Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).     

The influence of lindane and lindane metabolites on microsomal and mitochondrial ATPase in vitro

In vitro investigations of the influence of lindane and its metabolites were performed on microsomal and mitochondrial ATPases from liver, kidney and brain of rat and mouse. The microsomal Na+-K+-ATPases in rat liver were inhibited by the tested substances. An increase of activity was observed only with 2.5 X 10(-5) M gamma-HCH. Effects on the microsomal Na+-K+-ATPase from kidney and brain of rat were also indicated. The mitochondrial enzyme in rat liver was stimulated by all the compounds tested at concentrations of 10(-4) M - 10(-2) M. The effects on mitochondrial enzymes from kidney and brain varied in dependence on the tested substances. In the microsomes and mitochondria of mouse an influence on the Na+-K+-ATPases similar to the effects on the preparations from organs of rat was evident.     

The Impact of Agriculture On Dissolved Nitrogen and Phosphorus Cycling in Temperate Ecosystems

Although most research has focussed on inorganic nutrient forms of nitrate (NO^-₃) and phosphorus (PO³₄) in runoff and receiving waters, nitrogen loss from agricultural land can also occur in organic and ammonium-nitrogen form; phosphorus losses, although often dominated by particulate transport, may occur in soluble organic and inorganic form. Furthermore, fluxes between different species may take place during transport from the land to the stream and as a result of in-stream, in-river or in-lake transformations. Knowledge of the spatial and temporal variation in all nitrogen species and phosphorus fractions in a drainage basin is therefore essential if the wider environmental significance of elevated nutrient concentrations in natural waters are to be assessed. This paper reviews recent work on N and P losses from agricultural land and presents some results from two intensive agricultural catchments: Slapton, Devon and the river Windrush catchment in the Cotswolds.     

Multicriteria Group Decision-making Model for Environmental Conflict Analysis in the Cape Region,Mexico

This paper is concerned with developing a model for group decision making under multiple criteria. The multiple criteria group decision making (MCGDM)problem involves a set of feasible land use patterns that are evaluated on the basis of multiple, conflicting and noncommensurate criteria by a group of individuals. The model integrates the Analytic Hierarchy Process (AHP) and an integer mathematical programming method. The former provides a tool for structuring the decision problem and determining land suitability for different socio-economicactivities (the uses of land), the latter is used to identify the land use pattern that maximizes consensus among interest groups. The model is used to analyze environmental conflict over land resource allocation in the Cape Region of Mexico.     

Exploring Chemical Variables in Ligustrum lucidum Ait. F. Tricolor (Rehd.) Rehd. in Relation to Air Pollutants and Environmental Conditions

Ligustrum lucidum Ait. f. tricolor (Rehd.) Rehd. in relation to atmospheric pollutants in Córdoba city, Argentina. The study area receives regional pollutants and was categorized taking into account traffic level, industrial density, type of industry, location of the sample point in relation to the street corner, treeless condition, and topographic level. Dried weight/fresh weight ratio (DW/FW) and specific leaf area (SLA) were calculated, and concentrations of chlorophylls, carotenoids, total sulfur, soluble proteins, malondialdehyde (MDA), and hydroperoxy conjugated dienes (HPCD) were determined in leaf samples. Sulfur content correlates positively with traffic density and SLA correlates negatively with some combinations of the categorical variables; MDA correlates positively with topographic level and total protein concentration correlates negatively with treeless condition. On the basis of our results, traffic, location of trees, type of industry, situation of a tree with respect to others, and topographic level are the environmental variables to bear in mind when selecting analogous sampling points in a passive monitoring program. An approximation to predict tree injury may be obtained by measuring DW/FW ratio, proteins, pigments, HPCD, and MDA as they are responsible for the major variability of data.