Evaluation of Water Quality in the Chillán River (Central Chile) Using Physicochemical Parameters and a Modified Water Quality Index

The Chillán River in Central Chile plays a fundamental role in local society, as a source of irrigation and drinking water, and as a sink for urban wastewater. In order to characterize the spatial and temporal variability of surface water quality in the watershed, a Water Quality Index (WQI) was calculated from nine physicochemical parameters, periodically measured at 18 sampling sites (January–November 2000). The results indicated a good water quality in the upper and middle parts of the watershed. Downstream of the City of Chillán, water quality conditions were critical during the dry season, mainly due to the effects of the urban wastewater discharge. On the basis of the results from a Principal Component Analysis (PCA), modifications were introduced into the original WQI to reduce the costs associated with its implementation. WQI_DIR2 and WQI_DIR, which are both based on a laboratory analysis (Chemical Oxygen Demand) and three (pH, temperature and conductivity), respectively, four field measurements (pH, temperature, conductivity and Dissolved Oxygen), adequately reproduce the most important spatial and temporal variations observed with the original index. They are proposed as useful tools for monitoring global water quality trends in this and other, similar agricultural watersheds in the Chilean Central Valley. Possibilities and limitations for the application of the used methodology to watersheds in other parts of the world are discussed.     

Prenatal diagnosis of neurofibromatosis type 1: From flanking rflps to intragenic microsatellite markers

Even though the neurofibromatosis type 1 (NF1) gene was cloned more than 3 years ago, the process of identifying mutations has not been fruitful, and genetic counselling is mainly based on the use of linked markers. Since 1990, we have analysed 130 NF1 families and have performed six prenatal diagnoses. In each case, genetic counselling has relied on linked markers and informativity was achieved in all of them. The use of intragenic microsatellite polymorphisms (IVS27AAAT2.1, IVS27AC28.4, IVS27AC33.1, and IVS38GT53.0) has increased the informativeness in our series of NF1 families to an average of 90 per cent, providing accurate diagnosis and confirmation of the disease status.     

Recent development in antimicrobial activity of biopolymer-inorganic nanoparticle composites with water disinfection potential: a comprehensive review

Environmental Science and Pollution Research - Nowadays, water-borne diseases including hepatitis remain the critical health challenge due to the inadequate supply of potable and safe water for...     

PVD coated mill rolls for cold rolling of stainless steel strips—Tribological and mechanical laboratory tests

The cost of rolling is determined in particular by productivity and lifetime of rolls before regrinding. Adhesive wear of the sheet gives rise to transfer on the roll surface. Its occurrence depends on rolling conditions and is one of the determining factors of the maximal reduction for a given rolling speed. Abrasive wear of the roll is the second factor for roll lifetime. Both phenomena are strongly related to tribological and mechanical characteristics of the surface layer of rolls. Stainless steel is known for its high adhesiveness. Coatings with good tribological properties could help extend the roll service. In this paper, the potential of different PVD coatings (CrN, TiN and TiBN) is explored. The impact of these coatings on influential phenomena during rolling is analyzed thanks to well-adapted tribological and mechanical laboratory tests. The results show that TiN has a good potential in cold rolling of stainless steel strips.     

Atmospheric composition change research: Time to go post-normal?

For more than two decades a number of frameworks for scientific knowledge production are being proposed by science and technology researchers. They all advocate an extended involvement of non-specialists, in particular when it comes to knowledge production applicable to practical societal problems. We look to what extent these new frameworks have taken ground within a particular research community: the ACCENT Network of Excellence which coordinates European atmospheric chemistry and physics research applicable to air pollution and climate change. We did so by stimulating a debate through a “blog”, a survey and in-depth interviews with ACCENT scientists about the interaction between science, policy making and civil society, to which a great deal of ACCENT member contributed in writing or verbally. Most of them had interactions with policy makers and/or the general public, and they generally believe that interactions with spheres other than the scientific are needed. While such interactions give personal insight and satisfaction, they seem to have little impact on the goals and the practice of the scientific work itself. Extended frameworks of science production that go beyond the disciplinary mode seem to emerge at the level of individual scientists, yet they still need to find their way to the level of scientific project management. In this paper we discuss the justifications and barriers to implement a higher degree of extended knowledge integration in applied science projects such as ACCENT. It is felt that the community of atmospheric chemists and physicists is mature for such an implementation and recommendations are given to help and make this happen.     

Mesophilic and thermophilic anaerobic biodegradability of water hyacinth pre-treated at 80 °C

Water hyacinth (Eichornia crassipes) is a fast growing aquatic plant which causes environmental problems in continental water bodies. Harvesting and handling this plant becomes an issue, and focus has been put on the research of treatment alternatives. Amongst others, energy production through biomethanation has been proposed. The aim of this study was to assess the anaerobic biodegradability of water hyacinth under mesophilic and thermophilic conditions. The effect of a thermal sludge pre-treatment at 80 °C was also evaluated. To this end, anaerobic biodegradability tests were carried out at 35 °C and 55 °C, with raw and pre-treated water hyacinth. According to the results, the thermal pre-treatment enhanced the solubilisation of water hyacinth (i.e. increase in the soluble to total chemical oxygen demand (COD)) from 4% to 12% after 30 min. However, no significant effect was observed on the methane yields (150–190 L CH₄/kg volatile solids). Initial methane production rates for thermophilic treatments were two fold those of mesophilic ones (6–6.5 L vs. 3–3.5 L CH₄/kg COD·day). Thus, higher methane production rates might be expected from thermophilic reactors working at short retention times. The study of longer low temperature pre-treatments or pre-treatments at elevated temperatures coupled to thermophilic reactors should be considered in the future.     

Manganese in the urban atmosphere: identifying anomalous concentrations and sources

Purpose  

Industrial emissions can raise urban background levels of inhalable Mn particles in an order of magnitude above normal, eclipsing the contribution made by natural sources and traffic.     

Biosorption of zinc ions from aqueous solution by the microalga Scenedesmus obliquus

Aquatic environments are often exposed to toxic heavy metals, which gain access to the food chain via microalgae and may cause severe problems at higher trophic levels. However, such a metabolic specificity can be taken advantage of in bioremediation strategies. The potential of a novel wild strain of Scenedesmus obliquus, previously isolated from a heavy metal-contaminated site in northern Portugal, to remove Zn from aqueous solutions was thus studied, using several initial concentrations. The removal extent reached its maximum by 1 day: 836.5 mg Zn/g biomass, at the initial concentration of 75 mg/L, mainly by adsorption onto the cell surface. Comparative studies encompassing a commercially available strain of the same microalgal species led to a maximum removal extent of only 429.6 mg Zn/g biomass, under identical conditions. Heat-inactivated cells permitted a maximum removal of 209.6 mg Zn/g biomass, at an initial concentration of 50 mg Zn/L. The maximum adsorption capacity of Zn, estimated via Langmuir’s isotherm, was 330 mg Zn/g biomass. Finally, Zn removal was highest at pH 6.0–7.0. It was proven, for the first time, that such a wild microalga can uptake and adsorb Zn very efficiently, which unfolds a particularly good potential for bioremediation. Its performance is far better than similar (reference) species, especially near neutrality, and even following heat-treatment.     

Air stripping of ammonia from pig slurry: characterisation and feasibility as a pre- or post-treatment to mesophilic anaerobic digestion

The objective of the present paper has been to study the effect of pig slurry waste type, fresh or anaerobically digested, and the effect of initial pH on ammonia air stripping from pig slurry waste at high temperature (80 degrees C). Stripping process as pre- or post-treatment to anaerobic digestion has been also evaluated. Treatment performances differ according to pig slurry type. When fresh pig slurry is used, despite working at 80 degrees C, a high initial pH (11.5) is required for complete ammonia removal. On the other hand, for digested pig slurry, complete ammonia removal without pH modification is possible and organic matter significantly less contaminates recovered ammonia salt. Batch anaerobic tests showed that ammonia air stripping is not an advisable pre-treatment to pig slurry anaerobic digestion.     

Assessing instruments for mixed household solid waste collection services in the Flemish region of Belgium

Instruments to reduce waste can be divided into three groups: first, pecuniary incentives; second, service level; finally, measurements stimulating prevention and waste reduction. Also specific characteristics of the community determine the amount of waste generated. We evaluate whether findings in literature on effectiveness of policy measures are valid for Belgium, specifically for the Flemish region. The policy mix instituted by the Flemish authorities in the ‘implementation plan household waste 2003–2007’ and implemented by local authorities, is assessed. Multiple regression analysis identifies those measurements having the greatest impact on household solid waste.We found an income elasticity of 0.326. Also the provided service level has a significant impact. Pecuniary incentives are effective instruments in reducing waste, with a price elasticity of −0.139. Furthermore, a higher percentage of direct costs, directly attributable to waste services, borne by households, reduces waste. A consequent implementation of the ‘polluter pays’ principle proves to be effective.