Comprehensive utilization of residues of Magnolia officinalis based on fiber characteristics

Journal of Material Cycles and Waste Management - The traditional Chinese medicinal plant Magnolia officinalis has a wide range of applications; including more than 200 kinds of patented Chinese...     

Design and validation of a practical index for trauma assessment

In the past 20 years a variety of indices have been suggested for measuring the severity of trauma, however none of them meets the requirement of being a simple and objective instrument that can be utilized efficiently by lay persons and providers of health services without previous experience in triaging. A new system has been proposed which meets this requirement and which has been validated with 197 injured persons at the emergency ward of the Valle University Hospital in Call, Colombia. The instrument showed a high level of concordance with the conventional triaging method and classifies victims into four categories: critical with recovery unlikely, critical but recoverable, moderately serious, and ambulatory. There is discussion on the reliability of this instrument and it is recommended that it be validated with victims from larger disasters. Regardless, it has the advantage of being specific and free of the subjectivity that characterizes other indices.     

Speciation of arsenic using solid phase extraction cartridges

Various solid phase extraction (SPE) cartridges were investigated for speciation of arsenite [As(III)], arsenate [As(v)], monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA). Cartridges containing different types of sorbent materials were tested for arsenic retention and elution characteristics. Alumina cartridges were found to completely retain all the four target arsenic species, and are suitable for removal and preconcentration purposes. For speciation analysis, different arsenic species were separated on the basis of their selective retention on and elution from specific cartridges. DMA was retained on a resin-based strong cation exchange cartridge and eluted with 1.0 M HCl. MMA and As(v) were both retained on a silica-based strong anion exchange cartridge and sequentially eluted with 60 mM acetic acid (for MMA) and 1.0 M HCl [for As(v)]. As(III) was not retained on either cartridge and remained in solution. Arsenic species in solution and those eluted from the cartridges were subsequently quantified by using flow injection with hydride generation atomic fluorescence spectrometry (FI-HGAFS) and hydride generation atomic absorption spectrometry (FI-HGAAS). A detection limit of 0.05 microg L(-1) arsenic in water sample was achieved using HGAFS. An application of the method was demonstrated at a drinking water treatment facility. As(III) and As(v) species were determined in water at various stages of treatment. The method is suitable for routine determination of trace levels of arsenic in drinking water to comply with more stringent environmental regulations.     

Measurements of fractionated gaseous mercury concentrations over northwestern and central Europe, 1995-99

Although it makes up only a few per cent. of total gaseous mercury (TGM) in the atmosphere, the fraction of oxidised (divalent) mercury plays a major role in the biogeochemical cycle of mercury due to its high affinity for water and surfaces. Quantitative knowledge of this fraction present in mixing ratios in the parts-per-10(15) (ppq) range is currently very scarce. This work is based on approximately 220 data for divalent gaseous mercury (DGM) collected during 1995-99 in ambient air. Over the course of the measurements, the sampling and analytical methods were modified and improved. This is described here in detail and includes transition from wet leaching and reduction procedures to thermo-reductive desorption, the use of annular as well as tubular denuders and adoption of an automated sampling system. The concentration of DGM exhibited a strong seasonal behaviour in contrast to atomic gaseous mercury, with low values in winter and maximum values in summer. The DGM/TGM ratios were frequently found to be below the detection limit (< or = 1%) and in the range 1-5%. A trend of diurnal DGM patterns was observed and implies photolytically induced sources. Scavenging of DGM during rain events was also noticed.     

A novel technology for quick acclimation of an anaerobic microbial consortia used for biodegrading teraphthalic acid (TA)

ＩｎｔｒｏｄｕｃｔｉｏｎＴｅｒａｐｈｔｈａｌｉｃａｃｉｄ (ＴＡ)ｉｓｏｎｅｏｆｔｈｅｐｅｔｒｏｃｈｅｍｉｃａｌｓｗｉｄｅｌｙｕｓｅｄｉｎｔｈｅｓｙｎｔｈｅｓｉｓｏｆｐｏｌｙｅｓｔｅｒｆｉｂｅｒ,ｖｉｄｅｏｆｉｌｍｓａｎｄｏｔｈｅｒａｐｐｌｉｃａｔｉｏｎｓ .Ｓｉｎｃｅｂｉｓ (2 ｅｔｈｙｌｈｅｘｙｌ)ｐｈｔｈａｌａｔｅ ,ｄｉｅｔｈｙｌｐｈｔｈａｌａｔｅａｎｄｄｉｍｅｔｈｙｌｐｈｔｈａｌａｔｅｈａｖｅｂｅｅｎｃｌａｓｓｉｆｉｅｄａｓｐｒｉｏｒｉｔｙｈａｚａｒｄｏｕｓｃｏｍｐｏｕｎｄｓｂｙＥＰＡｏｆｔｈｅ…     

目前环境污染治理存在的问题及对策

本文论述了目前环境污染治理技术及其在应用中存在的问题。由于环境污染治理技术本身的局限性以及人们观念等原因 ,目前的环境污染治理存在一定的局限性 ,如何认识并克服它成为一个不容忽视的问题 ;并提出有实施污染治理过程中 ,必须用持续发展的理论进行指导 ,将污染物的污染防治战略转变为污染防止战略即“清洁生产”战略     

陆架浅海沉积物-海水界面溶质通量的计算方法及其应用

陆架浅海沉积物—海水界面上的溶解态生源物质通量的准确估算是海洋生态系统动力学研究中的关键性问题之一。由于底栖生物活动以及海流、海浪及潮波与海底地形地物相互作用的影响 ,使得该通量的准确估算十分困难。本文综合分析讨论了近年来提出的各种计算该类通量的物理模型及参数的确定方法 ,并结合在中国黄、东海等陆架浅海水层—底栖生态动力学耦合模型研究的需要 ,比较深入地讨论了应用过程中应该考虑的几个问题     

基于人工神经网络的行业无害化生产能力评价模型研究

利用BP前向人工神经网络方法 ,建立了一种全新的基于人工神经网络的行业无害化生产能力评价模型 ,该模型采用动量梯度下降反向传播和学习速率自适应调整相结合的训练学习算法。最后 ,以造纸及纸制品业为例 ,对中国各省市造纸行业的无害化生产能力进行评价 ;并进一步分析中国各省造纸行业无害化生产能力的时空分布规律 ,为我国行业规划、布局决策提供科学依据。     

非线性灰色模型在污染物总量预测中的应用

在前人工作的基础之上介绍了几种修正的ＧＭ（１，１）非线性模型，并以衡阳市１９９０～１９９６年城区污染物总量（ＣＯＤ）的预测为例，探讨了各种模型的应用效果。结果表明：非线性模型的拟合精度更高，具有更加广阔的发展前景。     

云南省主要风景区生态环境现状研究

对云南省主要风景区所在４４个县，市的生态环境质量评价表明，优，良，中的县、市占总数的８８．６４％，总体良好。４４个县中有２７个，１０个国家的风景区中有６个均在两个旅游资源区内， 局相对合理。但１０个湖泊中已 有７个水质达不到水质的功能标准，相关的１４个城镇中也９个的空气质量达不到三级标准。