Combined application of non-discriminated conventional pyrolysis and tetramethylammonium hydroxide-induced thermochemolysis for the characterization of the molecular structure of humic acid isolated from polluted sediments from the Ravenna Lagoon

Humic acid (HA) isolated from highly polluted sediment from the Ravenna Lagoon (Italy) was subjected to pyrolysis/tetramethylammonium hydroxide (TMAH)-induced thermochemolysis to reveal the impact of industrial activities on humification. Special effort was made to distinguish between analytes originating from the polymeric humic organic matter network along with sequestered compounds (which cannot be released by solvent extraction), and the solvent-extractable lipid fraction sorbed onto the organic matrix. Exhaustive solvent extraction of the isolated HA proved mandatory to avoid biased results when identifying the origin of the pyrolyzates of untreated samples. Conventional pyrolysis at 750 degrees C of the "degreased" HA revealed a characteristic polycyclic aromatic hydrocarbon (PAH) pattern, which was significantly different than patterns obtained from the pyrolysis of natural humic acids. TMAH-induced thermochemolysis at 500 degrees C provided information on carboxylic acids covalently bound inside the HA network via ester bonds. Thermochemolysis of the "degreased" matrix at 750 degrees C, resulting in the cleavage of C-O and C-C bonds, revealed a significant PAH pattern very similar to that obtained by conventional pyrolysis. The uncommon PAH pattern points to the formation of bound residues as the humification/detoxification pathway. Recalcitrant hopane hydrocarbons showed very similar patterns for both the untreated and exhaustively solvent-extracted samples, which points to hopanes being linked inside the humic network via C-C bonds. The technique of non-discriminating flash pyrolysis used in this study, based on extremely rapid capacitive discharge heating in a Silcosteel capillary, proved to be an excellent method to obtain high-boiling pyrolyzates (PAHs beyond 252Da molecular weight, C(29)-C(31)-hopanes).     

Distribution and sources of polycyclic aromatic hydrocarbons from urban to rural soils: a case study in Dalian, China

To estimate the distribution and sources of soil polycyclic aromatic hydrocarbons (PAHs) in metropolitan and adjacent areas, soil samples were collected from urban, suburban and rural locations of Dalian, China, and concentrations of 14 PAHs were determined. The spatial PAH profiles were site-specific and determined by the sources close to the sampling sites. PAH concentrations decreased significantly along the urban-suburban-rural transect. The gradient implied that the fractionation effect influenced PAH distribution. Bivariate plots of selected diagnostic ratios showed general trends of co-variation and allowed to distinguish samples taken from different areas. An improved method, factor analysis (FA) with nonnegative constrains, was used to determine the primary sources and contributions of PAHs in soils. The FA model showed traffic average (74%) and coal related residential emission (26%) were two primary sources to Dalian soils. In addition, the FA model provided reasonable explanations for PAH contributions in soils from different sites. The results suggest that FA with nonnegative constraints is a promising tool for source apportionment of PAHs in soils.     

Influence of soil organic matter on the leaching of polycyclic aromatic hydrocarbons in soil

Polycyclic aromatic hydrocarbons (PAHs) are one of the main classes of contaminants in the terrestrial environment. Aside from total organic carbon, the ratio among the different organic matter fractions [dissolved organic matter, fulvic acid (FA), humic acid (HA) and humin] can also affect the mobility of these hydrocarbons in soils. In this study the effect of the whole organic carbon pool has been compared with that of HA and FA on the translocation of four PAHs (biphenyl, fluorene, phenanthrene and pyrene) in soil columns. Oxidized and untreated soil columns with and without HA or FA, were prepared, spilled with hydrocarbons and leached with a 0.01 M CaCl2 solution. The influence of HA and FA on PAH translocation was investigated through determinations of the PAH contents and total organic carbon (TOC) in the layers of the columns. All molecules were moved vertically by the percolating solutions, their concentrations decreasing with depths. The nonoxidized soil tended to retain more PAHs (96%) than the oxidized one (60%), confirming that organic matter plays an important role in controlling PAH leaching. The whole organic matter pool reduced the translocation of pollutants downward the profile. The addition of HA enhanced this behaviour by increasing the PAH retention in the top layers (7.55 mg and 4.00 mg in the top two layers, respectively) while FA increased their mobility (only 2.30 and 2.90 mg of PAHs were found in the top layers) and favoured leaching. In fact, in the presence of HA alone, the higher amounts of PAHs retained at the surface and the good correlation (r2=0.936) between TOC and hydrocarbon distribution can be attributed to a parallel distribution of PAHs and HA, while in the presence of FA, the higher mobility of PAHs can be attributed to the high mobility of the humic material, as expected by its extensive hydrophilic characteristics.     

INFLUENCE OF SOIL ORGANIC MATTER ON THE LEACHING OF POLYCYCLIC AROMATIC HYDROCARBONS IN SOIL

Polycyclic aromatic hydrocarbons (PAHs) are one of the main classes of contaminants in the terrestrial environment. Aside from total organic carbon, the ratio among the different organic matter fractions [dissolved organic matter, fulvic acid (FA), humic acid (HA) and humin] can also affect the mobility of these hydrocarbons in soils. In this study the effect of the whole organic carbon pool has been compared with that of HA and FA on the translocation of four PAHs (biphenyl, fluorene, phenanthrene and pyrene) in soil columns. Oxidized and untreated soil columns with and without HA or FA, were prepared, spilled with hydrocarbons and leached with a 0.01 M CaCl₂ solution. The influence of HA and FA on PAH translocation was investigated through determinations of the PAH contents and total organic carbon (TOC) in the layers of the columns. All molecules were moved vertically by the percolating solutions, their concentrations decreasing with depths. The non-oxidized soil tended to retain more PAHs (96%) than the oxidized one (60%), confirming that organic matter plays an important role in controlling PAH leaching. The whole organic matter pool reduced the translocation of pollutants downward the profile. The addition of HA enhanced this behaviour, by increasing the PAH retention in the top layers (7.55 mg and 4.00 mg in the top two layers, respectively) while FA increased their mobility (only 2.30 and 2.90 mg of PAHs were found in the top layers) and favoured leaching. In fact, in the presence of HA alone, the higher amounts of PAHs retained at the surface and the good correlation (r²=0.936) between TOC and hydrocarbon distribution can be attributed to a parallel distribution of PAHs and HA, while in the presence of FA, the higher mobility of PAHs can be attributed to the high mobility of the humic material, as expected by its extensive hydrophilic characteristics.     

Impact of soil organic matter on the distribution of polycyclic aromatic hydrocarbons (PAHs) in soils

The knowledge on the distribution of hydrophobic organic contaminants in soils can provide better understanding for their fate in the environment. In the present study, the n-butanol extraction and humic fractionation were applied to investigate the impact of SOM on the distribution of polycyclic aromatic hydrocarbons (PAHs). The results indicated that 80.5%-94.8% of the target PAHs could be extracted by n-butanol and 63.1%-94.6% of PAHs were associated with fulvic acid (FA). Concentrations of un-extracted PAHs increased significantly with the increasing soil organic matter (SOM), however, such an association was absent for the extractable fractions. The results suggested that the sequestration played a critical role in the accumulation of PAHs in soils. SOM also retarded the diffusion of PAHs into the humin fractions. It implied that sequestration in SOM was critical for PAH distribution in soils, while the properties of PAH compounds also had great influences.     

Effect of condensed organic matter on solvent extraction and aqueous leaching of polycyclic aromatic hydrocarbons in soils and sediments

The contents of nonhydrolyzable organic matter (NHC) and black carbon (BC) were measured in soils and sediments from the Pearl River Delta, South China. Polycyclic aromatic hydrocarbons (PAHs) were extracted respectively by Soxhlet and an accelerated solvent extraction device (ASE) using different solvents. In addition, sequential aqueous leaching at different temperatures was carried out. The PAH content extracted with the sequential three solvent ASE is two times higher than that using the Soxhlet extraction method. The relationship of the PAH content with the NHC content is very significant. The PAH concentrations measured at various temperature steps fit well to the Van't Hoff equation and the enthalpy was estimated. The investigation indicates that condensed organic matter such as kerogen carbon, aged organic matter, and BC is relevant for the extraction and distribution of native PAHs in the investigated field soils and sediments.     

Effects of fulvic acid concentration and origin on photodegradation of polycyclic aromatic hydrocarbons in aqueous solution: Importance of active oxygen

With an Xe arc lamp house as simulated sunlight, the influences of fulvic acid (FA) concentration and origins on photodegradation of acenaphthene, fluorine, phenanthrene, fluoranthene and pyrene in aqueous solution have been studied. Similar effects of FAs, collected from five places around China, on polycyclic aromatic hydrocarbon (PAH) photodegradation have been observed. Active oxygen was of significance in PAH photodegradation with the presence of FAs. For systems with 1.25 mg L⁻¹ FAs, the contributions of OH to PAH photodegradation rates were from 33% to 69%. FAs had two opposite effects, i.e., stimulating the generation of active oxygen and advancing PAH photodegradation; competing with PAHs for energy and photons and restraining PAH photodegradation. Generally, photodegradation rates of the 5 PAHs decreased with the increase of FAs concentration; except fluoranthene and pyrene were advanced in solutions with low FA concentration. The influences of FA concentration on PAH photodegradation were more significant than FA origin.     

Historical record and sources of polycyclic aromatic hydrocarbons in core sediments from the Yangtze Estuary, China

Polycyclic aromatic hydrocarbons (PAHs) in a sediment core taken from intertidal flat in the Yangtze Estuary were determined by gas chromatography-mass spectrometry. The results indicate that the total concentration of PAHs ranged from 0.08 to 11.74 microg/g. The concentration levels of total and individual PAHs changed dramatically with depth. The concentrations of PAHs were relatively high above 35 cm depth and remained constantly low below this depth. The historical record of PAHs in the core shows subsurface maximum (one or more peak values), followed by decreased levels to the surface and with depth. And, PAH sediment record in the core profile is in agreement with historically sewage discharge events during the 1980s to 1990s. The distribution of target molecule acenephthene, the fluoranthene/pyrene ratio, the proportion of 2-3-ring and 4-5-ring PAHs, and alkylated naphthalene to parent naphthalene in the core profile show that the sources in this area are characterized by petroleum-derived PAH contamination (mainly sewage discharge and the river runoff) and the incorporation of atmospheric inputs. Studies indicate the PAH profile pattern in this site in comparison with other regions appear to reflect its particular local position (near the sewage outlet). Moreover, physico-chemical conditions and sedimentation rate as well as biodegradation also affect the PAH concentration levels in the core sediments.     

Partitioning and source diagnostics of polycyclic aromatic hydrocarbons in rivers in Tianjin, China

Water, suspended particulate matter (SPM), and sediment samples were collected from ten rivers in Tianjin and analyzed for 16 polycyclic aromatic hydrocarbons (PAHs), dissolved organic carbon (DOC), particulate organic carbon (POC) in SPM and total organic carbon (TOC) in sediment. The behavior and fate of PAHs influenced by these parameters were examined. Generally, organic carbon was the primary factor controlling the behavior of the 16 PAH species. Partitioning of PAHs between SPM and water phase was studied, and K(OC) for some PAH species were found to be significantly higher than the predicted values. The source of PAHs contamination was diagnosed by using PAH isomer ratios. Coal combustion was identified to be a long-term and prevailing contamination source for sediment, while sewage/wastewater source could reasonably explain a short-term PAHs contamination of SPM.     

Source apportionment of atmospheric polycyclic aromatic hydrocarbons (PAHs) in Palm Beach County,Florida

Due to concerns about adverse health effects associated with inhalation of atmospheric polycyclic aromatic hydrocarbons (PAHs), 30 ambient air samples were obtained at an air quality monitoring station in Palm Beach County, Florida, from March 2013 to March 2014. The ambient PAH concentration measurements and fractional emission rates of known sources were incorporated into a chemical mass balance model, CMB8.2, developed by EPA, to apportion contributions of three major PAH sources including preharvest sugarcane burning, mobile vehicles, and wildland fires. Strong association between the number of benzene rings and source contribution was found, and mobile vehicles were identified to be the prevailing source (contribution ≥56%) for the observed PAHs concentration with lower molecular weights (four or fewer benzene rings) throughout the year. Preharvest sugarcane burning was the primary contributing source for PAHs with relatively higher molecular weights (five or more benzene rings) during the sugarcane burning season (from October to May of the next year). Source contribution of wildland fires varied among PAH compounds but was consistently lower than for sugarcane burning during the sugarcane harvest season. Determining the major sources responsible for ground-level PAHs serves as a tool to improving management strategies for PAH emitting sources and a step toward better protection of the health of residents in terms of exposure to PAHs. The results obtain insight into temporal dominance of PAH polluting sources for those residential areas located near sugarcane burning facilities and have implications beyond Palm Beach County, in areas with high concerns of PAHs and their linked sources.

Implications: Source apportionment of atmospheric polycyclic hydrocarbons (PAHs) in Palm Beach County, Florida, meant to estimate contributions of major sources in PAH concentrations measured at Belle Glade City of Palm Beach County. Number of benzene rings was found to be the key parameter in determining the source with the prevailing contribution. Mobile vehicle sources showed a higher contribution for species with four or fewer benzene rings, whereas sugarcane burning contributed more for species with five or more benzene rings. Results from this study encourage more control for sugarcane burns and help to better manage authorization of the sugarcane burning incidents and more restrictive transportation plans to limit PAH emissions from mobile vehicles.     

PAH deposition to snow surface

The urban snowpack effectively acts as a collection device for atmospheric-deposited PAHs. When these PAHs are flushed out in a short time interval along with springtime snowmelt, these cause shockloading to receiving waters. In order to assess the PAH deposition and accumulation in urban snowpacks, a deposition survey of PAH for the winter months of 1991-92 from the city of Sault Ste. Marie, Ontario, Canada was undertaken. The results of the survey are interpreted in view of prevailing meteorology and various emission sources in the study area. The relative PAH deposition levels (to BaP) are compared with relative source emission fingerprints to examine consistency in sampling and analysis. While analyzing the PAH samples using the ASTM (1987) method, the problem of concentration levels being below the detection level was encountered. The ASTM method for PAH analysis was modified to enhance the detection limit of the PAHs by concentrating the PAH extract to very low volumes, on the order of 200-300 microL.     

AhR agonist and genotoxicant bioavailability in a PAH-contaminated soil undergoing biological treatment

Background, aim, and scope  Degradation of the 16 US EPA priority PAHs in soil subjected to bioremediation is often achieved. However, the PAH loss is not always followed by a reduction in soil toxicity. For instance, bioanalytical testing of such soil using the chemical-activated luciferase gene expression (CALUX) assay, measuring the combined effect of all Ah receptor (AhR) activating compounds, occasionally indicates that the loss of PAHs does not correlate with the loss of Ah receptor-active compounds in the soil. In addition, standard PAH analysis does not address the issue of total toxicant bioavailability in bioremediated soil. Materials and methods  To address these questions, we have used the CALUX AhR agonist bioassay and the Comet genotoxicity bioassay with RTL-W1 cells to evaluate the toxic potential of different extracts from a PAH-contaminated soil undergoing large-scale bioremediation. The extracts were also chemically analyzed for PAH16 and PCDD/PCDF. Soil sampled on five occasions between day 0 and day 274 of biological treatment was shaken with n-butanol with vortex mixing at room temperature to determine the bioavailable fraction of contaminants. To establish total concentrations, parts of the same samples were extracted using an accelerated solvent extractor (ASE) with toluene at 100°C. The extracts were tested as inducers of AhR-dependent luciferase activity in the CALUX assay and for DNA breakage potential in the Comet bioassay. Results  The chemical analysis of the toluene extracts indicated slow degradation rates and the CALUX assay indicated high levels of AhR agonists in the same extracts. Compared to day 0, the bioavailable fractions showed no decrease in AhR agonist activity during the treatment but rather an up-going trend, which was supported by increasing levels of PAHs and an increased effect in the Comet bioassay after 274 days. The bio-TEQs calculated using the CALUX assay were higher than the TEQs calculated from chemical analysis in both extracts, indicating that there are additional toxic PAHs in both extracts that are not included in the chemically derived TEQ. Discussion  The response in the CALUX and the Comet bioassays as well as the chemical analysis indicate that the soil might be more toxic to organisms living in soil after 274 days of treatment than in the untreated soil, due to the release of previously sorbed PAHs and possibly also metabolic formation of novel toxicants. Conclusions  Our results put focus on the issue of slow degradation rates and bioavailability of PAHs during large-scale bioremediation treatments. The release of sorbed PAHs at the investigated PAH-contaminated site seemed to be faster than the degradation rate, which demonstrates the importance of considering the bioavailable fraction of contaminants during a bioremediation process. Recommendations and perspectives  It has to be ensured that soft remediation methods like biodegradation or the natural remediation approach do not result in the mobilization of toxic compounds including more mobile degradation products. For PAH-contaminated sites this cannot be assured merely by monitoring the 16 target PAHs. The combined use of a battery of biotests for different types of PAH effects such as the CALUX and the Comet assay together with bioavailability extraction methods may be a useful screening tool of bioremediation processes of PAH-contaminated soil and contribute to a more accurate risk assessment. If the bioremediation causes a release of bound PAHs that are left undegraded in an easily extracted fraction, the soil may be more toxic to organisms living in the soil as a result of the treatment. A prolonged treatment time may be one way to reduce the risk of remaining mobile PAHs. In critical cases, the remediation concept might have to be changed to ex situ remediation methods.     

Polycyclic aromatic hydrocarbons (PAH) in top soil, leachate and groundwater from Ruseifa solid waste landfill, Jordan

The distribution profiles and pathways of polynuclear aromatic hydrocarbons in the surroundings of Ruseifa landfill area in Jordan were investigated for surface sediments, leachate, and groundwater. The total concentration of 16 polycyclic aromatic hydrocarbons (PAHs) in sediments ranged from 286 to 1704 ppm with an average value of 751 ppm. Meanwhile, concentrations of PAH in groundwater ranged between 7.1 and 12.6 ppm with an average value of 9.1 ppm. The PAH in leachate varied between 0.10 and 0.40 with an average value of 0.29 ppm. The overall PAH distribution profiles appeared to be similar for leachate and groundwater dominated by 2–3 rings system molecules. While, the sediments profile was dominated by 4–6 rings system molecules which indicated the loss of low molecular weight compounds of PAH and accumulation of higher molecular weight of PAH under prevailing semiarid and hot climatic conditions.     

Distribution of polycyclic aromatic hydrocarbons in the sediments of the Adriatic Sea

Distribution of the sixteen polycyclic aromatic hydrocarbons (PAHs) indicated from USEPA as priority pollutants was studied in surface sediments of two coastal areas of the Adriatic Sea. PAHs were recovered from the sediments by solvent extraction and then analyzed by means of gas chromatography-mass spectrometry. Total concentrations of the analytes in the range 24.1-501.1 ng/g were detected. The observed distribution has been discussed taking into account different aspects, such as the fluvial inputs and the grain size of the sediments. By using a molecular marker approach and characteristic compositional patterns it was possible to ascribe to combustion processes the main source of PAHs. Furthermore a good correlation between benzo[a]pyrene and the total concentration of PAHs (r=0.953) has been pointed out.     

Dissolution and removal of PAHs from a contaminated soil using sunflower oil

This study reports on the feasibility of remediation of polycyclic aromatic hydrocarbon (PAH) contaminated soils using sunflower oil, an environmentally-friendly solvent. Batch experiments were performed to test the influence of oil/soil ratio on the remediation of PAH contaminated soil, and to test the mass transfer behaviors of PAHs from soil to oil. An empirical model was employed to describe the kinetics of PAH dissolution and to predict equilibrium concentrations of PAHs in oil. PAH containing oil was regenerated using active carbon. Results show that dissolution of PAHs from a Manufactured Gas Plant (MGP) soil at oil/soil ratios of one or two were almost the same. Nearly all PAHs (81-100%) could be removed by sunflower oil dissolution. Mass transfer coefficients for low molecular PAHs namely fluoranthene, phenanthrene and anthracene were one or two orders of magnitude higher than those for high molecular PAHs with 4-6 rings. Ninety milliliters of PAH containing oil could be regenerated by 10 g active carbon in a batch reactor. Such a remediation procedure indicates that sunflower oil is a promising agent for the removal of PAHs from MGP soils. However, further research is required before the method can be used for in situ remediation of contaminated sites.     

Characterization of carbonaceous combustion residues: II. Nonpolar organic compounds

Aromatic and aliphatic fractions of black carbon (BC) solvent extracts were examined by gas chromatography/mass spectrometry to determine how differences in broad chemical and physical features are correlated with the load, composition, "extractability" and bioavailability of organic compounds. Diesel soot, urban dust and chimney soot had concentrations of n-alkanes >20 microg/g and of carcinogenic polycyclic aromatic hydrocarbons (PAHs)>8 microg/g. These high levels of solvent-extractable compounds were interpreted as resulting from combustion at temperatures below optimum values for BC formation. PAH concentrations normalized to the amount of soot carbon in chimney soot were close to values for diesel soot. However, the high proportion of polar amorphous organic matter in chimney soot suggests a higher bioavailability for associated PAHs. Carbon black, vegetation fire residues, and straw and wood charcoals had only residual concentrations of n-alkanes (<9 microg/g) and PAHs (<0.2 microg/g). PAH distributions were mostly unspecific, while the overall signature of the aliphatic fraction varied with BC origin. Molecular markers among plant-derived BC included steroid and sesquiterpenoid hydrocarbons. Molecular fingerprints suggest that compounds associated with fossil BC might be more refractory than those associated with plant-derived BC.     

Removal of carotene-like colored compounds by liquid-liquid extraction during polycyclic aromatic hydrocarbons analysis of plant tissue

Plants contain a wide variety of chemicals, some of which may have similar chromatographic behavior to polycyclic aromatic hydrocarbons (PAHs). During solid phase extraction (SPE) with Si-gel for instance, the co-elution of carotene-like colored compounds with PAHs has been observed. In this paper, liquid–liquid extraction was applied for the separation and subsequent analysis of PAHs from plant extracts. PAHs containing 2–6 rings, which include naphthalene, phenanthrene, pyrene, benzo[a]pyrene and benzo[ghi]perylene, were used as representative target chemicals. Carotene-like compounds extracted from Komatsuna (Brassica campestris) shoot by acetone followed by Si-gel treatment were incorporated as undesired components in the model matrix. Results showed the feasibility of employing either acetonitrile or 2% (w/v) KOH–methanol as solvents for high PAHs recovery and low extraction of colored fraction. For acetonitrile, 86.9–93.5% of each PAH could be recovered after three extraction cycles (relative standard deviation, RSD < 1.6%) with only about 10% co-extraction of colored fraction. For 2% KOH–methanol, PAHs recoveries ranging from 79.3% to 83.1% after five cycles (RSD < 1.5%) were achieved while the percent extraction of colored fraction was also low at 10%. The relatively higher selectivity of the solvents for PAHs over the colored fraction as well as the solubility of the matrix solution in the solvent may have contributed to these results. On this basis, liquid–liquid extraction is very useful for the pre-treatment of plant extracts for PAHs analysis.     

Polycyclic aromatic hydrocarbons in suspended particulate matter and sediments from the Pearl River Estuary and adjacent coastal areas, China

The spatial distribution, composition, and sources of polycyclic aromatic hydrocarbons (PAHs) in sediments and suspended particulate matter (SPM) from the Pearl River Estuary and adjacent coastal areas were examined. Total PAH concentrations varied from 189 to 637 ng/g in sediments and 422 to 1,850 ng/g in SPM. PAHs were dominated by 5,6-ring compounds in sediments and by 2,3-ring compounds in SPM samples. Assessment of PAH sources suggested that biomass and coal combustion is the major PAH source to the outer part of the estuary sediments and that petroleum combustion is the major PAH source to the inner part of estuary sediments. As for SPM samples, PAH isomer pair ratios indicated multiple (petroleum, petroleum combustion, and biomass and coal combustion) PAH sources, and significant temporal variations could exist for the sources of water column PAHs in the study area. The distribution of perylene in SPM samples indicated that the river was the dominant source of perylene in SPM and that perylene could be taken as an index to assess the contribution of river inflow to the total PAHs in SPM samples. The high concentration of perylene in the sediment was indicative of an in situ biogenic origin.     

Contamination of polycyclic aromatic hydrocarbons in surface sediments of mangrove swamps

The concentrations of total polycyclic aromatic hydrocarbons (sigmaPAHs) and 15 individual PAH compounds in 20 surface sediments collected from four mangrove swamps in Hong Kong were analysed. sigmaPAH concentrations ranged from 356 to 11,098 ng g(-1) dry weight with mean and median values of 1992 and 1,142 ng g(-1), respectively. These values were significantly higher than those of marine bottom sediments of Hong Kong harbours, suggesting that more PAHs were accumulated in mangrove surface sediments. The concentrations of sigmaPAHs as well as individual PAH compound varied significantly among mangrove swamps. The swamps heavily polluted by livestock and industrial sewage, such as Ho Chung and Mai Po, had much higher concentrations of total PAHs and individual PAH than the other swamps. The PAH profiles were similar among four mangrove swamps, and were dominated by naphthalene (two-ring PAH), fluorene and phenanthrene (three-ring PAH). The mangrove sediments had higher percentages of low-molecular-weight PAHs. These indicated that PAHs in mangrove sediments might originate from oil or sewage contamination (petrogenic input). Ratio values of specific PAH compounds such as phenanthrene/anthracene and fluoranthene/ pyrene, were calculated to evaluate the possible source of PAH contamination in mangrove sediments. These ratios varied among samples, suggesting that mangrove sediments might have a mixed pattern of pyrolytic and petrogenic inputs of PAHs. Sediments collected from Ho Chung mangrove swamp appeared to be more dominated by pyrolytic input while those from Tolo showed strong petrogenic contamination.     

Induction of the P450 reporter gene system bioassay by polycyclic aromatic hydrocarbons in Ulsan Bay (South Korea) sediments

Polycyclic aromatic hydrocarbons (PAHs) and induction of the P450 reporter gene system (RGS) for 6- and 16-h exposure periods were determined in organic extracts of Ulsan Bay (South Korea) sediments to assess the utility of this bioassay as a screening tool for PAH contamination. The sum of the concentrations of 23 individual PAHs in 30 sediment samples (sigma PAH) based on GC-MS analysis ranged from 0.05 to 6.1 micrograms/g dry wt. P450 RGS fold induction ranged from 4.0 to 320 micrograms/g based on benzo[a]pyrene toxic equivalents (BaPEq). P450 RGS BaPEq and the 'chemical BaPEq', defined as the sum of the products of individual PAH concentrations and pre-determined toxic equivalency factors, exhibited very strong positive correlations with sigma PAH (r2 > 0.90; P < 0.001). Fold induction did not increase (and in some cases decreased) after the optimal incubation period (6 h) for PAHs, indicating that other compounds known to induce the P450 RGS (e.g. chlorinated organics) were not present at levels effecting significant induction. This was supported by GC-ECD analysis where non-ortho and mono-ortho polychlorinated biphenyls (PCBs) known to be strong P450 RGS inducers were found to be at very low or non-detectable levels in samples with the highest P450 RGS responses. The profound difference in PAH profiles for the two most contaminated sites suggested that this assay is especially sensitive for selected PAHs with greater than four rings. Combined with previous results, the P450 RGS shows promise as a useful screening tool for predicting deleterious biological effects resulting from CYP1A1-inducing, sediment-associated chemicals, particularly high molecular weight PAHs.