Leachate injection using vertical wells in bioreactor landfills

Leachate recirculation or liquid injection in municipal solid waste landfills offers economic and environmental benefits. The key objective of this study was to carry out numerical evaluation of key design variables for leachate recirculation system consisting of vertical wells. In order to achieve the objective, numerical modeling was carried out using the finite-element model HYDRUS-2D. The following design parameters were evaluated by simulating liquid pressure head on the liner and the wetted width of the waste under steady-state flow conditions: (1) hydraulic conductivities of the waste and vertical well backfill; (2) liquid injection rate and dosing frequency; (3) well diameter, screen height and screen depth; and (4) hydraulic conductivity of the leachate collection system, slope of the leachate collection system and spacing of the leachate collection pipes. The key findings of this study are as follows. The well diameter, hydraulic conductivity of the well drainage pack, and screen height and screen depth of the well have very little effect on the wetted width for a given liquid flux. The wetted width and the injection pressure for a given liquid flux decrease with the increase in the hydraulic conductivity of the waste. The pressure head on the liner increases with the decrease in the vertical distance between the bottom of the well screen and the top of leachate collection system. The liquid injection flux increases with the decrease in hydraulic conductivity of the leachate collection system. Unlike sand (k approximately 10(-4)m/s), pea gravel (k approximately 0.01 m/s) resulted in less than 0.3m pressure head on the liner for all simulations carried out in this study.     

Histological examination of sublethal effects of diazinon on ovary of bluegill,Lepomis macrochirus

The effects of the insecticide, diazinon (an organophosphorous compound), on the ovaries of bluegill (Lepomis macrohirus) were studied. Histological preparations of bluegill ovarian tissue was examined at 24, 48, 72 and 96 h and 1, 2 and 3 weeks following exposure to sublethal doses of diazinon (60 microg/l). The control contained primary follicles with an intact ovigerous lamellae and tunica albuginea. The control also revealed well developed stage IV oocytes with properly distributed provitelline nucleoli. After 24 h of exposure to diazinon, primary follicles began to show adhesion and cytoplasmic retraction in oocyte II occured. Cytoplasmic degeneration and additional adhesion and more retraction were visible at 48 h in oocyte II; 72 h brought forth adhesion, retraction and cytoplamic expulsion from oocyte IV. The number of atretic oocytes increased. Damages to the oocyte IV started to occur after 72 h of exposure. Cytoplasmic retraction and clumping was more visible at 96 h in oocyte IV. Partial destruction of the ovigerous lamellae and vitellogenic membrane occurred after 1 week. Two weeks continued to reveal destruction of follicles. Severe damage of the ovigerous lamellae, increased intrafollicular spaces, vacuolated cytoplasm, extrusion of karyoplasm and necrosis in the cytoplasm were most evident following 3 weeks of exposure. The ovarian wall became frayed and broken. Additionally, a marked increase of atretic follicles, shrinkage, and embedded nucleoli into the surrounding cytoplasm in oocyte II, III and IV were observed at week 3. This study revealed that oocytes at their different stages of maturation get affected differently at various exposure. Based on observations of the ovarian tissue compositional and structural changes following given exposure times, it becomes evident that consistent sublethal doses of diazinon can and will alter microscopic anatomy of the fish ovary.     

Constructed wetland microcosms as sustainable technology for domestic wastewater treatment: an overview

Environmental Science and Pollution Research - Constructed wetland microcosms (CWMs) are artificially designed ecosystem which utilizes both complex and ordinary interactions between supporting...     

PCB exposure and potential future cancer incidence in Slovak children: an assessment from molecular finger printing by Ingenuity Pathway Analysis (IPA®) derived from experimental and epidemiological investigations

The risk of cancer due to PCB exposure in humans is highly debated. In eastern Slovakia, high exposure of the population to organochlorines (especially PCBs) was associated with various disease and disorder pathways, viz., endocrine disruption, metabolic disorder & diabetes, and cancer, thereby disturbing several cellular processes, including protein synthesis, stress response, and apoptosis. We have evaluated a Slovak cohort (45-month children, at lower and higher levels of PCB exposure from the environment) for disease and disorder development to develop early disease cancer biomarkers that could shed new light on possible mechanisms for the genesis of cancers under such chemical exposures, and identify potential avenues for prevention.

Microarray studies of global gene expression were conducted from the 45-month-old children on the Affymetrix platform followed by Ingenuity Pathway Analysis (IPA®) to associate the affected genes with their mechanistic pathways. High-throughput qRT-PCR TaqMan low-density array (TLDA) was performed to further validate the selected genes on the whole blood cells of the most highly exposed children from the study cohort (n = 71).

TP53, MYC, BCL2, and LRP12 differential gene expressions suggested strong relationships between potential future tumor promotion and PCB exposure in Slovak children. The IPA analysis further detected the most important signaling pathways, including molecular mechanism of cancers, prostate cancer signaling, ovarian cancer signaling, P53 signaling, oncostatin M signaling, and their respective functions (viz., prostate cancer, breast cancer, progression of tumor, growth of tumor, and non-Hodgkin’s disease). The results suggest that PCB exposures, even at the early age of these children, may have lifelong consequences for the future development of chronic diseases.

     

Immunotoxic manifestations in rats following inhalative exposure to furfural vapors

Furfural is an industrial compound used as a process intermediate and as a solvent; it poses a potential inhalation hazard in occupational settings. This study was carried out to find furfural-induced immunotoxicity in Wistar rat following inhalative exposure. The weights of thymus and lymph node were found decreased, while the weights of the liver and the adrenal gland were significantly increased following furfural exposure. Delayed-type hypersensitivity response was found decreased in furfural vapors-exposed animals when compared to that of control animals. The phagocytic index of peritoneal and alveolar exudates showed significant decrease and was most prominent (90%) in 30 days-exposed groups. The number of anti-rat anti-sheep red blood cell immunoglobulin M plaque forming cells of spleen got decreased in furfural-exposed groups in comparison to control. Taken together, this study indicates that inhalation of furfural induces immunotoxic manifestations that could lead to severe immunological disorders.     

Impact of heavy metals on bacterial communities from mangrove soils of the Mahanadi Delta (India)

This study aimed to assess soil nutrient status and heavy metal content and their impact on the predominant soil bacterial communities of mangroves of the Mahanadi Delta. Mangrove soil of the Mahanadi Delta is slightly acidic and the levels of soil nutrients such as carbon, nitrogen, phosphorous and potash vary with season and site. The seasonal average concentrations (μg/g) of various heavy metals were in the range: 14 810–63 370 (Fe), 2.8–32.6 (Cu), 13.4–55.7 (Ni), 1.8–7.9 (Cd), 16.6–54.7 (Pb), 24.4–132.5 (Zn) and 13.3–48.2 (Co). Among the different heavy metals analysed, Co, Cu and Cd were above their permissible limits, as prescribed by Indian Standards (Co=17 μg/g, Cu=30 μ g/g, Cd=3–6 μ g/g), indicating pollution in the mangrove soil. A viable plate count revealed the presence of different groups of bacteria in the mangrove soil, i.e. heterotrophs, free-living N₂ fixers, nitrifyers, denitrifyers, phosphate solubilisers, cellulose degraders and sulfur oxidisers. Principal component analysis performed using multivariate statistical methods showed a positive relationship between soil nutrients and microbial load. Whereas metal content such as Cu, Co and Ni showed a negative impact on some of the studied soil bacteria.     

Shoreline shifting and its prediction using remote sensing and GIS techniques: a case study of Sagar Island,West Bengal (India)

The shoreline position is difficult to predict but the trend of erosion or accretion can be determined by geospatial and statistical techniques which may help in reducing the loss of property. The study aims to assess the shoreline changes and prediction in Sagar Island, a delta of the Ganges, situated in West Bengal, India. Shorelines have been delineated by using Tasseled Cap Transformation techniques from the Landsat MSS (1975), Landsat TM (1989, 1991) and Landsat ETM+ (1999, 2002, 2005, 2008, and 2011) images. The uncertainty was calculated for every year for assessing the positional error related to shoreline extraction. Total shoreline change rate/year has also been calculated and the uncertainty of total shoreline change rate was found ±3.20 m/year. In the present study, End Point Rate (EPR) and Linear Regression (LR) methods have been used for shoreline change rate calculation and prediction of shoreline. Long term (1975–2002) and short term (2002–2011) erosion and accretion rates were calculated for the study area. Sagar is the biggest island of the Sundarban region; so, it was divided into three segments in order to analyze the change on a segment basis. It was observed that the most of erosion occurred in the Segment B (south Sagar). The rate of erosion was ?7.91 and ?7.01 m/year for the periods 1975–2002 and 2002–2011 respectively. The mean shoreline change rate was high in Segment B (South Sagar) with values of ?6.46 m/year (1975–2002) but the rate was decreased into ?5.25 m/year during the later period (2002–2011). The study reveals that most of the southern part of Sagar Island is vulnerable to high rate of shoreline erosion.     

Methyl mercury in fish—a case study on various samples collected from Ganges river at West Bengal

This study investigated the presence of total mercury (Hg) and organic mercury levels in the muscle of 19 common fresh water fish species captured from river Ganges, West Bengal, India. The total mercury level found in our study may not cause any toxic effect, but the methyl mercury (MeHg) level in some freshwater fish species was surprisingly very high and toxically unacceptable. The results of mercury analysis in various specimens indicated that some fish muscles tended to accumulate high levels of Hg, and approximately 50–84% of Hg was organic mercury. A strong positive correlation between mercury levels in muscle with food habit and fish length (age) was found. Wallago attu possessed the highest amount of organic mercury in their muscle tissues, and it was 0.93 ± 0.61 μg Hg/g of wet weight. Whereas in small-sized fishes Eutropiichthys murius, Puntius sarana, Cirrhinus mrigala, Mystus vittatus or Mystus gulio, and Tilapia mossambicus, it was below the detection limit. Contamination in Catla catla (0.32 ± 0.11), Anguilla bengalensis bengalensis (0.26 ± 0.07 μg Hg/g), Chitala chitala (0.25 ± 0.18), Rita rita (0.34 ± 0.14), and Ompok pabda (0.26 ± 0.04) was also above the 0.25 μg Hg/g of wet weight, the limit set by the PFA for the maximum level for consumption of fish exposed to MeHg. Though in Labeo rohita (0.12 ± 0.03), Mastacembelus armatus (0.17 ± 0.02), Pangasius pangasius (0.12 ± 0.16), Bagarius bagarius (0.12 ± 0.01), and Clupisoma garua (0.1 ± 0.01), concentration was below the recommended level, in Lates calcarifer (0.23 ± 0.0) and Mystus aor (0.23 ± 0.1), it was threatening. Interestingly, a low concentration of Hg was found in post-monsoon samples.     

Mann–Kendall trend of pollutants,temperature and humidity over an urban station of India with forecast verification using different ARIMA models

The purpose of the present research is to identify the trends in the concentrations of few atmospheric pollutants and meteorological parameters over an urban station Kolkata (22° 32′ N; 88° 20′ E), India, during the period from 2002 to 2011 and subsequently develop models for precise forecast of the concentration of the pollutants and the meteorological parameters over the station Kolkata. The pollutants considered in this study are sulphur dioxide (SO₂), nitrogen dioxide (NO₂), particulates of size 10-μm diameters (PM₁₀), carbon monoxide (CO) and tropospheric ozone (O3). The meteorological parameters considered are the surface temperature and relative humidity. The Mann–Kendall, non-parametric statistical analysis is implemented to observe the trends in the data series of the selected parameters. A time series approach with autoregressive integrated moving average (ARIMA) modelling is used to provide daily forecast of the parameters with precision. ARIMA models of different categories; ARIMA (1, 1, 1), ARIMA (0, 2, 2) and ARIMA (2, 1, 2) are considered and the skill of each model is estimated and compared in forecasting the concentration of the atmospheric pollutants and meteorological parameters. The results of the study reveal that the ARIMA (0, 2, 2) is the best statistical model for forecasting the daily concentration of pollutants as well as the meteorological parameters over Kolkata. The result is validated with the observation of 2012.     

Visible light photocatalytic degradation of microplastic residues with zinc oxide nanorods

Microplastics have recently become a major environmental issue due to their ubiquitous distribution, uncontrolled environmental occurrences, small sizes and long lifetimes. Actual remediation methods include filtration, incineration and advanced oxidation processes such as ozonation, but those methods require high energy or generate unwanted by-products. Here we tested the degradation of fragmented, low-density polyethylene (LDPE) microplastic residues, by visible light-induced heterogeneous photocatalysis activated by zinc oxide nanorods. The reaction was monitored using Fourier-transform infrared spectroscopy, dynamic mechanical analyser and optical imaging. Results show a 30% increase of the carbonyl index of residues, and an increase of brittleness accompanied by a large number of wrinkles, cracks and cavities on the surface. The degree of oxidation was directly proportional to the catalyst surface area. A mechanism for polyethylene degradation is proposed.