Coating effects on the glass adsorption of polychlorinated biphenyl (PCB) congeners

The effects of coating materials on polychlorinated biphenyl (PCB) adsorption in aqueous solution were assessed in an attempt to minimize PCB sorption loss during sampling processes. A coating material, which enhances PCB adsorption and allows adsorbed PCBs to be readily extracted by solvents, can act as a sampling concentrator to reduce PCB losses from both adsorption and evaporation. Several coating materials were evaluated, including paraffin oil, silicone oil, dimethyldichlorosilane (Sylon-CT), Prosil 28^® and polydimethylsiloxane (PDS) with viscosity 0.65, 50 (PDS 50), and 500 (PDS 500) cSt. PDS and silicone oil enhanced adsorption for all five congeners examined (IUPAC No. 28, 52, 101, 138, and 180). Sylon-CT, paraffin oil and Prosil 28^® had inconsistent effects on adsorption of different congeners. Desorption of adsorbed PCBs onto all coating types was assessed. The recovery efficiency of extracting PCBs with solvents was enhanced greatly with all coatings as opposed to non-coated surfaces, with the exception of paraffin oil. Coating with silicon oil, PDS 50, and 500 resulted in virtually 100% recovery of adsorbed PCBs. It was also found that Teflon containers were poor substitutes for glass containers and failed to minimize PCB losses. Among the materials studied, the best coating that could be used as a sampling concentrator was PDS 500.     

Effect of mono-ortho and di-ortho substituted polychlorinated biphenyl (PCB) congeners on leopard frog survival and sexual development

We tested the effect of mono-ortho and di-ortho PCB congeners on northern leopard frog (Rana pipiens) hatching success, survival and sexual development. Embryos and tadpoles were exposed to two levels (0.5 and 50 microg/l) of two PCBs. PCBs 101 and 70 were selected because they were present in amphibians collected in the Fox River-Green Bay ecosystem and they have the theoretical structural requirements to be able to bind to the estrogen receptor and mediate estrogenic responses. The exposure of leopard frog embryos and tadpoles to PCB 70 and 101 did not significantly affect hatchability, survival, deformities or growth. There were significant departures from the expected 50:50 sex ratio in tadpoles/froglets exposed to PCB 101 and PCB 70. In all the cases of significant departure, the bias was towards higher number of females. Decrease in the proportion of male gonads and increase in the proportion of intersex gonads were observed with increasing PCB tissue concentrations. The effects of PCB congeners on sexual differentiation occur at concentrations higher than observed in frogs in the Fox River/Green Bay ecosystem.     

A comparative study of cadmium phytoextraction by accumulator and weed species

Phytoextraction has shown great potential as an alternative technique for the remediation of metal contaminated soils. The objective of this study was to investigate cadmium (Cd) phytoextraction ability of high biomass producing weeds in comparison to indicator plant species. The pot study conducted with 10 to 200 mg Cd kg(-1) soil indicated that Ipomoea carnea was more effective in removing Cd from soil than Brassica juncea. Among the five species, B. juncea accumulated maximum Cd, but I. carnea followed by Dhatura innoxia and Phragmytes karka were the most suitable species for phytoextraction of cadmium from soil, if the whole plant or above ground biomass is harvested. In the relatively short time of this experiment, I. carnea produced more than 5 times more biomass in comparison to B. juncea. There were significant differences (p < 0.05) between the shoot length and shoot mass of control and treated plants.     

Historical reconstruction of polychlorinated biphenyl (PCB) exposures for workers in a capacitor manufacturing plant

We developed a semiquantitative job exposure matrix (JEM) for workers exposed to polychlorinated biphenyls (PCBs) at a capacitor manufacturing plant from 1946 to 1977. In a recently updated mortality study, mortality of prostate and stomach cancer increased with increasing levels of cumulative exposure estimated with this JEM (trend p values?=?0.003 and 0.04, respectively). Capacitor manufacturing began with winding bales of foil and paper film, which were placed in a metal capacitor box (pre-assembly), and placed in a vacuum chamber for flood-filling (impregnation) with dielectric fluid (PCBs). Capacitors dripping with PCB residues were then transported to sealing stations where ports were soldered shut before degreasing, leak testing, and painting. Using a systematic approach, all 509 unique jobs identified in the work histories were rated by predetermined process- and plant-specific exposure determinants; then categorized based on the jobs’ similarities (combination of exposure determinants) into 35 job exposure categories. The job exposure categories were ranked followed by a qualitative PCB exposure rating (baseline, low, medium, and high) for inhalation and dermal intensity. Category differences in other chemical exposures (solvents, etc.) prevented further combining of categories. The mean of all available PCB concentrations (1975 and 1977) for jobs within each intensity rating was regarded as a representative value for that intensity level. Inhalation (in microgram per cubic milligram) and dermal (unitless) exposures were regarded as equally important. Intensity was frequency adjusted for jobs with continuous or intermittent PCB exposures. Era-modifying factors were applied to the earlier time periods (1946–1974) because exposures were considered to have been greater than in later eras (1975–1977). Such interpolations, extrapolations, and modifying factors may introduce non-differential misclassification; however, we do believe our rigorous method minimized misclassification, as shown by the significant exposure–response trends in the epidemiologic analysis.     

Comparative toxicities of the polychlorinated dibenzofuran (PCDF) and biphenyl (PCB) mixtures which persist in Yusho victims

The toxic Yusho oil contained a mixture of polychlorinated biphenyls (PCBs) which were contaminated by other halogenated aromatics including the highly toxic polychlorinated dibenzofurans (PCDFs). It has been reported that the PCBs and PCDFs which persist in the liver of victims still suffering from Yusho poisoning include the following compounds; 2,3′,4,4′,5-penta-,2,2′,4,4′,5,5′-,2,2′,3′,4,4′,5- and 2,3,3′,4,4′,5-hexa, 2,2′,3,4,4′,5,5′- and 2,2′,3,3′,4,4′,5-heptachlorobiphenyls and the 2,3,7,8-tetra-, 1,2,4,7,8-, 1,2,3,7,8- and 2,3,4,7,8-penta- and 1,2,3,4,7,8-hexachlorodibenzofurans. All of these PCBs and PCDFs have been synthesized and reconstituted to approximate their composition in human liver. A comparison of the dose-response effects of the reconstituted PCB and PCDF mixtures in causing weight loss, thymic atrophy and the induction of cytochrome P-448-dependent monooxygenases indicated that the PCDF mixture was at least 700 times more active than the PCBs. Since the ratio of PCBs/PCDFs persisting in Yusho patients' blood and liver was less than 600:1 and 5:1 respectively, the results suggest that the PCDFs are the major etiologic agent in Yusho poisoning.     

The three-dimensional structure of 3,3',4,4'-tetrachlorobiphenyl, a dioxin-like polychlorinated biphenyl (PCB)

The crystal structure of PCB 77 (3,3',4,4'-tetrachlorobiphenyl, C(12)H(6)Cl(4)), a dioxin-like PCB congener, is described. The dihedral angle of PCB 77 is 43.94(6) degrees, which is slightly larger than calculated or experimental dihedral angles of biphenyl derivatives in solution but smaller than experimental dihedral angles in the gas phase.     

The impact of production type and region on polychlorinated biphenyl (PCB), polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) concentrations in Canadian chicken egg yolks

Chicken eggs from five different production types (conventional, omega-3 enriched, free range, organic and free run) were collected, when available, from three regions (west, central and east) of Canada to determine persistent organic pollutant (POP) concentrations. Total polychlorinated biphenyl (PCB) concentrations (∑37 congeners) in yolks from the eggs ranged from 0.162 ng g⁻¹ lipid to 24.8 ng g⁻¹ lipid (median 1.25 ng g⁻¹ lipid) while the concentration of the sum of the 6 indicator PCBs ranged from 0.100 ng g⁻¹ lipid to 9.33 ng g⁻¹ lipid (median 0.495 ng g⁻¹ lipid). Total polychlorinated dibenzo-p-dioxin/dibenzofuran (PCDD/F) concentrations ranged from 2.37 pg g⁻¹ lipid to 382 pg g⁻¹ lipid (median 9.53 pg g⁻¹ lipid). The 2005 WHO toxic equivalency (TEQ) ranged from 0.089 pg TEQ_{PCDD/F+dioxin-like[DL]-PCB} g⁻¹ lipid to 12.8 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid (median 0.342 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid). PCB and PCDD/F concentrations were significantly different (p < 0.001) in egg yolks from different regions of collection. In contrast to observations in Europe, PCB and PCDD/F concentrations in Canadian egg yolks were not impacted solely by the production type (e.g., conventional, free range, organic, etc.) used to maintain the laying chickens. Additionally, only one Canadian free range yolk from western Canada (12.8 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid) exceeded the European toxic equivalent concentration limits for eggs (5 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid). This differs from observations in Europe where free range/home produced eggs frequently have higher POP concentrations than eggs from other production types. Median PCB dietary intake estimates based on consumption of eggs were less than 10 ng d⁻¹ while median PCDD/F intakes were less than 45 pg d⁻¹.     

Simultaneous mobilization of heavy metals and polychlorinated biphenyl (PCB) compounds from soil with cyclodextrin and EDTA in admixture

This study evaluated the efficacy of a washing process with cyclodextrin in combination with ethylenediaminetetraacetate (EDTA) for the simultaneous mobilization of heavy metals and PCBs from a field contaminated soil. Ultrasonically aided mixing of the field contaminated soil with a combination of cyclodextrin solution (10%, w/v) and a sparing quantity (2 mmol) of EDTA, simultaneously mobilized appreciable quantities of PCBs and much of the analyte metal (Cd, Cr, Cu, Mn, Ni, Pb, Zn) burdens. Relative to the action of individual reagents, a combination of randomly methylated (RAMEB) or hydroxypropyl beta-cyclodextrin (HPCD) with EDTA did not alter the PCB extraction efficiency nor did the presence of cyclodextrin change the efficiency of mobilization of most heavy metals (Al, Cd, Cr, Fe, Mn, Ni, and Zn) but did increase the recovery of Cu and Pb modestly. Three sonication-washes with the same charge of reagents mobilized appreciable quantities of PCBs (40-76%) and quantitatively extracted the labile fraction of Cd, Cu, Mn, and Pb. RAMEB proved to be more efficient than HPCD for PCB extractions. Three successive extractions with a single charge of cyclodextrin mobilized almost as much PCB (RAMEB, 76%; HPCD, 40%) as did the companion extractions that used fresh reagents each time (RAMEB, 78%; HPCD, 42%). Collectively, these studies demonstrated that PCB compounds and selected heavy metals can be co-extracted efficiently from soil with three successive washes with the same washing suspension containing EDTA and cyclodextrin.     

Confirmation of polychlorinated biphenyl (PCB) distribution in the blood and verification of simple quantitative method for PCBs based on specific congeners

We measured the concentration of each polychlorinated biphenyl (PCB) congener in whole blood, plasma and blood cells, and investigated the distribution of PCBs in human blood using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). The PCB concentrations in plasma and whole blood in terms of lipid concentrations were almost equal, with a correlation coefficient of r = 0.972. In the blood, the ratio of PCBs in blood cells to those in plasma was generally about 1:9 and the congener distribution patterns in blood cells and plasma were similar.We performed verification of a simple mass screening method by obtaining information on the main PCB congeners for investigations on human accumulation and exposure. The total concentration of the seven PCB congeners (UNEP-7) proposed to the United Nations Environment Programme (UNEP) by Muir and Morita was about 50% of the total concentration of all PCB congeners, and UNEP-30 was about 80%. The seven main congeners in the blood (MCB-7) showed a value that was about 60%, and MCB-30 showed a value that was about 90%. Determinations with the main congeners in the blood showed a correlation of r = 0.990 or more between the main eight congeners (MCB-7 plus #74) and the total PCB concentration for all congeners. The results suggest that, although total PCB concentration can be effectively estimated from the main seven congeners, the main eight congeners would be preferable, and that the use of these congeners in the simple mass screening method would be effective for populations in areas uncontaminated by PCBs.     

Evidence for bioamplification of nine polychlorinated biphenyl (PCB) congeners in yellow perch (Perca flavascens) eggs during incubation

This study investigated bioamplification of polychlorinated biphenyls (PCBs) in yellow perch (Perca flavescens) eggs resulting from nutrient utilization by developing embryos during incubation. Newly fertilized eggs containing trace levels of PCBs via maternal deposition were collected from an aquaculture pond in which adult broodstock had been reared over their natural lives. The eggs were incubated using a flow through system that received the same pond water at in-situ temperatures from which they were spawned. Replicate samples of eggs were collected at six time points throughout incubation, ranging from day 0 (newly fertilized eggs) to post-hatch larvae (2-d old). Congener specific PCB fugacities in pooled egg samples showed increases over the incubation period. Just prior to hatching, incubated eggs averaged 2.7-fold higher PCB fugacities compared to fresh eggs. The increase in PCB fugacity with egg incubation time was independent of chemical K_OW. After hatching, PCB residues were lost from the larvae, attenuating the maximum chemical fugacity achieved in late-incubated eggs. However, the rate of PCB elimination in the early larvae stages was K_OW dependent such that a significant larvae/egg fugacity ratio was still evident for intermediate and highly hydrophobic compounds 2 d post-hatching. This study provides the first evidence of in-ovo PCB bioamplification in eggs of an aquatic species and suggests that incubating fish embryos are exposed to higher chemical fugacities in-ovo than would be predicted by maternal deposition alone.     

Resistant sorption of in situ chlorobenzenes and a polychlorinated biphenyl in river Rhine suspended matter

The desorption kinetics of in situ chlorobenzenes (dichlorobenzenes, pentachlorobenzene and hexachlorobenzene) and 2,4,4^′-trichlorobiphenyl (PCB-28) were measured with a gas-purge technique for river Rhine suspended matter sampled in Lobith, The Netherlands. This suspended matter is the main source of sediment accumulation in lake Ketelmeer. In lake Ketelmeer sediment earlier observations showed that slow and very slow fractions dominate the desorption profile.

For the river Rhine suspended matter, only for PCB-28 a fast desorbing fraction of around 1.6% could be detected. The observed rate constants were on the average 0.2 h⁻¹ for fast desorption, 0.004 h⁻¹ for slow desorption, and 0.00022 h⁻¹ for very slow desorption. These values are in agreement with previous findings for the sediment from lake Ketelmeer and with available literature data on fast, slow, and very slow desorption kinetics.

The results from this study show the similarity of desorption profiles between river Rhine suspended matter, and the top layer sediment from lake Ketelmeer. This indicates that slow and very slow fractions are already present in material forming the top layer of lake Ketelmeer, and were not formed after deposition of this material in the lake. The absence of detectable fast fractions for most compounds could be caused by the absence of recent pollution of the suspended matter. But, the observations may also be explained by a rapid disappearance of compounds from the fast fraction due to a combination of a high affinity of very slow sites for these compounds, and their relatively high volatility.     

Screening of human health risk to infants associated with the polychlorinated biphenyl (PCB) levels in human milk from Punjab Province,Pakistan

This study assessed the polychlorinated biphenyl (PCB) levels in human milk and its associated health risk to infants from rural and urban settings of five districts of Punjab Province, Pakistan. The ∑₃₄PCB concentrations ranged from 30.9 to 68.3 ng g^?1 on lipid weight (l.w.) basis. The ∑₈DL-PCB concentrations were ranged from 0.29 to 1.35 ng g^?1 l.w., (mean 6.2 ± 8.7 ng g^?1 l.w.), with toxicity equivalent to polychlorinated dibenzodioxins (PCDDs) ranging from 8.58 × 10^?6 to 0.05 ng TEQ g^?1 l.w. The spatial trend of PCB levels in human milk revealed higher bioaccumulative levels for urban mothers as compared with rural counterparts. The estimated daily intake (EDI) values of DL-PCBs to infants through trans-mammary transfer were considerably higher than tolerable daily intake limits established by WHO (i.e., 1–4 pg TEQ kg^?1 bw) and other globally recognized organizations. Similarly, the hazard quotient values for TEQ ∑₈DL-PCBs (range 1.21 to 79.87) were far above the benchmark value of 1 at all the sampling sites, indicating the high levels of adverse health risks to infants in the region through breast milk consumption. The ∑₃₄PCB levels were found to be negatively correlated with mother’ age (r = ?0.31; p = 0.02), parity (r = ? 0.85; p = 0.001), and infant’ birth weight (r = ? 0.73; p = 0.01). The present study suggests undertaking comprehensive public health risk assessment studies and firm regulatory measures to safeguard human health risks.

     

The three-dimensional structure of 3, 3', 5'-trichloro-4-methoxybiphenyl, a "coplanar" polychlorinated biphenyl (PCB) derivative

The crystal structure of a "coplanar" polychlorinated biphenyl (PCB) derivative, 4-methoxy-3, 3', 5'-trichlorobiphenyl (C13H9Cl3O), is described. The torsion angle of the title compound is 41.31(07) degrees, which is in good agreement with the calculated torsion angle of 38.2 degrees in aqueous solution.     

Levels of polychlorinated biphenyls (PCB) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) in fillets of farmed Southern Bluefin Tuna (Thunnus maccoyii)

Southern Bluefin Tuna (SBT) (Thunnus maccoyii) is the only farmed tuna species in the southern hemisphere, with production centred offshore of Port Lincoln, South Australia. SBT farming is a quota-based fishery where farmers fatten wild-caught stock for subsequent sale as fresh-chilled or frozen product, mainly to Japanese markets. Fillets from wild-caught and farmed SBT were analysed and the concentration of polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are reported for the first time. Time of farming was separated into two periods: a typical farming period of approximately five months and an experimental scenario that involved holding (farming) these fish for an additional 12 months. WHO-PCB and WHO-PCDD/F TEQ concentrations in fillets on a fresh weight basis at the same times and over the same periods were, 0.67-1.18pg-TEQg(-1) and 0.16-0.29pg-TEQg(-1), respectively. All WHO-PCB congeners, and only three WHO-PCDD/F congeners, were found to biomagnify during farming, after blank correction. Caution should be exercised when extrapolating these results to SBT farming as a whole because of the use of varying husbandry and feeding practices employed by different companies.     

Low hepatic 7-ethoxyresorufin-O-deethylase (EROD) activity and minor alterations in retinoid and thyroid hormone levels in flounder (Platichthys flesus) exposed to the polychlorinated biphenyl (PCB) mixture, Clophen A50

The effect of the polychlorinated biphenyl (PCB) mixture Clophen A50 on hepatic cytochrome P4501A1 dependent EROD (7-ethoxyresorufin-O-deethylase) activity, plasma thyroid hormone levels and plasma, kidney and liver retinoid concentrations of the euryhaline flatfish flounder (Platichthys flesus) was determined 2 and 10 days after i.p. (intraperitoneal) injection with 20, 100 and 500 mg Clophen A50/kg body weight. No effect of Clophen A50 on total cytochrome P450 content in flounder liver was observed at both time points. A six-fold, dose-dependent, significant increase in EROD activity was found at exposure day 10 in flounder receiving 100 or 500 mg Clophen A50/kg body weight. Plasma retinol concentrations were not altered at both time points after Clophen A50 administration, whereas renal retinol levels showed a minor dose-related increase at day 2 and day 10 of exposure. Significant alterations in hepatic retinoid concentrations were observed, which were not dependent on the dose of PCB administered. In addition Clophen A50 administration did not result in a dose-related alteration of total T4 concentrations in plasma. Total T3 concentrations in plasma were only significantly increased at day 2 after exposure, whereas free T4 concentrations were increased at both time points after Clophen A50 administration. These data indicate that with regard to the parameters investigated and in contrast to other fish species studied, the flounder is not a sensitive species to PCB exposure.     

Sources of polychlorinated biphenyl blank contamination and their impact on fingerprinting

Abstract

The development of high-resolution mass spectrometry methods for the measurement of polychlorinated biphenyls (PCBs) in environmental samples has dramatically reduced detection limits, leading to problems obtaining clean blanks. When PCBs are detected in samples at concentrations similar to the blanks, blank contamination must be addressed before fingerprinting and source apportionment through positive matrix factorization (PMF) can be successful. We tested a variety of blank correction methods using data from a study of water column concentrations of PCBs in the Spokane River, where concentrations of Σ₂₀₉PCBs in whole water samples averaged 171?pg/L without blank correction and Σ₂₀₉PCBs in the blanks averaged 88?pg/L. The results suggest that subtracting blank masses from sample masses can lead to erroneous results. Instead, censoring at one times the batch-specific blank level is a better approach. The sources of PCBs in field and method blanks were investigated by examining their congener profiles via PMF. The results suggest that commercial PCB formulations (in the US, Aroclors) continue to be the primary source of PCBs in blanks forty years after PCB production and use were banned in the United States. Other sources of PCBs to blanks include PCB 11 from pigments; PCBs 44?+?47?+?65, 45?+?51, and 68 arising from polymers cured using bis(2,4-dichlorobenzoyl) peroxide; and PCBs 1, 2, 3, 4, 8, 15 and others arising from silicone products derived from phenylsiloxanes, such as silicone-based adhesives.     

Polychlorinated biphenyl (PCB) congeners and chlorinated pesticides in a cod liver oil reference material

A cod liver oil reference material, Standard Reference Material (SRM) 1588, which was issued by the National Institute of Standards and Technology (NIST) in 1989, has certified concentrations for five polychlorinated biphenyl (PCB) congeners and ten chlorinated pesticides. Recently, this SRM has been extensively characterized by additional analyses at NIST and by analyses at the Canadian Wildlife Service (CWS) where the SRM was used as a control sample during routine analyses of wildlife tissue specimens. In this paper the results from NIST and CWS are compared and the concentrations for over 40 PCB congeners and 20 chlorinated hydrocarbons are reported.     

A case of polychlorinated biphenyl contamination of water and sediment in the Slovenian karst region (Yugoslavia)

An incident is described in which polychlorinated biphenyls (PCBs) from an electro-industrial plant waste tip draining into ground-water channels in karst terrain have contaminated a potable water source. PCB composition data were obtained using quadropole GC-MS and capillary GC. The average level of PCBs determined in water was 0.3 μg 1^?1 and in sediment 55 μg g^?1     

Polychlorinated biphenyl (PCB) anaerobic degradation in marine sediments: microcosm study and role of autochthonous microbial communities

Polychlorobiphenyl (PCB) biodegradation was followed for 1 year in microcosms containing marine sediments collected from Mar Piccolo (Taranto, Italy) chronically contaminated by this class of hazardous compounds. The microcosms were performed under strictly anaerobic conditions with or without the addition of Dehalococcoides mccartyi, the main microorganism known to degrade PCBs through the anaerobic reductive dechlorination process. Thirty PCB congeners were monitored during the experiments revealing that the biodegradation occurred in all microcosms with a decrease in hepta-, hexa-, and penta-chlorobiphenyls (CBs) and a parallel increase in low chlorinated PCBs (tri-CBs and tetra-CBs). The concentrations of the most representative congeners detected in the original sediment, such as 245-245-CB and 2345-245-CB, and of the mixture 2356-34-CB+234-245-CB, decreased by 32.5, 23.8, and 46.7 %, respectively, after only 70 days of anaerobic incubation without any bioaugmentation treatment. Additionally, the structure and population dynamics of the microbial key players involved in the biodegradative process and of the entire mixed microbial community were accurately defined by Catalyzed Reporter Deposition Fluorescence In Situ Hybridization (CARD-FISH) in both the original sediment and during the operation of the microcosm. The reductive dehalogenase genes of D. mccartyi, specifically involved in PCB dechlorination, were also quantified using real-time PCR (qPCR). Our results demonstrated that the autochthonous microbial community living in the marine sediment, including D. mccartyi (6.32E+06 16S rRNA gene copy numbers g^?1 sediment), was able to efficiently sustain the biodegradation of PCBs when controlled anaerobic conditions were imposed.