Zn, Cd and Pb accumulation and arbuscular mycorrhizal colonisation of pennycress Thlaspi praecox Wulf. (Brassicaceae) from the vicinity of a lead mine and smelter in Slovenia

Significant hyperaccumulation of Zn, Cd and Pb in field samples of Thlaspi praecox Wulf. collected from a heavy metal polluted area in Slovenia was found, with maximal shoot concentrations of 14,590 mg kg(-1) Zn, 5960 mg kg(-1) Cd and 3500 mg kg(-1) Pb. Shoot/root ratios of 9.6 for Zn and 5.6 for Cd show that the metals were preferentially transported to the shoots. Shoot bioaccumulation factors exceeded total soil Cd levels 75-fold and total soil Zn levels 20-fold, further supporting the hyperaccumulation of Cd and Zn. Eighty percent of Pb was retained in roots, thus indicating exclusion as a tolerance strategy for Pb. Low level colonisation with arbuscular mycorrhizal fungi (AMF) of a Paris type was observed at the polluted site, whereas at the non-polluted site Arum type colonisation was more common. To our knowledge this is the first report of Cd hyperaccumulation and AMF colonisation in metal hyperaccumulating T. praecox.     

Comparison of a two-stage sampling design and its composite sample alternative: An application to soil studies

The objective of a long-term soil survey is to determine the mean concentrations of several chemical parameters for the pre-defined soil layers and to compare them with the corresponding values in the past. A two-stage random sampling procedure is used to achieve this goal. In the first step, n subplots are selected from N subplots by simple random sampling without replacement; in the second step, m sampling sites are chosen within each of the n selected subplots. Thus n · m soil samples are collected for each soil layer. The idea of the composite sample design comes from the challenge of reducing very expensive laboratory analyses: m laboratory samples from one subplot and one soil layer are physically mixed to form a composite sample. From each of the n selected subplots, one composite sample per soil layer is analyzed in the laboratory, thus n per soil layer in total. In this paper we show that the cost is reduced by the factor m — 1 when instead of the two-stage sampling its composite sample alternative is used; however, the variance of the composite sample mean is increased. In the case of positive intraclass correlation the increase is less than 12.5%; in the case of negative intraclass correlation the increase depends on the properties of the variable as well. For the univariate case we derive the optimal number of subplots and sampling sites. A case study is discussed at the end.     

Environment contamination by mycotoxins and their occurrence in food and feed: Physiological aspects and economical approach

The contamination of food and feed by mycotoxins as toxic metabolites of fungi is a risk not only for consumers resulting in various embarrassment regarding health status and well-being, but also for producers, companies and export market on the ground of economic losses and ruined stability of economic trade. As it is given in historical evidence, the contamination of food by mycotoxins is a topic as old as a history of mankind, finding some evidence even in the ancient books and records. Nowadays, the mycotoxins are used in modern biotechnological laboratories and are considered an agent for targeting the specific cells (e.g., defected cells to eliminate them). However, this promising procedure is only the beginning. More concern is focused on mycotoxins as abiotic hazard agents. The dealing with them, systematic monitoring, and development of techniques for their elimination from agricultural commodities are worldwide issues concerning all countries. They can be found alone or in co-occurrence with other mycotoxins. Thus, this review aims to provide widened information regarding mycotoxins contamination in environment with the consequences on health of animals and humans. The inevitability for more data that correctly determine the risk points linked to mycotoxins occurrence and their specific reactions in the environment is demonstrated. This review includes various symptoms in animals and humans that result from mycotoxin exposure. For better understanding of mycotoxin's impact on animals, the sensitivities of various animal species to various mycotoxins are listed. Strategies for elimination and preventing the risks of mycotoxins contamination as well as economical approach are discussed. To complete the topic, some data from past as historical evidences are presented.     

Road-traffic noise and factors influencing noise annoyance in an urban population

Noise annoyance is influenced by sound-related factors: type of noise, noise level and frequency, and person-related factors—physiological, psychological, and social factors. Prior to implementation of the Directive 2002/49/EC of the European Parliament and of the Council in Serbia, there was a need for the first comprehensive study on noise annoyance in Serbian urban population. The aim of this study was to determine principal factors for high noise annoyance in an adult urban population and to assess their predictive value. A cross-sectional study was performed on 3097 adult residents of a downtown municipality in Belgrade (1217 men and 1880 women), aged 18–96 years. Equivalent noise levels [Leq (dBA)] were measured during day, evening and night in all streets of the municipality. Noise annoyance was estimated using self-reported annoyance scale. Noise annoyance showed strong correlation with noise levels, personal characteristics and some housing conditions. Dose–response relationship was found between the percentage of highly annoyed residents and Lden. Logistic regression model identified increased risk for a high level of noise annoyance with regard to: orientation of living room/bedroom toward the street (Odds Ratio = 2.60; 95% Confidence Interval = 2.04–3.31), duration of stay at apartment during the day [OR = 1.04, 95%CI = 1.02–1.06 (per hour)], noise sensitivity [OR = 1.04, 95%CI = 1.03–1.04 (per scale unit)], and nighttime road-traffic noise level [OR = 1.03, 95%CI = 1.02–1.04 (per decibel)].     

Incomes,Attitudes, and Occurrences of Invasive Species: An Application to Signal Crayfish in Sweden

This article analyzes and carries out an econometric test of the explanatory power of economic and attitude variables for occurrences of the nonnative signal crayfish in Swedish waters. Signal crayfish are a carrier of plague which threatens the native noble crayfish with extinction. Crayfish are associated with recreational and cultural traditions in Sweden, which may run against environmental preferences for preserving native species. Econometric analysis is carried out using panel data at the municipality level with economic factors and attitudes as explanatory variables, which are derived from a simple dynamic harvesting model. A log-normal model is used for the regression analysis, and the results indicate significant impacts on occurrences of waters with signal crayfish of changes in both economic and attitude variables. Variables reflecting environmental and recreational preferences have unexpected signs, where the former variable has a positive and the latter a negative impact on occurrences of waters with signal crayfish. These effects are, however, counteracted by their respective interaction effect with income.     

Phyto/rhizoremediation studies using long-term PCB-contaminated soil

Purpose  

Polychlorinated biphenyls (PCBs) represent a large group of recalcitrant environmental pollutants, differing in the number of chlorine atoms bound to biphenyl ring. Due to their excellent technological properties, PCBs were used as heat-transfer media, for filling transformers and condensers, as paint additives, etc. With increasing knowledge of their toxicity, transfer to food chains and accumulation in living organisms, their production ended in most countries in the 1970s and in 1984 in the former Czechoslovakia. But even a quarter of century after the PCB production ceased, from contaminated areas, the volatile PCBs evaporate and contaminate much larger areas even at very distant parts of the world. For this reason, PCBs still represent a global problem. The main method of PCB removal from contaminated environment is at present the expensive incineration at high temperatures. With the aim of finding effective alternative approaches, we are studying biological methods for PCB removal from the environment. In this paper, we summarise 10 years of studies using long-term PCB-contaminated soil from a dumpsite in South Bohemia, targeted for the use of plants (phytoremediation) and their cooperation with microorganisms in the root zone (rhizoremediation).     

Virus Genome Quantification Does not Predict Norovirus Infectivity After Application of Food Inactivation Processing Technologies

When determining the effect of food processing on the infectivity of any contaminating virus, it is necessary to distinguish unambiguously between infectious and non-infectious viruses present. However, this can be difficult in the particular case of noroviruses (NoVs) because no reliable cell culture model is available. The aim of this study was to assess the use of molecular methods—RT real-time PCR (RT-qPCR) and enzymatic treatment (ET) coupled to RT-qPCR—to quantify the infectivity of NoV after application of various inactivating food-processing technologies. RT-qPCR and ET-RT-qPCR gave significantly different (P < 0.01) results concerning the reduction in viral genome counts by all inactivation procedures and conditions used, except for HHP treatment at 600 MPa for 5 min. These findings indicate that the ET prior to RT-qPCR has an effect on the estimation of the reduction of virus genome counts, and may eliminate genomes of affected virus particles. However, no correlation was found between the results obtained by ET-RT-qPCR and those obtained by cell culture. Therefore, the effect is presumably only partial, and not adequate to allow accurate estimation of virus inactivation. Consequently, our results indicate that the quantification of virus genomes by PCR, regardless of prior ET, is not adequate for establishing virus inactivation and/or infectivity. In addition, our results also illustrate that the general effect of virus inactivation is not directly correlated to effects on the integrity of virus genome and protein capsid. Presumably, inactivation by food processing is the consequence of effects on proteins involved in adhesion and invasion stages.     

Screening risk areas for sediment and phosphorus losses to improve placement of mitigation measures

Identification of vulnerable arable areas to phosphorus (P) losses is needed to effectively implement mitigation measures. Indicators for source (soil test P, STP), potential mobilization by erosion (soil dispersion), and transport (unit-stream power length-slope, LS) risks were used to screen the vulnerability to suspended solids (SS) and P losses in two contrasting catchments regarding topography, soil textural distribution, and STP. Soils in the first catchment ranged from loamy sand to clay loam, while clay soils were dominant in the second catchment. Long-term SS and total P losses were higher in the second catchment in spite of significantly lower topsoil STP. A higher proportion of areas in the second catchment were identified with higher risk due to the significantly higher risk of overland flow generation (LS) and a significantly higher mobilization risk in the soil dispersion laboratory tests. A simple screening method was presented to improve the placement of mitigation measures.