Modelling of Materials Policies

This paper discusses the REAP1 model and its application for the analysis of CO₂ reduction and waste management policies for Japanese petrochemicals. The pros and cons of this modelling approach in comparison to other tools is elaborated. This is followed by a discussion of the model code and the modelling results. The results show that CO₂ policies can have significant impacts on waste flows and waste policies can have significant CO₂ benefits. As a consequence both effects must be considered in policy assessment. Pricing instruments are recommended instead of regulations because of the complex physical relations in the materials life cycle that extend beyond sector boundaries. A taxation approach is superior to a subsidy approach because rebound effects can be avoided.     

Current status and research on E-waste issues in Asia

Rapid economic growth in Asia and the increasing transboundary movement of secondary resources will increasingly require both 3R endeavors (reduce, reuse, recycle) in each country and appropriate control of international material cycles. Recently, managing electrical and electronic waste (E-waste) has become an important target for domestic and international material cycles from the viewpoints of environmental preservation and resource utilization efficiency. To understand the current status of E-waste issues in the context of international material cycles and to discuss the future tasks related to achieving 3R in the region, we organized the National Institute for Environmental Studies (NIES) E-waste Workshop in December 2004. This article reviews past studies on E-waste and briefly describes the topics presented and discussions held at the workshop. The topics at the workshop included E-waste generation, recycling systems, international trade, and environmental impacts. In addition, we discussed various issues such as terminology, current environmental concerns, and possible solutions. Transboundary shipments of E-waste should be conducted taking into consideration the concept of sustainable development. The direction of future research and possible collaborations are also discussed.     

α1-Microglobulin levels and correlation with cadmium and other metals in urine of non-smoking women among general populations in Japan

The present study was initiated to examine urinary α₁-microglobulin (α₁-MG-U) levels among non-smoking women in the general population in Japan. A previously established database on spot urine samples from adult woman volunteers in 10 non-polluted areas all over Japan was re-examined. The data examined were on α₁-MG-U, cadmium, calcium, magnesium and zinc levels in urine (Cd-U, Ca-U, Mg-U and Zn-U, respectively), urinary creatinine (CR or cr), urine specific gravity (SG or sg), smoking habits and age. Thus, 8975 never-smoking women were selected for statistical analyses. The grand geometric mean (GM) for α₁-MG-U among the population was 2.1?mg/L or 2.5?mg/g?cr, depending on the correction for urine density. It was 1.1?µg/L or 1.3?µg/g?cr for GM Cd-U. The inter-area difference in α₁-MG-U was <1.5?mg/g?cr or <0.7?mg/L; the area with the highest or lowest GM Cd-U was not always highest or lowest in GM α₁-MG-U. The correlation coefficient (0.53) between log?Cd-U and log?α₁-MG-U (both without urine density correction) became substantially smaller when the analyte levels were corrected for CR (0.25) or SG (0.26). In multiple regression analysis, the power of influence of the five independent variables (log?Cd-U, Ca-U, Mg-U, Zn-U and age) in combination was small (R ²?≦?0.13). In contrast, logistic regression analysis suggested that α₁-MG-U might be elevated as a function of an increase in Cd-U, depending on the cut-off values. Discussion was made on dose (Cd-U_cr) and response (α₁-MG-U_cr) relationship based on information available in literatures to show that the increment in α₁-MG-U_cr per Cd-U_cr was much greater when Cd-U_cr was large, e.g., in excess of 10?µg/g?cr.     

Material cycles in Asia: especially the recycling loop between Japan and China

In this article, we clarify the current status of Japanese exports and Chinese imports of secondary resources. A total of around 10 million metric tons (t) of secondary resources are exported annually from Japan to China, Hong Kong, and Korea. Hong Kong plays the role of a transshipment point, especially regarding the trade in plastic waste, and China imports much from the USA and Japan, often through Hong Kong. The secondary resources exported from Japan include both byproducts from manufacturing processes and end-of-life products or materials. The great demand in China, and the difference in prices between countries, drive this transboundary shipment, although Japan has enacted various recycling laws that were implicitly intended to promote domestic recycling. In China, the imported secondary resources are recycled, usually by means of primitive and low-cost hand labor. The greatest concern is whether there are still improper (illegal or polluting) recycling activities in China. International material cycles should prevent environmental pollution and ensure efficient resource utilization. To that end, the following measures are needed: cooperative control of the trade of secondary resources between countries, the alignment of domestic laws with the regulations in other countries based on the actual trade activities, and the realization of sound practices for global resources management.     

Material flow indicators to measure progress toward a sound material-cycle society

This article reviews recent progress in material flow analysis and its use in providing resource productivity indicators and is based on developments in Japanese policy toward a sound material-cycle society and in international forums such as within the Organisation for Economic Development and Cooperation, covering both institutional and methodological issues. Indicators derived from economy-wide material flow accounts such as direct material inputs are useful to demonstrate the absolute size of a physical economy and to reinforce the need to both reduce consumption of natural resources and limit waste generation. Interpretation of material flows as resources and potential environmental impacts is discussed, and linkages between the size of material flows and specific environmental impacts and damage must be further elaborated for use in environmental policy. Lessons learned from the practical use of resource productivity indicators are also discussed. Additional indicators are needed that can be used to evaluate the performance of microeconomic contributors. The need for an integrated approach that links upstream resource issues and downstream waste issues through the 3Rs concept or the circular economy/society concept is attracting increasing attention. Consequently, the accumulation of reliable scientific knowledge and data in this field in a fully international context is essential.     

Optimization of compost fermentation of glycerol by-product discharged from biodiesel fuel production process

Development of a cheap system for reuse of glycerol by-product discharged from the biodiesel fuel (BDF) production process is needed in parallel with development of a low-cost BDF production system. In this article, optimization of compost fermentation of glycerol by-product was studied. The type and amount of additive nitrogen source was studied, and good utilization of glycerol was observed when 0.5 g of urea was added to a mixture of 625 g dry sawdust, 25 g of microbial seed, and 50 g of glycerol by-product. To achieve efficient compost fermentation, repeated batch fermentation was applied and five batch cultures were repeated. Although the pH level and nitrogen and water contents were maintained at suitable levels for microbial growth, the glycerol consumption rate gradually decreased with accumulation of oily compounds in the compost. Finally, a material cost evaluation of the compost fermentation proposed in this study was performed. The total material cost decreased to ￥0.57 /l of BDF when employing an existing compost system for the fermentation process, although sawdust used for mushroom cultivation was used in this study at the very high cost of ￥123 /kg dry sawdust. However, the cost of disposal of the glycerol byproduct as an industrial waste was ￥5.2 /l of BDF produced; therefore, there might be an economical advantage to compost fermentation of glycerol by-product from BDF production.     

Groundwater Modeling in Agricultural Watershed under Different Recharge and Discharge Scenarios for Quaternary Aquifer Eastern Nile Delta,Egypt

Different scenarios of recharge and discharge were assessed for sustainable management of groundwater in Quaternary aquifer east of Nile Delta. MODFLOW was utilized to investigate the effect of land use change and damming construction in the upstream of the Nile River on the current and short-term groundwater management strategies. The interpretive transient simulation was performed between 2004 and 2016 after steady-state calibration in 2004, and transient state from 2004 to 2013 with different irrigation recharges associated with land use change in this period. Sensitivity analysis was performed for hydraulic conductivities, recharge, and conductance parameters. The predictive transient simulation was run till 2023 under three scenarios of increasing pumping rates by 15, 30, and 50% for agriculture expansion and specified head reduction of Port Said Canal by 0.2, 0.4, and 0.6 m associated with the reduction of Nile water levels after Grand Ethiopian Residence Dam, GERD operation in 2017. Results from the in- and out-flow budgets showed that groundwater aquifer is stable at the current rate of pumping till 2023. Groundwater heads decreased by 0.2 and 0.42 m in the southern section, and a slight increase in the northern part was noticed for the first and second scenarios, respectively. When additional pumping stress is applied (50% increase), groundwater head dropped by 0.66 m, and the storage is no longer able to maintain the aquifer capacity after 2020 (worst-case scenario).     

Recycling of biodiesel fuel wastewater for use as a liquid fertilizer for hydroponics

Wastewater is discharged during washing processes in the production of biodiesel fuel (BDF) using alkaline catalysts. It can be recycled as a liquid fertilizer for hydroponics by adding essential components for plant growth. The effects of the liquid fertilizer on plant growth were investigated. Liquid fertilizer containing a smaller amount of the BDF wastewater had a similar effect on plant growth as the standard nutrient solutions. This result reveals that BDF wastewater can be recycled for use as a liquid fertilizer for hydroponics. However, fertilizer with a larger amount of the BDF wastewater showed poor and varied plant growth due to the growth of microorganisms in the contaminated wastewater. Hence, when BDF wastewater becomes contaminated during storage, sterilization is necessary to recycle it as a liquid fertilizer. Moreover, contamination during storage should be avoided for successful recycling.     

Economic growth and trends of municipal waste treatment options in Asian countries

Many developing Asian countries are rapidly expanding their economies. Economic growth affects waste management policy development. Statistical analyses applied to Japan, Korea, and China indicate a positive correlation between gross domestic product (GDP) per capita and incineration rate. However, they show a negative correlation between GDP per capita and composting rate in Japan and China, and a positive correlation in Korea. Historical prefectural/provincial data indicate that in Japan and in China, although the incineration rate in a specific year differs due to regional conditions, the rate has increased in parallel with economic growth. An analytic hierarchy process was conducted with experts and government officials from Southeast and East Asian countries. The results statistically confirm the trend correlated with economic growth, which was suggested by previous studies and mentioned by experts based on their experience. For instance, social acceptance was important in upper middle-income countries (USD 4,036–12,475). These results support the possibility that economic growth affects the selection of waste treatment options.