Connecting the Dots: Public Engagement with Environmental Data

Air pollution and other environmental hazards are often imperceptible and need to be made publicly visible. The paper argues for the importance of visualizations in drawing public attention to imperceptible hazards and in providing the public with access to empirical data describing the risks. It also argues for critical inquiry into hazards’ selective visibility as it is produced by visualizations. The impact of visualizations and their selective visibility are considered through the example of a public art project called Particle Falls installed in 2014 in Pittsburgh, a city with a long history of both ignoring air pollution and working to ameliorate this problem. I examine the impact and selective visibility of Particle Falls by considering the underlying production of data, as well as context and support systems for this visualization, and by comparing it with other visualizations of local air quality.     

Diel cycles of arsenic speciation due to photooxidation in acid mine drainage from the Iberian Pyrite Belt (Sw Spain)

Twenty four hours diel cycles of arsenic speciation in Acid Mine Drainage (AMD) due to photooxidation have been reported for the first time. AMD samples were taken during 48 h (31st March and 1st April, 2005) at 6 h intervals from the effluent of a massive abandoned polymetallic sulphide mine of the Iberian Pyrite Belt (Sw Spain). Samples were preserved in situ using cationic exchange prior to analysis by coupled high performance liquid chromatography, hydride generation and atomic fluorescence spectrometry (HPLC-HG-AFS) for arsenic speciation. The results indicated the presence of inorganic arsenic species with daily means of 262mugl(-1) for As(V) and 107 microg l(-1) for As(III). No marked diel trend was observed for As(V). However, a marked diel trend was observed for As(III) in the two studied days, with maximum concentrations during nighttime (141-143 microg l(-1)) and minimum concentrations at daytime (72-77 microg l(-1)). This difference in concentration during daytime and nighttime is ca. 100%. A similar diel cycle was observed for iron. An explanation for the arsenic diel cycles observed is the light induced photooxidation of As(III) and the elimination of As(V) due to its adsorption onto Fe precipitates during the daytime. Furthermore, the diel changes in arsenic speciation emphasize the importance of designing suitable sampling strategies in AMD systems.     

Determination of microbiological contamination,antibacterial and antioxidant activities of natural plant hazelnut (Corylus avellana L.) pollen

The aim of our study is to determine microbial contamination, antibacterial and antioxidant activities of 14 pollen samples of Corylus avellana collected from different locations in Slovakia. Microbiological analysis was carried out in two steps: microbiological assays and studies of antibacterial activity of pollen extracts. The antimicrobial properties of pollen extracts were carried out with the disc-diffusion method. Methanol (70%), ethanol (70%) and distilled water were used for pollen extracts. Five strains of bacteria such as gram-negative (Salmonella enterica subsp. enterica CCM 3807, Escherichia coli CCM 2024, and Yersinia enterocolitica CCM 5671) and gram-positive (Staphylococcus aureus CCM 2461 and Bacillus thuringiensis CCM 19T) were tested. Antioxidant activity of pollen extracts was determined by the DPPH method. Bacterial analysis includes the determination of the total bacterial count ranged from 4.08 to 4.61 log CFU g^?1, mesophilic aerobic bacteria ranged from 3.40 to 4.89 log CFU g^?1, mesophilic anaerobic bacteria ranged from 3.20 to 4.52 log CFU g^?1, coliform bacteria ranged from 3.30 to 4.55 log CFU g^?1, yeasts and filamentous fungi ranged from 3.00 to 3.56 log CFU g^?1. Microscopic filamentous fungi Aspergillus spp., Alternaria spp., Penicillium spp., Cladosporium spp., Rhizopus spp., and Paecylomyces spp. were isolated from hazelnut pollen. Yersinia enterocolitica was the most sensitive strain among ethanolic and methanolic pollen hazelnut extracts. Staphylococcus aureus was the most sensitive strain against aqueous hazelnut pollen extracts. We determined the following sensitivity against ethanol pollen extracts respectively: Yersinia enterocolitica?>?Salmonella enterica?>?Staphylococcus aureus?>?Bacillus thuringiensis?>?Escherichia coli. Methanol pollen extracts had shown following sensitivity: Yersinia enterocolitica?>?Salmonella enterica?>?Escherichia coli?>?Staphylococcus aureus?>?Bacillus thuringiensis. Aqueous extracts had shown the following sensitivity: Staphylococcus aureus?>?Salmonella enterica?>?Escherichia coli?>?Bacillus thuringiensis?>?Yersinia enterocolitica. Hazelnut pollen extracts have over 82% antioxidant capacity in samples from non-urban zones. An elevated level of antioxidant potential in the pollen is determined by its biological properties conditioned by biologically active substances. DPPH method allowed characterizing pollen as a source of antioxidants.     

Improving dialogue among researchers,local and indigenous peoples and decision-makers to address issues of climate change in the North

Ambio - The Circumpolar North has been changing rapidly within the last decades, and the socioeconomic systems of the Eurasian Arctic and Siberia in particular have displayed the most dramatic...     

UV-C-activated persulfate oxidation of a commercially important fungicide: case study with iprodione in pure water and simulated tertiary treated urban wastewater

Recently, the European Food Safety Authority (EFSA) has banned the use of iprodione (IPR), a common hydantoin fungicide and nematicide that was frequently used for the protective treatment of crops and vegetables. In the present study, the treatment of 2 mg/L (6.06 μM) aqueous IPR solution through ultraviolet-C (UV-C)-activated persulfate (PS) advanced oxidation process (UV-C/PS) was investigated. Baseline experiments conducted in distilled water (DW) indicated that complete IPR removal was achieved in 20 min with UV-C/PS treatment at an initial PS concentration of 0.03 mM at pH?=?6.2. IPR degradation was accompanied with rapid dechlorination (followed as Cl^? release) and PS consumption. UV-C/PS treatment was also effective in IPR mineralization; 78% dissolved organic carbon (DOC) was removed after 120-min UV-C/PS treatment (PS?=?0.30 mM) compared with UV-C at 0.5 W/L photolysis where no DOC removal occurred. LC analysis confirmed the formation of dichloroaniline, hydroquinone, and acetic and formic acids as the major aromatic and aliphatic degradation products of IPR during UV-C/PS treatment whereas only dichloroaniline was observed for UV-C photolysis under the same reaction conditions. IPR was also subjected to UV-C/PS treatment in simulated tertiary treated urban wastewater (SWW) to examine its oxidation performance and ecotoxicological behavior in a more complex aquatic environment. In SWW, IPR and DOC removal rates were inhibited and PS consumption rates decreased. The originally low acute toxicity (9% relative inhibition towards the photobacterium Vibrio fischeri) decreased to practically non-detectable levels (4%) during UV-C/PS treatment of IPR in SWW.

     

The development of probabilistic models to estimate accident risk (due to runway overrun and landing undershoot) applicable to the design and construction of runway safety areas

The risks of landing overrun (LDOR – LanDing OverRun), Take-off Overrun (TOOR – Take-Off OverRun) and landing undershoot (LDUS – LanDing UnderShoot) are dependent on multiple factors related to operating conditions. These include wind, runway surface conditions, landing or take-off distances required, the presence of obstacles, runway distance available, the existence and dimensions of runway safety areas.In this paper we propose risk models for runway overrun and landing undershoot, using a probabilistic approach. These models are supported by historical data on accidents in the area around the runway and will enable us to determine if the risk level is acceptable or whether action must be taken to mitigate such risks at a given airport. Furthermore, these models permit comparison of the results of different risk mitigation actions in terms of operational risk and safety.The principal advantage of this method is the high quality results obtained for a limited investment in terms of time, computing power and data. As such the method is extremely practical and easy to apply in aerodrome planning, development and operation.     

A preliminary assessment of the potential environmental and human health impact of unsymmetrical dimethylhydrazine as a result of space activities

A preliminary assessment of the potential environmental and human health impact of UDMH as a result of space activities has been carried out applying a theoretical approach in comparison with selected experimental data. The theoretical framework includes QSAR, ADME and PASS modelling as well as studies on the possible atmospheric dispersion of UDMH as calculated applying the OML-Multi model. The possible impact on the environment and the human health has been elucidated and it has been concluded that UDMH especially inside the fall region of burned-out rocket stages constitute a significant threat to both environmental and human health, the latter as a results of the carcinogenic, mutagenic, convulsant, teratogenic and embryotoxic characteristics of UDMH in addition to the general toxic characteristics of the compound.     

Environmental Impact Assessment of the Mining and Concentration Activities in the Kola Peninsula, Russia by Multidate Remote Sensing

On the Kola Peninsula, the mining and concentration industry exerts anthropogenic impact on the environment. Tailing dumps cause airborne pollution through dusting, and waterborne pollution due to direct dumping and accidental releases. The objectives were: (1) to analyse multidate satellite imagesfor 1964–1996 to assess the environmental pollution from themining and concentration activity in the Kola in temporal perspective; (2) to evaluate remote sensing methods for integrated environmental impact assessment. The area of mining and industrial sites steadily expands and amounted to 94 km² in 1996. The polluted water surface amounted to at least 150 km² through dumping in 1978 and to 106 km² in1986 due to dusting. Thus, the impact from the mining and concentration activity should be reconsidered as more significant than it was officially anticipated. In the past the main mechanism of pollution wasdirect dumping into the lakes. Currently and in future, airborne pollution after dusting storms will dominate. The effective recultivation of the tailing dumps will be a long-term process. For effective assessment of impacts from the mining and concentration industry, remote sensing methods should be complemented by in-situ measurements, fieldwork, and mathematical modelling.     

Kinetic study of the OH reaction with some hydrochloroethers under simulated atmospheric conditions

Using the relative rate technique, rate constants for the gas-phase reactions of hydroxyl radicals with 2-chloroethyl methyl ether (k₁), 2-chloroethyl ethyl ether (k₂) and bis(2-chloroethyl) ether (k₃) have been measured. Experiments were carried out at (298 ± 2) K and atmospheric pressure using synthetic air as bath gas. Using n-pentane and n-heptane as reference compounds, the following rate constants were derived: k₁ = (5.2 ± 1.2) × 10^?12, k₂ = (8.3 ± 1.9) × 10^?12 and k₃ = (7.6 ± 1.9) × 10^?12, in units of cm³ molecule^?1 s^?1. This is the first experimental determination of k₂ and k₃ under atmospheric pressure. The rate constants obtained are compared with previous literature data and the observed trends in the relative rates of reaction of hydroxyl radicals with the ethers studied are discussed. The atmospheric implications of the results are considered in terms of lifetimes and fates of the hydrochloroethers studied.