Plutonium isotopes concentration in seawater and bottom sediment off the Pacific coast of Aomori sea area during 1991-2005

A radioactivity survey was launched in 1991 to determine the background levels of ^239+240Pu in the marine environment off a commercial spent nuclear fuel reprocessing plant before full operation of the facility. Particular attention was focused on the ²⁴⁰Pu/²³⁹Pu atom ratio in seawater and bottom sediment to identify the origins of Pu isotopes. The concentration of ^239+240Pu was almost uniform in surface water, decreasing slowly over time. Conversely, the ^239+240Pu concentration varied markedly in the bottom water and was dependent upon the sampling point, with higher concentrations of ^239+240Pu observed in the bottom water sample at sampling points having greater depth. The ²⁴⁰Pu/²³⁹Pu atom ratio in the seawater and sediment samples was higher than that of global fallout Pu, and comparable with the data in the other sea area around Japan which has likely been affected by close-in fallout Pu originating from the Pacific Proving Grounds. The ²⁴⁰Pu/²³⁹Pu atom ratio in bottom sediment samples decreased with sea depth. The land-originated Pu is not considered as the reason of the increasing ^239+240Pu concentration and also decreasing the ²⁴⁰Pu/²³⁹Pu atom ratio with sea depth, and further study is required to clarify it.     

Effects of washing with water on enzymatic saccharification and d-lactic acid production from steam-exploded sugarcane bagasse

This study investigated the production of d-lactic acid from unutilized sugarcane bagasse using steam explosion pretreatment. The optimal steam pressure for a steaming time of 5?min was determined. The steam-exploded sugarcane bagasse was hydrolyzed using cellulase (Meicelase) and then the hydrolyzate was subjected to fermentation substrate. By enzymatic saccharification using Meicelase, the highest recovery of glucose from raw bagasse, 73.7?%, was obtained at a steam pressure of 20?atm. For extracted residue with water after steam explosion, the glucose recovery increased up to 94.9?% at a steam pressure of 20?atm. These results showed that washing with water is effective in removing enzymatic reaction inhibitors. After steam pretreatment (steam pressure of 20?atm), d-lactic acid was produced by Lactobacillus delbrueckii NBRC 3534 from the enzymatic hydrolyzate of steam-exploded bagasse and washed residue. The conversion rate of d-lactic acid obtained from the glucose concentration was 66.6?% for the hydrolyzate of steam-exploded bagasse without washing with water and 90.0?% for that derived from the extracted residue with water after steam explosion. These results also demonstrated that the hydrolyzate of steam-exploded bagasse (without washing with water) contains fermentation inhibitors and washing with water can remove them.     

Assessment of air pollution in Nagasaki City: determination of polycyclic aromatic hydrocarbons and their nitrated derivatives, and some metals

Air pollutants such as polycyclic aromatic hydrocarbons (PAHs), their nitrated derivatives (NPAHs), and some metals on airborne particles in Nagasaki city, Japan were determined over a period of 12 months by high-performance liquid chromatography with chemiluminescence, fluorescence and flameless atomic absorption spectrometry. The average concentrations (range) were 18.24 (4.07-41.54) ng/m3 for total PAHs, 0.91 (0.23-4.10) pg/m3 for NPAHs, 7.95 (1.71-16.31) ng/m3 for Pb, 11.56 (3.35-24.96) ng/m3 for Mn and 3.79 (0.97-14.71) ng/m3 for Ni (n = 136). The toxic equivalency factors adjusted concentration of total PAHs determined in Nagasaki city area was 2.33 ng/m3. Concentrations of total PAHs and NPAHs in winter were higher than those in summer. In a weekly variations study, total PAHs and NPAHs concentrations, as well as traffic volume showed a similar tendency with all values higher during weekdays and lower at the weekend. The correlation coefficients between total PAHs or NPAHs and traffic volume were 0.781 and 0.818, respectively. These results suggested that one of the main sources for NPAHs and PAHs in a city area might be motor vehicles.     

Identification of nonvolatile neutral organic compounds in tap water

Nonvolatile neutral organic compounds in tap water were examined by high-pressure liquid chromatography, infrared spectrometry, ¹H- and ¹³C-FT-NMR, gel permeation chromatography, elementary analysis, and field desorption mass spectrometry. Neutral organic compounds in 10 m³ of tap water were continuously extracted by the Amberlite XAD-2 resin column, and separated into four fractions by silica-gel column chromatography. Removal of volatile compounds in fraction 3 including polar oxygenated compounds was carried out with microdistillation column under high vacuum by using a diffusion pump. Nonvolatile organic compounds isolated from tap water were identified as poly(vinyl acetate) derivatives with molecular weights ranging from 300 to 1300.     

Rapid assays for environmental and biological monitoring

Abstract

Rapid, inexpensive, sensitive, and selective enzyme‐linked immunosorbent assays (ELISAs) now are utilized in environmental science. In this laboratory, many ELISAs have been developed for pesticides and other toxic substances and also for their metabolites. Compounds for which ELISAs have recently been devised include insecticides (organophosphates, carbaryl, pyrethroids, and fenoxycarb), herbicides (s‐triazines, arylureas, triclopyr, and bromacil), fungicides (myclobutanil), TCDD, and metabolites of naphthalene and toluene. New rapid assays have been developed for mercury.     

Viral Interference as a Factor of False-Negative in the Infectious Adenovirus Detection Using Integrated Cell Culture-PCR with a BGM Cell Line

Food and Environmental Virology - This study investigated the influence of viral interference on the detection of enteric viruses using the integrated cell culture (ICC)-PCR with a BGM cell line....     

Ecological impacts on the limpet Lottia gigantea populations: human pressure over a broad scale on island and mainland intertidal zones

Here long-term monitoring data taken at 33 sites in southern and central California coast and islands were used to evaluate the size structure of the large intertidal limpet, Lottia gigantea in restricted-access and in easily accessible intertidal zones that encompass a wide range of ecological variables. Using multi-dimensional analysis of population size structures, we found that sites on islands and strictly protected mainland sites have significantly larger median limpet sizes and a greater range of limpet sizes than unprotected mainland sites, while no pattern occurs in latitudinal or regional comparison of sites. Although intertidal predators such as oystercatchers were not the primary focus of the monitoring efforts, extensive natural history notes taken during sampling visits support the argument that predation was not a primary cause for the size structure differences. Finally, substratum differences were determined not to have biased the observation of larger limpets in protected sites. In regard to human interactions with limpets, we conclude that the degree of enforcement against poaching is the better predictor of limpet size structure than proximity to population centers or visitation to intertidal sites.     

The simulation of long-range transport of ¹³⁷Cs from East Asia to Japan in 2002 and 2006

To evaluate the quantities of ¹³⁷Cs from past nuclear tests being transported to and deposited in Japan by naturally-occurring phenomena, the authors developed long-range transport models for ¹³⁷Cs considering Asian dust. The simulation using these models backed the observed recent increase of ¹³⁷Cs deposition along the coast of the Sea of Japan in early spring. For the sake of public safety, it is vital to ascertain whether an increase of radioactive deposition is caused by natural phenomena or a nuclear accident. The observations in recent years have suggested that dust and soil containing ¹³⁷Cs is transported from the regions around Inner Mongolia to Japan by the wind. In this paper, using observation data from the early spring of 2002 and 2006, the authors have found good agreement between the simulations and the measurements. The simulations reproduced the entrainment of ¹³⁷Cs and subsequent transport to Japan caused by strong winds associated with low pressure areas around the Inner Mongolian grasslands. The most likely cause of high-level ¹³⁷Cs deposition over northern Japan during March 2002 was ¹³⁷Cs associated with particles transported at low-altitude (1 km) and subjected to precipitation on the 22nd to 24th.     

Age-Dependent Factors Affecting Thoracic Response: A Finite Element Study Focused on Japanese Elderly Occupants

Objectives: The ultimate goal of this research is to reduce thoracic injuries due to traffic crashes, especially in the elderly. The specific objective is to develop and validate a full-body finite element model under 2 distinct settings that account for factors relevant for thoracic fragility of elderly: one setting representative of an average size male and one representative of an average size Japanese elderly male.

Methods: A new thorax finite element model was developed from medical images of a 71-year-old average Japanese male elderly size (161cm, 60 kg) postmortem human subject (PMHS). The model was validated at component and assembled levels against original series of published test data obtained from the same elderly specimen. The model was completed with extremities and head of a model previously developed. The rib cage and the thoracic flesh materials were assigned age-dependent properties and the model geometry was scaled up to simulate a 50th percentile male. Thereafter, the model was validated against existing biomechanical data for younger and elderly subjects, including hub-to-thorax impacts and frontal impact sled PMHS test data. Finally, a parametric study was conducted with the new models to understand the effect of size and aging factors on thoracic response and risk of rib fractures.

Results: The model behaved in agreement with tabletop test experiments in intact, denuded, and eviscerated tissue conditions. In frontal impact sled conditions, the model showed good 3-dimensional head and spine kinematics, as well as rib cage multipoint deflections. When properties representative of an aging person were simulated, both the rib cage deformation and the predicted number of rib fractures increased. The effects of age factors such as rib cortical thickness, mechanical properties, and failure thresholds on the model responses were consistent with the literature. Aged and thereby softened flesh reduced load transfer between ribs; the coupling of the rib cage was reduced. Aged costal cartilage increased the severity of the diagonal belt loading sustained by the lower loaded rib cage.

Conclusions: When age-specific parameters were implemented in a finite element (FE) model of the thorax, the rib cage kinematics and thorax injury risk increased. When the effect of size was isolated, 2 factors, in addition to rib material properties, were found to be important: flesh and costal cartilage properties. These 2 were identified to affect rib cage deformation mechanisms and may potentially increase the risk of rib fractures.     

Heterogeneous Sulfate Formation on Dust Surface and Its Dependence on Mineralogy: Balloon-Borne Observations from Balloon-Borne Measurements in The Surface Atmosphere of Beijing, China

This study focuses on providing a direct insight into the process by which sulfate is formed on mineral dust surface in the actual atmosphere. Six sets of aerosol measurements were conducted in the outskirts of Beijing, China, in 2002–2003 using a tethered balloon. The mineralogy of individual dust particles, as well as its influence on the S (sulfur) loadings was investigated by SEM-EDX analysis of the directly collected particles. The mixed layer in the urban atmosphere was found to be quite low (500–600m), often appearing as a particle dense stagnant layer above the surface. It is suggested that mineral dust is a common and important fraction of the coarse particles in Beijing (35–68%), and that it is relatively enriched with Calcite (>28%). An exceptional amount of S was detected in the mineral particles, which can be explained neither by their original composition, nor by coagulation processes between the submicron sulfates and the dust. Heterogeneous uptake of gaseous SO₂, and its subsequent oxidation on dust was suggested as the main pathway that has actually taken place in the ambient environment. The mineral class found with the largest number of particles containing S was Calcite, followed by Dolomite, Clay, Amphibole etc., Feldspar, and Quartz. Among them, Calcite and Dolomite showed distinctly higher efficiency in collecting sulfate than the other types. A positive correlation was found with the number of S containing particles and the relative humidity. Calcite in particular, since almost all of its particles was found to contain S above 60% r.h. On the other hand, the active uptake of SO₂ by the carbonates was not suggested in the free troposphere downwind, and all the mineral classes exhibited similar S content. Relative humidity in the free troposphere was suggested as the key factor controlling the SO₂ uptake among the mineral types. In terms of sulfate loadings, the relationship was not linear, but rather increased exponentially as a function of relative humidity. The humidity-dependent uptake capacity of mineral types altogether showed an intermediate value of 0.07 gSO₄ ²⁻ g⁻¹ mineral at 30% r.h. and 0.40 gSO₄ ²⁻ g⁻¹ mineral at 80%, which is fairly consistent with laboratory experiments.