Analysis of BTEX and other substituted benzenes in water using headspace SPME-GC-FID: method validation

The analysis of BTEX and other substituted benzenes in water samples using solid phase microextraction (SPME) and quantification by gas chromatography with flame ionization detection (GC-FID) was validated. The best analytical conditions were obtained using PDMS/DVB/CAR fibre using headspace extraction (HS-SPME) at 50 [degree]C for 20 min without stirring. The linear range for each compound by HS-SPME with GC/FID was defined. The detection limits for these compounds obtained with PDMS/DVB/CAR fibre and GC/FID were: benzene (15 ng L(-1)), toluene (160 ng L(-1)), monochlorobenzene (54 ng L(-1)), ethylbenzene (32 ng L(-1)), m-xylene (56 ng L(-1)), p-xylene (69 ng L(-1)), styrene (35 ng L(-1)), o-xylene (42 ng L(-1)), m-dichlorobenzene (180 ng L(-1)), p-dichlorobenzene (230 ng L(-1)), o-dichlorobenzene (250 ng L(-1)) and trichlorobenzene (260 ng L(-1)). This headspace SPME-GC-FID method was compared with a previously validated method of analysis using closed-loop-stripping analysis (CLSA). The headspace SPME-GC-FID method is suitable for monitoring the production and distribution of potable water and was used, in field trials, for the analysis of samples from main intakes of water (surface or underground) and from the water supply system of a large area (Lisbon and neighbouring municipalities).     

Hybridization between wheat (Triticum aestivum) and the wild species Aegilops geniculata and A. biuncialis under experimental field conditions

Hybridization between Aegilops geniculata, A. biuncialis and bread wheat Triticum aestivum has been evaluated during two seasons under simulated field conditions to estimate the field hybridization rate under Central Spain conditions. The mean frequencies of hybridization between A. biuncialis and A. geniculata with wheat were 0.34% and 0.31%, respectively. Data from 10 hybrid plants for each combination showed that hybrids can be partially fertile by backcrossing with wheat parent, with percent averages of 3.17 grains/spikelets for A. biuncialis × wheat hybrids and 2.87 grains/spikelets for A. geniculata × wheat hybrids. Self-pollination, although at very low rates, was also possible in hybrids. The potential risks associated with natural hybridization in the context of transgenic wheat cultivation are discussed.     

Activity of biotin-dependent and gaba metabolizing enzymes in chorionic villus samples: Potential for 1st trimester prenatal diagnosis

We have documented the presence of five mitochondrial enzymes in samples of chorionic villus tissue and measured the levels of activity. Three of the enzymes catalyse biotindependent reactions. These are propionyl-CoA carboxylase, 3-methylcrotonyl-CoA carboxylase and pyruvate carboxylase. the other enzymes. 4-aminobutyric acid aminotransferase and succinic semialdehyde dehydrogenase, are involved inthe degradation of the central inhibitory neurotransmitter GABA. Distinct diseases in whichthere is deficiency of each of these enzymes have been documented in man. Significant levels of activity were observed for all five enzymes in chorionic villus tissue. This methodology should permit early prenatal diagnosis of deficiencies of these enzymes by chorionic villus biopsy in the first trimester.     

Transabdominal chorionic villus sampling: Analysis of 350 consecutive cases

We report a series of 350 patients submitted to transabdominal chorionic villus sampling (CVS). A technique using two ultrasound-guided needles and a suction pump was used. In most cases, the procedure was performed between 9 and 13 weeks. Twenty-one pregnancies were selectively terminated; nine spontaneous abortions followed the procedure and one fetal loss after 28 weeks was recorded; 153 pregnancies are in progress and 169 delivered fetuses are alive and well. Transabdominal biopsy is a feasible and effective technique for CVS.     

Selective collection as a pretreatment for indirect solid recovered fuel generation

Effective selective collection (SC) has been increasing in many countries of the European Union. As a consequence the composition of residual municipal solid waste (RMSW) is changing not only because of economic development, but also due to the collection system. The input of RMSW treatment plants is thus not homogeneous. This paper analyses two case studies involving a total of five SC scenarios and their impact on the generation of solid recovered fuel (SRF) with/without bio-drying, post-treatment and packaging take back programs (TBPs). These case studies are based on two types of SC: kerbside and drop-off. The latest regulation on SRF classification is taken into account: energy content, Cl and Hg concentrations are assessed and discussed. The role of the respirometric index (RI) is also analyzed. Results show that when SC is highly efficient RMSW can be classified directly as SRF, but only if the introduction of RI does not set stringent respirometric targets. The role of packaging TBPs is important as the residual waste remaining after the packaging has been processed, can be valorized increasing the lower heating value (LHV) of the residual RMSW and minimizing the streams that should be landfilled. The source separation of food waste has a significant impact on the suitability of bio-drying: when the SC of food waste is very efficient, its percentage in the RMSW may be too low for effective bio-drying.     

Environmental cost of using poor decision metrics to prioritize environmental projects

Conservation decision makers commonly use project‐scoring metrics that are inconsistent with theory on optimal ranking of projects. As a result, there may often be a loss of environmental benefits. We estimated the magnitudes of these losses for various metrics that deviate from theory in ways that are common in practice. These metrics included cases where relevant variables were omitted from the benefits metric, project costs were omitted, and benefits were calculated using a faulty functional form. We estimated distributions of parameters from 129 environmental projects from Australia, New Zealand, and Italy for which detailed analyses had been completed previously. The cost of using poor prioritization metrics (in terms of lost environmental values) was often high—up to 80% in the scenarios we examined. The cost in percentage terms was greater when the budget was smaller. The most costly errors were omitting information about environmental values (up to 31% loss of environmental values), omitting project costs (up to 35% loss), omitting the effectiveness of management actions (up to 9% loss), and using a weighted‐additive decision metric for variables that should be multiplied (up to 23% loss). The latter 3 are errors that occur commonly in real‐world decision metrics, in combination often reducing potential benefits from conservation investments by 30–50%. Uncertainty about parameter values also reduced the benefits from investments in conservation projects but often not by as much as faulty prioritization metrics.     

Dimethoate induces genotoxicity as a result of oxidative stress: in vivo and in vitro studies

Environmental Science and Pollution Research - Dimethoate ([O,O-dimethyl S-(N-methylcarbamoylmethyl) phosphorodithioate]) is an organophosphate insecticide and acaricide widely used for...     

Ecotoxicity interspecies study of ionic liquids based on phosphonium and ammonium cations

Environmental Science and Pollution Research - This work studies the effects of different bromide-based ionic liquids, with phosphonium and ammonium cations, towards several environmental...     

Quantitative gap analysis for the West Coast of Florida based on experts’ opinion

The primary objective of this study was to identify gaps in coastal and marine data available through the Gulf Geospatial Assessment of Marine Ecosystems (GAME) project for the west coast of Florida. A survey was designed and sent to more than 2,000 experts working with coastal and ocean issues in the Gulf of Mexico to elicit their opinions. The survey asked the experts to rank 12 data categories and score the relevance of four qualifiers (spatial resolution, temporal resolution, age of data, and level of detail) using a discrete choice approach. The statistical interpretation of experts?? responses allowed assigning a relative value to each available data set, based upon their qualifiers. The results were then displayed in a Geographic Information System to visually show how the total value for all data categories or for a specific data category varies spatially and to identify data gaps. It was found that the total data set value is generally higher within Tampa Bay and along the coast. Areas with low total value show a lack of data sets that have qualifiers falling within the ideal range, as per experts?? opinions. The gap maps created for this project are useful to identify priority areas where money should be invested for future data collection.     

Heavy metal distribution and speciation in the Northern Adriatic Sea

In the present study the concentrations of cobalt, copper, iron, manganese, zinc were analysed and the speciation of copper and zinc performed, with a summer and winter sampling, for two areas in the Northern Adriatic Sea and crossing at the farthest zones of the Po river-sea water interface. Results show that when salinity increases the concentrations of all investigated metals (with the exception of cobalt) present some degree of biogeochemical cycling. Copper is the element whose dissolved phase has the highest importance in metal transport across the salinity gradient. Results of speciation analysis demonstrate that the presence of excess amounts (5-8 fold) of unbound ligands confers a buffering capacity for potential inputs of dissolved metals into the Northern Adriatic Sea. The speciation of both copper and zinc in the dissolved phase was dominated by organic complexation.