Occurrence of PAH in the seasonal snowpack of the Eastern Italian Alps

PAH concentrations have been determined in 47 seasonal snowpack samples collected in the Valbelluna valley and in the Bellunesi Dolomites National Park, in the Italian North-Eastern Alps, during the winter of 2005. The ΣPAH concentration in high-altitude alpine sites (above 1700 m) was 32 ± 20 ng/kg while in valley bottom urban areas it was 165 ± 54 ng/kg with maximum values of 290 ng/kg. The GIS mapping technique was employed to produce a PAH spatial distribution. The urbanized Valbelluna valley, and in particular the SW part, had the highest accumulation of all PAH, with values an order of magnitude more than those in rural and alpine areas. This behaviour is consistent with urban air quality data, and is due to geo-morphological and meteorological factors such as the deeper shape of the valley at the position of the town of Feltre and the low altitude of the boundary layer during the winter season.     

Effect of modified Fenton treatment on the thermal behavior of contaminated harbor sediments

This study presents the results of experimental Fenton-like treatments conducted on marine sediment slurries (2g sediment vs. 20 ml liquid). The sediment was collected in a harbor situated in a high density industrial area, characterized by a great hydrocarbon C>12 and PAHs contamination. The investigated parameters were: the H(2)O(2) dose, the reagent's pH and the effect of a phosphate salt and ferrous iron addition. To evaluate sediment's characteristics COD, particle size, thermogravimetric and differential thermal analyses were performed under N(2) and O(2) atmosphere while dissolved organic carbon and COD analyses were performed on the filtrate. Results indicate that the treatment was able to change the organic matter to a less hydrophobic state, to destroy part of the organic carbon (up to 78% decrease of the 200-400 degrees C labile organic matter), to lower the COD of the sediment (60% COD removal maximum) and to increase the cumulated distribution undersize. In addition as the treated sediment showed easier-to-handle characteristics, reduced caking and lower aggregation capacity, the modified Fenton treatment could also be considered a pre-treatment of a successive thermal treatment.     

The AVI project: A bibliographical and archive inventory of landslides and floods in Italy

The AVI project was commissioned by the Minister of Civil Protection to the National Group for Prevention of Hydrogeologic Hazards to complete an inventory of areas historically affected by landslides and floods in Italy. More than 300 people, divided into 15 research teams and two support groups, worked for one year on the project. Twenty-two journals were systematically searched for the period 1918–1990, 350,000 newspaper issues were screened, and 39,953 articles were collected. About 150 experts on mass movement and floods were interviewed and 1482 published and unpublished technical and scientific reports were reviewed. The results of the AVI project, in spite of the limitations, represent the most comprehensive archiving of mass movement and floods ever prepared in Italy. The type and quality of the information collected and the methodologies and techniques used to make the inventory are discussed. Possible applications and future developments are also presented.     

Electroassisted methods for waste destruction: silver(II) and peroxydisulfate reagents in the electrochemically mediated oxidation of polyaromatic sulfonates

The electrochemical oxidation is a promising process for organic pollutants which are recalcitrant to biological degradation. The anodic oxidation of 1,5-naphthalenedisulfonic acid, hereafter NDS, was evaluated at a Pt anode using in situ generated Ag(II) cation or peroxydisulfate [S2O(8)(2-)] anion as mediators. Kinetics of the direct chemical oxidation of NDS in the presence of Na2S2O8, and the identification of some oxidation intermediates are also reported. An analysis of the results shows that Ag(II) is characterized by a high-reaction rates, while [S2O(8)(2-)] performs the oxidation of NDS in a complete way.     

Experimental in situ chemical peroxidation of atrazine in contaminated soil

Lab-scale experiments of in situ chemical oxidation (ISCO), were performed on soil contaminated with 100 mg kg(-1) of atrazine (CIET). The oxidant used was hydrogen peroxide catalysed by naturally occurring minerals or by soluble Fe(II) sulphate, added in aqueous solution. The oxidation conditions were: CIET:H2O2=1:1100, 2 PV or 3 PV reaction volume, Fe(II):H2O2=0, 1:22, 1:11. Stabilized (with KH2PO4 at a concentration of 16 g l(-1)) or non-stabilized hydrogen peroxide was used. The pH of the reagents was adjusted to pH=1 with sulphuric acid, or was not altered. Results showed that the addition of soluble Fe(II) increased the temperature of the soil slurry and the use of stabilized hydrogen peroxide resulted in a lower heat generation. The treatment reduced the COD of the soil of about 40%, pH was lowered and natural organic matter became less hydrophobic. The highest atrazine conversion (89%) was obtained in the conditions: 3 PV, Fe(II):H2O2=1:11 with stabilized hydrogen peroxide added in two steps. The stabilizer only increased H2O2 life-time significantly when soluble Fe(II) was added. Results indicate as preferential degradation pathway of atrazine in soil dechlorination instead of dealkylation.     

Influence of large-spectrum environmental contamination on the micro-meiobenthic assemblages in harbour sediments of the ligurian sea (W Mediterranean)

The concentration of a large spectrum of environmental contaminants (PCBs, PAHs, pesticides and metals) was assessed in surface sediments of two Ligurian harbours (Sanremo and Alassio, NW Mediterranean Sea, Italy) and their relative impact on micro-meiobenthic assemblages was analysed. Concentration, distribution and relative importance of the different contaminants varied considerably between harbours in relation to the different anthropic activities and contamination sources. Results from Principal Component Analysis indicated that high levels of contaminants were typically correlated with low micro-meiobenthic abundance in the sediment. Heavy metals and the organic enrichment were the main factors affecting the distribution and abundance of the bacterial and meiofaunal assemblages in Alassio harbour, whereas hydrocarbons and pesticides played a major role in Sanremo sediments. Neither the bacteria density nor the meiofauna abundance were dependent on sediment grain size, suggesting that micro-meiobenthic parameters may be under the influence of other variables. Our results suggest that high concentrations of contaminants independently from their source or typology are responsible for the impact observed on micro-meiobenthic assemblages in these harbours.     

Benthic Response to Mucilaginous Aggregates in the Northern Adriatic Sea: Biochemical Indicators of Eutrophication

Abstract

In summer 1997, gelatinous aggregates appeared in the Adriatic Sea, covering large areas of the northern basin. This study deals with the comparison between the biochemical composition of the sedimentary organic matter in summer, 1996 (when no aggregates appeared), and in summer, 1997 (during the appearance of aggregates). the biochemical composition of organic matter in surface sediments (determined in terms of proteins, carbohydrates, lipids, phytopigments and nucleic acids) has been investigated in two areas along the coast of the NW-Adriatic Sea in order to characterize benthic processes during aggregate deposition on the sea floor. During mucilage accumulation, a significant increase of biochemical compounds was observed, and chlorophyll-a and carbohydrate concentrations doubled their concentrations. in contrast, protein concentrations decreased, so that overall biopolymeric carbon content (expressed as the sum of lipid, protein and carbohydrate carbon equivalents) did not display significant differences between sampling periods (1579.3 in June, 1996 1678.8 μgCg^?1 and June, 1997). the protein to carbohydrate ratio decreased from 4.9 in June, 1996 to 1.8 in June, 1997. Mucilage production in June, 1997, modified significantly the biochemical composition of the sedimentary OM, thus affecting the potential availability of OM to benthic consumers. We hypothesise that the production of highly refractory composition of the sedimentary OM during mucilage accumulation might have an important biogeochemical implications.     

Changes in the Biochemical Composition of Tetraselmis Suecia and Isochrysis Galbana During Growth and Decay

The variations of the biochemical composition of Tetraselmis suecica and Isochrysis galbana during growth and decay were determined. the content of chlorophyll a (Chl-a) of the cultures, as expected, slowly degraded into phaeopigments during decay, confirming that chlorophyll measurements do not always provide an accurate estimate of phytoplanktonic biomass and, consequently, may fail if used to measure the food availability of particulate matter for consumers. Measurements of total amounts of proteins, carbohydrates and lipids, related to the nutritional value of particles in terms of caloric content, are shown to provide information on the readily available food for consumers, particularly during the blooms. the protein/carbohydrate, C/N and POC/Chl-a ratios were used to evaluate the differences between these two species during the growth and the decomposition processes. A comparison between experimental and field conditions was undertaken to implement our understanding of the growth and degradation processes of particulate organic matter of phytoplanktonic origin in the sea and its role on natural systems, during and after phytoplankton blooms.     

Pollution historical trends as recorded by sediments at selected sites of the Venice Lagoon

Polychlorinated biphenyls (PCBs), dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and hexaclorobenzene (HCB) were determined in three sediment cores of the Venice Lagoon: I1, from the San Giuliano Canal that is likely the main source of pollutants for the study area; E, representing the lagoon sediment of the zone of Campalto; and M3, typical of a salt marsh environment and mostly subject to atmospheric inputs. Maximum concentrations were found in core I1: 25-1858 ngI-TE kg(-1) (PCDD/Fs), 1.7-13 microg kg(-1) (HCB), and 107-717 microg kg(-1) (PCBs) are surficial and peak values, respectively. The lagoon sediment (E), is much less contaminated: 24-47 ngI-TE kg(-1) for PCDD/Fs, 2.3-3.6 microg kg(-1) for HCB, and 56-203 microg kg(-1) for PCBs, whereas M3 shows the lowest values: 1.6-6.0 ngI-TE kg(-1) for PCDD/Fs, 0.3-0.6 microg kg(-1) for HCB, and 7.1-39 microg kg(-1) for PCBs. In any case, the recent trend is toward a decrease of pollutant concentration. The chronology of cores E and M3 is based on both 210Pb and 137Cs activity-depth profiles. The maximum concentrations of PCDD/Fs, HCB, and PCBs correspond to the years 1949, 1980, and 1968, respectively. The homologue profiles of PCDD/Fs confirm that I1 has been subject to an industrial source while the other sites also recorded significant contributions, changing over time, of octachlorinated dioxin from combustion. A comparison of the pollutant inventories, all normalised to 210Pb inventories, suggests that the atmospheric contribution to the contamination of the area of Campalto is low: the upper limits range from 6% (PCDD/Fs) to 17% (HCB).     

Dioxins and furans formation in pilot incineration tests of sewage sludge spiked with organic chlorine

The factors affecting polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) formation were studied in sewage sludge incineration tests carried out on a demonstrative plant. The plant includes a circulating fluidised bed furnace (FBF) and a rotary kiln furnace (RKF), operating alternatively. During the tests sewage sludge was spiked with chlorinated hydrocarbons and the operating parameters of the afterburning chamber were varied. PCDD/F were sampled in each test before the bag filter, thus collecting the above contaminants before abatement systems. From the tests it appeared that PCDD/F were always produced in more abundance in the tests carried out by FBF than by RKF. The higher PCDD/F concentrations in the tests by FBF were reached when sewage sludge was spiked with a high dosage of a surrogate organic mixture of chlorinated hydrocarbons and when the afterburning chamber was used only as transit equipment with the burner off. The distribution of the different PCDD/F homologues was compared. P5CDFs were generally the prevalent fraction, with very few exceptions for the tests by RKF at high temperature of the afterburning chamber. As for FBF tests, it was found that the PCDD/F homologue profile depends on the afterburning chamber temperature.