The Shape Memory Properties of Biodegradable Chitosan/Poly(l-lactide) Composites

The shape memory behavior of PLLA (poly(l-lactide)) and chitosan/PLLA composites was studied. PLLA and chitosan were compounded to fabricate novel materials which may have biodegradability and biocompatibility. Chitosan does not significantly affect the glass and melting transition temperature of the PLLA. Both the pure PLLA and chitosan/PLLA composites showed shape memory effect arising from the viscoelastic properties of PLLA comprised of semi crystalline structures. The shape recovery ratio of the chitosan/PLLA composites decreased significantly with increasing chitosan contents due to the incompatibility between PLLA and chitosan. Phase separation structures of the composites were observed by using atomic force microscopy. To obtain good shape memory effect, the chitosan content should be below 15 wt%.     

Characterization of demethylation of methylmercury in cultured astrocytes

Mercury (Hg) is a well-known neurotoxicant but its toxicity depends on the species present. A steady emergence of inorganic Hg in the brain following chronic and accidental exposure to methylmercury (MeHg) has suggested that MeHg can undergo demethylation. The objective of this study is to develop an in vitro model to study factors affecting Hg demethylation in the central nervous system. Astrocytes obtained from neonatal rat pups were cultured for 24h with 1 microM MeHg in the presence of two pro-oxidants, buthionine sulphoximine (BSO) and rotenone. The BSO treatment produced a 21% increase in reactive oxygen species (ROS) content compared to the control (control vs. BSO; 100+/-1.35 vs. 121+/-1.52 relative fluorescence units (RFU)mg(-1) protein, p<0.001) but did not affect total Hg accumulation (control vs. BSO=86.5+/-4.14 ng mg(-1) vs. 95.7+/-9.26 ng mg(-1)). Rotenone increased ROS levels 107% (control vs. rotenone; 100%+/-1.35 vs. 207%+/-6.78RFU mg(-1)protein, p<0.001) and significantly increased the accumulation of total Hg (control vs. rotenone=86.5+/-4.14 ng mg(-1) vs. 124+/-3.80 ng mg(-1), p<0.001). There was no detectable demethylation in the control or BSO treated group, however, the rotenone treatment significantly increased the demethylation (control vs. rotenone=-1.86+/-5.57% vs. 16.3+/-2.68%, p<0.05). For the first time, we have demonstrated in an in vitro primary astrocyte culture model that MeHg can be converted to inorganic Hg and demethylation increases with oxidative stress. Our results provide a useful model to study demethylation of Hg in astrocytes and to explore potential ways to protect against Hg toxicity.     

Cancer risk from gaseous carbonyl compounds in indoor environment generated from household coal combustion in Xuanwei,China

Airborne carbonyls were characterized from emitted indoor coal combustion. Samples were collected in Xuanwei (Yunnan Province), a region in China with a high rate of lung cancer. Eleven of 19 types of samples (58%) demonstrated formaldehyde concentrations higher than the World Health Organization exposure limit (a 30-min average of 100 μg m^?3). Different positive significant correlations between glyoxal/methylglyoxal and formaldehyde/acetaldehyde concentrations were observed, suggesting possible different characteristics in emissions between two pairs of carbonyl compounds. A sample in the highest inhalation risk shows 29.2 times higher risk than the lowest sample, suggesting different coal sampling locations could contribute to the variation of inhalation risk. Inhabitants in Xuanwei also tend to spend more time cooking and more days per year indoors than the national average. The calculated cancer risk ranged from 2.2–63 × 10^?5, which shows 13 types of samples at high-risk level. Cumulative effect in combination with different carbonyls could have contributed to the additive actual inhalation cancer risk. There is a need to explicitly address the health effects of environmentally relevant doses, considering life-long exposure in indoor dwellings.     

Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.     

Benefits of Bt cotton counterbalanced by secondary pests? Perceptions of ecological change in China

In the past, scientific research has predicted a decrease in the effectiveness of Bt cotton due to the rise of secondary and other sucking pests. It is suspected that once the primary pest is brought under control, secondary pests have a chance to emerge due to the lower pesticide applications in Bt cotton cultivars. Studies on this phenomenon are scarce. This article furnishes empirical evidence that farmers in China perceive a substantial increase in secondary pests after the introduction of Bt cotton. The research is based on a survey of 1,000 randomly selected farm households in five provinces in China. We found that the reduction in pesticide use in Bt cotton cultivars is significantly lower than that reported in research elsewhere. This is consistent with the hypothesis suggested by recent studies that more pesticide sprayings are needed over time to control emerging secondary pests, such as aphids, spider mites, and lygus bugs. Apart from farmers?? perceptions of secondary pests, we also assessed their basic knowledge of Bt cotton and their perceptions of Bt cotton in terms of its strengths and shortcomings (e.g., effectiveness, productivity, price, and pesticide use) in comparison with non-transgenic cotton.     

Development of a Local-Scale Spatially Refined Multimedia Fate Model (LSRMFM) for Urban-Scale Risk Assessment: Model Formulation, GIS-Based Preprocessing, and Case Study

A local-scale spatially refined multimedia fate model (LSRMFM) was developed to evaluate in detail the multimedia transport of organic compounds at a spatial level. The model was derived using a combination of an advection?Cdispersion?Creaction partial differential equation, a steady-state multimedia fugacity model, and a geographical information system. The model was applied to predicting four major volatile organic compounds that are produced as emissions (benzene, toluene, xylene, and styrene) in an urban and industrial area (the 50?×?50-km area was divided into 0.5?×?0.5-km segments) in Korea. To test the accuracy of the model, the LSRMFM was used to predict the extent of dispersion and the data compared with actual measured concentrations and the results of a generic multimedia fate model (GMFM). The results indicated that the method developed herein is appropriate for predicting long-term multimedia pollution. However, the comparison study also illustrated that the developed model has some limitations (e.g., steady-state assumption) in terms of explaining all the observed concentrations, and additional verification and study (e.g., validation using a large observed data set, integration with a more accurate runoff model) would be desirable. In comparing LSRMFM and GMFM, discrepancies between the LSRMFM and GMFM outputs were found, as the result of geographical effects, even though the environmental parameters were identical. The geographical variation for LSRMFM output indicated the existence of considerable local human and ecological risks, whereas the GMFM output indicated less average risk. These results demonstrate that the model has the potential for improving the management of pollutant levels under these refined spatial conditions.     

Using of “pseudo-second-order model” in adsorption

A research paper's contribution exists not only in its originality and creativity but also in its continuity and development for research that follows. However, the author easily ignores it. Citation error and quotation error occurred very frequently in a scientific paper. Numerous researchers use secondary references without knowing the original idea from authors. Sulaymon et al. (Environ Sci Pollut Res 20:3011–3023, 2013) and Spiridon et al. (Environ Sci Pollut Res 20:6367–6381, 2013) presented wrong pseudo-second-order models in Environmental Science and Pollution Research, vol. 20. This comment pointed the errors of the kinetic models and offered information for citing original idea of pseudo-second-order kinetic expression. In order to stop the proliferation of the mistake, it is suggested to cite the original paper for the kinetic model which provided greater accuracy and more details about the kinetic expression.     

Characterization of the monthly variation in (1 → 3)-β-d-glucan concentrations in university laboratories

We characterize the monthly variation in (1 → 3)-β-d-glucan concentration measured over the course of 1 year, and we evaluate the characteristics of size selection using a two-stage cyclone sampler. The (1 → 3)-β-d-glucan concentrations were measured in four bio-related laboratories. A total of 156 samples were collected using a new two-stage cyclone sampler. Analysis of (1 → 3)-β-d-glucan was performed using the kinetic Limulus amebocyte lysate assay. The study showed that airborne (1 → 3)-β-d-glucan concentrations were significantly higher in laboratory D (mean ± SD 1,105?±?1,893 pg/m³) and in the spring (5,458 pg/m³). The highest concentration of (1 → 3)-β-d-glucan occurred in the spring, particularly in May.     

The implementation of a measurement system for brushless DC motor parameters

Most of the energy conversion in industrial devices and equipment is completed by the motor. The acquirement of motor parameters becomes very important for designing the motor drives. The aim of this paper is to design and implement a motor measurement system. Through the processing of an Advanced RISC Machines (ARM) microcontroller, the various parameters of motors such as input voltage, input current, input power, motor speed, and motor torque can be obtained. Consequently, the torque constant, load torque, viscous friction, and the inertia of the motor are calculated and achieved. The motor parameters can be commanded and displayed in the designed human interface of a PC via USB communication. The hardware system designed in this system includes an ARM microcontroller, an inverter, a voltage sensor, a current sensor, a torque sensor, and power supply. The software programming is developed under the Visual Studio 2012 environment development platform using the C language. Finally, the prototype of the motor measurement system is completed and verified. The experimental results for the motor parameters and torque/speed characteristic are demonstrated and show the feasibility of the complete designed system.