A phycocyanin probe as a tool for monitoring cyanobacteria in freshwater bodies

In many countries, the presence of cyanobacteria in freshwater bodies used for both drinking water and recreational purposes is under increasing public health attention. Water managers are considering how to implement monitoring that leads to a minimization of the risks incurred by the users of potentially contaminated sites. To address this question, this study involved assessing the performance of a submersible probe for measuring phycocyanin-specific fluorescence as a function of cyanobacterial biomass, with the aim of applying it as a tool for surveillance management. Its advantages and limits compared to more traditional analyses are discussed. The monitoring of cyanobacteria in the water bodies of western France was carried out using a minifluorimeter specific to the fluorescence of phycocyanin, a pigment specific to cyanobacteria. The results are compared with the analyses recommended by the World Health Organisation (chlorophyll a and cell counting). This study based on nearly 800 samples shows a significant correlation between the phycocyanin content and the cyanobacterial biomass, expressed as the number of cells per mL (R2 = 0.73). This submersible probe is simple and rapid to use, making it possible to take into account horizontal and vertical heterogeneities in the proliferation growth. In this way, we are able to detect at an early stage the conditions that could potentially lead to a risk, in order to start sampling. Due to its sensitivity, this tool proves suitable for monitoring aimed at reducing the risks incurred by the users of contaminated sites and launching preventative actions. The use of the phycocyanin probe provides an effective tool to complement traditional analyses of cyanobacterial presence. It is suggested that a surveillance protocol based on phycocyanin concentration can significantly improved the accuracy of the extent of cyanobacterial bloom development in the light of spatial and temporal variabilities associated with these occurrences.     

Utilization of the water quality index method as a classification tool

The study comprised modification of the Canadian Council of Ministers of the Environment (CCME) Water Quality Index (CCMEWQI) to obtain a tool in classification of surface waters according to quality defined by the European Legislation—75/440/EEC. Three categories were proposed, and the category ranges of CCMEWQI have been modified depending on the objective chosen. The application of the CCMEWQI with modified categorization scheme was demonstrated to assess overall water quality by integrating observed water quality determinants in the Kucuk Menderes Basin, Turkey. In this scope, the samples analyzed for pH, total dissolved solids (TDS), chlorides (Cl), nitrate–nitrogen (NO₃–N), dissolved oxygen (DO), biochemical oxygen demand (BOD₅), sulfate (SO₄), and boron (B), variables taken monthly over 2 years from the five monitoring sites, were processed. Results revealed that the overall surface water mainly fell within the A2 water class. The CCMEWQI with modified categorization scheme is believed to assist water managers to integrate and interpret the picture of overall water quality based on the European legislation concerning the quality required of surface water intended for the abstraction of drinking water in the Member States (75/440/EEC).     

Roadmap for assessing regional trends in groundwater quality

Assessing regional trends in groundwater quality can be a difficult task. Data are often scattered in space and time, and the inertia of groundwater systems can create natural, seemingly persistent changes in concentration that are difficult to separate from anthropogenic trends. Here, we show how statistical methods and software for joint analysis of multiple time series can be integrated into a roadmap for trend analysis and critical examination of data quality. Ordinary and partial Mann–Kendall (MK) tests for monotonic trends and semiparametric smoothers for multiple time series constitute the cornerstones of our procedure. The MK tests include a simple and easily implemented method to correct for serial dependence, and the associated software is designed to enable convenient handling of numerous data series and to accommodate covariates and nondetects. The semiparametric smoothers are intended to facilitate detection of synchronous changes in a network of stations. A study of Swedish groundwater quality data revealed true upward trends in acid-neutralizing capacity and downward trends in sulfate but also a misleading shift in alkalinity level that would have been difficult to detect if the time series had been analyzed separately.     

Multivariate cluster analysis as a versatile tool for the quality assessment of short chain chloroparaffin quantification in environmental samples

The compositions of commercially available solutions of short chain chlorinated paraffins (SCCP) and technical mixtures were determined by high resolution gas chromatography (HRGC) electron capture negative ionisation (ECNI) combined with low resolution mass spectrometry (LRMS). Differences and similarities in the relative distribution of congeners and homologues were investigated by cluster analysis. Samples could be separated into two groups/clusters with similar molecular mass, chlorination degree and congener pattern. With the exception of one sample, the use of CH4-ECNI-MS led to an overestimation of the chlorine content. Moreover, the influence of different SCCP mixtures on the quantification was studied. The results showed that small differences in the chlorine content could sometimes cause substantial systematic errors of up to 119% despite similar homologue and congener patterns. Errors of quantification corresponded to the deviations between response factors of sample and standard. As a consequence SCCPs should be quantified with a standard matching the overall response factor of the sample.     

Network design factors for assessing temporal variability in ground-water quality

Benchmark major ions and nutrients data were collected biweekly for about two years at 12 wells at two sites in a shallow sand and gravel aquifer in west-central Illinois. The purpose of the study was to explore the time series properties of ground-water quality data collected at a relatively high sampling frequency. A secondary purpose was to determine the relative magnitudes of natural and sampling-related sources of variance in ground-water quality time series. The absence of this kind of information has severely hindered the design of ground-water sampling programs in the past.An autocorrelation analysis showed that the median sampling frequency for which the predicted ratio of effective independent sample size to total sample size was 0.5 (50% sampling redundancy) ranged from 6 to 14 samples per year. For a predicted ratio of effective independent sample size to total sample size of 0.9 (10% sampling redundancy) the sampling frequency ranged from 3 to 6 samples per year. This suggests that, for the wells sampled, sampling frequencies much higher than monthly can result in considerable loss of information, and may not be cost effective. Care was taken in the design of the field and laboratory sampling protocol to minimize the effects of measurement error. The data analysis confirmed that this goal was accomplished. In most cases considerably less than five percent of the total variability could be attributed to sampling and analytical error. Because of the relatively short duration of the study (42 biweekly sampling occasions at most wells) it was not possible to identify the magnitude of seasonal variations reliably.     

Integrated approach for the quality assessment of freshwater resources in a vineyard area (South Portugal)

An integrated chemical and biological approach for the quality assessment of freshwater resources in a vineyard area of the ??Alentejo?? region (South Portugal) is presented. This includes analysis to 11 pesticide compounds and whole toxicity testing on algae and crustaceans. Simazine, terbuthylazine, terbutryn, desethylatrazine and chlorpyrifos were the most frequently detected pesticides in water collected from wells and drainage channels. Mixtures of up to three compounds in different qualitative combinations were also found. The quality standards for individual pesticides (0.1 ??g L^???1) and pesticides-total (0.5 ??g L^???1) were exceeded in some samples. However, their maximum concentrations were lower than the WHO guidelines, the USEPA health advisory values and the environmental quality standards for priority substances applicable to surface water. In five samples, the herbicides terbuthylazine and terbutryn and the insecticide chlorpyrifos did not pass the toxicity exposure ratio (TER) trigger values specified for aquatic organisms (algae, Daphnia and fish). Maximum toxic effects on Daphnia magna (100%) and Pseudokirchneriella subcapitata (82.56%) were determined in groundwater samples, while in surface water, no toxicity was observed. Concerning effects on Heterocypris incongruens in sediment samples collected at the drainage channels, mortality and growth inhibition values were below 38%. Pro-active management of the use of pesticides is recommended for implementing at the farm and catchment level to reduce inputs into ground- and surface water.     

Indifference curves as a tool for environment impact assessment

Use of indifference curves, defined as functionality between development index and pollution load to evaluate environmental impact, is proposed. Existing Battelle environmental evaluation methodology is subjective in its approach. The use of indifference curves lends a more objective approach to environment assessment methodology. The extent of environmental damage we are prepared to accept, for a development, can be explained by Willingness to Pay and Willingness to Accept approach. The application of proposed approach has been demonstrated taking an example of Power plant set up in forest area. The curves clearly show that cost of EMP considering mitigation of ecological damage is higher than the EMP mitigating impacts of air and water pollution only. The example stresses the need for willingness to accept along with willingness to pay.     

A hydrochemical profile for assessing the groundwater quality of Jaipur City

A study was conducted to evaluate the water quality of Jaipur City. Groundwater samples from hand pumps and tube wells of eleven sampling stations were analyzed during monsoon session with the help of standard methods of APHA. The analytical results shows higher concentration of total dissolved solids, electrical conductivity, total hardness and nitrate, which indicate signs of deterioration but values of pH, calcium, magnesium, sulphate and fluoride are within permissible limit as per WHO standards. From the Hill-Piper trilinear diagram, it is observed that the majority of ground water from sampling stations are calcium-magnesium-chloride-sulphate type water. The values of sodium absorption ratio and electrical conductivity of the ground water were plotted in the US salinity laboratory diagram for irrigation water. Most of the samples fall in C3S1 quality with high salinity hazard and low sodium hazard. Chemical analysis of groundwater shows that mean concentration of cation (in meq/l) is in order magnesium > sodium > calcium > potassium while for the anion (in meq/l) it is chloride > bicarbonate > sulphate > nitrate > carbonate > fluoride.     

Wipe sampling as a tool for monitoring aerosol deposition in workplaces

As a complement to traditional exposure assessment, monitoring deposition of aerosols can be a simple and quick screening method for identifying deposited aerosols. In this presentation examples of screening studies, based on wipe sampling in combination with adequate analytical techniques, are described. These screening methods are rapid, simple and easy to carry out. The examples given in this presentation show a broad applicability and the methods are proven useful for assessing aerosol distribution in the workplace as well as to identify target spots for more extensive assessment of a worker's exposure situation.     

Urinary fluoride as a monitoring tool for assessing successful intervention in the provision of safe drinking water supply in five fluoride-affected villages in Dhar district, Madhya Pradesh, India

Endemic fluorosis was detected in 31 villages in the Dhar district of Madhya Pradesh, Central India. Out of the 109 drinking water sources that were analyzed, about 67 % were found to contain high concentration of fluoride above the permissible level of 1.0 mg/l. Dental fluorosis among the primary school children in the age between 8 and 15 served as primary indicator for fluoride intoxication among the children. Urinary fluoride levels among the adults were found to be correlated with drinking water fluoride in 10 villages affected by fluoride. Intervention in the form of alternate safe water supply in five villages showed significant reduction in the urinary fluoride concentration when compared to the control village. Urinary fluoride serves as an excellent marker for assessing the effectiveness of intervention program in the fluoride-affected villages.     

Continuous high-frequency monitoring of estuarine water quality as a decision support tool: a Dublin Port case study

High-frequency, continuous monitoring using in situ sensors offers a comprehensive and improved insight into the temporal and spatial variability of any water body. In this paper, we describe a 7-month exploratory monitoring programme in Dublin Port, demonstrating the value of high-frequency data in enhancing knowledge of processes, informing discrete sampling, and ultimately increasing the efficiency of port and environmental management. Kruskal–Wallis and Mann–Whitney tests were used to show that shipping operating in Dublin Port has a small–medium effect on turbidity readings collected by in situ sensors. Turbidity events are largely related to vessel activity in Dublin Port, caused by re-suspension of sediments by vessel propulsion systems. The magnitudes of such events are strongly related to water level and tidal state at vessel arrival times. Crucially, measurements of Escherichia coli and enterococci contamination from discrete samples taken at key periods related to detected turbidity events were up to nine times higher after vessel arrival than prior to disturbance. Daily in situ turbidity patterns revealed time-dependent water quality “hot spots” during a 24-h period. We demonstrate conclusively that if representative environmental assessment of water quality is to be performed at such sites, sampling times, informed by continous monitoring data, should take into account these daily variations. This work outlines the potential of sensor technologies and continuous monitoring, to act as a decision support tool in both environmental and port management.     

Luminescence spectroscopy as a screening tool for the potential carcinogenicity of asphalt fumes

A subset of polycyclic aromatic compounds (PACs), which contain 4-6 annulated rings, has been documented as the source of carcinogenicity in animal skin painting studies of petroleum products and asphalt fumes (M. L. Machado, P. W. Beatty, J. C. Fetzer, A. H. Glickman and E. L. McGinnis, Fundam. Appl. Toxicol., 1993, 21, 492; T. A. Roy, S. W. Johnson, G. R. Blackburn and C. R. Mackerer, Fundam. Appl. Toxicol., 1988, 10, 466). Because of the chemical complexity of these materials, it has been difficult to identify the specific compounds within this broad range of PACs responsible for their carcinogenicity. An alternative approach using luminescence spectroscopy was taken in this study to quantify, without identification, a subset of these compounds that appears to cause cancer. The fluorescence response at a specific wavelength pair was obtained for 39 laboratory asphalt fume condensates from animal skin painting studies, yielding a linear correlation coefficient of R2 = 0.96 between the fluorescence response in these materials and the carcinogenicity found in animal studies. In the absence of other asphalt fume condensates from animal studies, 17 petroleum oils were also evaluated using this method and compared with the available animal skin painting data. The details of the method include a clean-up step that removes the highly polar compounds and spectral subtraction of two- and three-ring PAC interference, both of which add to the fluorescence response, yet were not found to contribute to a carcinogenic response from skin painting studies. Full scan fluorescence plots also produce a fingerprint which can be used to assess contamination, such as coal tar products or mixtures of materials, that are not defined as asphalt, yet may be present in the working environment.     

downscaling procedures as a tool for integration of multiple air issues

In assessing the risks associated with climate change,downscaling has proven useful in linking surfacechanges, at scales relevant to decision making, tolarge-scale atmospheric circulation derived from GCMoutput. Stochastic downscaling is related to synopticclimatology, weather-typing approaches (classifyingcirculation patterns) such as the Lamb Weather Typesdeveloped for the United Kingdom (UK), the EuropeanGrosswetterlagen (Bardossy and Plate, 1992) and thePerfect Prognosis (Perfect Prog) method from numericalweather prediction. The large-scale atmosphericcirculation is linked with site-specific observationsof atmospheric variables, such as precipitation, windspeed or temperature, within a specified region. Classifying each day by circulation patterns isachieved by clustering algorithms, fuzzy rule bases,neural nets or decision trees. The linkages areextended to GCM output to account for climate change. Stochastic models are developed from the probabilitydistributions for extreme events. Objective analysiscan be used to interpolate values of these models toother locations. The concepts and some applicationsare reviewed to provide a basis for extending thedownscaling approach to assessing the integrated riskof the six air issues: climate change, UV-B radiation,acid rain, transport of hazardous air pollutants, smogand suspended particulates.     

Freshwater leeches (Hirudinea) as a screening tool for detecting organic contaminants in the environment

In earlier work, we found that leeches from an industrially polluted creek bioaccumulated chlorophenols to much higher concentrations than other resident benthic invertebrates and fish. We suggested that leeches may have significant potential as biomonitors for these and other organic contaminants in the environment. In this study, we compared the bioaccumulation and depuration of 16 organic compounds, including eight chlorophenols (CPs), lindane, DDT and four derivatives, benzothiazole (BT) and 2-(Methylthio)benzothiazole (MMBT) for three species of leeches. Dina dubia had the highest bioaccumulation capacity for most contaminants, but residues persisted longest in Erpobdella punctata. Helobdella stagnalis appeared capable of degrading some compounds. Half lives of CPs, DDT and DDT derivatives were generally longer than one month. In contrast, half lives were only 1 day for lindane, 1–2.5 days for MMBT and 7 days for BT despite very high initial tissue concentrations of the latter two compounds. Bioconcentration factors for contaminants in leeches were higher than those reported for other aquatic organisms. Half lives for lindane, DDT and DDT derivatives were consistent with the literature for other organisms, but half lives for CPs were much longer. The results suggest that leeches would be excellent biomonitors of both continuous and intermittent contamination of a waterway with CPs and DDT, as they retain these compounds for long periods after exposure. Their usefulness as a screening tool for lindane and benzothiazoles would be limited to chronically contaminated environments.     

Development and validation of a macroinvertebrate index of biotic integrity (IBI) for assessing urban impacts to Northern California freshwater wetlands

Despite California policies requiring assessment of ambient wetland condition and compensatory wetland mitigations, no intensive monitoring tools have been developed to evaluate freshwater wetlands within the state. Therefore, we developed standardized, wadeable field methods to sample macroinvertebrate communities and evaluated 40 wetlands across Northern California to develop a macroinvertebrate index of biotic integrity (IBI). A priori reference sites were selected with minimal urban impacts, representing a best-attainable condition. We screened 56 macroinvertebrate metrics for inclusion in the IBI based on responsiveness to percent urbanization. Eight final metrics were selected for inclusion in the IBI: percent three dominant taxa; scraper richness; percent Ephemeroptera, Odonata, and Trichoptera (EOT); EOT richness; percent Tanypodinae/Chironomidae; Oligochaeta richness; percent Coleoptera; and predator richness. The IBI (potential range 0–100) demonstrated significant discriminatory power between the reference (mean = 69) and impacted wetlands (mean = 28). It also declined with increasing percent urbanization (R ² = 0.53, p < 0.005) among wetlands in an independent validation dataset (n = 14). The IBI was robust in showing no significant bias with environmental gradients. This IBI is a functional tool to determine the ecological condition at urban (stormwater and flood control ponds), as well as rural freshwater wetlands (stockponds, seasonal wetlands, and natural ponds). Biological differences between perennial and non-perennial wetlands suggest that developing separate indicators for these wetland types may improve applicability, although the existing data set was not sufficient for exploring this option.     

Hydrochemical profile for assessing the groundwater quality of Sambhar lake City and its Adjoining area

Quality assessment of water is essential to ensure sustainable safe use of it for drinking, agricultural, and industrial purposes. For the same purpose the study was conducted for the samples of water of Sambhar lake city and its adjoining areas. The standard methods of APHA were used to analysis 15 samples collected from hand pumps and tube wells of the specified area. The analytical results show higher concentration of total dissolved solids, electrical conductivity sodium, nitrate, sulfate, and fluoride, which indicate signs of deterioration but values of pH, calcium, magnesium, total hardness, and carbonate are within permissible limits as per WHO standards. From the Hill-piper trilinear diagram, it is observed that the majority of groundwater from sampling stations are sodium?Cpotassium?Cchloride?Csulfate type water. The values of sodium absorption ratio and electrical conductivity of the groundwater were plotted in the US salinity laboratory diagram for irrigation water. Only the one sample fall in C₃S₁ quality with high salinity hazard and low sodium hazard. Other samples fall in high salinity hazard and high sodium hazard. Chemical analysis of groundwater shows that mean concentration of cation is in order sodium > magnesium > calcium > potassium while for the anion it is chloride > bicarbonate > nitrate > sulfate.     

Application of network method as a tool for integrating biodiversity values in Environmental Impact Assessment

Highway construction or expansion projects are among major activities of economic development especially in developing countries. However, road development consistently can lead to major damages to the environment, including habitat fragmentation and ecological instabilities and a considerable threat to fauna and flora. At this point, Environmental Impact Assessment (EIA) in road developments is needed to address and evaluate the ecological issues in decision-making. The object of this study is to strengthen the consideration of ecological issues, i.e., biodiversity in the existing EIA tools. This paper regards a network method as a means to make informed planning decisions by the lessons from a case study. The results indicate that network method is well suited to be applied in ecological impacts assessment. However, some limitations such as complexity and time consumed make casual networks unpopular. Also, impact of traffic noise on acoustic communication (wildlife and human) was performed. It has been shown that sound level for human is much higher than admissible standards. Finally, the study expresses some mitigation measures to improve the acquisition for environmental impact assessment process.     

The Asiatic clam,Corbicula spp., as a biological monitor in freshwater environments

Asiatic clams, Corbicula spp., are filter-feeding freshwater bivalves that are widely distributed, abundant, and fast growing with a lifespan of 1–3 yrs. A review of the existing literature demonstrates that Asiatic clams can concentrate organic pollutants from both water and sediment and heavy metals from water. In conjunction with these traits, they exhibit a high tolerance for the effects resulting from exposure to toxic substances. While an organism must possess these traits to serve as an effective biological monitor, they have also permitted the Asiatic clam to rapidly colonize natural and industrial environments resulting in purported ecological disturbances and severe economic repurcussions, respectively. Its invasive biofouling attributes therefore restrict the use of Asiatic clams for biomonitoring purposes from Corbicula-free drainage systems.     

Monitoring and assessing variation of sewage quality and microbial functional groups in a trunk sewer line

In this study, the variation of sewage quality was investigated and the active fraction of different microbial functional groups in biofilm was quantified in a 5.6-km trunk sewer line. The sewage quality including suspended solids, biochemical oxygen demand, total chemical oxygen demand (COD), total nitrogen, total Kjeldahl nitrogen, ammonia nitrogen, nitrite nitrogen, and nitrate nitrogen were measured and compared with the values in literatures. The results indicated that since the wastewater treatment plant was not operated at its full capacity, the concentrations of different compounds were lower compared with the values in literatures. The values of heterotrophic growth rate constant lay between 5.6 and 8.6 day^???1. Its average value was 7.7 day^???1. The values of heterotrophic lysis rate constant lay between 0.2 and 0.4 day^???1. The active heterotrophic biomass in biofilm varied from 240 to 800 mg COD m^???2 and average value was 497 mg COD m^???2. The biofilm mass varied from 880 to 1,080 mg m^???2. The percentage of heterotroph to biofilm mass fall within the range of 24.0–90.9% and average value was 52.9%. In the oxygen uptake rate batch tests, the biomass, growth rate constant, and lysis rate constant of autotroph could not be determined because the fraction of autotroph in biofilm was relatively few. It revealed that the degradation of organic matters, nitrification, and denitrification occurred in the trunk sewer line. But the results indicate that the condition seem favorable for nitrification.