Critical review of the building downwash algorithms in AERMOD

The only documentation on the building downwash algorithm in AERMOD (American Meteorological Society/U.S. Environmental Protection Agency Regulatory Model), referred to as PRIME (Plume Rise Model Enhancements), is found in the 2000 A&WMA journal article by Schulman, Strimaitis and Scire. Recent field and wind tunnel studies have shown that AERMOD can overpredict concentrations by factors of 2 to 8 for certain building configurations. While a wind tunnel equivalent building dimension study (EBD) can be conducted to approximately correct the overprediction bias, past field and wind tunnel studies indicate that there are notable flaws in the PRIME building downwash theory. A detailed review of the theory supported by CFD (Computational Fluid Dynamics) and wind tunnel simulations of flow over simple rectangular buildings revealed the following serious theoretical flaws: enhanced turbulence in the building wake starting at the wrong longitudinal location; constant enhanced turbulence extending up to the wake height; constant initial enhanced turbulence in the building wake (does not vary with roughness or stability); discontinuities in the streamline calculations; and no method to account for streamlined or porous structures.

Implications: This paper documents theoretical and other problems in PRIME along with CFD simulations and wind tunnel observations that support these findings. Although AERMOD/PRIME may provide accurate and unbiased estimates (within a factor of 2) for some building configurations, a major review and update is needed so that accurate estimates can be obtained for other building configurations where significant overpredictions or underpredictions are common due to downwash effects. This will ensure that regulatory evaluations subject to dispersion modeling requirements can be based on an accurate model. Thus, it is imperative that the downwash theory in PRIME is corrected to improve model performance and ensure that the model better represents reality.     

Evaluation of techniques used in the preparation of diesel extract samples for mutagenicity studies

Diesel exhaust particles were used to compare methods and techniques used in the preparation of particulate matter for microbial mutagenesis testing. Investigated in this study were extraction, concentration, and solvent exchange methodologies as they affected recovery of mutagenic material from diesel samples using a Salmonella typhimurium plate incorporation assay. Solvent removal methods applicable for use in determining the mass concentration of extracts were also evaluated. Results indicated that particle samples Soxhlet extracted with dichloromethane yielded higher levels of mutagenic activity than did comparative samples utilizing sonication. No difference was seen between rotary evaporation or Kuderna-Danish macro concentration of extracts to volumes > 50 mL. In comparison of micro concentration techniques to volumes < 10 mL, vortex evaporation was found to be more efficient than a modified micro Kuderna-Danish method in recovery of mass and mutagenicity. Solvent exchanged samples were found to yield higher recoveries of mutagenic activity than samples taken to dryness and then reconstituted in the bioassay solvent. A dry mass weighing procedure utilizing desiccation was found to be more acceptable than either the use of an infrared heat lamp or nitrogen blowdown for solvent removal.     

Ammonia emissions from swine houses in the southeastern United States

Ammonia (NH3) from confined animal feeding operations is emitted from several sources including lagoons, field applications, and houses. This paper presents studies that were conducted to evaluate NH3 emissions from swine finisher and sow animal houses in the southeastern USA. Management and climate variables including animal weight, feed consumption, housing gutter water temperature, total time fans operated per day, house air temperature, house ambient NH3 concentration, and animal numbers were measured to determine their individual and combined effect on NH3 emissions. Ammonia emissions varied on daily and seasonal bases with higher emissions during warmer periods. For finishers, the summertime housing emissions on a per-animal basis were 2.4 times higher than wintertime (7.0 vs. 3.3 g NH3 animal(-1) d(-1)) or 3.2 times higher when compared on an animal unit (AU) basis (1 AU = 500 kg) because of climate and animal size differences between measurement periods. For summertime, the emission factor for the finishing pigs was 7.8 times higher than for sows on an animal basis and 25.6 times higher on an AU basis. Simple models were developed for housing emissions based on (i) all measured factors that were independent of each other and (ii) on three commonly measured management factors. The two models explained 97 and 64%, respectively, of variations in emissions. Ammonia emissions were found to be somewhat less than other studies on the same type housing due to more representative housing concentration measurements and calibration of exhaust fans; thus, emission factors for these type houses will be less than previously thought.     

Coastal spreading of olivine to control atmospheric CO2 concentrations: A critical analysis of viability

Qualitative proposals to control atmospheric CO₂ concentrations by spreading crushed olivine rock along the Earth's coastlines, thereby accelerating weathering reactions, are presently attracting considerable attention. This paper provides a critical evaluation of the concept, demonstrating quantitatively whether or not it can contribute significantly to CO₂ sequestration. The feasibility of the concept depends on the rate of olivine dissolution, the sequestration capacity of the dominant reaction, and its CO₂ footprint. Kinetics calculations show that offsetting 30% of worldwide 1990 CO₂ emissions by beach weathering means distributing of 5.0 Gt of olivine per year. For mean seawater temperatures of 15–25 °C, olivine sand (300 μm grain size) takes 700–2100 years to reach the necessary steady state sequestration rate and is therefore of little practical value. To obtain useful, steady state CO₂ uptake rates within 15–20 years requires grain sizes <10 μm. However, the preparation and movement of the required material poses major economic, infrastructural and public health questions. We conclude that coastal spreading of olivine is not a viable method of CO₂ sequestration on the scale needed. The method certainly cannot replace CCS technologies as a means of controlling atmospheric CO₂ concentrations.     

Evaluating the respiratory bioaccessibility of nickel in soil through the use of a simulated lung fluid

Simulated lung fluids are solutions designed to mimic the composition of human interstitial lung fluid as closely as possible. Analysis of mineral dusts using such solutions has been used to evaluate the respiratory bioaccessibility of various elements for which solubility in the lungs is a primary determinant of reactivity. The objective of this study was to employ simulated lung fluid analysis to investigate the respiratory bioaccessibility of nickel in soils. Current occupational guidelines in Australia regulate nickel compounds in terms of water solubility, though this may not be an accurate estimation of the total nickel that will dissociate in the lungs. Surface soils were collected from the city of Kalgoorlie in Western Australia, the site of an operational nickel smelter and metal mining activities. The fraction of the samples less than 10 μm was extracted from the soil, and it was this sub-10-μm fraction that was found to hold most of the total nickel present in the soil. The fine fraction was analyzed using a simulated lung fluid (modified Gamble’s solution) to isolate the nickel phases soluble in the lungs. In addition, a sequential extraction was employed to compare the bioaccessible fraction to those dissolved from different binding forms in the soil. In all samples, the simulated lung fluid extracted more nickel than the two weakest leaches of the sequential extraction combined, providing a more representative nickel bioaccessibility value than the current water leach method.     

Evaluation of airborne particulate matter and metals data in personal,indoor and outdoor environments using ED-XRF and ICP-MS and co-located duplicate samples

Factors and sources affecting measurement uncertainty associated with monitoring metals in airborne particulate matter (PM) were investigated as part of the Windsor, Ontario Exposure Assessment Study (WOEAS). The assessment was made using co-located duplicate samples and a comparison of two analytical approaches: ED-XRF and ICP-MS. Sampling variability was estimated using relative percent difference (RPD) of co-located duplicate samples. The comparison of ICP-MS and ED-XRF results yields very good correlations (R² ≥ 0.7) for elements present at concentrations that pass both ICP-MS and ED-XRF detection limits (e.g. Fe, Mn, Zn, Pb and Cu). PM concentration ranges (median, sample number) of 24-h indoor PM₁₀ and personal PM₁₀ filters, and outdoor PM_2.5 filters were determined to be 2.2–40.7 (11.0, n = 48) μg m^?3, 8.0–48.3 (11.9, n = 48) μg m^?3, and 17.1–42.3 (21.6, n = 18) μg m^?3, respectively. The gravimetric analytical results reveal that the variations in PM mass measurements for same-day sampling are insignificant compared to temporal or spatial variations: 92%, 100% and 96% of indoor, outdoor and personal duplicate samples, respectively, pass the quality criteria (RPD ≤ 20%). Uncertainties associated with ED-XRF elemental measurements of S, Ca, Mn, Fe and Zn for 24-h filter samples are low: 78%–100% of the duplicate samples passed the quality criteria. In the case of 24-h filter samples using ICP-MS, more elements passed the quality criteria due to the lower detection limits. These were: Li, Na, K, Ca, Si, Al, V, Fe, Mn, Co, Cu, Mo, Ag, Zn, Pb, As, Mg, Sb, Sn, Sr, Th, Ti, Tl, and U. Low air concentrations of metals (near or below instrumental detection limits) and/or inadvertent introduction of metal contamination are the main causes for excluding elements based on the pass/fail criteria. Uncertainty associated with elemental measurements must be assessed on an element-by-element basis.     

Nitrogen cycling through swine production systems: ammonia, dinitrogen, and nitrous oxide emissions

Ammonia (NH(3)) emissions from animal systems have become a primary concern for all of livestock production. The purpose of this research was to establish the relationship of nitrogen (N) emissions to specific components of swine production systems and to determine accurate NH(3) emission factors appropriate for the regional climate, geography, and production systems. Micrometeorological instrumentation and gas sensors were placed over two lagoons in North Carolina during 1997-1999 to obtain information for determining ammonia emissions over extended periods and without interfering with the surrounding climate. Ammonia emissions varied diurnally and seasonally and were related to lagoon ammonium concentration, acidity, temperature, and wind turbulence. Conversion of significant quantities of ammonium NH(4)(+) to dinitrogen gas (N(2)) were measured in all lagoons with the emission rate largely dependent on NH(4)(+) concentration. Lagoon NH(4)(+) conversion to N(2) accounted for the largest loss component of the N entering the farm (43% as N(2)); however, small amounts of N(2)O were emitted from the lagoon (0.1%) and from field applications (0.05%) when effluent was applied nearby. In disagreement with previous and current estimates of NH(3) emissions from confined animal feeding operation (CAFO) systems, and invalidating current assumptions that most or all emissions are in the form of NH(3), we found much smaller NH(3) emissions from animal housing (7%), lagoons (8%), and fields (2%) using independent measurements of N transformation and transport. Nitrogen input and output in the production system were evaluated, and 95% of input N was accounted for as output N from the system.     

Begging and provisioning in broods of asynchronously-hatched yellow-headed blackbird nestlings

Studies of begging have found a positive relationship between begging level and provisioning level. Studies of unequal nestlings, however, have found that small nestlings generally beg more but are fed less than their larger siblings. We manipulated the begging levels of yellow-headed blackbird (Xanthocephalus xanthocephalus) chicks to investigate how begging benefits individuals in broods of unequal siblings. Food-deprived chicks begged more and were fed more; satiated chicks begged less and were fed less. When we deprived each chick of a brood in turn, large and small chicks generally increased begging and received more provisioning. Small chicks, however, rarely received more food than their larger siblings even when they behged relatively more. Parent yellow-headed blackbirds increase provisioning to hungry begging chicks, but also allocate food based on relative offspring size.