Dioxin-like compounds in pine needles around Tokyo Bay, Japan in 1999

Pine needle samples collected at ten spatially distant sites around Tokyo Bay in 1999 indicated a widespread lower troposphere pollution with ultra-trace dioxin-like compounds such as chlorodibenzo-p-dioxins (PCDDs), -furans (PCDFs), non-ortho- and mono-ortho-chlorobiphenyls (pPCBs), and -naphthalenes (PCNs). Elevated concentration of planar PCBs and the total PCNs were found at the sites which are located innermost to the Bay, suggesting the regional importance of the evaporative nature of the source of pollution by those compounds over this vast area. The concentrations and profiles for PCDDs and PCDFs remained largely uniform. An exception was the site near the town of Tateyama in the Chiba Prefecture, which is the southernmost but also relatively separate from the inner Bay. The site near Tateyama showed somehow background contamination with all compound groups and highly different profiles of PCNs. The principal component analysis (PCA) of the data matrix has revealed that around the Tokyo Bay, apart from the evaporative emission sources for PCNs and PCBs, combustion related processes also play an important role as sources of the ambient air contamination not only with PCDDs/Fs but also with chloronaphthalenes and planar chlorobiphenyls.     

Modelling of Materials Policies

This paper discusses the REAP1 model and its application for the analysis of CO₂ reduction and waste management policies for Japanese petrochemicals. The pros and cons of this modelling approach in comparison to other tools is elaborated. This is followed by a discussion of the model code and the modelling results. The results show that CO₂ policies can have significant impacts on waste flows and waste policies can have significant CO₂ benefits. As a consequence both effects must be considered in policy assessment. Pricing instruments are recommended instead of regulations because of the complex physical relations in the materials life cycle that extend beyond sector boundaries. A taxation approach is superior to a subsidy approach because rebound effects can be avoided.     

Current status and research on E-waste issues in Asia

Rapid economic growth in Asia and the increasing transboundary movement of secondary resources will increasingly require both 3R endeavors (reduce, reuse, recycle) in each country and appropriate control of international material cycles. Recently, managing electrical and electronic waste (E-waste) has become an important target for domestic and international material cycles from the viewpoints of environmental preservation and resource utilization efficiency. To understand the current status of E-waste issues in the context of international material cycles and to discuss the future tasks related to achieving 3R in the region, we organized the National Institute for Environmental Studies (NIES) E-waste Workshop in December 2004. This article reviews past studies on E-waste and briefly describes the topics presented and discussions held at the workshop. The topics at the workshop included E-waste generation, recycling systems, international trade, and environmental impacts. In addition, we discussed various issues such as terminology, current environmental concerns, and possible solutions. Transboundary shipments of E-waste should be conducted taking into consideration the concept of sustainable development. The direction of future research and possible collaborations are also discussed.     

α1-Microglobulin levels and correlation with cadmium and other metals in urine of non-smoking women among general populations in Japan

The present study was initiated to examine urinary α₁-microglobulin (α₁-MG-U) levels among non-smoking women in the general population in Japan. A previously established database on spot urine samples from adult woman volunteers in 10 non-polluted areas all over Japan was re-examined. The data examined were on α₁-MG-U, cadmium, calcium, magnesium and zinc levels in urine (Cd-U, Ca-U, Mg-U and Zn-U, respectively), urinary creatinine (CR or cr), urine specific gravity (SG or sg), smoking habits and age. Thus, 8975 never-smoking women were selected for statistical analyses. The grand geometric mean (GM) for α₁-MG-U among the population was 2.1?mg/L or 2.5?mg/g?cr, depending on the correction for urine density. It was 1.1?µg/L or 1.3?µg/g?cr for GM Cd-U. The inter-area difference in α₁-MG-U was <1.5?mg/g?cr or <0.7?mg/L; the area with the highest or lowest GM Cd-U was not always highest or lowest in GM α₁-MG-U. The correlation coefficient (0.53) between log?Cd-U and log?α₁-MG-U (both without urine density correction) became substantially smaller when the analyte levels were corrected for CR (0.25) or SG (0.26). In multiple regression analysis, the power of influence of the five independent variables (log?Cd-U, Ca-U, Mg-U, Zn-U and age) in combination was small (R ²?≦?0.13). In contrast, logistic regression analysis suggested that α₁-MG-U might be elevated as a function of an increase in Cd-U, depending on the cut-off values. Discussion was made on dose (Cd-U_cr) and response (α₁-MG-U_cr) relationship based on information available in literatures to show that the increment in α₁-MG-U_cr per Cd-U_cr was much greater when Cd-U_cr was large, e.g., in excess of 10?µg/g?cr.     

Material cycles in Asia: especially the recycling loop between Japan and China

In this article, we clarify the current status of Japanese exports and Chinese imports of secondary resources. A total of around 10 million metric tons (t) of secondary resources are exported annually from Japan to China, Hong Kong, and Korea. Hong Kong plays the role of a transshipment point, especially regarding the trade in plastic waste, and China imports much from the USA and Japan, often through Hong Kong. The secondary resources exported from Japan include both byproducts from manufacturing processes and end-of-life products or materials. The great demand in China, and the difference in prices between countries, drive this transboundary shipment, although Japan has enacted various recycling laws that were implicitly intended to promote domestic recycling. In China, the imported secondary resources are recycled, usually by means of primitive and low-cost hand labor. The greatest concern is whether there are still improper (illegal or polluting) recycling activities in China. International material cycles should prevent environmental pollution and ensure efficient resource utilization. To that end, the following measures are needed: cooperative control of the trade of secondary resources between countries, the alignment of domestic laws with the regulations in other countries based on the actual trade activities, and the realization of sound practices for global resources management.     

Material flow indicators to measure progress toward a sound material-cycle society

This article reviews recent progress in material flow analysis and its use in providing resource productivity indicators and is based on developments in Japanese policy toward a sound material-cycle society and in international forums such as within the Organisation for Economic Development and Cooperation, covering both institutional and methodological issues. Indicators derived from economy-wide material flow accounts such as direct material inputs are useful to demonstrate the absolute size of a physical economy and to reinforce the need to both reduce consumption of natural resources and limit waste generation. Interpretation of material flows as resources and potential environmental impacts is discussed, and linkages between the size of material flows and specific environmental impacts and damage must be further elaborated for use in environmental policy. Lessons learned from the practical use of resource productivity indicators are also discussed. Additional indicators are needed that can be used to evaluate the performance of microeconomic contributors. The need for an integrated approach that links upstream resource issues and downstream waste issues through the 3Rs concept or the circular economy/society concept is attracting increasing attention. Consequently, the accumulation of reliable scientific knowledge and data in this field in a fully international context is essential.     

Why do municipalities accept disaster waste? Evidence from the great east Japan earthquake

Environmental Economics and Policy Studies - Municipalities’ cooperation is critical for successful policy interventions for disaster recovery. Using a spatial econometric model, we...     

Isomer-specific analysis of chlorinated biphenyls,naphthalenes and dibenzofurans in Delor: polychlorinated biphenyl preparations from the former Czechoslovakia

Technical polychlorinated byphenyl (PCB) preparations--Delors 103, 104, 105, and 106--produced in the former Czechoslovakia were analyzed for their chlorobiphenyl (CB), chloronaphthalene (PCN) and chlorinated dibenzofuran (PCDF) composition and content using high resolution gas chromatography-mass spectrometry techniques. The congener patterns of Delors 103, 104, 105, and 106 resembled Aroclors 1242, 1248, 1254, and 1260. Delors contained PCNs and PCDFs, as impurities, at microgram per gram concentrations. Concentrations of PCNs and PCDFs in Delors were greater than those found in the corresponding Aroclors. The potential for the emissions of PCNs and PCDFs from Delor was estimated to be 3680 and 860 kg, respectively. Non- and mono-ortho PCBs were the major contributors to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) equivalents in Delor mixtures.     

Framework for estimating potential wastes and secondary resources accumulated within an economy – A case study of construction minerals in Japan

Material stocks in economic society are considered to represent a reserve for wastes and secondary resources. From the viewpoints of proper disposal and reutilization of stocked materials, accurate estimation of the amount of materials that will emerge as wastes or secondary resources in the future is important. We defined materials that have a high probability of emerging as wastes or secondary resources as “potential wastes and secondary resources” and estimated that amount for construction minerals in Japan as a case study. The following conclusions were drawn. (1) We classified materials that are input into economic society into four categories: potential wastes and secondary resources, potential dissipated materials, dissipatively used materials, and permanent structures. By clarifying the latter three non-potential wastes and secondary resources, we performed a more accurate assessment of the wastes and secondary resources that will emerge in the future. (2) The share of potential wastes and secondary resources was estimated to be about 30% of all construction minerals that have been input into and accumulated in Japanese economic society. (3) Information related to potential dissipated materials and dissipatively used materials will provide fundamental knowledge to support analyses of the environmental impacts and resource losses which these materials might generate.