The evolving trends of landfill leachate treatment research over the past 45 years

Environmental Science and Pollution Research - Landfilling is one of the most prevalent waste management strategies on a global scale. However, one major drawback of landfills is the production of...     

Effects of long-term exposure to PM2.5 on years of life lost and expected life remaining in Ahvaz city,Iran (2008–2017)

Ambient air pollution is one of the most significant environmental problems, and many individuals around the world die each year prematurely from diseases caused by this type of pollution. PM_2.5 can transpire deep to the lungs and induce some dangerous health effects in humans. In this study, the health effects of long-term PM_2.5 were estimated on expected life remaining (ELR) and years of life lost (YLL) indices in Ahvaz city during the years 2008–2017 using the AirQ+ software developed by WHO. Values obtained from the PM_2.5 averaging, ELR, and YLL data were processed for the whole population in the age range of 0–64 and over 64. These values were entered into AirQ+ software. The mean annual concentration of PM_2.5 was highly variable, with the highest concentration being 70.72 μg/m³ in 2010 and the lowest 41.97 μg/m³ in 2014. In all studied years, the concentration of PM_2.5 with the variations between 4.2 to 7.07 times was higher than the WHO standard (10 μg/m³). Ahvaz city also did not experience any clean day during the 10-year period, and in 2010, there were 47 very unhealthy days and 27 dangerous days, i.e., the highest number of very unhealthy and dangerous days during the period. The results estimated that the highest and lowest YLL in the next 10 years for all ages groups would be 137,760.49 (2010) and 5035.52 (2014), respectively. Also, the ELR index was lower than the Iranian standard and EPA which was significantly correlated with the concentration of PM_2.5.

     

The influence of association of plant growth-promoting rhizobacteria and zero-valent iron nanoparticles on removal of antimony from soil by Trifolium repens

Using association of plants, nanomaterials, and plant growth-promoting bacteria (PGPR) is a novel approach in remediation of heavy metal-contaminated soils. Co-application of nanoscale zerovalent iron (nZVI) and PGPR to promote phytoremediation of Sb-contaminated soil was investigated in this study. Seedlings of Trifolium repens were exposed to different regimes of nZVI (0, 150, 300, 500, and 1000 mg/kg) and the PGPR, separately and in combination, to investigate the effects on plant growth, Sb uptake, and accumulation and physiological response of the plant in contaminated soil. Co-application of nZVI and PGPR had positive effects on plant establishment and growth in contaminated soil. Greater accumulation of Sb in the shoots compared to the roots of T. repens was observed in all treatments. Using nZVI significantly increased accumulation capacity of T. repens for Sb with the greatest accumulation capacity of 3896.4 μg per pot gained in the “PGPR+500 mg/kg nZVI” treatment. Adverse impacts of using 1000 mg/kg nZVI were found on plant growth and phytoremediation performance. Significant beneficial effect of integrated use of nZVI and PGPR on plant photosynthesis was detected. Co-application of nZVI and PGPR could reduce the required amounts of nZVI for successful phytoremediation of metalloid polluted soils. Intelligent uses of plants in accompany with nanomaterials and PGPR have great application prospects in removal of antimony from soil.

     

The interactions of Cr (VI) concentrations and amendments (biochar and manure) on growth and metal accumulation of two species of Salicornia in contaminated soil

Environmental Science and Pollution Research - Heavy metals are among the most dangerous contaminants in the environment. Organic components and plant species that can accumulate and stabilize...     

The effect of diazinon on blood glucose homeostasis: a systematic and meta-analysis study

Environmental Science and Pollution Research - Though evidence exists on the association between diazinon (DZN), an organophosphate pesticide, with hyperglycemia, contrasting reports also exist....     

Effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria: Soot-ceria contact and interfacial oxygen evolution

Ceria is widely used as a catalyst for soot combustion, but effects of Zr substitution on the reaction mechanism is ambiguous. The present work elucidates effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria. The nanostructured CeO₂, Ce_0.92Zr_0.08O₂, and Ce_0.84Zr_0.16O₂ composed of 5–6 nm crystallites display T_m-CO2 (the temperature at maximum CO₂ yield) at 383, 355, and 375°C under 10 vol.% O₂/N₂, respectively. The size of agglomerate decreases from 165.5 to 51.9–57.3 nm, which is beneficial for the soot-ceria contact. Moreover, Zr increases the amount of surface oxygen vacancies, generating more active oxygen (O₂^? and O^?) for soot oxidation. Thus, the activities of Ce_0.92Zr_0.08O₂ and Ce_0.84Zr_0.16O₂ in soot combustion are better than that of CeO₂. Although oxygen vacancies promote the migration of lattice O^2?, the enriched surface Zr also inhibits the mobility of lattice O^2?. Therefore, the T_m-CO2 of Ce_0.84Zr_0.16O₂ is higher than that of Ce_0.92Zr_0.08O₂. Based on reaction kinetic study, soot in direct contact with ceria preferentially decomposes with low activation energy, while the oxidation of isolated soot occurs through diffusion with high activation energy. The obtained findings provide new understanding on the soot combustion over nanoceria.     

Electrosorption and photocatalytic one-stage combined process using a new type of nanosized TiO2/activated charcoal plate electrode

In the present study, an activated charcoal (AC) plate was prepared by physical activation method. Its surface was coated with TiO₂ nanoparticles by electrophoretic deposition (EPD) method. The average crystallite size of TiO₂ nanoparticles was determined approximately 28 nm. The nature of prepared electrode was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller (BET) surface area measurement before and after immobilization. The electrosorption and photocatalytic one-stage combined process was investigated in degradation of Lanasol Red 5B (LR5B), and the effect of dye concentration, electrolyte concentration, pH, voltage, and contact time was optimized and modeled using response surface methodology (RSM) approach. The dye concentration of 30 mg L^?1, Na₂SO₄ concentration of 4.38 g L^?1, pH of 4, voltage of 250 mV, and contact time of 120 min were determined as optimum conditions. Decolorization efficiency increased in combined process to 85.65 % at optimum conditions compared to 66.03 % in TiO₂/AC photocatalytic, 20.09 % in TiO₂/AC electrosorption, and 1.91 % in AC photocatalytic processes.     

Three-dimensional analysis of coherent turbulent flow structure around a single circular bridge pier

The coherent turbulent flow around a single circular bridge pier and its effects on the bed scouring pattern is investigated in this study. The coherent turbulent flow and associated shear stresses play a major role in sediment entrainment from the bed particularly around a bridge pier where complex vortex structures exist. The conventional two-dimensional quadrant analysis of the bursting process is unable to define sediment entrainment, particularly where fully three-dimensional flow structures exist. In this paper, three-dimensional octant analysis was used to improve understanding of the role of bursting events in the process of particle entrainment. In this study, the three-dimensional velocity of flow was measured at 102 points near the bed of an open channel using an Acoustic Doppler Velocity meter (Micro-ADV). The pattern of bed scouring was measured during the experiment. The velocity data were analysed using the Markov process to investigate the sequential occurrence of bursting events and to determine the transition probability of the bursting events. The results showed that external sweep and internal ejection events were an effective mechanism for sediment entrainment around a single circular bridge pier. The results are useful in understanding scour patterns around bridge piers.     

Spatial patterns of heavy metals in soil under different geological structures and land uses for assessing metal enrichments

One hundred and thirty composite soil samples were collected from Hamedan county, Iran to characterize the spatial distribution and trace the sources of heavy metals including As, Cd, Co, Cr, Cu, Ni, Pb, V, Zn, and Fe. The multivariate gap statistical analysis was used; for interrelation of spatial patterns of pollution, the disjunctive kriging and geoenrichment factor (EF_G) techniques were applied. Heavy metals and soil properties were grouped using agglomerative hierarchical clustering and gap statistic. Principal component analysis was used for identification of the source of metals in a set of data. Geostatistics was used for the geospatial data processing. Based on the comparison between the original data and background values of the ten metals, the disjunctive kriging and EF_G techniques were used to quantify their geospatial patterns and assess the contamination levels of the heavy metals. The spatial distribution map combined with the statistical analysis showed that the main source of Cr, Co, Ni, Zn, Pb, and V in group A land use (agriculture, rocky, and urban) was geogenic; the origin of As, Cd, and Cu was industrial and agricultural activities (anthropogenic sources). In group B land use (rangeland and orchards), the origin of metals (Cr, Co, Ni, Zn, and V) was mainly controlled by natural factors and As, Cd, Cu, and Pb had been added by organic factors. In group C land use (water), the origin of most heavy metals is natural without anthropogenic sources. The Cd and As pollution was relatively more serious in different land use. The EF_G technique used confirmed the anthropogenic influence of heavy metal pollution. All metals showed concentrations substantially higher than their background values, suggesting anthropogenic pollution.     

Estimation of maximum scour depths at upstream of front and rear piers for two in-line circular columns

Previous investigations indicate that scour around bridge piers is one of the most important factors for the failure of waterway bridges. Hence, it is essential to determine the accurate scour depth around the bridge piers. Most of the previous studies were based on scour around a single pier; however, in practice, new bridges are usually wide and then piers comprise two circular piers aligned in the flow direction that together support the loading of the structure. In this study, the effect on maximum scour depth of the spacing between two piers aligned in the flow direction was investigated experimentally under clear water scour conditions. The results show that the maximum scour depth at upstream of the front pier occurs when the spacing between the two piers is 2.5 times the diameter of the pier. Two semi empirical equations have been developed to predict the maximum scour depth at upstream of both front and rear piers as a function of the spacing between the piers, in terms of a pier-spacing factor. If the new equations for the pier-spacing factor are used with some of the existing equations for scour at a single pier, the predicted scouring depths are in good agreement with observed results. The S/M equation exhibited the best performance among the various equations tested and was recommended for use in prediction of the equilibrium scour depth. The findings of this study can be used to facilitate the positioning of piers when scouring is a design concern.