On-line speciation of arsenical compounds in fish and mussel extracts by HPLC-ICP-MS

The separation and determination of sub-μmol/l levels of six environmentally significant As compounds was accomplished by means of high performance liquid chromatography (HPLC) combined online with inductively coupled plasma mass spectrometry (ICP-MS). The species of interest (arsenite and arsenate, monomethylarsonic acid, dimethylarsinic acid, arsenobetaine and arsenocholine) were quantified in fish and mussel extracts after separation on a Dionex AS7 column equipped with an on-guard AG7 column using a bicarbonate buffer as the mobile phase in a gradient mode. The species thus eluted were directly forwarded to the ICP-MS detector. The detection power of the overall system allows each As form to be determined at concentrations as low a 0.0013–0.0027 μmol 1⁻¹.     

Critical review of the building downwash algorithms in AERMOD

The only documentation on the building downwash algorithm in AERMOD (American Meteorological Society/U.S. Environmental Protection Agency Regulatory Model), referred to as PRIME (Plume Rise Model Enhancements), is found in the 2000 A&WMA journal article by Schulman, Strimaitis and Scire. Recent field and wind tunnel studies have shown that AERMOD can overpredict concentrations by factors of 2 to 8 for certain building configurations. While a wind tunnel equivalent building dimension study (EBD) can be conducted to approximately correct the overprediction bias, past field and wind tunnel studies indicate that there are notable flaws in the PRIME building downwash theory. A detailed review of the theory supported by CFD (Computational Fluid Dynamics) and wind tunnel simulations of flow over simple rectangular buildings revealed the following serious theoretical flaws: enhanced turbulence in the building wake starting at the wrong longitudinal location; constant enhanced turbulence extending up to the wake height; constant initial enhanced turbulence in the building wake (does not vary with roughness or stability); discontinuities in the streamline calculations; and no method to account for streamlined or porous structures.

Implications: This paper documents theoretical and other problems in PRIME along with CFD simulations and wind tunnel observations that support these findings. Although AERMOD/PRIME may provide accurate and unbiased estimates (within a factor of 2) for some building configurations, a major review and update is needed so that accurate estimates can be obtained for other building configurations where significant overpredictions or underpredictions are common due to downwash effects. This will ensure that regulatory evaluations subject to dispersion modeling requirements can be based on an accurate model. Thus, it is imperative that the downwash theory in PRIME is corrected to improve model performance and ensure that the model better represents reality.     

Activated carbon produced from waste coffee grounds for an effective removal of bisphenol-A in aqueous medium

Environmental Science and Pollution Research - Bisphenol-A is widely used chemical in industry and unfortunately often detected in natural waters. Considered as an emerging pollutant, bisphenol-A...     

The recovery of ammonia and hydrogen sulfide from ground-level area sources using dynamic isolation flux chambers: bench-scale studies

Controlled bench-scale laboratory experiments were conducted to evaluate the recovery of ammonia (NH3) and hydrogen sulfide (H2S) from dynamic isolation flux chambers. H2S (80-4000 ppb) and NH3 (5000-40,000 ppb) samples were diffused through the flux chamber to simulate ground level area source emissions while measuring the inlet and outlet flux chamber concentrations simultaneously. Results showed that the recovery of H2S during a 30-min sampling time was almost complete for concentrations >2000 ppb. At the lowest concentration of 80 ppb, 92.55% of the H2S could be recovered during the given sampling period. NH3 emissions exhibited similar behavior between concentrations of 5000-40,000 ppb. Within the 30-min sampling period, 92.62% of the 5000-ppb NH3 sample could be recovered. Complete recovery was achieved for concentrations >40,000 ppb. Predictive equations were developed for gas adsorption. From these equations, the maximum difference between chamber inlet and outlet concentrations of NH3 or H2S was predicted to be 7.5% at the lowest concentration used for either gas. In the calculation of emission factors for NH3 and H2S, no adsorption correction factor is recommended for concentrations >37,500 ppb and 2100 ppb for NH3 and H2S, respectively. The reported differences in outlet and inlet concentration above these ranges are outside the fullscale sensitivity of the gas sensing equipment. The use of 46-90 m of Teflon tubing with the flux chambers has apparently no effect on gas adsorption, because recovery was completed almost instantaneously at the beginning of the tests.     

The use of Odonata species for environmental assessment: a meta-analysis for the Neotropical region

Environmental Science and Pollution Research - The order Odonata has been regularly used as an indicator of the ecosystem’s condition. The objective of this review was to analyze the...     

A regional-scale sustainable development index: the case of Baja California Sur,Mexico

Sustainable development, as a multi-dimensional concept, is difficult to measure. Some efforts using indicators and indices have appeared in recent years, but most were developed on a national scale. Use of sustainability indicators has proven valuable for attaining better management of the environment by minimizing information gaps and maximizing community capabilities in terms of economic, social, environmental, and institutional sustainability dimensions. However, at least in the case of developing countries, the potential exists that national sustainability measures, based on national level indicators, may mask problems in sub-national zones with highly unsustainable conditions. This paper proposes a methodology to evaluate sustainable development at a local level, the use of which could be helpful in comparing different regions within a country or even among different countries. National sustainability indicators should result from a combination (whether additive or proportional) of regional sustainability indicators, as developed in this paper.     

Chemical degradation of 2,3,7,8-TCDD by means of polyethyleneglycols in the presence of weak bases and an oxidant

A chemical method for destroying the 2,3,7,8-TCDD is reported; it provides gradual and progressive substitution of the chlorine atoms by hydrogen atoms. The dehalogenation is promoted by a mixture made up of polyethyleneglycols (high molecular weight) of a weak base (K₂ CO₃) and of an inorganic peroxide (Na₂ O₂) which begins the radical process. The organic chlorine is transformed into inorganic chloride.The reaction mixture administered to male guinea-pigs did not lead to any direct or histological effect.     

Global burned-land estimation in Latin America using MODIS composite data.

This paper presents results of the AQL2004 project, which has been develope within the GOFC-GOLD Latin American network of remote sensing and forest fires (RedLatif). The project intended to obtain monthly burned-land maps of the entire region, from Mexico to Patagonia, using MODIS (moderate-resolution imaging spectroradiometer) reflectance data. The project has been organized in three different phases: acquisition and preprocessing of satellite data; discrimination of burned pixels; and validation of results. In the first phase, input data consisting of 32-day composites of MODIS 500-m reflectance data generated by the Global Land Cover Facility (GLCF) of the University of Maryland (College Park, Maryland, U.S.A.) were collected and processed. The discrimination of burned areas was addressed in two steps: searching for "burned core" pixels using postfire spectral indices and multitemporal change detection and mapping of burned scars using contextual techniques. The validation phase was based on visual analysis of Landsat and CBERS (China-Brazil Earth Resources Satellite) images. Validation of the burned-land category showed an agreement ranging from 30% to 60%, depending on the ecosystem and vegetation species present. The total burned area for the entire year was estimated to be 153 215 km2. The most affected countries in relation to their territory were Cuba, Colombia, Bolivia, and Venezuela. Burned areas were found in most land covers; herbaceous vegetation (savannas and grasslands) presented the highest proportions of burned area, while perennial forest had the lowest proportions. The importance of croplands in the total burned area should be taken with reserve, since this cover presented the highest commission errors. The importance of generating systematic products of burned land areas for different ecological processes is emphasized.     

The fungal colonisation of rock-art caves: experimental evidence

The conservation of rock-art paintings in European caves is a matter of increasing interest. This derives from the bacterial colonisation of Altamira Cave, Spain and the recent fungal outbreak of Lascaux Cave, France—both included in the UNESCO World Heritage List. Here, we show direct evidence of a fungal colonisation of rock tablets in a testing system exposed in Altamira Cave. After 2 months, the tablets, previously sterilised, were heavily colonised by fungi and bacteria. Most fungi isolated were labelled as entomopathogens, while the bacteria were those regularly identified in the cave. Rock colonisation was probably promoted by the dissolved organic carbon supplied with the dripping and condensation waters and favoured by the displacement of aerosols towards the interior of the cave, which contributed to the dissemination of microorganisms. The role of arthropods in the dispersal of spores may also help in understanding fungal colonisation. This study evidences the fragility of rock-art caves and demonstrates that microorganisms can easily colonise bare rocks and materials introduced into the cavity.