Deployment of parabolic trough concentrated solar power plants in North Africa – a case study for Libya

The study addresses the potential of using concentrated solar power plants (CSPs) as a sustainable alternative of clean energy generation in the Mediterranean region and, in particular, in its North Africa shore. This location presents attractive conditions for the installation of CSPs, in particular high solar irradiation, good manpower concentration, and proximity and availability of water resources for condenser cooling. Energetic, exergetic, and economic analyses were conducted taking into consideration a particular type of CSPs - the parabolic trough concentrated solar power plant, which incorporates the most proven technology and it is already used in Southern Europe (Spain). In addition, the study considered the impact of project financing and incentives on the cost of energy. The combination of higher values for performance and potentially lower levelized cost of electricity (LCE) for the North Africa Mediterranean Rim than the South of Spain region can yield a very favorable return for the invested capital. Tripoli compared to Almeria presented superior performance and potentially lower LCE values ($0.18/kWh versus $0.22/kWh). This is significant, even when it is taken into consideration the fact that the plant in Tripoli, despite a relatively modest capacity factor of 34%, has a large gross power output of 173,886 MWhe. In addition, the implementation at the Tripoli location of a plant similar to the Anadsol plant has a slight advantage (2–3%) in terms of overall efficiency.     

Accumulation of metals in the soil of an overland flow wastewater treatment system

Accumulation of Co, Cu, Cr, Mo, Ni, Pb and Zn was evaluated in a soil profile of an overland flow system used for the post-treatment of urban wastewater. A pilot version of the overland flow system received urban wastewater from five up-flow anaerobic filters filled with bamboo (Bambusa tuldoides) rings. The anaerobic effluent was applied as feed over 18 months at rates varying from 7 to 28 L min(-1), to a vegetated slope length covered with Tifton 85 (Cynodon) sp. grass. Soil and plant samples were collected in triplicate from the top to the bottom of the slope. In addition, the soils were sampled at the depths 0-20 and 20-40 cm. The metal concentrations found in the overall system were compared to those obtained in a control area located at the beginning of the slope onto which nothing was applied. A month of monitoring the urban wastewater of Limeira City (S?o Paulo State, Brazil) showed a drastic change in metals concentration due to the irregular discharge of industrial waste. This irregular discharge introduces Cr, Cu, Ni, Pb and Zn into the system used to treat domestic wastewater. The mass balance indicates the accumulation of metals in the soil and the translocation to the plants; also that they could be evapotranspirated, percolated and discharged.     

The greening of brownfields in American cities

The redevelopment of brownfields has become a central component of government efforts to revitalize many US cities. While the focus of these efforts has concentrated on promoting industrial and commercial redevelopment, some cities have started to also consider converting brownfields into parks and open space as part of a more comprehensive renewal strategy. Based on a survey of 20 case studies, this paper identifies and discusses: (1) the primary issues involved in brownfield greening projects; (2) the benefits of such projects; and (3) the specific planning processes involved. The overall conclusion drawn from the survey is that numerous renewal‐oriented benefits can ensue from greening projects, if there is extensive stakeholder commitment devoted to deal with its financial and development‐oriented challenges.     

Barriers to Renewable Energy Development on Brownfields

Brownfields that are reused for the generation of renewable energy are called brightfields. This rapidly emerging idea advocates the combination sustainable site reuse and the generation of electricity from renewables. While programmes like the RE-Powering America's Land Initiative herald its benefits, academia knows but little of its barriers and challenges. This study aims to examine the technical/environmental, regulator/financial/institutional, and social barriers to this type of development, along with measures that may address them. The barriers and measures were predominately identified via a qualitative and quantitative survey sent to brightfield developers (experts), along with a review of case studies and the emerging brightfield literature. The study found that environmental/technical barriers only differ from ‘conventional’ renewable energy projects (e.g. on Greenfields) in the event of site contamination. The latter then is what makes brightfields unique and is the source for a myriad of challenges concerning risk and liability, which cause financial problems and investment hesitance. However, evidence conjectures that there is less contextual public opposition to brightfields compared to conventional renewable energy.     

Risk assessment of trihalomethanes from tap water in Fortaleza, Brazil

The cancer risks (CR) by oral ingestion, dermal absorption, and inhalation exposure of trihalomethanes (THM) from tap water of ten districts in Fortaleza, Brazil were estimated. The mean levels of THM compounds were obtained in Fortaleza tap water as follow: 63.9 microg L(-1) for chloroform (CHCl(3)), 40.0 microg L(-1) for bromodichloromethane (CHBrCl(2)), and 15.6 microg L(-1) for dibromochloromethane (CHBr(2)Cl). Bromoform (CHBr(3)) was not detected. The mean CR for THMs in tap water is 3.96 x 10(-4). The results indicate that Fortaleza residents have a higher CR by inhalation than dermal absorption and oral ingestion. The CR for CHCl(3) contributes with 68% as compared with the total CR, followed by CHBrCl(2) (21%), and CHBr(2)Cl (11%). The hazard index (HI) is about ten times lower than unity, not indicating non-cancer effects.     

In situ assays with tropical cladocerans to evaluate edge-of-field pesticide runoff toxicity

Tropical regions’ economy is usually based on agriculture, which involves an intensive use, and even frequent overuse, of pesticides. Nevertheless, not much research has been done on the impact of pesticides on tropical aquatic ecosystems, which are often contaminated by runoff-related pesticide inputs due to unpredictable and torrential rainfalls. This study aimed to: (i) adapt and evaluate a short-term sublethal in situ assay using post-exposure feeding as an endpoint, to the tropical cladoceran species Diaphanosoma brachyurum (collected at the Pedra do Cavalo dam in the Paraguaçu River basin, Bahia, Brazil), and, (ii) assess the role of the standard species Daphnia magna as an adequate laboratory surrogate. Lethal and sublethal (post-exposure feeding) responses were assessed for the two species. To evaluate these responses under environmentally realistic exposure conditions, a runoff event was simulated in an agricultural area previously contaminated with different deltamethrin concentrations. The resultant runoff water was used to set up microcosms with different dilutions, simulating the entrance of runoff water in an adjacent lentic system. An in situ assay with D. brachyurum was performed inside the microcosms, allowing to discriminate the effects due to deltamethrin from those due to other potential stressors associated with the experimental design (e.g. organism handling, load of suspended particles, microcosm design). Water samples were collected from microcosms to conduct a laboratory assay with D. magna. The in situ methodologies revealed to be suitable to conduct assays with D. brachyurum under tropical conditions, since all exposed organisms were successfully retrieved from the chambers. Furthermore, none of the potential stressors associated with the experimental design influenced the daphnids’ performance. The tropical cladoceran species, exposed under more realistic conditions, revealed to be more sensitive than the laboratory standard species: lethal effects were only observed for D. brachyurum and sublethal effects were noticed at a lower deltamethrin concentration for this species than for D. magna.     

Foraminiferal biotopes and their distribution control in Ria de Aveiro (Portugal): a multiproxy approach

Ria de Aveiro, which is located in the centre of Portugal (40° 38′ N, 8° 45′ W), is a well-mixed and complex coastal lagoon that is separated from the sea by a sandy barrier and connects with the Atlantic through an artificial inlet. Tidal currents are the main factor controlling the lagoon’s hydrodynamics and, to a great extent, the sedimentary dynamic. The inner lagoonal zones receive input from several rivers and experience the pressure caused by the accumulation of organic matter and pollutants (namely, trace metals) from diverse anthropic activities. This paper is the first piece of work aiming to recognize, characterize and explain the main benthic foraminiferal biotopes in Ria de Aveiro. To provide a broad overview of this kind of setting, our results are compared to those of previous published studies conducted in similar transitional environments. The research is based on an investigation of 225 sites spread throughout this ecosystem. Utilizing a statistical approach, this study analyses the details of dead benthic foraminiferal assemblages composed of 260 taxa, the texture and composition (mineralogical and geochemical) of the sediment and physicochemical data. On the basis of the results of R-mode and Q-mode cluster analyses, several different biotopes can be defined as marsh biotope/near-marsh biotope; marginal urban/marginal urban mixing biotope; inner-outer lagoon biotope or enclosed lagoon; outer lagoon biotope, mixed sub-biotope; and outer lagoon, marine sub-biotope. These biotopes are related to foraminifera assemblages and substrate type and are influenced by local currents, water depth, chemical and physicochemical conditions, river or oceanic proximity, and anthropogenic impact, as evidenced by the mapping of the six factor loadings of the principal component analysis conducted herein. Based on a similar methodology of analysis as that applied in previous studies in the Lagoon of Venice, comparable biotypes were identified in Lagoon of Aveiro.     

Rate of occurrence of failures based on a nonhomogeneous Poisson process: an ozone analyzer case study

Atmospheric pollutant monitoring constitutes a primordial activity in public policies concerning air quality. In São Paulo State, Brazil, the São Paulo State Environment Company (CETESB) maintains an automatic network which continuously monitors CO, SO₂, NO _x , O₃, and particulate matter concentrations in the air. The monitoring process accuracy is a fundamental condition for the actions to be taken by CETESB. As one of the support systems, a preventive maintenance program for the different analyzers used is part of the data quality strategy. Knowledge of the behavior of analyzer failure times could help optimize the program. To achieve this goal, the failure times of an ozone analyzer—considered a repairable system—were modeled by means of the nonhomogeneous Poisson process. The rate of occurrence of failures (ROCOF) was estimated for the intervals 0–70,800 h and 0–88,320 h, in which six and seven failures were observed, respectively. The results showed that the ROCOF estimate is influenced by the choice of the observation period, t ₀?=?70,800 h and t ₇?=?88,320 h in the cases analyzed. Identification of preventive maintenance actions, mainly when parts replacement occurs in the last interval of observation, is highlighted, justifying the alteration in the behavior of the inter-arrival times. The performance of a follow-up on each analyzer is recommended in order to record the impact of the performed preventive maintenance program on the enhancement of its useful life.     

Discrete-choice experiments valuing local environmental impacts of renewables: two approaches to a case study in Portugal

Despite the often mentioned environmental benefits associated with transition from fossil fuels to renewable energy sources, their use for electricity production has non-negligible negative environmental impacts. The most commonly mentioned in surveys concern different types of landscape impacts, impacts on the fauna and flora, and noise. These impacts differ by size and location of plants, and by source of energy, rendering the policy decision complex. In addition, there are other welfare issues to take into consideration, as positive and negative environmental impacts are not evenly distributed among population groups. This paper proposes to compare the welfare impacts of renewable energy sources controlling for the type of renewable as well as the specific environmental impact by source. To this end, two discrete-choice experiments are designed and applied to a national sample of the Portuguese population. In one case, only individual negative impacts of renewables are used, and in another case, the negative impacts interact with a specific source. Results show the robustness of discrete-choice experiments as a method to estimate the welfare change induced by the impacts of renewable energy sources. Overall, respondents are willing to pay to reduce the environmental impacts, thus making compensation for local impacts feasible. Moreover, the estimations reveal that respondents are significantly sensitive to the detrimental environmental effects of specific renewable energy sources, being willing to pay more to use these sources of energy relative to others.