Residues of endosulfan and other selected organochlorine pesticides in farm areas of the Lower Fraser Valley, British Columbia, Canada

Crop soils, ditch sediments, and water flowing from several farm areas to salmon tributary streams of the Fraser River in the Lower Fraser Valley (LFV) of British Columbia, Canada, were sampled in 2002-2003 to quantify for residues of an organochlorine cyclodiene pesticide, endosulfan (END = alpha-endosulfan + beta-endosulfan + endosulfan sulfate). Residues from historical use of other selected organochlorine pesticides, namely, cyclodienes (aldrin, alpha-chlordane, gamma-chlordane, dieldrin, endrin, endrin aldehyde, heptachlor, and heptachlor epoxide), hexachlorocyclohexanes [alpha-benzene-hexachloride (alpha-BHC), beta-BHC, delta-BHC, and gamma-BHC (lindane)], and DDT-related compounds (p,p-DDT, p,p-DDD, p,p-DDE, and methoxychlor) were also determined. Reference and background levels of these pesticides in ditches leading to fish streams were obtained from pristine watershed areas. Varying amounts of END residues were detected in soils (<0.02-5.60 mg kg(-1) dry wt.) and ditch sediments (<0.02-3.33 mg kg(-1) dry wt.) in mainly three of five farm areas sampled. Likewise, residues (excluding END) of other selected organochlorine compounds such as aldrin, BHC, chlordane, endrin, p,p-DDT, methoxychlor, and their respective major transformation products (endosulfan sulfate, dieldrin, endrin aldehyde, heptachlor, heptachlor epoxide, p,p-DDD, and p,p-DDE) were found in crop soils (<0.02-16.2 mg kg(-1) dry wt.) and sediments (<0.02-9.73 mg kg(-1) dry wt.). Most of these pesticides (END: <0.01-1.86 microg L(-1); other selected organochlorine pesticides: <0.0.1-1.50 microg L(-1)) were also found in ditch water leading to salmon streams in several farms. The END levels of crop soils from the same LFV study farms in 1994 and 2003 indicated an estimated decline of 22% to 1.35 mg kg(-1) dry wt. during that period. This reduction was probably due to the increasing use of alternate pesticides (e.g., organophosphorus compounds). Some possible biological implications of these pesticide residues on nontarget organisms in the LFV are discussed.     

Bird species migration ratio in East Asia, Australia, and surrounding islands

Bird migration and its relationship with the contemporary environment have attracted long-term discussion. We calculated the avian migration ratio (the proportion of breeding species that migrate) in the areas from 70°E to 180°E and examined its relationship with the annual ranges of ambient temperature, primary productivity (estimated by the Enhanced Vegetation Index), and precipitation, along with island isolation and elevational range. The avian migration ratio increased with increasing latitude in general but varied greatly between the two hemispheres. Additionally, it showed minimal differences between continents and islands. Our analyses revealed that the seasonality of ambient temperature, which represents the energy expenditure of birds, is the dominant factor in determining bird species migration. Seasonality in primary productivity and other environmental factors play an indirect or limited role in bird species migration. The lower avian migration ratio in the Southern Hemisphere can be attributed to its paleogeographical isolation, stable paleoclimate, and warm contemporary environment. Under current trends of global warming, our findings should lead to further studies of the impact of warming on bird migration.     

风暴潮风险研究进展

中国沿海是全球少数几个风暴潮风险最大的区域之一。受全球气候变暖和海平面上升的影响,沿海地区风暴潮灾害风险水平呈显著上升的趋势。从灾害风险理论出发,在对风暴潮风险的认识、风暴潮危险性评估、风暴潮易损性评估,以及风暴潮综合风险评估等四个方面,系统地总结了目前风暴潮风险研究的最新成果、研究进展和存在的主要问题。总体来看,现阶段风暴潮风险评估研究还比较薄弱,未来的风暴潮风险研究应该由单要素评估走向综合评估,加强风暴潮风险评估的综合性和系统性。随着沿海地区社会经济的发展,应充分考虑全球变化和海平面上升对未来风暴潮风险的影响,完善风暴潮综合风险评估体系,提升风暴潮预报预警能力,为风暴潮灾害的防灾减灾工作提供科学依据。     

The effect of limiting nutrient on metal toxicity to selenastrum capricornutum

Metal toxicity on selenastrum capricornutum were examined by batch culture and chemostat culture system. EC₅₀ values under nutrient‐limited condition and saturated condition were compared. The two EC_5Os differed by a factor of 10.6 for Cd in batch test, and differed by a factor of 6.5 in continuous test. Both batch and continuous test results indicate that inhibition on algal growth is more severe under nutrient‐limited conditions compared to that under near saturation conditions.

Strong correlation, as characterized by the correlation coefficient ρ, were found between the activation level (nutrient requirement) and the tolerance of microorganisms to the toxicant. ρ is equal to 0.9 for the case of Cd in batch test and 0.6 in continuous test. The theory in this study provides generally good estimations to the dose‐response relationship at limiting nutrient conditions. The study indicate that nutrient conditions constitute an important factor in algal toxicity tests.     

The application and evaluation research of coffee residue ash into mortar

Coffee residue is usually regarded as a kind of agriculture waste; as its quantity increases the treatment of coffee residue will become an environmental problem. This research is innovative in that it derives the possibility of recycle application using coffee residue ash for cement replacement. In this research, coffee residue is burned in an electronic oven to three kinds of coffee residue ash at 500, 600 and 700 °C, and then appropriate apparatus is used to check the chemical and physical properties of these three types of coffee residue ash. After a general comparison, this study selected 500 and 600 °C coffee residue ashes with 2, 3, 5, 10 and 15 % cement replacements to make 5 cm³ cube mortar specimen to test different curing ages’ compressive strength. Through measurement and experiment, this research found that the compressive strength decreased by adding 500 or 600 °C coffee residue ash into the mortar. By considering waste reduction and practice application, this research derives that using the 600 °C coffee residue ash with 10 % replacement is better than others application, such using result also can get valuable efficiencies of financial and CO₂ reduction.     

Effect of Common Chemical Treatments on the Process Kinetics and Mechanical Properties of Flax/Epoxy Composites Manufactured by Resin Infusion

Chemical treatments are widely employed to improve the fiber-matrix adhesion in composites based on eco-friendly fibers such as flax. To better understand the influence of these treatments on processing behavior, this study characterized the surface chemistry and morphology of woven flax fabrics treated by acetone, alkaline, silane and diluted epoxy. Flax/epoxy composites were then manufactured by resin infusion and the flow front and preform thickness evolution was monitored. The alkaline treatment was shown to result in a 50 % increase in equivalent permeability due to an increase in porosity which led to a decrease in flexural properties. The processing results were found to be in good agreement with predictions of a 1-dimensional model. This study suggests that infusion times are not considerably affected by the observed changes in surface energy. However, other implications of the treatments such as an increase in fibrillation can alter the infusion times significantly.

     

A new design of groundwater sampling device and its application

Compounds in the atmosphere contaminate samples of groundwater. An inexpensive and simple method for collecting groundwater samples is developed to prevent contamination when the background concentration of contaminants is high. This new design of groundwater sampling device involves a glass sampling bottle with a Teflon-lined valve at each end. A cleaned and dried sampling bottle was connected to a low flow-rate peristaltic pump with Teflon tubing and was filled with water. No headspace volume was remained in the sampling bottle. The sample bottle was then packed in a PVC bag to prevent the target component from infiltrating into the water sample through the valves. In this study, groundwater was sampled at six wells using both the conventional method and the improved method. The analysis of trichlorofluoromethane（ CFC-11 ） concentrations at these six wells indicates that all the groundwater samples obtained by the conventional sampling method were contaminated by CFC-11 from the atmosphere. The improved sampling method greatly eliminated the problems of contamination, preservation and quantitative analysis of natural water.     

Diurnal concentrations variations,size distributions for ambient air particles and metallic pollutants (Cr,Mn, Ni,Cd, Pb) during summer season at a traffic area

This study characterized and discussed particulate ambient air particulate concentrations and seasonal variations for PM₁₈, PM₁₀, PM_2.5, and PM₁ during June 2013–July 2013 at this traffic sampling site. In addition, this study also characterized the ambient air particulates size distributions by using MOUDI-100S4 sampler to collect 1-day the ambient suspended particles (PM₁₈, PM₁₀, PM_2.5, and PM₁) at this sampling site. In addition, the study also showed that the main pollutants contributions were from traffic and residual areas. As for the pollutants seasonal concentrations variations, the results indicated that the average particle concentrations orders were all displayed as daytime?>?nighttime for PM₁₈, PM₁₀, PM_2.5 and PM₁ at this characteristic sampling site. The results further indicated that the mean highest of metal concentrations in this study indicated that the average metal concentration were all displayed as Mn?>?Cr?>?Ni?>?Pb?>?Cd for PM₁₈, PM₁₀, PM_2.5 and PM₁ on daytime and nighttime at this characteristic sampling site.     

Decomposition of perfluorooctanoic acid by microwaveactivated persulfate: Effects of temperature, pH, and chloride ions

Microwave-hydrothermal treatment of persistent and bioaccumulative perfluorooctanoic acid (PFOA) in water with persulfate (S₂O ₈ ^2? ) has been found effective. However, applications of this process to effectively remediate PFOA pollution require a better understanding on free-radical scavenging reactions that also take place. The objectives of this study were to investigate the effects of pH (pH = 2.5, 6.6, 8.8, and 10.5), chloride concentrations (0.01?C0.15 mol·L^?1), and temperature (60°C, 90°C, and 130°C) on persulfate oxidation of PFOA under microwave irradiation. Maximum PFOA degradation occurred at pH 2.5, while little or no degradation at pH 10.5. Lowering system pH resulted in an increase in PFOA degradation rate. Both high pH and chloride concentrations would result in more scavenging of sulfate free radicals and slow down PFOA degradation. When chloride concentrations were less than 0.04 mol·L^?1 at 90°C and 0.06 mol·L^?1 at 60°C, presence of chloride ions had insignificant impacts on PFOA degradation. However, beyond these concentration levels, PFOA degradation rates reduced significantly with an increase in chloride concentrations, especially under the higher temperature.     

Toxicity of propargylic alcohols on green alga--Pseudokirchneriella subcapitata

The present study evaluates the toxicity of 34 propargylic alcohols, including primary, primary homo-, secondary, and tertiary alcohols, based on their effects on phytoplankton. A closed-system algal toxicity test was applied because the closed-system technique presents more realistic concentration-response relationships for the above compounds than the conventional batch tests. The green alga, Pseudokirchneriella subcapitata, was the test organism and final yield and growth rate were chosen as the test endpoints. Among all the propargylic alcohols tested, 1-pentyn-3-ol is the most toxic compound with its EC50 equal to 0.50 mg L(-1), which can be classified as a "R50" compound (very toxic to aquatic organisms, EC50/LC50 < 1 mg L(-1)), following the current practice for classification of chemicals in the European Union (EU). There are several other compounds including 2-decyn-1-ol, 3-decyn-1-ol, 1-hexyn-3-ol, 3-butyn-2-ol, and 3-hexyne-2,5-diol, which deserve more attention for their possible adverse impact on the aquatic environment, because these alcohols can be classified as "R51" compounds (toxic to aquatic organisms, EC50/LC50 between 1 and 10 mg L(-1)). Compared to the base-line toxicity relationship (narcosis QSAR) derived previously, tertiary propargylic alcohols can be identified as nonpolar narcotic chemicals, while secondary alcohols and primary alcohols with low molecular weight generally exhibit obvious excess toxicity in relation to the base-line toxicity. Finally, quantitative structure-activity relationships were established for deriving a preliminary estimation of the toxicity of other propargylic alcohols.