蓖麻油衍生微乳液对菲的增溶和洗脱作用及其对菲污染土壤的修复机理

比较研究了蓖麻油硫酸盐(SCOS)与普通表面活性剂Triton X-100(TX100)、Tween 80(TW80)、Brij35、十二烷基苯磺酸钠(SDBS)和十二烷基硫酸钠(SDS)等对菲的增溶和洗脱作用.结果表明,菲表观溶解度与SCOS的浓度呈单一线性关系,SCOS微乳液对菲的增溶比SR=0.0314为最大,菲在微乳相和水相之间的分配系数logKem=4.44,大于菲在胶束相和水相之间的分配系数(logKmc).1:10土-水体系下,SCOS微乳液对菲污染土壤的清洗速率最快,清洗效率最高.SCOS有望成为土壤有机污染淋洗修复的增效试剂.     

Effect of metals on the adsorption and extractability of 14C-phenanthrene in soils

The fate of polycyclic aromatic hydrocarbons (PAHs) in contaminated soils may be affected by several environmental factors including the presence of co-contaminants. This study was conducted in order to assess the effect of metals on (i) the adsorption of 14C-phenanthrene in soils and (ii) its extractability and ability to form non-extractable residues. The first objective was accomplished using batch adsorption experiments with an uncontaminated agricultural soil spiked with the metals Cd, Cu, Pb, and Zn. Adsorption of phenanthrene was significantly higher after the addition of the metals (Kf = 21.48 vs. 8.55) and the desorption less readily reversible when compared to the unspiked soil. The extractability of phenanthrene was assessed with incubation (4 months, laboratory conditions) and microlysimeter experiments (6 months, natural climatic conditions) on three soils spiked with metals. All the soils were labelled with 14C-phenanthrene. The amount of extractable phenanthrene residues was significantly higher when the metals had been added to the soils. Nevertheless, the quantity of non-extractable residues was non-significantly different between the spiked and unspiked soils. The mechanism leading to increased adsorption and extractability of phenanthrene in the presence of metals is still unknown. In perspective, it would be interesting to assess the bioavailability of PAHs in the presence of metals in further experiments.     

Enhanced desorption of phenanthrene from contaminated soil using anionic/nonionic mixed surfactant

A new approach using an anionic/nonionic mixed surfactant, sodium dodecyl sulphate (SDS) with Triton X-100 (TX100), was utilized for the desorption of phenanthrene from an artificial contaminated natural soil in an aim to improve the efficiency of surfactant remediation technology. The experimental results showed that the presence of SDS not only reduced the sorption of TX100 onto the natural soil, but also enhanced the solubilization of TX100 for phenanthrene, both of which resulted in the distribution of phenanthrene in soil-water systems decreasing with increasing mole fraction of SDS in surfactant solutions. These results can be attributed to the formation of mixed micelles in surfactant solution and the corresponding decrease in the critical micelle concentration of TX100 in mixed solution. The batch desorption experiments showed that the desorption percentage of phenanthrene from the contaminated soil with mixed solution was greater than that with single TX100 solution and appeared to be positively related to the mole fraction of SDS in surfactant solution. Thus, the anionic/nonionic mixed surfactants are more effective for the desorption of phenanthrene from the contaminated soil than a single nonionic surfactant.     

Biodegradation of phenanthrene in soil.

We investigated the potential of an aerobic polycyclic aromatic hydrocarbon (PAH)-adapted consortium to degrade phenanthrene in soil. Optimal degradation conditions were determined as pH7.0 and 30 degrees C with a water content of 100% wt soil/wt water (w/w). At a concentration of 5 microg/g, phenanthrene degradation (k1) was measured at 0.0269 l/hr with a half-life (t(1/2)) of 25.8 hrs. Our results show that the higher the phenanthrene concentration, the slower the degradation rates. Phenanthrene degradation was enhanced by treatment with yeast extract, glucose, or pyruvate, but was not significantly improved by the addition of acetate. Degradation was delayed by the addition of either compost or potassium nitrate and enhanced by the addition of nonionic surfactants (Brij30, Brij35, Triton X100 or Triton N101) at critical micelle concentration (CMC). Phenanthrene degradation was delayed at levels above CMC.     

Solubilization and biodegradation of phenanthrene in mixed anionic-nonionic surfactant solutions

The effects of mixed anionic-nonionic surfactants, sodium dodecyl sulfate (SDS) mixed with Tween80 (TW80), Triton X-100 (TX100) and Brij35 respectively on the solubility enhancement and biodegradation of phenanthrene in the aqueous phase were investigated. The efficiency of solubilization and biodegradation of phenanthrene in single-, and mixed-surfactant solutions were also compared. The critical micellar concentrations (CMCs) of mixed surfactants were sharply lower than that of sole SDS. The degree of solubility enhancements by the mixed surfactants followed the order of SDS-TW80>SDS-Brij35>SDS-TX100. Synergistic solubilization was observed in the mixed surfactant solutions, in which the molar ratios of SDS to nonionic surfactant were 1:0, 9:1, 7:3, 5:5, 3:7, 1:9 and 0:1 while the total concentration of surfactants was kept at 5.0 and 10.0 mM, respectively. SDS-Brij35 exhibited more significant degree of synergistic solubility enhancement for phenanthrene. The mixed surfactants exhibited no inhibitory effect on biodegradation of phenanthrene. Substantial amounts of the solubilized phenanthrene by mixed surfactants were completely degraded by phenanthrene-degrading microorganisms within 96 h. The results suggested that anionic-nonionic surfactants would improve the performance of remediation of PAH-contaminated soils.     

Solubilization properties of polycyclic aromatic hydrocarbons by saponin, a plant-derived biosurfactant

The enhanced solubilization of polycyclic aromatic hydrocarbons (PAHs) by saponin, a plant-derived non-ionic biosurfactant, was investigated. The results indicated that the solubilization capabilities of saponin for PAHs were greater than some representative synthetic non-ionic surfactants and showed strong dependence on solution pH and ionic strength. The molar solubilization ratio (MSR) of saponin for phenanthrene was about 3-6 times of those of the synthetic non-ionic surfactants, and decreased by about 70% with the increase of solution pH from 4.0 to 8.0, but increased by approximately 1 times with NaCl concentration increased from 0.01 to 1.0 M. Heavy metal ions can enhance saponin solubilization for phenanthrene and the corresponding MSR values increased by about 25% with the presence of 0.01 M of Cd²⁺ or Zn²⁺. Saponin is more effective in enhancing PAHs solubilization than synthetic non-ionic surfactants and has potential application in removing organic pollutants from contaminated soils.     

Biodegradation of polycyclic aromatic hydrocarbons by a mixed culture

We investigated the potential biodegradation of polycyclic aromatic hydrocarbons (PAHs) by an aerobic mixed culture utilizing phenanthrene as its carbon source. Following a 3-5 h post-treatment lag phase, complete degradation of 5 mg/l phenanthrene occurred within 28 h (optimal conditions determined as 30 degrees C and pH 7.0). Phenanthrene degradation was enhanced by the individual addition of yeast extract, acetate, glucose or pyruvate. Results show that the higher the phenanthrene concentration, the slower the degradation rate. While the mixed culture was also capable of efficiently degrading pyrene and acenaphthene, it failed to degrade anthracene and fluorene. In samples containing a mixture of the five PAHs, treatment with the aerobic culture increased degradation rates for fluorene and anthracene and decreased degradation rates for acenaphthene, phenanthrene and pyrene. Finally, it was observed that when nonionic surfactants were present at levels above critical micelle concentrations (CMCs), phenanthrene degradation was completely inhibited by the addition of Brij 30 and Brij 35, and delayed by the addition of Triton X100 and Triton N101.     

Induction of PAH-catabolism in mushroom compost and its use in the biodegradation of soil-associated phenanthrene

This paper describes the induction of phenanthrene-catabolism within Phase II mushroom compost resulting from its incubation with (1) phenanthrene, and (2) PAH-contaminated soil. Respirometers measuring mineralization of freshly added 14C-9-phenanthere were used to evaluate induction of phenanthrene-catabolism. Where pure phenanthrene (spiked at a concentration of 400 mg kg(-1) wet wt.) was used to induce phenanthrene-catabolism in compost, induction was measurable, with maximal mineralization observed after 7 weeks phenanthrene-compost contact time. Where PAH-contaminated soil was used to induce phenanthrene-catabolism in un-induced compost, induction was observed after 5 weeks soil-compost contact time. Microcosm-scale amelioration of soil contaminated with 14C-phenanthrene (aged in soil for 516 days prior to incubation with compost) indicated that both induced (using pure phenanthrene) and uninduced Phase II mushroom composts were equally able to promote degradation of this soil-associated contaminant. After 111 days incubation time, 42.7 +/- 6.3% loss of soil-associated phenanthrene was observed in the induced-compost soil mixture, while 36.7 +/- 2.9% loss of soil-associated phenanthrene was observed in the uninduced-compost soil mixture. These results are notable as they indicate that while pre-induction of phenanthrene-catabolism within compost is possible, it does not significantly increase the extent of degradation when the compost is used to ameliorate phenanthrene-contaminated soil. Thus, compost could be used directly in the amelioration of contaminated land i.e. without pre-induction of catabolism.     

Phenanthrene partitioning in sediment–surfactant–fresh/saline water systems

The objective of this study was to investigate the influence of salinity on the effectiveness of surfactants in the remediation of sediments contaminated with phenanthrene (PHE). This is an example of a more general application of surfactants in removing hydrophobic organic compounds (HOCs) from contaminated soil/sediment in saline environments via in-situ enhanced sorption or ex-situ soil washing. Salinity effects on surfactant micelle formation and PHE partitioning into solution surfactant micelles and sorbed surfactant were investigated. The critical micelle concentration of surfactants decreased, and PHE partition between surfactant micelles and water increased with increasing salinity. Carbon-normalized partition coefficients (K_ss) of PHE onto the sorbed cationic surfactant increased significantly with increasing salinity, which illustrates a more pronounced immobilization of PHE by cationic surfactant in a saline system. Reduction of PHE sorption by anionic surfactant was more pronounced in the saline system, indicating that the anionic surfactant has a higher soil washing effectiveness in saline systems.     

H NMR metabolomics of earthworm exposure to sub-lethal concentrations of phenanthrene in soil

¹H NMR metabolomics was used to monitor earthworm responses to sub-lethal (50-1500 mg/kg) phenanthrene exposure in soil. Total phenanthrene was analyzed via soxhlet extraction, bioavailable phenanthrene was estimated by hydroxypropyl-β-cyclodextrin (HPCD) and 1-butanol extractions and sorption to soil was assessed by batch equilibration. Bioavailable phenanthrene (HPCD-extracted) comprised ∼65-97% of total phenanthrene added to the soil. Principal component analysis (PCA) showed differences in responses between exposed earthworms and controls after 48 h exposure. The metabolites that varied with exposure included amino acids (isoleucine, alanine and glutamine) and maltose. PLS models indicated that earthworm response is positively correlated to both total phenanthrene concentration and bioavailable (HPCD-extracted) phenanthrene in a freshly spiked, unaged soil. These results show that metabolomics is a powerful, direct technique that may be used to monitor contaminant bioavailability and toxicity of sub-lethal concentrations of contaminants in the environment. These initial findings warrant further metabolomic studies with aged contaminated soils.     

Determination of hydrocarbons in old creosote contaminated soil using headspace solid phase microextraction and GC-MS.

Headspace solid phase microextraction (HS-SPME) has been used together with GC-MS to analyze organic substances directly in a soil, heavily contaminated with PAHs/creosote (approximately 300 mg/kg soil), from an old gaswork site in Stockholm, Sweden. The HS-SPME results, both qualitative and quantitative, were compared with traditional liquid extraction using ethyl acetate/hexane (20:80). It was shown that the concentrations determined with HS-SPME at 60 degrees C correlated well, for compounds containing up to two and three aromatic rings (naphthalenes, acenaphthene, acenaphthylene and fluorenes, while a lower concentration was obtained for phenanthrene, anthracene, fluoranthene and pyrene. The total concentrations for each compound determined with HS-SPME ranged from 2 to 25 microg/g soil. Quantification was done using standard addition of compounds directly to the soil samples. The bioavailable fraction of the compounds in the contaminated soil at 20 degrees C was analyzed using external calibration by spiking sterile uncontaminated sand (same texture and particle size as the contaminated soil but without a heavily sorbed organic fraction) with hydrocarbon standards in different concentrations. Storage of exposed fibers at 20 degrees C showed that analysis should be done within two days to make qualitative measurements and earlier (as soon as possible) for quantitative determinations.     

Influence of surfactant sorption on the removal of phenanthrene from contaminated soils

Laboratory column flushing experiments were conducted to remove phenanthrene from contaminated soils by Triton X-100 (TX100) with an aim to investigating the effect of surfactant sorption on the performance of surfactant-enhanced remediation process. The effluent concentration of phenanthrene from soil columns showed strong dependence on the sorption breakthrough curves of TX100. The removal of phenanthrene from contaminated soils was enhanced only when the sorption breakthrough of TX100 occurred and the influent concentration of TX100 was greater than the critical enhanced flushing concentration (CEFC). The sorption of surfactant onto soils and the subsequent partitioning of contaminants into soil-sorbed surfactant had a significant effect on the solute equilibrium distribution coefficient (KD) and thus the flushing efficiency for phenanthrene. A model was developed to predict KD and CEFC values for simulating the performance of surfactant-enhanced flushing for contaminated soils. These results are of practical interest in developing effective and safe surfactant-enhanced remediation technologies.     

Reducing plant uptake of PAHs by cationic surfactant-enhanced soil retention

Reducing the transfer of contaminants from soils to plants is a promising approach to produce safe agricultural products grown on contaminated soils. In this study, 0-400 mg/kg cetyltrimethylammonium bromide (CTMAB) and dodecylpyridinium bromide (DDPB) were separately utilized to enhance the sorption of PAHs onto soils, thereby reducing the transfer of PAHs from soil to soil solution and subsequently to plants. Concentrations of phenanthrene and pyrene in vegetables grown in contaminated soils treated with the cationic surfactants were lower than those grown in the surfactant-free control. The maximum reductions of phenanthrene and pyrene were 66% and 51% for chrysanthemum (Chrysanthemum coronarium L.), 62% and 71% for cabbage (Brassica campestris L.), and 34% and 53% for lettuce (Lactuca sativa L.), respectively. Considering the impacts of cationic surfactants on plant growth and soil microbial activity, CTMAB was more appropriate to employ, and the most effective dose was 100-200 mg/kg.     

Evaluation of bioremediation effectiveness on crude oil-contaminated sand

A treatability study was conducted using sea sand spiked with 3% or 6% (w/w) of Arabian light crude oil to determine the most effective bioremediation strategies for different levels of contamination. The sea sand used in the study was composed of gravel (0.1%), sand (89.0%), and silt and clay (10.9%). The water content of the sea sand was adjusted to 12.6% (w/w) for the study. Different combinations of the following treatments were applied to the sand in biometer flasks: the concentration of oil (3% or 6%), the concentration of a mixture of three oil-degrading microorganisms (Corynebacterium sp. IC-10, Sphingomonas sp. KH3-2 and Yarrowia sp. 180, 1x10(6) or 1x10(8) cells g-1 sand), the concentration of the surfactant Tween 80 (1 or 10 times the critical micelle concentration), and the addition of SRIF in a C:N:P ratio of 100:10:3. Three biometer flasks per combination of experimental conditions were incubated, and the performance of each treatment was examined by monitoring CO2 evolution, microbial activity, and oil degradation rate. The results suggest that the addition of inorganic nutrients accelerated the rate of CO2 evolution by a factor of 10. The application of oil-degrading microorganisms in a concentration greater than that of the indigenous population clearly increased biodegradation efficiency. The application of surfactant slightly enhanced the oil degradation rate in the contaminated sand treated with the higher concentration of oil-degrading microorganisms. The initial CO2 evolution rate was shown to efficiently evaluate the treatability test by providing significant data within a short period, which is critical for the rapid determination of the appropriate bioremediation approach. The measurements of microbial activity and crude oil degradation also confirmed the validity of the CO2 evolution rate as an appropriate criterion.     

Use of reporter-gene based bacteria to quantify phenanthrene biodegradation and toxicity in soil

A phenanthrene-degrading bacterium, Sphingomonas paucimobilis EPA505 was used to construct two fluorescence-based reporter strains. Strain D harboring gfp gene was constructed to generate green fluorescence when the strain started to biodegrade phenanthrene. Strain S possessing gef gene was designed to die once phenanthrene biodegradation was initiated and thus to lose green fluorescence when visualized by a live/dead cell staining. Confocal laser scanning microscopic observation followed by image analysis demonstrates that the fluorescence intensity generated by strain D increased and the intensity by strain S decreased linearly at the phenanthrene concentration of up to 200 mg/L. Such quantitative increase and decrease of fluorescence intensity in strain D (i.e., from 1 to 11.90 ± 0.72) and strain S (from 1 to 0.40 ± 0.07) were also evident in the presence of Ottawa sand spiked with the phenanthrene up to 1000 mg/kg. The potential use of the reporter strains in quantitatively determining biodegradable or toxic phenanthrene was discussed.     

Plant uptake, accumulation and translocation of phenanthrene and pyrene in soils

Uptake, accumulation and translocation of phenanthrene and pyrene by 12 plant species grown in various treated soils were comparatively investigated. Plant uptake and accumulation of phenanthrene and pyrene were correlated with their soil concentrations and plant compositions. Root or shoot accumulation of phenanthrene and pyrene in contaminated soils was elevated with the increase of their soil concentrations. Significantly positive correlations were shown between root concentrations or root concentration factors (RCFs) of phenanthrene and pyrene and root lipid contents. The RCFs of phenanthrene and pyrene for plants grown in contaminated soils with initial phenanthrene concentration of 133 mgkg(-1) and pyrene of 172 mgkg(-1) were 0.05-0.67 and 0.23-4.44, whereas the shoot concentration factors of these compounds were 0.006-0.12 and 0.004-0.12, respectively. For the same soil-plant treatment, shoot concentrations and concentration factors of phenanthrene and pyrene were generally much lower than root. Translocations of phenanthrene and pyrene from shoots to roots were undetectable. However, transport of these compounds from roots to shoots usually was the major pathway of shoot accumulation. Plant off-take of phenanthrene and pyrene only accounted for less than 0.01% of dissipation enhancement for phenanthrene and 0.24% for pyrene in planted versus unplanted control soils, whereas plant-promoted biodegradation was the predominant contribution of remediation enhancement of soil phenanthrene and pyrene in the presence of vegetation.     

Simultaneous removal of organic compounds and heavy metals from soils by electrokinetic remediation with a modified cyclodextrin

Thousands of sites are contaminated with both heavy metals and organic compounds and these sites pose a major threat to public health and the environment. Previous studies have shown that electrokinetic remediation has potential to remove heavy metals and organic compounds when they exist individually in low permeability soils. This paper presents the feasibility of using cyclodextrins in electrokinetic remediation for the simultaneous removal of heavy metals and polycyclic aromatic hydrocarbons (PAHs) from low permeability soils. Kaolin was selected as a model low permeability soil and it was spiked with phenanthrene as well as nickel at concentrations of 500 mg kg-1 each to simulate typical mixed field contamination. Bench-scale electrokinetic experiments were conducted using hydroxypropyl beta-cyclodextrin (HPCD) at low (1%) and high (10%) concentrations and using deionized water in control test. A periodic voltage gradient of 2VDC cm-1 (with 5 d on and 2 d off) was applied to all the tests, and 0.01 M NaOH was added during the experiments to maintain neutral pH conditions at anode. In all tests, nickel migrated as Ni2+ ions towards the cathode and most of it was precipitated as Ni(OH)2 within the soil close to the cathode due to high pH condition generated by electrolysis reaction. The solubility of phenanthrene in the flushing solution and the amount of electroosmotic flow controlled the migration and removal of phenanthrene in all the tests. Even though high flow was generated in tests using deionized water and 1% HPCD, migration and removal of phenanthrene was low due to low solubility of phenanthrene in these solutions. The test with 10% HPCD solution showed higher solubility of phenanthrene which caused it migrate towards the cathode, but further migration and removal was retarded due to reduced electric current and electroosmotic flow. Approximately one pore volume of flushing resulted in approximately 50% removal of phenanthrene from the soil near the anode. Sustained higher electroosmotic flow with higher concentration cyclodextrin and maintaining low soil pH near cathode should be investigated to increase removal efficiency of both phenanthrene and nickel.     

Effect of surfactants, dispersion and temperature on solubility and biodegradation of phenanthrene in aqueous media

In the present study surfactant addition with the help of either a mechanical dispersion or a thermal treatment was applied in order to increase the solubility and the bioavailability of phenanthrene in aqueous media, and therefore to promote its biodegradation. Among four tested surfactants (Tween 80, Brij 30, sodium dodecyl sulphate and rhamnolipids), Brij 30 (0.5 gL(-1)) showed the best results allowing us to attain about 20 mgL(-1) of soluble phenanthrene. An additional thermal treatment at 60°C for 24h, 200 rpm permitted to increase the solubility of phenanthrene in the presence of Brij 30 (0.5 gL(-1)) to about 30 mgL(-1). Higher dispersions of phenanthrene particles as well as the reduction of their size were obtained using Ultra-Turrax and French press. The biodegradation of phenanthrene by Pseudomonas putida was then investigated. The reduction of size of phenanthrene particles by mechanical dispersion did not influence its biodegradation, suggesting that P. putida consumed only soluble phenanthrene. The addition of Brij 30 (0.5 gL(-1)) permitted to obtain more phenanthrene metabolized. The use of Brij 30 coupled with a transitory heating of phenanthrene-containing medium at 60°C led to an even more complete biodegradation. This might be a promising way to enhance biodegradation of PAHs.     

Soil remediation: humic acids as natural surfactants in the washings of highly contaminated soils

The remediation of the highly contaminated site around the former chemical plant of ACNA (near Savona) in Northern Italy is a top priority in Italy. The aim of the present work was to contribute in finding innovative and environmental-friendly technology to remediate soils from the ACNA contaminated site. Two soils sampled from the ACNA site (A and B), differing in texture and amount and type of organic contaminants, were subjected to soil washings by comparing the removal efficiency of water, two synthetic surfactants, sodium dodecylsulphate (SDS) and Triton X-100 (TX100), and a solution of a natural surfactant, a humic acid (HA) at its critical micelle concentration (CMC). The extraction of pollutants by sonication and soxhlet was conducted before and after the soil washings. Soil A was richer in polycyclic aromatic hydrocarbons, whereas soil B had a larger content of thiophenes. Sonication resulted more analytically efficient in the fine-textured soil B. The coarse-textured soil A was extracted with a general equal efficiency also by soxhlet. Clean-up by water was unable to exhaustively remove contaminants from the two soils, whereas all the organic surfactants revealed very similar efficiencies (up to 90%) in the removal of the contaminants from the soils. Hence, the use of solutions of natural HAs appears as a better choice for soil washings of highly polluted soils due to their additional capacity to promote microbial activity, in contrast to synthetic surfactants, for a further natural attenuation in washed soils.     

Simultaneous removal of phenanthrene and cadmium from contaminated soils by saponin, a plant-derived biosurfactant

Batch experiments were conducted to evaluate the performance of saponin, a plant-derived biosurfactant, for simultaneously removing phenanthrene and cadmium from the combined contaminated soils. Results showed that phenanthrene was desorbed from the contaminated soils by saponin with the partition of phenanthrene into surfactant micelle, meanwhile cadmium was effectively removed from the contaminated soils by the complexation of cadmium with the external carboxyl groups of saponin micelle. The efficiencies of saponin for the removal of phenanthrene and cadmium from the contaminated soils were greater than that of Triton X100 and citric acid, respectively. At concentration of 3750 mg/L, saponin has a removal rate of 87.7% and 76.2% of cadmium and phenanthrene, respectively, from the combined contaminated soil. The removals of cadmium and phenanthrene from the soils were not obviously constrained each other. Thus, saponin has the potential for the removal of heavy metal and PAHs from the combined contaminated soils.