Process design optimization and risk analysis

Hazard identification and risk assessment are key aspects in process plant design. They are often applied in the final stages of the process at whatever the cost, unless financial constraints are imposed. However, a much better solution would be to introduce risk analysis earlier by including it in earlier stages of the design process, such as when the cost of a plant and the cost of any accidents that may occur are estimated. In this paper, an optimization methodology is proposed, in which both cost and risk (with a deterministic approach) are taken into account, to improve on the current situation. If a decision variable is chosen, an objective function will be established that makes it possible to analyze variations in overall costs, including the cost of the investment and the cost of accidents. This leads to an optimum situation in which costs are kept to a minimum. Of course, this optimization is subject to constraints, the greatest of which is the fact that risk must not exceed tolerated threshold levels. The procedure is explained and two examples, one involving a toxic release and the other a BLEVE/fireball, are used to illustrate it.     

Integrated catalytic wet air oxidation and aerobic biological treatment in a municipal WWTP of a high-strength o-cresol wastewater

This study examines the feasibility of coupling a Catalytic Wet Air Oxidation (CWAO), with activated carbon (AC) as catalyst, and an aerobic biological treatment to treat a high-strength o-cresol wastewater. Two goals are pursued: (a) To determine the effect of the main AC/CWAO intermediates on the activated sludge of a municipal WasteWater Treatment Plant (WWTP) and (b) To demonstrate the feasibility of coupling the AC/CWAO effluent as a part of the influent of a municipal WWTP. In a previous study, a high-strength o-cresol wastewater was treated by AC/CWAO aiming to establish the distribution of intermediates and the biodegradability enhancement. In this work, the biodegradability, toxicity and inhibition of the most relevant intermediates detected in the AC/CWAO effluent were determined by respirometry. Also, the results of a pilot scale municipal WWTP study for an integrated AC/CWAO-aerobic biological treatment of this effluent are presented. The biodegradation parameters (i.e. maximum oxygen uptake rate and oxygen consumption) of main AC/CWAO intermediates allowed the classification of the intermediates into readily biodegradable, inert or toxic/inhibitory compounds. This detailed study, allowed to understand the biodegradability enhancement exhibited by an AC/CWAO effluent and to achieve a successful strategy for coupling the AC/CWAO step with an aerobic biological treatment for a high-strength o-cresol wastewater. Using 30%, as COD, of AC/CWAO effluent in the inlet to the pilot scale WWTP, the integrated AC/CWAO-biological treatment achieved a 98% of total COD removal and, particularly, a 91% of AC/CWAO effluent COD removal without any undesirable effect on the biomass.     

Minimization of the environmental impact in the unhairing of bovine hides

This study tests an alternative method to the traditional unhairing method used during the process of tanning the hides. The new method is based on the substitution of sodium sulfide by hydrogen peroxide as an unhairing agent in both hair recovery and recirculation of the floats employed in the process. The properties of the hides obtained using the two methods have been compared and the results indicate that those hides have similar physical, chemical, and organoleptic properties. However, the differences existing from an environmental point of view are significant. These include reductions of water consumption (approx 70%), chemical oxygen demand (approx 35%), toxicity (98%) and total kjendhal nitrogen (50%). Also, the risk associated with the production of hydrogen sulfide is eliminated, which implies a great improvement in terms of safety for the workers. Given the large amounts of water and chemical pollution discharged in the process, the reductions in absolute values represent a significant improvement. A financial assessment was carried out to demonstrate that the proposed new system is 16% more economic than the traditional one.     

High chrome exhaustion in a non-float tanning process using a sulphonic aromatic acid

Tanning processes performed in drums consume large amounts of water and chemicals, most of which end up in the wastewater. This study explores an alternative approach at an industrial scale to the traditional pickle-chrome tanning method. The new method replaces formic and sulphuric acids with sulphonic aromatic acid. Because it is done without float, there is a sizeable reduction in the amount of added salt and chrome salt as well as an increase in temperatures at the end of the tanning process. From an environmental perspective, the new method offers important advantages. For instance, there is no float addition in the tannage. Also, there are reductions of 94% and 99%, respectively, in the discharge of chlorides and chrome, as well as a 75% reduction in the residual float. Our financial assessment demonstrated that the new method is 42% cheaper than a traditional approach.     

Concentrations of organochlorine pesticides and 2,4,6-trichloroanisole in cork bark

Organochlorine pesticides are persistent lipophilic organic pollutants and tend to accumulate in growing plants. During growth, cork is in contact with the open air for long periods (9-12 years). Owing to the previous widespread use of organochlorine pesticides and their high persistence in the environment, there is a risk that residues of such pesticides may be present in cork.In this study, the concentrations of 14 organochlorine pesticides—all of which are indicators of environmental pollution—were analyzed in cork bark samples from three regions in Spain and one in Portugal. In addition, the concentrations of 2,4,6-trichlorophenol (TCP) and 2,4,6-trichloroanisole (TCA) were also analyzed.Our results show only very low concentrations of lindane, γ-HCH (<2.6 ng g⁻¹) and its byproducts α-HCH (<3.5 ng g⁻¹) and β-HCH (<0.6 ng g⁻¹).Among the DDT and its metabolites, only two were found: p,p′-DDT was found in a cork sample from Extremadura (0.1 ng g⁻¹) and p,p′-DDE was present at a maximum concentration of 2.9 ng g⁻¹ in a cork sample from Castile-La Mancha. However, all concentrations were well below the legal limit established by Regulation (EC) No. 396/2005 (10 ng g⁻¹ in foodstuffs). We can conclude, therefore, that the cork samples we studied complied with food safety standards.     

Phytostabilization of semiarid soils residually contaminated with trace elements using by-products: sustainability and risks

We investigated the efficiency of various by-products (sugarbeet lime, biosolid compost and leonardite), based on single or repeated applications to field plots, on the establishment of a vegetation cover compatible with a stabilization strategy on a multi-element (As, Cd, Cu, Pb and Zn) contaminated soil 4-6 years after initial amendment applications. Results indicate that the need for re-treatment is amendment- and element-dependent; in some cases, a single application may reduce trace element concentrations in above-ground biomass and enhance the establishment of a healthy vegetation cover. Amendment performance as evaluated by % cover, biomass and number of colonizing taxa differs; however, changes in plant community composition are not necessarily amendment-specific. Although the translocation of trace elements to the plant biotic compartment is greater in re-vegetated areas, overall loss of trace elements due to soil erosion and plant uptake is usually smaller compared to that in bare soil.     

Methylmercury levels and bioaccumulation in the aquatic food web of a highly mercury-contaminated reservoir

The low Ebro River basin (NE Spain) represents a particular case of chronic and long-term mercury pollution due to the presence of an industrial waste (up to 436 μg/g of Hg) coming from a chlor-alkali plant Albeit high total mercury (THg) levels have been previously described in several aquatic species from the surveyed area, methylmercury (MeHg) values in fish individuals have never been reported. Accordingly, in order to investigate bioaccumulation patterns at different levels of the aquatic food web of such polluted area, crayfish and various fish species, were analysed for THg and MeHg content. At the hot spot, THg mean values of crayfish muscle tissue and hepatopancreas were 10 and 15 times, respectively, greater than the local background level. Higher mean THg concentrations were detected in piscivorous (THg=0.848 ± 0.476 μg/g wet weight (ww); MeHg=0.672 ± 0.364 μg/g ww) than in non-piscivorous fish (THg=0.305 ± 0.163 μg/g ww; MeHg=0.278 ± 0.239 μg/g ww). Although these results indicated that THg in fish increased significantly with increasing trophic position, the percentage of the methylated form of Hg was not strongly influenced by differences in relative trophic position. This is an important finding, since the fraction of THg as MeHg in the top fish predator was unexpectedly lower than for other species of the aquatic food chain. Moreover, mean THg concentrations in piscivorous fish exceed the maximum level recommended for human consumption. From our findings, it is clear that for this specific polluted system, speciation becomes almost mandatory when risk assessment is based on MeHg, since single measurements of THg are inadequate and could lead to an over- or under-estimation of contamination levels.