Distribution of nuclear bomb Pu in Nishiyama area, Nagasaki, estimated by accurate and precise determination of 240Pu/239Pu ratio in soils

Plutonium isotopes in forest soils collected in Nishiyama area, Nagasaki, were successfully determined by high resolution inductively coupled plasma mass spectrometry after the treatment with a microwave decomposition system. The (240)Pu/(239)Pu atom ratios observed in the samples in the Nishiyama area were obviously lower than the range of the global fallout. The low ratios (minimum 0.032) observed in Nishiyama area indicated the influence of detonation of the Pu nuclear weapon in 1945. Since the area is contaminated also by global fallout, the (240)Pu/(239)Pu atom ratio can be more sensitive indicator of bomb-derived Pu than Pu activity concentration.     

Synthesis of hydrogarnet from molten slag and its hydrogen chloride fixation performance at high temperature

Hydrogarnet was synthesized hydrothermally below 200°C using molten slag obtained from municipal solid waste. For comparison, it was also synthesized using pure-phase CaO–Al₂O₃–SiO₂–H₂O, as reported previously. The structural and textural properties of this material were investigated using various analytical and spectroscopic techniques such as X-ray diffraction, X-ray fluorescence spectrometry, atomic absorption spectrometry (AAS), thermogravimetry/differential thermal analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. The Cl⁻ fixation ability of hydrogarnet was investigated in the temperature range 500–800°C in a fixed-bed flow reactor using a HCl concentration (1000 p.p.m.v.) similar to that of incinerator exhaust gas. Under these experimental conditions, the hydrogarnet was capable of reducing the HCl gas level to less than 1 p.p.m.v. Analysis of the spent catalyst revealed that the hydrogarnet was being transformed into wadalite and CaCl₂ at high temperatures. The elution test for chromium ions in hydrogarnet obtained from slag was also used, and it was found that chromium ions were not eluted from hydrogarnet. Received: January 27, 2001 / Accepted: October 11, 2001     

Catalytic decomposition of hydrocarbon into hydrogen and carbon in a spouted-bed reactor as the second-stage reactor of a plastic recycling process

A two-stage process for the chemical recycling of plastics is proposed. In this process, which consists of two reactors, plastics are converted into hydrogen and carbon. In the first reactor, plastic chips are thermally decomposed into hydrocarbons. In the second reactor, the hydrocarbons formed in the first reactor are catalytically decomposed into carbon and hydrogen. In this study, in order to obtain basic data for the second reactor, propene was catalytically decomposed in a laboratory-scale spouted-bed reactor (600mm high, 21.6mm internal diameter, made of SUS304). The effect of the type of spouting medium used on the decomposition behavior of propene was investigated using four types of spouting medium (nickel-plated -alumina, palladium-plated -alumina, nickel-impregnated -alumina, and -alumina). The nickel-impregnated -alumina gave the best propene conversion and hydrogen yield.     

Effect of phosphate addition on the sorption-desorption reaction of selenium in Japanese agricultural soils

Desorption levels of soil-sorbed selenium (Se) were studied by adding phosphate to 22 typical Japanese agricultural soils. Soil-soil solution distribution coefficients of Se (Kd-Se) were measured using a batch process as an index of Se sorption level, adding 75Se as a tracer. After the Kd measurement, extraction of soil-sorbed 75Se with a 0.1 M or 1 M Na2HPO4 solution followed to determine the amount of 75Se desorbed by the phosphate. When the 0.1 M Na2HPO4 solution was used, 18-70% of soil-sorbed Se was extracted (average: 47%). However, when the 1 M Na2HPO4 solution was used, 27-83% of soil-sorbed Se was extracted (average: 57%). The observed 75Se desorption percentage indicated the maximum Se removability by phosphate addition. The desorption percentage of Se with 1 M Na2HPO4 correlated with Kd-Se values, suggesting that the soil sample with higher Kd-Se contained more reactive components for phosphate-sorption than the soil sample with lower Kd-Se. To evaluate the effect of phosphate concentration on the Se sorption, the Kd-Se was measured for two typical soils under different levels of phosphate (0.1-10 mM PO4). The Kd values were decreased by phosphate addition for both soils. The Kd decrease was observed even for just 1 mM PO4. The phosphate addition with 1 mM PO4 is the same level as in P fertilizer applied to paddy fields in Japan. Therefore, it was suggested that Se desorption should occur in Japanese soils due to the phosphate input.     

Age-related settlement success by cyprids of the barnacleBalanus amphitrite,with special reference to consumption of cyprid storage protein

Newly molted (0-d-old) cyprids of the barnacleBalanus amphitrite Darwin were prevented from settling for 0 to 14 d at four different temperatures (25, 20, 15 and 5°C treatments). The effect on settlement success of prolonging the cyprid lifetime was evaluated using a nitrilocellulose membrane assay. In addition, protein extract prepared from these cyprids was analyzed using gel electrophoresis to characterize the effect of age on protein content and composition. Settlement success was significantly affected for larvae aged at 25 (P < 0.001), 20 (P < 0.001) and 15°C (P < 0.05), while differences in settlement success between age groups was negligible at 5°C (P = 0.09). Settlement success of cyprids increased with time for up to 3 d (P < 0.001, Phase 1), following which settlement success significantly declined (P < 0.001, Phase 11). Temperature had no significant effect on settlement in Phase I (P = 0.17), but did enhance the decline in settlement success with age during Phase II (P < 0.001). Gel electrophoresis revealed a significant decline in the quantity of the cyprid storage protein CMP (Cyprid Major Protein) with increasing age at 25, 20 and 15°C, but CMP levels remained constant at 5°C. These results suggest that, upon molting to the cyprid stage, larvae may still require a settlement-competence attainment period. This may be achieved by CMP utilization during Phase I, depletion of which during Phase II may be responsible for reduction in settlement success with cyprid age such that remaining CMP stores can no longer support the production of adult structures following settlement.     

Population genetic structures of the fissiparous seastar Coscinasterias acutispina in the Sea of Japan

The morphological characteristics and the population genetic structures of the fissiparous seastar Coscinasterias acutispina were investigated for eight sites in the Sea of Japan in order to clarify the presence of sexual and asexual reproduction. Morphological observation based on arm length showed that fission was common at all eight sites examined, indicating the likely production of clonal individuals. A random amplified polymorphic DNA (RAPD) marker was used to detect clones arising by fission and to assess gene flow among sites. A simulation approach using RAPD data revealed the presence of clonal individuals at almost all sites, suggesting the existence of asexual reproduction. The result of phylogenetic analysis according to RAPD genotype showed no relationship between genetic and geographic distances. Considering the limited movement ability of seastar species during the adult phase, these observations suggest the existence of marked gene flow among sites, due to dispersal of planktonic larvae produced by sexual reproduction. These observations suggest that multi-locus genotypic compositions depend on the relative amounts of recruitment from sexual and asexual reproduction in each population.     

Formation of PCDDs and PCDFs during the combustion of polyvinylidene chloride

In laboratory-scale combustion of polyvinylidene chloride (PVDC) with a quartz tubular furnace designed and fabricated to provide the desired combustion temperature and mixing state of combustion gas with air, it was found that at 800 degrees C or higher the level of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans [corrected] (PCDDs/PCDFs) resulting from PVDC combustion was no higher than that from heating air alone, and thus far below the levels which resulted from PVDC combustion at 750 degrees C or lower. The results provide the first laboratory confirmation of the relation between PVDC incineration temperature and PCDD/PCDF formation, and of the primary importance of high temperature, turbulence for mixing between air and combustion gas, and sufficient residence time, as governing factors for the minimization of PCDD/PCDF formation in municipal solid waste incinerators.     

De novo formation characteristics of dioxins in the dry zone of an iron ore sintering bed

The objectives of this work are to understand the details of the mechanism of dioxin formation in the part of a sintering bed termed the dry zone, and to obtain ideas on how to prevent their formation. Sinter mixtures of various composition types were heated in a packed bed reactor, and dioxins in the outlet gas and in the sinter mixture residue were measured. The dioxin formation potential of a simple sinter mixture composed of iron ore, coke and limestone was markedly lower than that of fly ash from a municipal solid waste incinerator (MSWI). In consideration of this result, a series of experiments were conducted using a sinter mixture impregnated with CuCl2. Experimental results showed that dioxin formation was temperature-dependent in the range of 300-550 degrees C, with the maximum observed at around 300 degrees C, which was quite similar to that of fly ash from the MSWI. The homologue distribution of PCDD/Fs in gas and solid reflected the possible difference in carbonaceous materials in coke and activated coke. Gaseous hydrogen chloride acted as a chlorinating reagent for dioxin formation.     

PIXE trace element analysis of an aquatic plant as indicator of heavy metal pollution

A new way of detecting trace elements in water is developed by using charged $\text{P}$article $\text{I}$nduced $\text{X}$-ray $\text{E}$mission (PIXE) analysis of cell walls of $\text{Chara corallina}$, a fresh water alga.