PCBs,PBDEs and dioxin-related compounds in floor dust from an informal end-of-life vehicle recycling site in northern Vietnam: contamination levels and implications for human exposure

Floor dusts from Vietnamese end-of-life vehicle (ELV)-processing households were investigated to elucidate the contamination levels and exposure risk of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and dioxin-related compounds (DRCs). The concentrations were in order of PBDEs (260–11,000, median 280 ng/g overall) > PCBs (19–2200, median 140 ng/g) > dioxin-like PCBs (8.8–450, median 22 ng/g) ? polybrominated dibenzo-p-dioxin/dibenzofurans (PBDD/Fs, 2000–28,000, median 8500 pg/g) > polychlorinated dibenzo-p-dioxin/dibenzofurans (PCDD/Fs, 440–4100, median 1800 pg/g) > MoBPCDD/Fs (1.9–1200, median 250 pg/g). Concentrations of PCBs and DRCs were higher than those reported for Vietnamese urban houses, indicating ELV processing as a significant source of these contaminants. Higher concentrations of PCBs relative to PBDEs suggest the abundance of old electrical capacitors/transformers in ELVs. The PBDD/F and PCDD/F profiles were indicative of DecaBDE-containing materials and combustion sources, respectively. PBDFs, PCDFs and DL-PCBs were the most important dioxin-like toxic equivalent (TEQ) contributors. The estimated PCB and TEQ intake doses from dust ingestion approached or exceeded the reference doses for children living in some ELV-processing households, indicating potential health risk. More comprehensive risk assessment of the exposure to PCBs and DRCs is required for residents of informal ELV recycling sites.     

Transition of human and livestock waste management in rural Hanoi: a material flow analysis of nitrogen and phosphorus during 1980–2010

Journal of Material Cycles and Waste Management - Human and livestock waste, i.e., excreta, were intensively used in crop cultivation in Asia over the years. However, rapid economic growth induced...     

Informal Emptying Business in Mandalay: Its Reasons and Financial Impacts

Environmental Management - Globally, 2.8 billion people use on-site sanitation facilities, which need regular emptying of accumulated fecal sludge. Illegal dumping from informal emptying...     

Behavior of flames propagating through lycopodium dust clouds in a vertical duct

The structure of flame propagating through lycopodium dust clouds has been investigated experimentally. Upward propagating laminar flames in a vertical duct of 1800 mm height and 150×150 mm square cross-section are observed, and the leading flame front is also visualized using by a high-speed video camera. Although the dust concentration decreases slightly along the height of duct, the leading flame edge propagates upwards at a constant velocity. The maximum upward propagating velocity is 0.50 m/s at a dust concentration of 170 g/m³. Behind the upward propagating flame, some downward propagating flames are also observed. Despite the employment of nearly equal sized particles and its good dispersability and flowability, the reaction zone in lycopodium particles cloud shows the double flame structure in which isolated individual burning particles (0.5–1.0 mm in diameter) and the ball-shaped flames (2–4 mm in diameter; the combustion time of 4–6 ms) surrounding several particles are included. The ball-shaped flame appears as a faint flame in which several luminous spots are distributed, and then it turns into a luminous flame before disappearance. In order to distinguish these ball-shaped flames from others with some exceptions for merged flames, they are defined as independent flames in this study. The flame thickness in a lycopodium dust flame is observed to be 20 mm, about several orders of magnitude higher than that of a premixed gaseous flame. From the microscopic visualization, it was found that the flame front propagating through lycopodium particles is discontinuous and not smooth.     

Shedding light on a neglected area: a new approach to knowledge creation

Awareness is needed of sustainability issues that are currently neglected but potentially important. A computer-based approach can highlight unconscious and neglected areas because it can structure vast amounts of knowledge. In this article, we propose a methodology to perceive unconscious areas of sustainability with the support of a computer-based approach, which creates a matrix, named the recognized-unrecognized matrix, which highlights both local and globally neglected problems. A case study is conducted to consider the potential contribution of the aviation industry to sustainability issues. We demonstrate that a citation network analysis is an effective methodology to chart the recognized-unrecognized matrix. We highlight issues of water use in the aviation industry by designing an innovative water and air circulation system, which significantly reduces water and fuel consumption on board airplane flights. We also suggest a new approach to integrating both explicit and tacit knowledge to enable knowledge creation.     

Gamma-dose rates from terrestrial and Chernobyl radionuclides inside and outside settlements in the Bryansk Region, Russia in 1996-2003

In order to estimate current external gamma doses to the population of the Russian territories contaminated as a result of the Chernobyl accident, absorbed gamma-dose rates in air (DR) were determined at typical urban and suburban locations. The study was performed in the western districts of the Bryansk Region within the areas of 30 settlements (28 villages and 2 towns) with the initial levels of 137Cs deposition ranging from 13 to 4340 kBqm(-2). In the towns, the living areas considered were private one-story wooden and stone houses. DR values were derived from in situ measurements performed with the help of gamma-dosimeters and gamma-spectrometers as well as from the results of soil samples analysis. In the areas under study, the values of DR from terrestrial radionuclides were 25+/-6, 24+/-5, 50+/-10, 32+/-6, 54+/-11, 24+/-8, 20+/-6, 25+/-8, and 18+/-5 nGyh(-1) at locations of kitchen gardens, dirt surfaces, asphalt surfaces, wooden houses, stone houses, grasslands inside settlement, grasslands outside settlement, ploughed fields, and forests, respectively. In 1996-2001, mean normalized (per MBqm(-2) of 137Cs current inventory in soil) values of DR from (137)Cs were 0.41+/-0.07, 0.26+/-0.13, 0.15+/-0.07, 0.10+/-0.05, 0.05+/-0.04, 0.48+/-0.12, 1.04+/-0.22, 0.37+/-0.07, and 1.15+/-0.19 microGyh(-1) at the locations of kitchen gardens, dirt surfaces, asphalt surfaces, wooden houses, stone houses, grasslands inside settlement, grasslands outside settlement, ploughed fields, and forests, respectively. The radiometric data from this work and the values of occupancy factors determined for the Russian population by others were used for the assessments of annual effective doses to three selected groups of rural population. The normalized (per MBqm(-2) 137Cs current ground deposition) external effective doses to adults from 137Cs ranged from 0.66 to 2.27 mSvy(-1) in the years 1996-2001, in accordance with professional activities and structures of living areas. For the areas under study, the average external effective doses from 137Cs were estimated to be in the range of 0.39-1.34 mSvy(-1) in 2001. The average external effective doses from natural radionuclides appeared to be lower than those from the Chernobyl fallout ranging from 0.15 to 0.27 mSvy(-1).     

Dose estimation and radon action level problems due to nanosize radon progeny aerosols in underground manganese ore mine

One of the essential parameters influencing of the dose conversion factor is the ratio of unattached short-lived radon progeny. This may differ from the value identified for indoor conditions when considering special workplaces such as mines. Inevitably, application of the dose conversion factors used in surface workplaces considerably reduces the reliability of dose estimation in the case of mines.This paper surveyed the concentration of radon and its short-lived radon progeny and identified the unattached fraction of short-lived radon progeny. As well equilibrium factor during the month of August was calculated simultaneously at two extraction faces in a manganese ore mine.During working hours the average radon concentrations were 220 Bq m⁻³ and 530 Bq m⁻³ at Faces 1 and 2; the average short-lived progeny concentration was 90 Bq m⁻³ and 190 Bq m⁻³, the average equilibrium factors were 0.46 and 0.36, and the average unattached fractions were 0.21 and 0.17, respectively. The calculated dose conversion factor was between 9 and 27 mSv WLM⁻¹, but higher values could also be possible.     

氢气爆炸特性研究

本文研究、总结了氢气与空气(氢气与氧气)的混合物的爆炸特性.即氢气在空气中,在比较低燃烧界限的情况下,只有向上的传播和非常少的超压可以观测得到.正因为氢气的这种特性,将氢应用于科技将极大地推进社会进步,氢燃料将成为一种主要的能源.然而,氢技术应用的成功与否主要取决于氢使用的安全性.所以,必须掌握实际使用时氢气燃烧的性能.本文在日本过去十年实验数据的基础上,通过实验研究了氢气与空气混合物的燃点.研究了氢气、氧气混合物经氮气稀释后,按化学当量比例将不同浓度的氢气与空气进行混合,并得出了低温下的爆炸压力特性.随后,分别讨论了在初始压力下一致的情况下,试管直径相同的状况下,氢气与空气混合浓度相同的情况下,这三种爆轰传播限制之间的关系.得出了在空气中直接点燃的发生爆轰的最小试管直径,最小的装药量之间的关系,进行了爆轰危险性分级.最后,文章概括比较了氢与其他燃料的燃烧特性,评估了氢气燃烧过程中的危险与安全因素.     

Decomposing deflagration properties of acetylene under low temperatures

In this study, the decomposing deflagration properties of acetylene under temperatures down to −60 °C and pressures up to 0.2 MPa in a 1-L cylindrical closed vessel were experimentally investigated. The gases were ignited by an electric spark at the center of the vessel. The lower-limit pressures of decomposing deflagration by electric spark ignition were determined. The lower-limit pressure at 10 °C was 0.15 MPa, and it gradually increased with decreasing temperature. The lower-limit pressure at −60^oC was 0.18 MPa. The flame propagation properties, such as the pressure, were measured with pressure transducers mounted along the vessel. The maximum decomposing deflagration pressures and pressure rising rates also increased with decreasing temperature.     

Inactivation effect of pressurized carbon dioxide on bacteriophage Qβ and ΦX174 as a novel disinfectant for water treatment

The inactivation effects of pressurized CO2 against bacteriophage Qβ and ΦX174 were investigated under the pressure of 0.3–0.9 MPa, initial concentration of 107–109PFU/mL, and temperature of17.8°C–27.2°C. The optimum conditions were found to be 0.7 MPa and an exposure time of 25 min. Under identical treatment conditions, a greater than 3.3-log reduction in bacteriophage Qβ was achieved by CO2, while a nearly 3.0 log reduction was observed for phage ΦX174. The viricidal effects of N2O(an inactivation gas with similar characteristics to CO2), normal acid(HCl), and CO2 treatment with phosphate buffered saline affirmed the chemical nature of CO2 treatment. The pumping cycle, depressurization rate, and release of intracellular substances caused by CO2 were its viricidal mechanisms. The results indicate that CO2 has the potential for use as a disinfectant without forming disinfection by-products.