Accumulation of Cu, Cd, Cr, Mn and Pb from artificially contaminated soil by Bacopa Monnieri

The metal accumulation potential of Bacopa monnieri L. was assessed under simulated laboratory conditions. This study was carried out in mixed metals (Cu, Cd, Pb, Cr, Mn) condition and repeated exposures in artificial contaminated soil. The growing shoots were planted in garden subsoil containing 3, 16, 32, 64, 160 M each of the above metals. After 8 weeks, plants were refeeded to three times higher concentrations of each metal than initially used to assess the maximum accumulating potential of the metals. The accumulation of the metals by the root and shoot was concentration and duration dependent. The metal accumulation was considerably higher in the fine root than in the shoot and showed the following order : Mn > Cr > Cu > Cd > Pb. The plants showed high tolerance to the metals as no visible phytotoxic symptom was produced after 8 weeks. However, as a result of combined metal toxicity, chlorophyll content was reduced by 62% after 12 weeks. The highest metal concentration was lethal to the plant at 16 weeks. In view of their high tolerance, the plants of B. monnieri may be considered for the amelioration of industrially-polluted wetlands experiencing regular flushing of wastewaters.     

Assessment of Cu, Pb, and Zn contamination in sediment of north western Peninsular Malaysia by using sediment quality values and different geochemical indices

Surface sediments were collected from the north western aquatic area (13 intertidal sites and 5 river drainages) of Peninsular Malaysia, which were suspected to have received different anthropogenic sources. These sites included town areas, ports, fishing village, industrial areas, highway sides, jetties and some relatively unpolluted sites. The present study revealed that 4.79-32.91 μg/g dry weight for Cu, 15.85-61.56 μg/g dry weight for Pb, and 33.6-317.4 μg/g dry weight for Zn based on 13 intertidal surface sediments while those based on 5 river drainage surface sediments were 10.24-119.6 μg/g dry weight for Cu, 26.7-125.7 μg/g dry weight for Pb and 88.7-484.1 μg/g dry weight for Zn. In general, the metal levels in the drainage sediments are higher than in the intertidal sediments, suggesting dilution factor in the intertidal sediment and direct effluent from point sources in the drainage sediment. In particular, the total concentrations of Cu, Pb, and Zn for the sampling site at Kuala Kurau Town exceeded the Effect Range Median values for Cu, Pb, and Zn for assessments of sediment quality values for freshwater sediment as proposed by MacDonald et al. (Arch Environ Contam Toxicol 39:20-31, 2000), thus adverse biological effects would be observed above this level. Assessment using enrichment factor (using Fe as a normalizer) and geoaccumulation index showed that the three metals at Kuala Kurau Town and Juru Industry drainage were evidenced as having more enrichment and mostly due to non-natural sources. However, caution should be exercised that the interpretation can only become valid when the ratios, indices, and sediment quality values are combined. This is due to the fact that not all the established indices are applicable and, to a certain extent, some of them should be further revised and improved to suit a different metal for Malaysian sediment. Undoubtedly, sites near drainages at Kuala Kurau Town and Juru River Basin need greater attention to mitigate the heavy metal pollution in the future.     

A survey of Pb,Cu, Zn,Cd, Cr,As, and Se in earthworms and soil from diverse sites

Earthworms and soils were collected from 20 diverse sites in Maryland, Pennsylvania, and Virginia, and were analyzed for Pb, Cu, Zn, Cd, Cr, As, and Se. Correlation coefficients relating concentrations of the elements in earthworms to concentrations in soil were low (–0.20<r<+0.57). Species differences and ecological variables contributed to the variability in concentrations of these elements in earthworms. The maximum concentrations of Pb (2100 ppm), Zn (1600 ppm), Cd (23 ppm) and Se (7.6 ppm) detected in earthworms were in the range reported to be toxic to animals fed diets containing these elements; however, even in the absence of any environmental contamination, some species of earthworms may contain high concentrations of Pb, Zn, and Se. Earthworms of the genus Eisenoides, for example, were exceptional in their ability to concentrate Pb. When earthworms are used as indicators of environmental contamination, it is important to identify the species, to report the soil characteristics, and to collect similar earthworms from very similar but uncontaminated soil.     

A new organic-rich soil reference material certified for its EDTA- and acetic acid- extractable contents of Cd, Cr, Cu, Ni, Pb and Zn, following collaboratively tested and harmonised procedures

There is an increasing requirement for assessment of the bioavailable metal fraction and the mobility of trace elements in soils upon disposal. One of the approaches is the use of leaching procedures, but the results obtained are operationally defined; therefore, their significance is highly dependent on the extraction protocol performed. So, for this type of study, there is a need for reference materials that allow the quality of measurements to be controlled. This paper describes the steps involved in the certification of an organic-rich soil reference material, BCR-700, for the EDTA- and acetic acid-extractable contents of some trace elements, following collaboratively tested and harmonised extraction procedures. Details are given for the preparation of the soil, homogeneity and stability testing, analytical procedures and the statistical selection of data to be included in the certification.     

Environmentally safe sewage sludge disposal: the impact of liming on the behaviour of Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn

Dewatered sewage sludge containing relatively high total concentrations of Cr (945 micrograms ml-1), Cu (523 micrograms ml-1), Ni (1186 micrograms ml-1) and Zn (2950 micrograms ml-1) was treated with quicklime and sawdust for sludge disinfection and post-stabilisation. The mobility of the heavy metals in the sludge samples was assessed by applying a modified five-step Tessier sequential extraction procedure. Water was added as a first step for estimation of the proportion of the easily soluble metal fractions. To check the precision of the analytical work the concentrations of heavy metals in steps 1-6 of the extraction procedure were summed and compared to the total metal concentrations. The mass balance agreed within +/- 3% for Cd, Cu, Cr, and Zn and within +/- 5% for Ni, Pb, Fe and Mn. Data from the partitioning study indicate that in the lime-treated sludge at a pH of 12 the mobility of Cu and Ni notably increased with the solubilisation of these metals from their organic and/or carbonate and Fe and Mn oxide and hydroxide fractions, respectively. Liming slightly decreased the proportion of other heavy metals in the easily soluble fractions while its impact on the partitioning between other sludge phases was almost insignificant. Due to the increased solubility of Ni and Cu as well as potential Cr oxidation at high pH, liming cannot be recommended for sludge disinfection. Addition of sawdust did not change the heavy metal partitioning.     

M3法测定土壤有效态Cd、Cr、Pb和Ni

通过M3法对耕地土壤重金属的联合测定,为土壤重金属污染监测应用提供快速联合测定的方法。用M3法测定北方耕地土壤的有效Cd、Cr、Pb和Ni,通过对M3法与其他方法进行有效重金属测定值差异性及其相关性比较,与全量的浸出率分析等探讨M3法对耕地土壤有效重金属测定的特征。结果表明,M3法在《土壤环境质量标准》(GB 15618—1995)的土壤重金属含量范围内可以测定土壤有效态重金属Cd、Cr、Pb和Ni,且呈线性极显著相关。M3法与其他方法有效Cd、Cr、Pb和Ni有较好的相关性,与DTPA法呈极显著相关;与NaNO₃法除有效Pb外,呈极显著和显著相关;与HCl法除褐土和潮土的有效Pb外,也呈极显著和显著相关。M3法的有效态Cd、Cr、Pb和Ni的测定值均为最大。M3法对4种耕地土壤有效Cd、Cr、Pb和Ni的浸出率,因土壤类型不同,有效重金属含量所占比率不同,但利用M3法测定的有效态Cd、Cr、Pb和Ni的浸出率最大。     

Certification of the extractable contents of Cd, Cr, Cu, Ni, Pb and Zn in a freshwater sediment following a collaboratively tested and optimised three-step sequential extraction procedure

Sequential extraction procedures have been used during the last decades to study and determine trace element mobility in aquatic sediments. However, the results obtained are operationally defined and, therefore, the significance of the analytical results is related to the extraction scheme used. So, there is a need for suitable reference materials for this type of study to enable the validation of the methodologies and to control the quality of the measurements. This paper describes the preparation of a sediment reference material, BCR-701, the homogeneity and stability studies and the analytical work performed for the certification of the extractable contents of some trace elements, following a collaboratively tested and optimised sequential (three-step) extraction procedure. The paper contains all the results and gives the methods used to certify the extractable contents (mass fractions expressed as mg kg-1 on a dry matter basis) of Cd, Cr, Cu, Ni, Pb and Zn in all steps. Moreover, indicative values are given for the aqua regia extractable contents of the six elements in the sediment and the residue obtained after sequential extraction.     

Monitoring of Cr, Cu, Pb, V and Zn in polluted soils by laser induced breakdown spectroscopy (LIBS)

Laser Induced Breakdown Spectroscopy (LIBS) is a fast and multi-elemental analytical technique particularly suitable for the qualitative and quantitative analysis of heavy metals in solid samples, including environmental ones. Although LIBS is often recognised in the literature as a well-established analytical technique, results about quantitative analysis of elements in chemically complex matrices such as soils are quite contrasting. In this work, soil samples of various origins have been analyzed by LIBS and data compared to those obtained by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES). The emission intensities of one selected line for each of the five analytes (i.e., Cr, Cu, Pb, V, and Zn) were normalized to the background signal, and plotted as a function of the concentration values previously determined by ICP-OES. Data showed a good linearity for all calibration lines drawn, and the correlation between ICP-OES and LIBS was confirmed by the satisfactory agreement obtained between the corresponding values. Consequently, LIBS method can be used at least for metal monitoring in soils. In this respect, a simple method for the estimation of the soil pollution degree by heavy metals, based on the determination of an anthropogenic index, was proposed and determined for Cr and Zn.     

SI-traceable certification of Cu, Cr, Cd and Pb in sediment and fly ash candidate reference materials

Many fields in environmental analytical chemistry deal with very low limits and thresholds as set by governmental legislations or transnational regulations. The need for the accuracy, comparability and traceability of analytical measurements in environmental analytical chemistry has significantly increased and total uncertainties are even asked for by accreditation bodies of environmental laboratories. This paper addresses achieving these goals to guarantee accuracy, quality control, quality assurance or validation of a method by means of certified reference materials. The assessment of analytical results in certified reference materials must be as accurate as possible and every single step has to be fully evaluated. This paper presents the SI-traceable certification of Cu, Cr, Cd and Pb contents in geological and environmentally relevant matrices (three sediments and one fly ash sample). Certification was achieved using isotope dilution (ID) ICPMS as a primary method of measurement. In order to reduce significantly the number of analytical steps and intermediate samples a multiple spiking approach was developed. The full methodology is documented and total uncertainty budgets are calculated for all certified values. A non-element specific sample digestion process was optimised. All wet chemical digestion methods examined resulted in a more or less pronounced amount of precipitate. It is demonstrated that these precipitates originate mainly from secondary formation of fluorides (essentially CaF2) and that their formation takes place after isotopic equilibration. The contribution to the total uncertainty of the final values resulting from the formation of such precipitates was in general < 0.1% for all investigated elements. Other sources of uncertainty scrutinised included the moisture content determination, procedural blank determination, cross-contamination from the different spike materials, correction for spectral interferences, instrumental background and deadtime effects, as well as the use of either certified values or IUPAC data in the IDMS equation. The average elemental content in the sediment samples was 30-130 micrograms g-1 for Pb, 0.5-3 micrograms g-1 for Cd and 50-70 micrograms g-1 for Cu. Cr was measured in one sample and was about 60 micrograms g-1. The concentrations in the fly ash sample were up to 2 orders of magnitude higher. Expanded uncertainty for the investigated elements was about 3% (coverae factor k = 2) except for Cr, (measured by high resolution ICPMS), for which the expanded uncertainty was about 7% (k = 2).     

Determination of heavy metals (Cd, Cr, Cu, Fe, Ni, Pb, Zn) by ICP-OES and their speciation in Algerian Mediterranean Sea sediments after a five-stage sequential extraction procedure

Surface sediment samples (n = 18) were collected from the Algerian Mediterranean coasts and analyzed for seven metals using inductively coupled plasma-optical emission spectrometry in order to asses the distribution and bioavailability of metals and to study the anthropogenic factors affecting their concentrations. Sediment samples were size-fractionated into three sizes: 1,080–500 (coarse), 500–250 (medium), and <250 mm (fine). Bulk sediments were subjected to both sequential extraction and total digestion to evaluate the reliability of the sequential extraction procedure (SEP), while the fractions have been only sequentially extracted for metals speciation. The metals were sequentially extracted into five phases namely exchangeable (P1), carbonates (P2), Fe–Mn oxides (P3), organic (P4) and residual (P5). Metal recoveries in sequential extractions were ±20% of the independently measured total metal concentrations; the high recovery rates indicate the good reliability of the SEP used in this study. Correlation coefficients indicated that the grain size has an effect on the distribution of metals in the investigated samples. The order of metal levels in the fractions was medium > fine > coarse for all the metals. The average total extractable metal concentrations for Cd, Cr, Cu, Fe, Ni, Pb, and Zn were 1.1, 8.8, 4.7, 1,291.3, 13.9, 5.7 and 20.4 μg/g, respectively. The northeastern shelf had the lowest metal levels while the highest were in northwestern part mainly due to the significant tourism activities in the northwestern part. Comparison of our results to Earth’s crust values and to previous studies points out that our samples were relatively unpolluted with respect to the heavy metals investigated; most of the metals are not from anthropogenic sources. Enrichment factors as the criteria for examining the impact of the anthropogenic sources of heavy metals were calculated, and it was observed that the investigated samples were not contaminated with Cr, Cu, and Fe, moderately contaminated with Ni, Pb, and Cd, and contaminated with Cd in some sites. The P5 phase had the highest percents of Cr, Cu, Fe, Ni, and Zn. Cadmium and lead were predominant in the P4 phase, while Cu, Fe and Zn were distributed in the order P5 > P3 > P4 > P2 > P1. The following order of bioavailability was found with the heavy metals Pb > Cr > Cd > Ni > Zn > Cu > Fe.     

Competitive sorption of Cd, Cu, Mn, Ni, Pb and Zn in polluted and unpolluted calcareous soils

The objectives of this study were to investigate competitive sorption behaviour of heavy metals (Cd, Cu, Mn, Ni, Pb and Zn) under different management practices and identify soil characteristics that can be correlated with the retention and mobility of heavy metals using 65 calcareous soil samples. The lowest sorption was found for Mn and Ni in competition with the other metals, indicating the high mobility of these two cations. The Freundlich equation adequately described heavy metals adsorption. On the basis of Freundlich distribution coefficient, the selectivity sequence of the metal adsorption was Cu?>?Pb?>?Cd?>?Zn?>?Ni?>?Mn. The mean value of the joint distribution coefficient (K _dΣsp) was 182.1, 364.1, 414.7, 250.1, 277.7, 459.9 and 344.8 l kg^?1 for garden, garlic, pasture, potato, vegetables, wheat and polluted soils, respectively. The lowest observed K _dΣsp in garden soil samples was due to the lower cation exchange capacity and lower carbonate content. The results of the geochemical modelling under low and high metal addition indicated that Cd, Ni, Mn and Zn were mainly retained via adsorption, while Pb and Cu were retained via adsorption and precipitation. Stepwise forward regression analysis showed that clay, organic matter and CaCO₃ were the most important soil properties influencing competitive adsorption of Cd, Mn, Ni and Zn. The results in this study point to a relatively easy way to estimate distribution coefficient values.     

Determination of Cu, Pb, Zn, Ni, Co, Cd, and Mn in road dusts of Samsun City

The dust samples from 52 different locations in central roads of Samsun City were collected in a study area of 40 km long for the purpose of determining total metal concentrations of dust samples by flame atomic absorption spectrometry. The concentrations of Cu, Pb, Co, Zn, Ni, Mn, and Cd were found in the ranges of 11.92–352.43, 5.47–223.57, 4.52–41.69, 40.85–173.10, 18.71–131.29, 133.19–179.13, and 0.02–6.16 mg/kg, respectively. The results showed that metal levels were higher around the industrial area than other locations. Principal component analysis was also carried out to ascertain the possible contributing factors towards the metal concentrations. Validation of the analytical results was tested by analysis of the BCR 032 Moroccan phosphate rock certified reference material.     

Solid phase extraction of Cd,Pb, Ni,Cu, and Zn in environmental samples on multiwalled carbon nanotubes

A simple and sensitive solid phase extraction (SPE) method on multiwalled carbon nanotubes (MWCNTs) is presented for the determination of cadmium, lead, nickel, copper, and zinc at trace levels combined with flame atomic absorption spectrometry. The effects of parameters like pH, sample volume, sample and eluent flow rates, eluent concentration, and volume and type of eluent on the recovery of trace elements was examined. The metals retained on the nanotube at pH 6.5 as α-benzoin oxime complexes were eluted by 10 mL 2 M HNO₃ in acetone. The influence of matrix ions on the developed method was also evaluated. The preconcentration factor of the method was found to be 50. The detection limits for Cd(II), Pb(II), Ni(II), Cu(II), and Zn(II) were found as 1.7, 5.5, 6.0, 2.3, and 2.4 μg L^?1, respectively. To test the accuracy of the method, the method was applied to TMDA-70 fortified lake water and Spinach 1570A standard reference materials. Addition recovery studies were applied to tap water and cracked wheat samples, and determination of the analyte elements was carried out in some food samples with good results.     

江蓠对水体重金属铅镍的蓄积及生物修复研究

以活体细基江篱繁枝变型(Gracilariatunuistipitata var)作为研究材料,以Pb、Ni重金属离子为污染因子,通过室内静态模拟实验,综合利用等离子发射光谱仪,超速离心机.差速离心机等实验手段研究在单一离子污染胁迫下,江蓠对Pb、Ni重金属离子的短期去除效果,各重金属离子在其体内蓄积效应,江蓠质外体、...     

Comparing spatial and temporal changes in metal trends (Cr,Ni, Pb and Zn) on the Portuguese shelf since the 1970s

Comparison between an archive dataset, collected during the 1970s (1974–1977), and samples taken during the PALEO1 cruise (2002) enabled evaluation of large-scale and long-term spatiotemporal changes in Al, Cr, Ni, Pb and Zn contents in bulk surface sediments in four areas of the Portuguese shelf. The so-called gradient method (GM) with normalisation to Al, a proxy for terrigenous clay content, was applied. The studied areas are distributed from north to south along the western margin, with the northernmost located off shore the Ave and Douro rivers, a central one located off shore the Lis River and a southern one located off shore the Mira River. One-way ANOVA and Kruskal-Wallis tests were used to identify differences among study areas and periods of sample collection. A comparison of metal contents in 2002 samples with the Portuguese classification scheme regulation for deposition of dredged materials in coastal areas indicates good environmental quality in terms of Cr, Ni, Pb and Zn levels. Nevertheless, the GM results suggest an increase in metal loadings relative to Al from the 1970s to the 2002 samples (except for Pb). The Algarve area on the southern shelf is characterised by having high number of sites with metal level on class 2. These high values have traditionally been explained by a substantial supply of natural metals from the Guadiana, Tinto and Odiel rivers that drain areas Iberian Pyrite Belt formations. This supply has probably been magnified by present and past mining activities. For quality evaluation of marine sediments, especially when using total metal contents, this study shows the importance of considering all possible sources of metal loading. The natural grain size and composition variability have also a crucial influence on the metal content, and the combined evaluation allows a more holistic perspective.     

Distribution,bioavailability, and potential ecological risk of Cu,Pb, and Zn in soil in a potential groundwater source area

In this study, we examined three horizontal and vertical soil profiles along a sewage drainage ditch in order to determine the spatial distribution of Cu, Pb, and Zn in soils and to assess the bioavailability and potential ecological risks associated with these metals in a potential groundwater source area. Results showed that the concentrations of Cu, Pb, and Zn were approximately at background level, suggesting that human activities (industrial and agricultural pollution) had a negligible influence on these metals in soil, and that the concentrations reflected the natural background levels in the study area. Cu, Pb, and Zn concentrations were slightly higher in topsoil (0–20 cm) than deeper in the soil profile. Using a modified BCR sequential extraction method to evaluate the mobility and bioavailability of metals showed that the potential bioavailability sequence of Cu, Pb, and Zn at three depths in the soil profile was in the order Cu?≈?Pb?<?Zn. The potential ecological risk from the metals was evaluated using risk assessment code, and the results suggest that Cu and Zn pose no or low risk, while there is a low or medium risk from Pb. Results from groundwater monitoring showed that the groundwater was not polluted by leaching from soil.     

Chemical speciation and partitioning of trace metals (Cd, Co, Cu, Ni, Pb) in the lower Athabasca river and its tributaries (Alberta, Canada)

Concentrations of Cd, Co, Cu, Ni and Pb were measured in particulate and dissolved phases at 11 sites located upstream and near Athabasca oil sands development. The in situ discrimination between non-labile and labile dissolved metals was done using diffusive gradients in thin-films (DGT) devices. The DGT-labile fraction of Co and Ni was 30% lower near development sites whereas Cu, Cd and Pb showed minor changes spatially. It was found that an 8-fold increase in dissolved organic matter (DOM) near development induced a rapid decrease in DGT-labile metals. Dissolved metal concentrations were used along with DOM, major ions, nutrients, pH and conductivity to calculate the distribution of dissolved metal species using the speciation model WHAM. Labile-DGT metal concentrations agreed well with WHAM-predicted concentrations. It was also found that a significant amount of metals were associated with the non-DGT labile fraction (i.e. colloidal DOM) and colloid abundance was more important than suspended particulate matter abundance in influencing metal mobility near Athabasca oil soils development. Since changes in colloidal DOM levels are likely to be the result of surface mining activities, this confirms the serious effects of oil sands activities on metal biogeochemical cycles in the lower Athabasca River.