典型可燃物燃烧烟尘物化特性差异性研究

开展对典型可燃物燃烧烟尘的物化特性差异性研究,是全面了解烟尘信息的基础.基于可控条件下的燃烧试验,对典型可燃物燃烧烟尘物理特性和化学组分进行了分析.通过对比分析汽油燃烧烟尘、聚苯乙烯燃烧烟尘、ABS燃烧烟尘及柴油烟尘和正庚烷烟尘的透射电镜图片,对透射电镜图的紧凑性、复杂性及灰度值进行了深入分析,探讨了燃烧烟尘的物理差异性.利用固相微萃取-气质联用技术(SPME-GC-MS),对汽油燃烧烟尘、聚苯乙烯燃烧烟尘、ABS燃烧烟尘化学组分进行了分析和对比.通过燃烧烟尘的特征物质组分的分析,得到3种燃烧烟尘在特征物质的分布和出峰时间等方面的差异性.这些差异性可作为对烟尘来源及燃烧条件等因素判别的依据.     

黄磷燃烧特性实验研究与理论分析

基于黄磷燃烧特性实验,对黄磷燃烧的动力学现象进行了实验研究和理论分析。通过观察不同燃烧表面积的黄磷燃烧动力学现象,获得了黄磷的燃烧特性参数,并利用池火模型对黄磷燃烧实验进行了理论分析。研究结果表明：固定表面积的黄磷燃烧时,黄磷的质量损失速率可近似视为某一恒定值,黄磷的质量损失速率与燃烧表面积有关。黄磷燃烧实验火焰最高温度约为1000℃,火焰高度与燃烧表面积有关。池火模型可以对黄磷的燃烧特性参数进行预测和分析,池火模型所预测的火焰高度与实验数据基本相吻合,相对误差小于7％。     

开放和封闭空间内不同间隙的竖向电缆燃烧试验研究

为了研究封闭空间对竖向电缆燃烧过程的影响,在开放空间和封闭空间内分别进行了一系列不同间隙的竖向电缆燃烧试验。通过分析开放空间和封闭空间内不同电缆间隙的竖向电缆燃烧过程中质量损失速率,得到电缆之间的间隙对竖向电缆燃烧速率有着决定性的影响。通过对比开放空间和封闭空间内竖向电缆的燃烧过程发现,封闭空间对竖向电缆燃烧过程的影响作用存在一个临界区间,该区间的临界判据是由电缆燃烧火焰对电缆的热作用和封闭空间内烟气层对电缆的热反馈决定的。基于封闭空间内的竖向温度分布,通过分析其无量纲温度梯度,得到封闭空间内竖向电缆燃烧过程存在一个特征明显的温度过渡区域。     

烟道不同沉积部位油垢的热解燃烧试验研究

烟道火灾的发展蔓延决定于烟道内不同部位沉积油垢的热解燃烧特性。利用气质联用仪和热重分析仪,对典型中式厨房烟道入口及出口部位的油垢进行了主要成分和热解燃烧特性分析。结果表明:烟道不同部位油垢的热解燃烧性能差异很大,位于出口部位的油垢,其主成分相对分子质量小,热分解起始温度和起火温度低,热解燃烧第一阶段活化能低,会首先起火;位于入口部位的油垢,其综合燃烧性能高,燃烧猛烈,氧气的供给量对燃烧影响不大。烟道火灾防治工作需综合考虑入口部位与出口部位油垢的不同热解燃烧特性。     

变压器油池火燃烧规律的实验研究*

为对变压器油池火灾进行准确有效的灭火,研究不同尺寸和不同厚度下变压器油的火灾动力学特征和基本燃烧特性,具体分析变压器油的燃烧过程和变压器油燃烧速率、火焰温度以及辐射热流随油池直径以及厚度的变化规律。结果表明:整个油品的燃烧过程分为预热燃烧阶段、稳定燃烧阶段和火焰熄灭阶段。对于厚度大于10 mm的油池燃烧,稳定阶段的燃烧速率与油层厚度无关,稳定阶段的燃烧速率随着油池直径的增加而增加。同时,变压器油火灾连续火焰区温度接近750 ℃。对于稳定燃烧阶段下的变压器油燃烧,基于辐射通量可得出在燃烧过程中,辐射热量占总燃烧热的占比约为1/3。研究结果可丰富变压器油燃烧的基础数据,为变压器火灾的灭火提供参考。     

室内火灾中外部燃烧现象的数值模拟

外部燃烧是室内火灾中火焰随烟气流出窗户并在窗户外燃烧的现象。外部燃烧会造成火势从初始着火的房间向其他房间或楼层蔓延,具有很大的危害性。本文应用美国国家标准技术局（NIST）开发的FDS程序,对外部燃烧现象进行了研究。首先对Bullen和Thomas的实验进行数值模拟,用以验证FDS对外部燃烧现象的模拟效果。在相近的燃料过量因子的条件下,计算得到的外部燃烧羽流的温度分布结果、外部燃烧火焰的高度和火焰距离窗户所在壁面的水平距离与Bullen和Thomas的实验结果符合得较好。之后,研究了不同窗户大小和不同燃料消耗率对外部燃烧的影响。最后,发现当燃料消耗率足够大致使室内燃料过量因子接近1时,室内火焰将会熄灭,燃料流出窗户形成的外部燃烧火焰会被拉长,火焰肾贴窗户外的壁面向上燃烧。     

有障碍物半开口管道内氢气燃烧数值模拟研究

基于有障碍物氢气燃烧实验装置进行数值模拟研究,采用Fluent软件分析了半开口管道内障碍物对氢气/空气燃烧特性的影响。结果表明:障碍物会促进实验管段内氢气火焰加速,随着障碍物阻塞率和数量的增加,火焰加速更快且燃烧压力峰值更大;在相同阻塞率下,障碍物形状对氢气火焰速度和燃烧压力峰值的影响很小;燃烧压力随障碍物间距的增大先增大后减小,障碍物间距为3倍管道内径时产生的燃烧压力峰值最大。     

酒精在常见可燃地面材料燃烧痕迹特征规律研究

易燃液体燃烧痕迹识别对助燃剂放火火灾调查至关重要。选用丙纶地毯和PVC地板革作为纤维和塑料地板的代表,以工业酒精作为易挥发助燃剂的代表,研究酒精用量、灭火方式等对燃烧痕迹形成及痕迹稳定性的影响。通过与未加载酒精的痕迹对比,发现丙纶地毯因热稳定性较差,燃烧后往往能形成烧坑或烧洞,其燃烧轮廓以典型的灰化形式存在,加载酒精的部位熔融严重,与地面紧紧粘连在一起;PVC地板革因为表面光滑,酒精在其表面不断流淌,燃烧后会留下清晰的轮廓,类似于细线状的印痕,而地板革本身基本不会燃烧。燃烧熄灭的方式也会对其炭化程度、燃烧图痕、残余形状产生影响。     

煤燃烧过程中NOx的形成机理及控制技术

通过对NOx的生成机理分析，阐述了燃烧过程中控制NOx生成和降低排放量的原则，探讨了目前相关的低NOx燃烧技术。强调了在降低NOx的同时必须注意高效率，对低挥发分煤在采用空气分级燃烧情况下的高效低NOx燃烧措施进行了分析研究。     

阻燃剂对聚乙烯垂直燃烧烟气成分的影响

本文采用烟气成分分析仪、垂直燃烧测试仪对添加几种不同类型阻燃剂的低密度聚乙烯进行实验研究,讨论了不同阻燃剂及其含量对PE燃烧烟气成分的影响.结果表明:PE中添加TBBA、ZB、Mg(OH)2和纯PE相比燃烧产生CO2浓度变小;含量相同时,TBBA、Mg(OH)2较ZB对PE燃烧生成CO2浓度影响大.含ZB、Mg(OH)2的PE燃烧生成CO浓度较纯PE燃烧生成CO浓度小,而添加TBBA对PE燃烧生成CO浓度影响与所添加份数有关.增大阻燃剂含量对抑制烟气中CO、CO2浓度来说并非越多越好.     

油浸变压器排油注氮装置在500kV变电站的设计与应用

在分析500kV变电站主变压器消防系统的现状,比较3类消防系统优缺点的基础上,详细论述了主变排油注氮装置的结构组成、工作原理、参数计算、控制系统设计以及需要注意的事项等,为下一步排油注氮装置的推广应用打下基础.     

HAZOP结合What-if方法在某延迟焦化装置除焦中的应用

为克服传统危险与可操作性（HAZOP）定性分析方法在复杂操作、间歇作业等过程中使用的局限性,提出在传统HAZOP定性分析方法的基础上结合What-if（故障假设）方法,对人的不安全行为和操作规程不完备所导致的风险后果分析作出补充。详细说明其技术原理、工作流程等使用细节,系统阐述该方法与传统HAZOP定性分析方法的区别,并在某延迟焦化装置的除焦操作的风险分析中应用。经分析,识别出在“给水-泡焦”节点,有“操作规程错误”场景2项,“操作规程不具体”场景1项,不存在“操作人员未按操作规程执行”场景。研究结果表明:本文方法有效且具有较好效果,可以广泛应用于操作规程/作业指导书审查、作业过程隐患排查等方面,帮助企业开展操作层面的风险识别与管理,提升企业的生产安全水平。     

潞安矿区煤层渗透率的各向异性特征实验研究

为了研究原位煤体渗透性的各向异性特征,以山西潞安常村矿3号煤层圆柱试样为对象,利用TCQT-Ⅲ型低渗煤层气相驱替增产试验装置,对煤样进行加载,并以氮气注入压力2.0 MPa的条件下,分析垂直层理和平行层理2个方向的煤体变形和渗透率变化特征。实验结果表明:煤样在加载过程中,平行和垂直层理煤样渗透率均随着有效应力的增大而减小,平行层理方向的渗透率始终大于垂直层理方向,应力加载初期渗透率急剧下降,最后逐渐趋于平缓;径向应变的增加量与渗透率呈正相关性,且平行层理相关性大于垂直层理;沿平行层理方向的裂隙度大于沿垂直层理方向,沿垂直层理方向的应变量大于沿平行层理方向;应变增加量均随有效应力的增加而逐渐减小。研究结果可为煤层井网布置及优化提供参考。     

Nighttime pedestrian fatalities: A comprehensive examination of infrastructure,user, vehicle,and situational factors

Introduction: Pedestrian fatalities in the United States increased 45.5% between 2009 and 2017. More than 85% of those additional pedestrian fatalities occurred at night. Method: We examine Fatality Analysis Reporting System (FARS) data for fatal pedestrian crashes that occurred in the dark between 2002 and 2017. Within-variable and before/after examinations of crashes in terms of infrastructure, user, vehicle, and situational characteristics are performed with one-way analysis of variance (ANOVA) and two-sample t-tests. We model changes in crash characteristic proportions between 2002–2009 and 2010–2017 using linear regressions and test for autocorrelation with Breusch-Godfrey tests. Results: The increase in fatal nighttime pedestrian crashes is most strongly correlated with infrastructure factors: non-intersection unmarked locations (saw 80.8% of additional fatalities); 40–45 mph roads (54.6%); five-lane roads (40.7%); urban (99.7%); and arterials (81.1%). In addition, SUVs were involved in 39.7% of additional fatalities, overrepresenting their share of the fleet. Increased pedestrian alcohol and drug involvement warrant further investigation. The age of pedestrians killed increased more (18.1%) than the national average (3.2%). Conclusions: By identifying factors related to the increase in nighttime pedestrian fatalities, this work constitutes a vital first step in making our streets safer for pedestrians. Practical Applications: More research is needed to understand the efficacy of different solutions, but this paper provides guidance for such future research. Engineering solutions such as road diets or traffic calming may be used to improve identified infrastructure issues by reducing vehicle speeds and road widths. Rethinking vehicle design, especially high front profiles, may improve vehicle issues. However, the problems giving rise to these pedestrian fatalities are likely a result of not only engineering issues but also interrelated social and political factors. Solutions may be correspondingly comprehensive, employing non-linear, systems-based approaches such as Safe Systems.     

Footedness and Mounting—Short Review and Two Case Studies

Footedness is a personal quality like handedness. Footedness may be associated with moving ability during mounting, dismounting, and jumping movements. Occupational accidents have occurred during movement at different working levels, during the use of access and exit systems, and during the mounting of vehicles. Aging can also affect accident risk and body laterality. For example, falling accidents on stairs are common among the elderly. One reason for accidents may be that the structure of the access system or stair system is unsuitable for individual moving patterns depending partly on body laterality. Footedness and the way the feet are used may be contradictory to the demands of the moving situation, especially during uncommon or rapid situations. This contradiction may trigger disturbance during moving. The aims of this pilot study were (a) to review the literature briefly and (b) to describe the use of the dominant and nondominant foot by farmers and the elderly when mounting a tractor and stairs, respectively. The study also gives ideas for future studies based on both (a) and (b).     

AHP与GA-SVM耦合模型在滑坡预警中的应用*

为了减少滑坡造成的损失,提高滑坡预测的准确性,通过搭建灾害模拟平台获得滑坡的实验数据,在获得多组模拟实验数据后,分析各变量的特性。首先,通过层次分析(Analytic Hierarchy Process,AHP)算法,对滑坡进行危险度划分;然后,通过支持向量机(Support Vector Machine,SVM)建立模型,遗传算法(Genetic Algorithm,GA)再优化SVM参数,提出1种层次分析法与GA-SVM相耦合的模型。研究结果表明:AHP方法划分后的数据,通过GA与SVM结合建立的模型精度较好,实验预测结果与实际结果较为吻合,与单一SVM相比,精度更高,结果更好,更加适用于多变量的复杂非线性滑坡预警。     

Debunking the false dichotomy of leadership idealism and pragmatism: Critical evaluation and support of newer genre leadership theories

Leadership theories have shifted over the last few decades from a focus on managerial functions and economic leader–follower exchanges toward greater focus on the interpersonal dynamics occurring within the leadership process. Theories such as transformational, ethical, authentic, and other “newer genre” theories were created to address neglected topics such as leader vision and inspirational messages, transparency, emotional effects, morality, individualized attention, and intellectual stimulation. Critiques of these theories, however, have been raised. In this paper, we address five of those critiques and argue for the validity and practical effectiveness of the new genre theories. Further, we describe how newer genre leadership research should be viewed as a performative epistemology, entailing a process of co‐creation involving scholars and practitioners. Finally, from this view, we provide general ideas for leader development. Copyright © 2014 John Wiley & Sons, Ltd.     

Occupational Safety and Health in Finland

In Finland, occupational safety is the responsibility of the employer, while the occupational safety and health laws are enforced by the Labour Inspection Service, an organization of the state. The Labour Inspection is divided in 11 administrative districts, and it employs 360 professionals. They are mandated to carry out site visits without prearranged appointments to inspect safe work situations, working hours, construction safety, or any aspect of accident risks. The inspectors are also mandated to verify the existence of sufficient occupational health services as prescribed by the Occupational Health Services Act for all employees. The occupational health services are typically provided by enterprise-owned medical departments, by mutually owned health care centers, by private practitioners, or by municipal health care centers. The latter are required by law to provide all services as prescribed by the legislation to anyone who comes to the facility. This situation is prevalent in the countryside, where there are very few private caregiving centers. Declaring occupational accidents and disease cases is mandatory, and the Inspection districts examine all accidents to establish causes and consequences, and to initiate prosecution in case of criminal negligence. Labour Inspection Districts are also notified of the new occupational disease cases as they are declared to insurance companies. Insurance for occupational disease, accidents, and death is an obligation of the employer, although they can choose the insurance company. The medical confidentiality between the workers and their occupational health care providers is very strict. Official statistics are maintained by the state Statistics Finland organization, and they may be used, for example, for research purposes by scientific institutes like the Finnish Institute of Occupational Health. Construction industry accounts for 25% of all fatal accidents (120 cases per 1 million working hours), followed by mechanical, wood, metal, machinery, and pulp and paper industry (10% each of fatal accidents) with rates ranging from 100–160 cases per 1 million working hours. There are some 5,000 occupational disease cases per year (rate 22/10,000 employed). The major disease categories include repetitive strain injuries (1,300 cases), respiratory allergies (600 cases), occupational skin diseases (1,000 cases), and 900 cases of noise-caused hearing loss. In 1998, 589 cases of asbestos-related diseases were reported.     

森林地表火蔓延模拟方法及其计算机实现

进行了森林火蔓延的研究,对传统的经验公式和模型进行改进,明显发现改进的模型有更好的结果,用计算机巧妙准确地实现了模拟模型,在风力不是特别大,地形变化不是特别剧烈时,该模型有较高精度;并结合火蔓延的主要因素（气象因子、气候、地形等）,进行系统分析,写出算地,编制实现地表火蔓延的预测预报计算机系统软件。这对于有效的组织扑救、减少火灾损失、计算森林火灾的损失评估有重要意义。     

公路隧道火灾逃生疏散研究

以苍岭隧道为背景,首先采用经验计算理论和计算软件building EXODUS相结合的方式,从被困人员的安全疏散时间、高温烟气的影响、隧道横通道的利用率以及人员的疏散行为特性进行了研究。结果表明:中小规模火灾情况下的安全疏散时间控制在8 min之内,高温烟气影响不大,但横通道的利用率不平均,且人员疏散路线相对集中。然后对存在的逃生疏散问题提出针对性建议以及其他相关建议,旨在为更大程度降低事故的严重性和经济财产损失。