Evaluation of adsorption capacities of humic acids extracted from Algerian soil on polyaniline for application to remove pollutants such as Cd(Ⅱ), Zn(Ⅱ) and Ni(Ⅱ) and characterization with cavity microelectrode

The adsorption capacities of new humic acids isolated from Yakouren forest (YHA) and Sahara (Tamenrasset: THA) soils (Algeria) and commercial humic acid (PFHA) on polyaniline emeraldine base (PEB) were studied at pH 6.6. Also the adsorption of heavy metals such as Cd2+, Zn2+ and Ni2+ on humic acid-polyaniline systems (HA-PEB) was investigated at the same conditions. HA-PEB compounds were characterized by scanning electron microscopy (SEM), infrared spectrometry and cavity microelectrode. In addition, batch adsorption and cavity microelectrode were used in the adsorption study of Cd2+, Zn2+ and Ni2+ on HA-PEB. To develop biocaptors of polluting metals using a cavity microelectrode modified by HA-PEB systems, the adsorption kinetic and adsorption capacity were investigated. The SEM analysis showed that the presence of humic acid affected the PEB surface and caused the formation of a granular morphology. The maximum adsorption capacities (qmax) of PFHA, THA and YHA determined by adsorption isotherms were 91.31, 132.1 and 151.0 mg/g, respectively. Batch adsorption results showed that qmax of Cd2+, Zn2+ and Ni2+ on HA-PEB followed the order: THA-PEB > YHA-PEB > PFHA-PEB. The voltammograms obtained with HA-PEB modified cavity microelectrode showed the appearance of new redox couples reflecting the adsorption of HA on PEB. Metal-humic acid-polyaniline voltammograms were characterized by appearance of oxidation-reduction couples or reduction wave corresponding to metal. Finally, the result may be exploited to develop a biocaptor based on the cavity microelectrode amended by THA-PEB and YHA-PEB.     

CO2 storage capacity estimation: Methodology and gaps

Implementation of CO₂ capture and geological storage (CCGS) technology at the scale needed to achieve a significant and meaningful reduction in CO₂ emissions requires knowledge of the available CO₂ storage capacity. CO₂ storage capacity assessments may be conducted at various scales—in decreasing order of size and increasing order of resolution: country, basin, regional, local and site-specific. Estimation of the CO₂ storage capacity in depleted oil and gas reservoirs is straightforward and is based on recoverable reserves, reservoir properties and in situ CO₂ characteristics. In the case of CO₂-EOR, the CO₂ storage capacity can be roughly evaluated on the basis of worldwide field experience or more accurately through numerical simulations. Determination of the theoretical CO₂ storage capacity in coal beds is based on coal thickness and CO₂ adsorption isotherms, and recovery and completion factors. Evaluation of the CO₂ storage capacity in deep saline aquifers is very complex because four trapping mechanisms that act at different rates are involved and, at times, all mechanisms may be operating simultaneously. The level of detail and resolution required in the data make reliable and accurate estimation of CO₂ storage capacity in deep saline aquifers practical only at the local and site-specific scales. This paper follows a previous one on issues and development of standards for CO₂ storage capacity estimation, and provides a clear set of definitions and methodologies for the assessment of CO₂ storage capacity in geological media. Notwithstanding the defined methodologies suggested for estimating CO₂ storage capacity, major challenges lie ahead because of lack of data, particularly for coal beds and deep saline aquifers, lack of knowledge about the coefficients that reduce storage capacity from theoretical to effective and to practical, and lack of knowledge about the interplay between various trapping mechanisms at work in deep saline aquifers.     

Nanoplastics are potentially more dangerous than microplastics

Environmental Chemistry Letters - Nanoplastics are probably much more dangerous for living organisms than microplastics because they are more abundant and reactive. They can potentially...     

Microorganisms for remediation of cadmium-contaminated soils

An alternative to the cleaning-up of agricultural soil contaminated by heavy metals is to avoid their transfer from soil to plant by inoculating soil with selected microorganisms able to biosorb heavy metals. Here, four bacteria species and a fungus isolated from contaminated soils revealed their ability to grow in the presence of high cadmium level. We tested their growth capacity related to pH and Cd concentration on synthetic and soil extract media. The comparison of their growth rate, the biosorbed cadmium rate and the specific biosorption allowed to select the most efficient microorganism to be used in bioremediation.     

Particulate matter pollution in Kunshan High-Tech zone: Source apportionment with trace elements, plume evolution and its monitoring

Particulate matter(PM) in the Kunshan High-Tech zone is studied during a three-month campaign. PM and trace elements are measured by the online pollution monitoring, forecastwarning and source term retrieval system AS3. Hourly measured concentrations of PM_(10), PM_(2.5) and 16 trace elements in the PM_(2.5) section(Ca, Pb, Cu, Cl, V, Cr, Fe, Ti, Mn, Ni, Zn, Ga, As, Se, Sr, Ba)are focused. Source apportionment of trace elements by Positive Matrix Factorization modeling indicates that there are five major sources, including dust, industrial processing, traffic,combustion, and sea salt with contribution rate of 23.68%, 21.66%, 14.30%, 22.03%, and 6.89%,respectively. Prediction of plume dispersion from concrete plant and traffic emissions shows that PM_(10) pollution of concrete plant is three orders of magnitude more than that of the traffic. The influence range can extend to more than 3 km in 1 hr. Because the footprint of the industrial plumes is constantly moving according to the local meteorological conditions, the fixed monitoring sites scattered in a few hundred meters haven't captured the heaviest pollution plume at the local scale of a few km~2. As a more intensive monitoring network is not operationally possible, the use of online modeling gives accurate and quantitative information of plume location, which increases the spatial pollution monitoring capacity and improves the understanding of measurement data. These results indicate that the development of the AS3 system, which combines monitoring equipment and air pollution modeling systems, is beneficial to the real-time pollution monitoring in the industrial zone.     

Variations of immune parameters in terrestrial isopods: a matter of gender, aging and Wolbachia

Ecological factors modulate animal immunocompetence and potentially shape the evolution of their immune systems. Not only environmental parameters impact on immunocompetence: Aging is one major cause of variability of immunocompetence between individuals, and sex-specific levels of immunocompetence have also been frequently described. Moreover, a growing core of data put in light that vertically transmitted symbionts can dramatically modulate the immunocompetence of their hosts. In this study, we addressed the influence of gender, age and the feminising endosymbiont Wolbachia (wVulC) on variations in haemocyte density, total PO activity and bacterial load in the haemolymph of the terrestrial isopod Armadillidium vulgare. This host–symbiont system is of particular interest to address this question since: (1) wVulC was previously shown as immunosuppressive in middle-aged females and (2) wVulC influences sex determination. We show that age, gender and Wolbachia modulate together immune parameters in A. vulgare. However, wVulC, which interacts with aging, appears to be the prominent factor interfering with both PO activity and haemocyte density. This interference with immune parameters is not the only aspect of wVulC virulence on its host, as reproduction and survival are also altered.     

Social chemistry

This article is both an essay to propose social chemistry as a new scientific discipline and a preface of the books Environmental Chemistry for a Sustainable World. Environmental chemistry is a fast emerging discipline aiming at the understanding the fate of pollutants in ecosystems and at designing novel processes that are safe for ecosystems. Past pollution should be cleaned, and future pollution should be predicted and avoided (Lichtfouse et al. 2005a). Such advices are still not applied by humans as demonstrated by the Fukushima nuclear event and global warming. Human errors are repeatable. We therefore suggest a possible solution, which involves bridging chemistry and society by integrating social sciences in chemical research. In particular, citizen discourse analysis should be useful to design chemicals that are both innovative and accepted by society. Then, we present the recent success of environmental chemistry through the foundation of the Association of Chemistry and the Environment; the increase in the impact factor of Environmental Chemistry Letters from 0.814 in 2006 to 2.109 in 2009; and over 35,000 chapter downloads of the book Environmental Chemistry. Lastly, we highlight major topics of the new book series Environmental Chemistry for a Sustainable World (Lichtfouse et al. 2011a, b). The two first volumes are entitled Nanotechnology and Health Risk, and Remediation of Air and Water Pollution.