Bioavailability of PAHs in the Biobio river (Chile): MFO activity and biliary fluorescence in juvenile Oncorhynchus mykiss.

Cytochrome P450-dependent monooxygenase (MFO) activity and levels of bile PAH metabolites were measured in fish (Oncorhynchus mykiss) exposed to Biobio river (Chile) water. Experiments were performed simultaneously in both the field and laboratory to investigate whether the river water contained notable bioavailable PAH fractions. The field experiment was conducted using fish caged for 41 days at La Mochita (Biobio river mouth) whereas the laboratory experiment involved a 21-day exposure treatment with water collected in the same area. Induction of hepatic MFO, assayed by benzo(a)pyrene monooxygenase activity (BaPMO), and levels of PAH metabolites in the bile were measured in groups of eight (field experiment) and four specimens (laboratory experiment) sampled after 5, 10, 21 and 41 days of exposure. BaPMO was induced by a factor of 23 and 25 in fish caged for 21 and 41 days, respectively. Likewise, a significant BaPMO induction was found in the fish group experimentally exposed to river water for 21 days. Biliary fluorescence measurements, recorded by fixed wavelength fluorescence (FF) and synchronous fluorescence spectroscopy (SFS), revealed significantly high levels of PAH metabolites in bile samples of fish caged for 21 and 41 days. A positive relationship was found between BaPMO activity and biliary PAH metabolites. This study provides evidences that (i) Biobio river water contains a significant bioavailable PAH fraction in terms of marked effects on fish and (ii) the biological indicators MFO activity and bile PAH metabolites represent an excellent screening methodology to assess PAH exposure.     

Ultraviolet and chlorine disinfection of mycobacterium in wastewater: effect of aggregation.

Mycobacteria naturally aggregate in water, a characteristic that may serve to protect them against disinfection in wastewater. Secondary effluent was spiked with Mycobacterium terrae (M. terrae), sequentially filtered through 100-, 41-, and 20-microm nylon filters to partition aggregate sizes, confirmed using particle-size analysis and microscopy. Each sample was exposed to doses of UV light (10 to 60 mJ/cm2 at 254 nm) and free chlorine (27 to 150 mg-min/L at 4 degrees C). Inactivation of M. terrae in wastewater was initially rapid, with 2.5 log reduction at 14 mJ/cm2 and 56 mg-min/L for UV and free chlorine, respectively. However, in effluent and 100-microm filtered wastewater, spiked M. terrae was present to the highest doses evaluated. Interestingly, M. terrae passed through 41- and 20-microm filters were inactivated rapidly, with no survivors after moderate disinfection doses. Inactivation of Mycobacteria in wastewater may be compromised by aggregates larger than 41 microns.     

Improvement of DOC removal by multi-stage AOP-biological treatment

The single and multi-stages advanced oxidation process (AOP)-biological treatments were evaluated to apply for drinking water treatment, especially for the water containing less susceptible dissolved organic carbon (DOC) to ozone, comparing with the ozonation-biological treatment. Minaga reservoir water and the secondary effluent from a Municipal wastewater treatment plant were used as dissolved organic matter (DOM) solutions. DOC removals after 60 min AOP-biological treatment were 62% and 41% in the Minaga reservoir water and the secondary effluent, respectively, whereas those in the ozonation-biological treatment only 40% and 15% of DOC were removed, respectively. The result indicated that the single-stage AOP-biological treatment could improve DOC removal in comparison with the single-stage ozonation-biological treatment. This is because the AOP mineralized both biodegradable dissolved organic carbon (BDOC) produced in the early stage of oxidation and non-biodegradable dissolved organic carbon (NBDOC), whereas only BDOC was mineralized by further ozonation and NBDOC was not oxidized in the ozonation-biological treatment. The multi-stage treatment could not improve DOC removal in comparison with the single-stage treatment in the ozonation-biological treatment for the secondary effluent containing less susceptible DOC to ozone. However, the multi-stage AOP-biological treatment significantly reduced DOC and achieved 71% of DOC removal by 4 times repetition of 15 min oxidation, whereas DOC removal was 41% in the single-stage AOP-biological treatment for the same oxidation time. The improvement of DOC removal by the multi-stage AOP-biological treatment was due to BDOC removal as a radical scavenger by subsequent biological treatment in the early stage of oxidation and direct mineralization in the latter stage of oxidation.     

Occurrence and risk evaluation of organophosphorus pesticides in typical water bodies of Beijing,China

Environmental Science and Pollution Research - Abstract Human activities, particularly in large cities, can lead to pollution caused by micropollutants such as pesticides in water bodies, which...     

Human intake fractions of pesticides via greenhouse tomato consumption: comparing model estimates with measurements for Captan

Human intake due to pesticide residues in food commodities can be much higher than those related to water consumption and air inhalation, stressing the importance to correctly estimate pesticide uptake into plants and predict subsequent intake by humans. We calculated the human intake fraction of captan via tomato consumption taking into account the time between pesticide application and harvest, the time between harvest and consumption, the absorption of spray deposit on plant surfaces, transfer properties through the cuticle, degradation inside the plant and loss due to food processing. Human population intake fractions due to ingestion were calculated for complete, washed and peeled tomatoes. The calculated intake fractions were compared with measurements derived from an experimental setup in a Mediterranean greenhouse. The fraction of captan applied in the greenhouse as plant treatment that eventually is ingested by the human population is on average 10(-2)-10(-5), depending on the time between pesticide application and ingestion of tomatoes and the processing step considered. Model and experimentally derived intake fractions deviated less than a factor of 2 for complete and washed tomatoes and a factor of 3 for peeled tomatoes. Intake fractions due to air inhalation and consumption of drinking water are expected to be significantly lower (5-9 orders of magnitude) than those induced by the intake of tomatoes in this case study.     

Assessment of the environmental fate and effects of the PPARgamma receptor agonist, pioglitazone

The environmental fate and effects of pioglitazone prescribed for the treatment of type 2 diabetes were evaluated in an environmental risk assessment following the European Medicines Agency (EMA) "Guideline on the Environmental Risk Assessment of Medicinal Products for Human Use"; EMEA/CHMP/SWP/4447/00. A predicted environment concentration (PEC) for surface water was estimated at 0.023μgL(-1), (action limit of 0.01μgL(-1)) triggering a comprehensive battery of laboratory evaluations. Pioglitazone and its major metabolites were determined not to significantly adsorb to sewage solids, were not persistent in the aquatic environment, did not bioaccumulate and were non-toxic to aquatic organisms. Pioglitazone does not pose an unacceptable risk to groundwater supplies, with concentrations not anticipated to be a risk to aquatic organisms or human drinking water supplies. Pioglitazone does not pose a risk of secondary poisoning.     

Biodegradation of chlorinated solvents in a water unsaturated topsoil

In order to investigate topsoils as potential sinks for chlorinated solvents from the atmosphere, the degradation of trichloromethane (CHCl(3)), 1,1,1-trichloroethane (CH(3)CCl(3)), tetrachloromethane (CCl(4)), trichloroethene (C(2)HCl(3)) and tetrachloroethene (C(2)Cl(4)) was studied in anoxic laboratory experiments designed to simulate denitrifying conditions in water unsaturated topsoil. Active denitrification was demonstrated by measuring the release of 15N in N(2) to the headspace from added 15N labeled nitrate. The degradation of chlorinated aliphatic compounds was followed by measuring their concentrations in the headspace above the soil.The headspace concentrations of all the chlorinated solvents except CH(3)CCl(3) were significantly (P相似文献   

Photocatalytic degradation of isoproturon herbicide over TiO2/Al-MCM-41 composite systems using solar light

The present investigation covers immobilization of TiO2 using a simple solid state dispersion technique over mesoporous Al-MCM-41 support for the treatment of isoproturon herbicide. Catalysts are characterized by XRD, X-ray photo electron spectroscopy (XPS), surface area, UV-Vis diffused reflectance spectra (DRS), SEM and TEM. A detailed photocatalytic degradation study of isoproturon under solar light in aqueous suspensions is reported. The 10 wt% TiO2/Al-MCM-41 composite system found to be optimum with high degradation activity. The reaction follows pseudo-first order kinetics. The parameters like TiO2 loading over Al-MCM-41, amount of catalyst, concentration of substrate, pH effect, durability of the catalyst, activity comparison of TiO2 and Al-MCM-41 supported system are studied. The mineralization of isoproturon is monitored by TOC. Based on the degradation products detected through LC-MS, a plausible degradation mechanism is proposed. The data indicates that TiO2/Al-MCM-41 composite system is an effective photocatalyst for treatment of isoproturon in contaminated water.     

Physiopathology and effectiveness of therapeutic vaccines against human papillomavirus

Environmental Science and Pollution Research - Human papillomavirus (HPV) is a well-known sexually transmitted disorder globally. Human papillomavirus (HPV) is the 3rd most common cancer that...     

填料表面亲水改性对MBBR处理船舶生活污水的影响

为研究填料表面亲水改性对移动床生物膜反应器(MBBR)处理废水的影响,考察了氧化处理、酸处理和碱处理3种亲水改性方法所得不同聚丙烯K1型填料(水的液面接触角分别为41°、62°和75°,未处理填料为87°)对模拟船舶生活污水的处理效果。结果表明,亲水性越强,挂膜量越多,膜结构越致密。在亲水性较低的情况下,挂膜量是限制污水处理的主要因素,亲水性越强污水处理效果越好;在亲水性较高的情况下,膜结构成为污水处理的限制因素,亲水性增强对水处理有不利影响。比较不同亲水性填料的污水处理结果可知,表面酸处理所得接触角为62°的填料污水处理效果相对最好,COD和氨氮的平均去除率分别为87%和61%;其次依次为液面接触角41°、75°和87°的填料。     

Short-term effects of metals on the filtration rate of the zebra mussel Dreissena polymorpha

In order to study the short-term ecotoxicity of metals to the freshwater mussel Dreissena polymorpha, the effects of Cu, Zn and Cd on the filtration rate of this mussel were determined in laboratory experiments. Filtration rate was chosen as the endpoint, because it is a sensitive sublethal parameter compared to mortality and it is an important parameter given the ecological role D. polymorpha fulfills. The filtration rate was calculated from the decrease in algal concentration, fed to mussels in aquaria, containing different metal concentrations. The EC50 for Cu (41 microg litre(-1)) was lower than for Cd (388 microg litre(-1)) and Zn (1350 microg litre(-1)). The NOEC(accumulation) for the essential metal Zn was higher than for the essential metal Cu. Cadmium, a non-essential metal, was accumulated at all elevated water concentrations, so the NOEC(accumulation) was the concentration in the control water (<0.2 microg litre(-1)). All (no) effect concentrations found in this study were above the quality criteria set for metal concentrations in Dutch surface water, suggesting that the zebra mussel is sufficiently protected by these quality criteria.     

Biostimulation and bioaugmentation enhances aerobic biodegradation of dichloroethenes

The accumulation of dichloroethenes (DCEs) as dominant products of microbial reductive dechlorination activity in soil and water represent a significant obstacle to the application of bioremediation as a remedial option for chloroethenes in many contaminated systems. In this study, the effects of biostimulation and/or bioaugmentation on the biodegradation of cis- and trans-DCE in soil and water samples collected from contaminated sites in South Africa were evaluated in order to determine the possible bioremediation option for these compounds in the contaminated sites. Results from this study indicate that cis- and trans-DCE were readily degraded to varying degrees by natural microbial populations in all the soil and water samples tested, with up to 44% of cis-DCE and 41% of trans-DCE degraded in the untreated soil and water samples in two weeks. The degradation rate constants ranged significantly (P<0.05) between 0.0938 and 0.560 wk(-1) and 0.182 and 0.401 wk(-1), for cis- and trans-DCE, respectively, for the various treatments employed. A combination of biostimulation and bioaugmentation significantly increased the biodegradation of both compounds within two weeks; 14% for cis-DCE and 18% for trans-DCE degradation, above those observed in untreated soil and water samples. These findings support the use of a combination of biostimulation and bioaugmentation for the efficient biodegradation of these compounds in contaminated soil and water. In addition, the results clearly demonstrate that while naturally occurring microorganisms are capable of aerobic biodegradation of cis- and trans-DCE, biotransformation may be affected by several factors, including isomer structure, soil type, and the amount of nutrients available in the water and soil.     

Effective uptake of decontaminating agent (citric acid) from aqueous solution by mesoporous and microporous materials: an adsorption process

The presence of citric acid in decontamination waste can cause complexation of the radioactive cations resulting in interferences in their removal by various treatment processes such as chemical precipitation, ion-exchange, etc., which are employed for the removal of radioactivity and may cause potential danger to the environment. Mesoporous Al-MCM-41 (Si/Al=30, 51, 72 and 97) and Si-MCM-41 molecular sieves were synthesized hydrothermally and characterized by XRD, BET (surface area) and FT-IR to evaluate the removal of citric acid through an adsorption process. Adsorption of citric acid over Al-MCM-41 shows the applicability of Freundlich and Langmuir isotherm and follows first order kinetics. The effects of contact time, concentration of citric acid, adsorbents (various Si/Al ratios of Al-MCM-41, Si-MCM-41, Hbeta zeolite and commercial carbon) and pH have been investigated. It has been found that the amount of citric acid adsorbed per unit gram of catalyst followed the order Al-MCM-41 (Si/Al=30)>Al-MCM-41 (Si/Al=51)>activated charcoal>Al-MCM-41 (Si/Al=72)>Al-MCM-41 (Si/Al=97)>Si-MCM-41>Hbeta zeolite.     

Method development for determination of fluroxypyr in water

Improved methods for extraction and clean up of fluroxypyr residue in water have been established. Two methods of fluroxypyr extraction were used, namely, Direct Measurement of fluroxypyr and Concentration of fluroxypyr onto A Solid Phase Extraction (SPE) Adsorbent, followed by elution with solvent before determination of fluroxypyr. The recovery for Direct Measurement of fluroxypyr in water containing 8-100 microg L(-1), ranged from 86 to 110% with relative standard deviation of 0.7 to 2.15%. For the second method, three types of SPE were used, viz. C18, C18 end-capped and polyvinyl dibenzene (ISOLUTE ENV+). The procedure involved concentrating the analyte from fluroxypyr-spiked water at pH 3, followed by elution of the analyte with 4 mL of acentonitrile. The recovery of fluroxypyr from the spiked sample at 1 to 50 microg L(-1) after eluting through either C18 or C18 end-capped ranged from 40-64% (with relative standard deviation of 0.7 to 2.15) and 41-65% (with standard deviation of 1.52 to 11.9). The use of ISOLUTE ENV+, gave better results than the C18, C18 end-capped or the Direct Measurement Methods. The recovery and standard deviation of fluroxypyr from spiked water using ISOLUTE ENV+ ranged from 91-102% and 2.5 to 5.3, respectively.     

Presence of microbial and chemical source tracking markers in roof-harvested rainwater and catchment systems for the detection of fecal contamination

Microbial source tracking (MST) and chemical source tracking (CST) markers were utilized to identify fecal contamination in harvested rainwater and gutter debris samples. Throughout the sampling period, Bacteroides HF183 was detected in 57.5 % of the tank water samples and 95 % of the gutter debris samples, while adenovirus was detected in 42.5 and 52.5 % of the tank water and gutter debris samples, respectively. Human adenovirus was then detected at levels ranging from below the detection limit to 316 and 1253 genome copies/μL in the tank water and debris samples, respectively. Results for the CST markers showed that salicylic acid (average 4.62 μg/L) was the most prevalent marker (100 %) in the gutter debris samples, caffeine (average 18.0 μg/L) was the most prevalent in the tank water samples (100 %) and acetaminophen was detected sporadically throughout the study period. Bacteroides HF183 and salicylic acid (95 %) and Bacteroides HF183 and caffeine (80 %) yielded high concurrence frequencies in the gutter debris samples. In addition, the highest concurrence frequency in the tank water samples was observed for Bacteroides HF183 and caffeine (60 %). The current study thus indicates that Bacteroides HF183, salicylic acid and caffeine may potentially be applied as source tracking markers in rainwater catchment systems in order to supplement fecal indicator analyses.     

Adsorption of basic dyes onto MCM-41

The adsorption of two basic dyes, Basic Green 5 (BG5) and Basic Violet 10 (BV10), onto MCM-41 was studied to examine the possible effect of interactions between large adsorbates and MCM-41 on the pore structure stability of MCM-41 and the potential of MCM-41 for the removal of basic dyes from wastewater. The revolutions of surface characteristics and pore structure of MCM-41 induced by dyes adsorption were characterized based on the analyses of the nitrogen isotherms, the XRD patterns, and the FTIR spectra. It was experimentally concluded that when the effect of interactions between large dyes (such as BV10) and MCM-41 on the pore structure stability of MCM-41 was insignificant, MCM-41 might be a good adsorbent for the removal of basic dyes from wastewater. The adsorption of BV10 on MCM-41 with respect to contact time, pH, and temperature was then measured to provide more information about the adsorption characteristics of MCM-41. Both Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the pseudo-second-order kinetic model was used to describe the kinetic data, from which some adsorption thermodynamic parameters were also evaluated.     

Evaluation of new surfactant expanded zirconium and titanium phosphates for polycyclic aromatic hydrocarbons extraction from waters

A newly synthesized family of materials prepared with surfactant as organic template were tested for the extraction of polycyclic aromatic hydrocarbons (PAHs) from water, using pyrene (Pyr) and benzo[a]pyrene (B[a]P) as PAHs representatives. Particular attention was paid to the evaluation of the recovery factors with dichloromethane as eluent in order to estimate their potential as adsorbing solid phases for PAH remediation or analysis. Eleven lamellar MCM-50 type materials incorporating n-alkyl- (n = 12, 16, 18) trimethylammonium bromide molecules with different concentrations and chain lengths and two hexagonal MCM-41 type materials incorporating octadecyl-trimethyl ammonium bromide were tested. Best results were obtained by preparing lamellar MCM-50 zirconium and titanium phosphates in the presence of n-dodecyl-trimethylammonium at a relative molar concentration (surfactant/phosphate) of 1.     

Polycyclic aromatic hydrocarbons in rainwater and surface waters of Lake Maggiore, a subalpine lake in Northern Italy

Fourteen polycyclic aromatic hydrocarbons (PAHs) were measured in surface waters and precipitation inputs to Lake Maggiore, a subalpine lake in Northern Italy, from July 2003 to January 2004. Particulate and dissolved phases in surface water and rain samples were determined. Analyses of PAHs were performed using XAD-2 resin to isolate the dissolved PAHs and subsequent extraction by accelerated solvent extraction (ASE). Both the dissolved and particulate phase PAH patterns in surface water and rainwater samples were dominated by the low molecular weight compounds (e.g., phenanthrene, fluoranthene and pyrene). More than 85% of PAHs in surface waters and 72% of PAHs in rainwater were associated to the dissolved phase. The SigmaPAH concentrations in surface waters (particulate and dissolved phases) were 0.584 +/- 0.033 ng l(-1), 2.9 +/- 0.312 ng l(-1) and in rainwater (particulate and dissolved phases) 27.5 +/- 2 ng l(-1), 75.4 +/- 9 ng l(-1), respectively. Temporal variability of PAH concentrations in rain and surface water samples were observed, with higher concentrations in November and December, coinciding with the largest precipitation amounts. The comparison of PAH signatures in rainwater and surface waters seems to indicate that wet deposition (2.5-41 microg m(-2) month(-1)) is the main source of PAH contamination into surface waters of Lake Maggiore.     

PFOS and PFC releases and associated pollution from a PFC production plant in Minnesota (USA)

Perfluorooctane sulfonate (PFOS) and PFOS-related substances have been listed as persistent organic pollutants in the Stockholm Convention. From August 2012, Parties to the Convention needed to address the use, storage, and disposal of PFOS—including production sites and sites where PFOS wastes have been deposited—in their national implementation plans. The paper describes the pollution in Minnesota (USA) caused by the 3M Company at one of the largest per/polyfluorinated chemical (PFC) production facilities. From early 1950s until the end of 2002, when 3M terminated PFOS and perfluorooctanoic acid (PFOA) production, PFOS, PFOA, and other PFC production wastes were disposed around the plant and in local disposal sites. Discharges from the site and releases from deposits caused widespread contamination of ground and surface waters including local drinking water wells. Fish in the river downstream were contaminated with PFOS to levels that led to fish consumption advisories. Human exposures resulted from ingesting contaminated drinking water, requiring installation of water treatment facilities and alternate water supplies. The critical evaluation of the assessments done revealed a range of gaps in particular of human exposure where relevant exposure pathways including the entire exposure via food have not been taken into consideration. Currently, the exposure assessment of vulnerable groups such as children or Hmong minorities is inadequate and needs to be improved/validated by epidemiological studies. The assessment methodology described for this site may serve—with highlighted improvements—as a model for assessment of other PFOS/PFC production sites in the Stockholm Convention implementation.     

The organic precursors affecting the formation of disinfection by-products with chlorine dioxide

The object of this research was to study the formation of disinfection by-products by using chlorine dioxide (ClO2) as a disinfectant reacting with different properties of organic substance in natural aquatic environment. The adsorbent resin (XAD-4, XAD-7) was used to divide the organic matters in raw water into three groups. The influence of the function groups on structure, reaction tendency, and formation of disinfection by-products generated by the reaction of these organic substances with chlorine dioxide was explored. The experimental results show that the three different organic groups formed using adsorbent resin were hydrophobic substance, hydrophilic acid, and non-acid hydrophilics in proportions of 43%, 41%, and 16%, respectively. Within the raw water in our study, the hydrophilic substance had a higher distribution proportion than that described in general articles and journals, which indicates that this water was contaminated with pollution from human beings. The exploration of the reactivity of the three different organic substances with chlorine dioxide shows that the unit consumption of disinfection agent per unit organic matters (represented by ClO2/DOC) is in the following sequence hydrophobic substance > hydrophilic substance > non-acid hydrophilics. It indicated that larger molecular organic precursors had larger consumption of disinfectant. We also discovered that after the reaction of the three different organic substances with chlorine dioxide, the largest amount of disinfection by-products were generated by the non-acid hydrophilics.