Distribution of pesticides and heavy metals in trophic chain

Determination of triazines herbicides (atrazine and simazine) by high performance liquid chromatography (HPLC) in samples of trophic chain were worked out. Determination limits of 0.5 μg g⁻¹ for atrazine, 0.8 μg g⁻¹ for simazine with pesticides recovery of 70–77% in trophic chain samples were obtained. The content of simazine in soils was in range 1.72–57.89 μg g⁻¹, in grass 5–88 μg g⁻¹, in milk 2.32–15.29 μg g⁻¹, in cereals 10.98–387 μg g⁻¹, in eggs 30.14–59.48 μg g⁻¹, for fruits: 2.45–6.19 μg g⁻¹. The content of atrazine in soils was in range 0.69–19.59 μg g⁻¹, in grass 7.85–23.85 μg g⁻¹, in cereals 1.88–43.08 μg g⁻¹. Cadmium, lead and zinc were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) in the same samples as atrazine and simazine. Determination limits for cadmium 5 × 10⁻³ μg g⁻¹, for lead 1 × 10⁻² μg g⁻¹, and for zinc 0.2 × 10⁻³ μg g⁻¹, were obtained. The content of cadmium in soil was in range 0.13–5.89 μg g⁻¹, in grass 114–627.72 × 10⁻³ μg g⁻¹, in milk 8.88–61.88 × 10⁻³ μg g⁻¹, in cereals 0.20–0.31 μg g⁻¹, in eggs 0.11–0.15 μg g⁻¹, in fruits 0.23–0.59 μg g⁻¹. The content of lead in soils was in range 0.57–151.50 μg g⁻¹, in grass 0.16–136.57 μg g⁻¹, in milk 1.16–3.74 μg g⁻¹, in cereals 1.05–5.47 μg g⁻¹, in eggs 5.79–55.87 μg g⁻¹, in fruits 21.00–87.36 μg g⁻¹. Zinc content in soil was in range 9.15–424.5 μg g⁻¹, in grass 35.20–55.87 μg g⁻¹, in milk 20.00–34.38 μg g⁻¹, in cereals 14.94–28.78 μg g⁻¹, in eggs 15.67–32.01 μg g⁻¹, in fruits 14.94–18.88 μg g⁻¹.

Described below extraction and mineralization methods for particular trophic chains allowed to determine of atrazine, simazine, cadmium, lead and zinc with good repeatability and precision. Emphasis was focused on liquid–liquid extraction and solid-phase extraction of atrazine and simazine from analysed materials, as well as, on monitoring the content of herbicides and metals in soil and along trophic chain. Higher concentration of pesticides in samples from west region of Poland in comparison to that of east region is likely related to common applying them in Western Europe in relation to East Europe. The content of metals strongly depends on samples origin (industry area, vicinity of motorways).     

Alveolar Macrophage (AM) Mobility Reduction as a Result of Long-Term Exposure to High Dust Concentration in Inhaled Air

The influence of high concentration of insoluble particles in inhaled air on the alveolar macrophage (AM) mobility is analyzed. Kinetics of phagocytosis and the mobility of AM as a function of overloading is proposed. Three patterns of AM displacement on the surface of alveolus are distinguished depending on the loading of the surface with insoluble deposits, namely, directional being a result of surfactant activity, directional with a chemotactic bias, and purely random. The exit time of AM from alveolus under overloading is calculated.     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.     

Force-Velocity Characteristics of Individual Human Skeletal Muscles: TBCIat and TBCIong. Outline of the Method

The aim of the work is to outline a procedure of finding force-velocity (F–V) characteristics (F = f(V)) of individual skeletal muscles of the human locomotor system. The presentation is based on an example concerning extensors of the elbow joint: the lateral and long heads of triceps brachii (TBCIat and TBCIong). The experimental part of the procedure involves a natural movement of using the upper extremity to push an external object of variable, adjustable load, engaging both the elbow and shoulder joint.

Five men aged 23 took part in the experiment. Their task was to push the handle of a physical pendulum whose moment of inertia could be adjusted within the range of 58 kg m²-450 kg m², so as to give it maximum angular velocity. During each trial the movement of the trunk, of the upper extremity and of the pendulum was video recorded and the force applied with the hand to the handle of the pendulum was measured.

In order to find the F–V characteristics a simulation model SHOULDER was used, which is capable of solving the synergy problem for muscles of the arm and the shoulder girdle.

It was found that despite considerable dispersion of experimental points the respective regression lines revealed a clear tendency of decreasing muscle force for increased shortening velocity of the monoarticular head (TBCIat) and of increasing muscle force for increased lengthening velocity of the biarticular head (TBCIong) of the triceps brachii muscle.     

Deposition and Retention of Ultrafine Aerosol Particles in the Human Respiratory System. Normal and Pathological Cases

The particle number concentration in ambient air is dominated by nanometersized particles. Recent epidemiological studies report an association between the presence of nanoparticles in inhaled air at the workplace and acute morbidity and even mortality in the elderly. A theoretical model of deposition of 20 nm particles in the human alveolus was formulated. Gas flow structure and deposition rate were calculated for alveoli with different elastic properties of lung tissue. Data obtained in the paper show increased convective effects and diffusional rate of deposition of nanoparticles for alveoli with higher stiffness of the alveolar wall. The retention of deposited particles is also higher in these pathological alveoli. Results of our calculations indicate a possibility of existence of a positive loop of coupling in deposition and retention of nanoparticles in the lung with pathological changes.     

The Moderating Role of Hardiness and Social Support in the Relation Between Job Stressors and Well-Being. A Lesson From a Clerical Women Sample

The study concerns the moderating role of two variables—hardiness and social support—in the relation between job stressors and well-being. It was checked if there is a connection between hardiness and social support, and if these variables are directly related to the level of well-being. It was also hypothesized that hardiness and social support buffer the negative influence of stressors on well-being. The fact that social support and well-being are multidimensional variables was taken into account.

The cross-sectional study was conducted on a group of 200 women employed as office workers. The results showed that hardiness correlates with the indexes of emotional support as well as practical support coming from supervisors. The connection, however, was not strong. Hardiness and social support were directly connected with the level of well-being. Interaction of these two independent variables played a marginal role. As far as the buffering role of these variables was concerned, the results have shown that hardiness did not play a buffering role and social support did to a limited degree only.

The results of the study proved that it is justifiable to treat social support and well-being as multidimensional variables.     

Identification of Driver Model Parameters

The paper presents a driver model, which can be used in a computer simulation of a curved ride of a car. The identification of the driver parameters consisted in a comparison of the results of computer calculations obtained for the driver-vehicle-environment model with different driver data sets with test results of the double lane-change manoeuvre (Standard No. ISO/TR 3888:1975, International Organization for Standardization [ISO], 1975) and the wind gust manoeuvre. The optimisation method allows to choose for each real driver a set of driver model parameters for which the differences between test and calculation results are smallest. The presented driver model can be used in investigating the driver-vehicle control system, which allows to adapt the car construction to the psychophysical characteristics of a driver.     

The Influence of Anchor Devices on the Performance of Retractable Type Fall Arresters Protecting Against Falls From a Height

Retractable type fall arresters are part of the equipment used for protecting people against falls from a height. They are an intermediate part between full body harness worn by a man and the structural anchor at the worksite. The most important task of retractable type fall arresters is to arrest people’s falls and to reduce their harmful consequences. Information received from users as well as laboratories testing protective equipment indicates that the performance of such equipment is incorrect under specific conditions. The paper is concerned with an analysis of the conditions in which retractable type fall arresters demonstrate intermittent performance and with an explanation of that phenomenon. The results of tests investigating anchor devices and the performance of retractable type fall arresters are presented. External and internal factors contributing to intermittent performance have been determined and guidelines for safer use of these devices have been developed.     

Analysis of Conditions and Organization of Work of Notebook Computer Users

Abstract

Aim. The aim of this study was to evaluate working conditions with a notebook computer (notebook) as a potential cause of musculoskeletal disorders. Material and methods. The study had 2 stages. The first one was a questionnaire survey among 300 notebook users. The next stage was an expert analysis of 53 randomly selected workstations. The questionnaire survey included questions about the participants, their working conditions, work organization and also duration of work with a notebook. Results and conclusions. The results of the research showed that most examined operators used a notebook as a basic working tool. The most important irregularities included an unadjustable working surface, unadjustable height of the seat pan and backrest, unadjustable height and distance between the armrests and no additional ergonomic devices (external keyboard, docking station, notebook stand or footstool).