proportions in the residual fraction ranged from 48.62 % for Cu to 73.76 % for Ni, indicating low mobility and bioavailability. The geoaccumulation index (I _geo), relative enrichment factor (REF), sediment pollution index (SPI), and potential effect concentration quotient (PECQ) values of the heavy metals in the sediments were not in agreement with each another. The average REF values of Cd and Zn were higher than those of other metals. However, the average PECQ values were higher for Cr and Ni than those of other metals, indicating that these two metals would cause higher adverse biological effects. Therefore, it is suggested that future management and pollution control might focus on Cd, Zn, Cr, and Ni in the sediments of the Nansi Lake.     

Heavy metal in surface sediments of the Liaodong Bay, Bohai Sea: distribution, contamination, and sources

In an effort to assess the potential contamination and determine the environmental risks associated with heavy metals, the surface sediments in Liaodong Bay, northeast China, were systematically sampled and analyzed for the concentrations of Cu, Pb, Zn, Cr, Ni, As, and Hg. The metal enrichment factor (EF) and geoaccumulation index (I _geo) were calculated to assess the anthropogenic contamination in the region. Results showed that heavy metal concentrations in the sediments generally met the criteria of China Marine Sediment Quality (GB18668-2002); however, both EF and I _geo values suggested the elevation of Pb concentration in the region. Based on the effect-range classification (TEL-PEL SQGs), Cu, Pb, Ni, and As were likely to pose environment risks, and the toxic units decreased in the order: Ni?>?Pb?>?Cr?>?Zn?>?As?>?Cu?>?Hg. The spatial distribution of ecotoxicological index (mean-ERM-quotient) suggested that most of the surface sediments were “low–medium” priority zone. Multivariate analysis indicated that the sources of Cr, Ni, Zn, Cu, and Hg resulted primarily from parent rocks, and Pb or As were mainly attributed to anthropogenic sources. The results of this study would provide a useful aid for sustainable marine management in the region.     

Spatio-temporal variations of organic carbon and chlorophyll degradation products in the surficial sediments of Izmir Bay (Aegean Sea/Turkey)

The aim of this research is to determine the effects of Izmir Big Channel Waste Water Treatment Project on the sediment quality of Izmir Bay. Wastewater treatment improves the water quality. However, sediment does not respond to this treatment as fast as water column. Monitoring of bottom water and sediment quality is necessary for identification of the recovery of the whole ecosystem. For this purpose, bottom water and sediment samples were collected from three stations which are located in the middle and inner parts of the Izmir Bay on a monthly basis between January 2003 and December 2003. Values measured at stations ranged between; 0.54-12.82 microg/L for chlorophyll-a, 0.09-9.32 microg/L for phaeopigment, 0.05-1.91 mg/L for particulate organic carbon in bottom waters, 11.88-100.29 microg/g for chlorophyll degradation products and 1.12-5.39% for organic carbon in sediment samples. In conclusion, it was found that grazing activity explained carbon variations in sediment at station 2, but at station 1 and station 3 carbon variations in sediment were not related to autochthonous biological processes.     

Environmental assessment of polycyclic aromatic hydrocarbons in the surface sediments of a remote region on the eastern coast,Taiwan

Surface sediment samples were collected in He-Ping Harbor and the nearby He-Ping Estuary from 2005 to 2006 to examine spatial and temporal variability in polycyclic aromatic hydrocarbon (PAH) concentrations. The sum of the 16 USEPA priority pollutant PAHs varied from 8 to 312 ng/g dry weight, which was relatively low compared to values obtained from other studies in the world. Regarding temporal changes in the PAH profile, total PAH concentrations in the wet season were lower than during the dry season in He-Ping Harbor. However, the concentration of PAHs exhibited no significant difference in the four seasons in the He-Ping Estuary. PAH concentrations in He-Ping Harbor were higher than those in the He-Ping Estuary. In comparison with sediment quality guidelines, PAH concentrations of sediments in this study were lower than those outlined in the criteria, which suggests no evident adverse biological effects due to PAHs around the He-Ping coast. Ratios of specific PAH compounds calculated to assess the possible sources of PAHs reflect that PAHs in He-Ping Harbor may mainly be from pyrogenic coal combustion.     

Metal pollution and ecological risk assessment in marine sediments of Karachi Coast, Pakistan

Concentrations of 12 metals (Fe, Mn, Cr, Mo, Ni, Pb, Se, Sr, U, V, Zn, and Zr) in surface sediments of Karachi Coast, Pakistan were determined to evaluate their distribution and pollution assessment. The measured metals in the sediments were found to be in the range of Fe, 0.84–6.96 %; Mn, 300–1,300 μg/g; Cr, 12.0–319.84 μg/g; Mo, 0.49–2.03 μg/g; Ni, 1.53–58.86 μg/g; Pb, 9.0–49.46 μg/g; Se, 0.25–.86 μg/g; Sr, 192–1185 μg/g; U, 0.19–1.66 μg/g; V, 15.80–118.20 μg/g; Zn, 15.60–666.28 μg/g; and Zr, 44.02–175.26 μg/g. The mean contents of the metal studied were: Fe, 3.07 %, Mn, 0.05 %; Cr, 96.75 μg/g; Mo, 1.34 μg/g; Ni, 31.39 μg/g; Pb, 23.24 μg/g; Se, 0.61 μg/g; Sr, 374.83 μg/g; U, 0.64 μg/g; V, 61.75 μg/g; Zn, 204.75 μg/g; and Zr:76.27 μg/g, and arrangement of the metals from higher to lower mean content in this area is: Fe?>?Zn?>?Mn?>?Sr?>?Zn?>?Cr?>?Zr?>?V?>?Ni?>?Pb?>?Mo?>?U?>?Se. There is no significant correlation among most of these metals, indicating different anthropogenic and natural sources. To assess ecotoxic potential of marine sediments, Numerical Sediment Quality Guidelines were also applied. The concentration of Pb in all the sediments except one was lower than the threshold effect concentration (TECs) showing that there are no harmful effects to marine life from Pb. On the other hand, the concentrations of Cr, Ni, and Zn exceeded TEC in three stations, indicating their potential risk. The degree of pollution in sediments for metals was assessed by calculating enrichment factor (EF) and pollution load index (PLI). The results indicated that sediments of Layari River Mouth Area, Fish Harbour, and KPT Boat Building Area are highly enriched with Cr and Zn (EF?>?5). Sediments of Layari River Outfall Zone were moderately enriched with Ni and Pb (EF?>?2). The pollution load index was found in the range of 0.98 to 1.34. Lower values of PLI (≤1) at most of sampling locations imply no appreciable input from anthropogenic sources. However, relatively higher PLI values (>1) at Layari River Mouth Area, Fish Harbour, and KPT Boat Building Area are attributed to increased human activity in the area.     

Source and risk assessment of PCBs in sediments of Fenhe reservoir and watershed, China

The concentrations of polychlorinated biphenyls (PCBs) in sediments from the Fenhe reservoir and watershed were detected at 28 sites in wet and dry seasons. The ∑(123)PCBs ranged from n.d. to 126.49 ng g(-1) dw. The dominated congeners were tri-PCBs (34.29%) and tetra-PCBs (24.05%). In the Fenhe reservoir, ∑(123)PCBs presented a decreasing trend, while percentages of low chlorinated congeners showed an increasing trend. For the temporal variations, PCBs homologues profiles of sediment samples and spatial distribution of ∑(123)PCBs for the two periods were similar (with CD = 0.021 and r(2) = 0.999 respectively), although PCBs concentrations in the wet season were significantly higher than in the dry season. PCA was applied to analyze the possible sources for PCBs, suggesting that PCBs might be mainly influenced by Aroclor 1016 and 1242. Compared with 3 established sediment quality guidelines, levels of PCBs in sediments of the investigated watershed might have a potential biological impact, especially in the wet season.     

Metal pollution records in core sediments of some Red Sea coastal areas, Kingdom of Saudi Arabia

In the last three decades, the industrial and human activities in the coastal area of Saudi Arabia have increased dramatically and resulted in the continuous invasion of different types of pollutants including heavy metals. Seven sediment cores were collected from three major industrialized areas; Jeddah, Rabigh and Yanbu, along the coast of Saudi Arabia to determine the spatial and temporal distribution of metals and to assess the magnitude of pollution and their potential biological effects. Sediments were analyzed for texture, calcium carbonate contents, organic matter and metals (Al, Fe, Mn, Cd, Cr, Cu, Ni, Pb and Zn). Some metals like, Cr, Mn, Ni and Zn, were enriched in the upper 15 cm of core samples (recent deposition of sediments). Cadmium concentrations showed high fluctuations with depth and reverse pattern to that for Al, Fe and Mn which indicated land based sources of this element to the studied areas. Elevated concentrations of lead were recorded in the bottom layers of cores in Jeddah that indicated the most dramatic increase in usage of gasoline in early 1970s. The calculated contamination factors (CF's) were found in the following sequences: Cd > Pb > Ni > Cu > Zn > Cr > Mn for all studied areas. Results of Pollution Load Index (PLI) revealed that Jeddah is the most polluted area, followed by Rabigh while Yanbu is the least contaminated area. Except for Ni, the concentrations of most metals in the majority of sediment samples were believed to be safe for living organisms. As no data were available on the concentration of metals in core sediments in the coastal area of Saudi Arabia, the results of this study would serve as a baseline against which future anthropogenic effects can be assessed.     

Mercury in the sediments of Vembanad Lake,western coast of India

Mercury, a global pollutant, is popping up in places where it was never expected before and it burdens in sediments and other non-biological materials. It is estimated to have increased up to five times the pre-human level due to anthropogenic activities. Vembanad backwaters, one of the largest Ramsar site in India, which have extraordinary importance for its hydrological function, are now considered as one of the mercury hot spots in India. In this study, surface sediment samples of Vembanad Lake and nearshore areas have been seasonally analysed for total mercury and methyl mercury concentrations while the core sediment samples were analysed for total mercury. The results showed that the northern part of the lake was more contaminated with mercury than the southern part. The mercury concentration was relatively high in the subsurface sediment samples, indicating the possibility of historic industrial mercury deposition. A decreasing trend in the mercury level towards the surface in the core sediment was also observed. The geochemical parameters were also analysed to understand the sediment mercury chemistry. Anoxic conditions, pH and organic carbon, sulphur and Fe determined the presence of various species of mercury in the sediments of Vembanad Lake. The prevailing physical and geochemical conditions in Vembanad Lake have indicated the chances of chemical transformation of mercury and the potential hazard if the deposited mercury fractions are remobilised.     

Use of Sediment Quality Guidelines and pollution indicators for the assessment of heavy metal and PAH contamination in Greek surficial sea and lake sediments

Eight different surface sediment samples (K1–K8) were collected from two separate areas of Lake Koumoundourou and two samples (E1 and E2) from one area of Elefsis Bay, Athens, Greece. The level of pollution attributed to heavy metals was evaluated using several pollution indicators. Degree of Contamination, Modified Contamination Degree and Geoaccumulation Indexes were applied in order to determine and assess the anthropogenic contribution of the selected six elements (Cr, Ni, Cu, Zn, As and Pb). Moreover, the adverse effects of the sediments to aquatic organisms, from both heavy metals and polycyclic aromatic hydrocarbons (PAHs), were determined by using Sediment Quality Guidelines. The results indicated that Lake Koumoundourou is contaminated with heavy metals in a moderate degree and almost 50 % of the sediments are associated with frequent observation of adverse effects, when it comes to Ni and occasional observation of adverse effects, when it comes to Cu, Zn and Pb. As far as PAHs are concerned, around 60 % of the samples can be occasionally associated to toxic biological effects according to the effect-range classification for phenanthrene, benzo(a)anthracene, chrysene and pyrene. Finally, samples taken from the north side of the lake are more contaminated with PAHs than the ones taken from the east side probably due to the existence of the water barrier which acts as a reservoir of PAHs.