Economic Comparison of Emission Control Systems for Glass Manufacturing Furnaces with Heat Recovery

ABSTRACT

Glass manufacturing, like other process industries, is faced with air pollution compliance problems due to ever stricter emission limits. Several waste gas cleaning equipment options are available for air pollution control (APC) in glass plants, the most common arrangements being based on electrostatic precipitator (ESP) or fabric filter (FF) dust collectors and semi-wet or dry processes for acid gas removal. However, several counteracting aspects affect the choice of gas cleaning technologies, which are confirmed by the discrepancies encountered in actual suppliers' bids. In this paper, the main pollution control options are analyzed by carrying out a critical comparison under the cost-effectiveness point of view to select the lowest cost arrangement considering capital investment, operating expenses, and energy-saving revenues from heat recovery processes. The analysis is carried out with reference to a case study involving actual float glass production lines at Pilkington plants in Italy.     

Estimation of PCDD/F distribution and fluxes in the Venice Lagoon,Italy: combining measurement and modelling approaches

The available experimental information on the occurrence of PCDD/Fs in the Venice Lagoon, Italy, was compiled and used to calculate fugacities for the environmental compartments of sediment, suspended particulate matter (SPM), water and air and then used to estimate fugacity ratios and assess the likely net direction of flux between media. The bottom sediment: SPM fugacity ratios for different PCDD/Fs indicate conditions close to equilibrium, suggestive of the close coupling of SPM with re-suspended sediment. Sediment/water and the sediment/air fugacity ratios suggest that net flux directions vary depending on the congener and the location within the lagoon. Net sediment-water-air movement (i.e. re-mobilisation/volatilisation) is suggested for the lighter congeners from the industrial canals, where the highest PCDD/F concentrations in the lagoon occur. The tendency to volatilise increases with decreasing congener molecular weight. In contrast, net deposition (air-water-sediment) appears to be occurring for the heaviest (hepta- and octa-) substituted PCDD/Fs. OCDF represents a marker of the industrial district of the lagoon, decreasing in concentration and as a fraction of total PCDD/Fs with increasing distance. The fugacity-based quantitative water air sediment interaction (QWASI) mass-balance model was applied to the central part of the lagoon. The key parameters for the determination of the model output, identified by a sensitivity analysis, were: the sediment active depth, the sediment re-suspension and deposition rates, and the total input of PCDD/Fs to the system. The QWASI model also indicates the tendency for the lighter PCDD/Fs to be released from surface sediment to the water column.     

Cost-Effectiveness Analysis of Waste Gas Treatment Plants for the Glass Industry

ABSTRACT

Cost-effectiveness of different plant solutions for glass furnace waste gas cleaning is compared in the present paper. Plant arrangements based on electrostatic precipi-tator or fabric filter dust collectors and wet, semi-dry, or dry processes for acid gas removal have been considered. A critical survey of each solution's advantages and disadvantages has been presented, taking into account both effectiveness and costs resulting from each available system. Finally, a quantitative assessment has been provided with reference to a case study involving actual float glass production lines at SIV plants located in northern and central Italy.     

Sulphurous air pollutants and exposure events of workers in thermal-mineral springs: a case study of Contursi Terme (Salerno,Italy)

Environmental Science and Pollution Research - Thermo-mineral springs are widely spread over the volcanic areas of Salerno, a city in southern Italy. Although the water of thermal structures...     

The environmental Kuznets curve and CO2 emissions in the USA

Environmental Science and Pollution Research - In this paper, we analyze the existence of the environmental Kuznets curve as reported by Kuznets (Am Econ Rev 5:1–28, 1955) by using the...     

Mortality due to haematological cancer in cities close to petroleum refineries in Spain

Controversy exists as to whether working or living in the vicinity of a petroleum refinery (RF) increases the risk of haematological cancer (HC). The European Pollutant Release and Transfer Register obliges petroleum refineries to notify their emissions of toxic substances which include carcinogenic substances. Our objective is to determine if living in the proximity of an RF is associated with a greater risk of mortality due to HC in the census tracts (CTs) of the Spanish cities of Bilbao, Cartagena, Castellón, La Coruña, Huelva, and Santa Cruz de Tenerife. This is an ecological study of mortality in the years 1996–2007 which includes 968 CTs with 1,263,371 inhabitants. Exposure has been measured as the distance from the centroid of each CT to the RF. The Besag–York–Mollié autoregressive spatial model has been fitted by R-INLA to estimate the relative risk (RR) and 95 % credible intervals (95 % CrI) for distance in quintiles. The most distant quintile has been taken as the reference. A total of 2,574 persons died of HC. The distances from the CTs to RFs ranged from 0.5 to 22.5 km (median?=?7.6 km). All of the RRs for the quintiles of distances in Huelva were greater than 1. Statistically significant excess risk was shown in Cartagena in the nearest CT (1.8 to 6.8 km; RR?=?1.43, 95 % CrI 1.02 to 2.02). Radial effects have not been detected between the CT of residence and the petroleum RF in mortality due to HC in any of the cities.     

Genotoxicity detected in wild mice living in a highly polluted wetland area in south western Spain

A field study was carried out in the south of the Iberian Peninsula in an industrial area in the neighbourhood of Huelva city, SW Spain, and in a natural area (Do?ana National Park) for comparison, to estimate the genetic risk induced by environmental pollution in wild mice. Genotoxic effects in a sentinel organism, the Algerian mice (Mus spretus) free living in the industrial area were compared with animals of the same species living in the natural protected area. The single cell gel electrophoresis, or Comet assay, was performed as a genotoxicity test in peripheral blood of mice. Our results clearly show that mice free living in the contaminated area bear a high burden of genetic damage as compared with control individuals. The results suggest that the assessing of genotoxicity levels by the Comet assay in wild mice can be used as a valuable test in pollution monitoring and environmental conservation.     

Retention of arsenic on hydrous ferric oxides generated by electrochemical peroxidation

Electrochemical peroxidation (ECP), an emerging remediation technology, with direct electric current applied to steel electrode and small addition of H2O2, was used to remove As(III) from contaminated aqueous solutions. Bench scale experiments were conducted to evaluate the sorption and distribution of arsenic between the soluble and solid state hydrous ferric oxides (HFO) formed as part of the ECP process. ECP was effective in removing arsenic from the aqueous solution, with >98% of the applied As(III) adsorbed on HFO. Removal was complete within 3 min of ECP treatment and apparently independent of the initial pH of the water (3.5-9.5). In the absence of H2O2 more As(III) was adsorbed by solid state iron at pH 9.5 than at 3.5 (2600 vs. 1750 microg l(-1)). Thus H2O2 was crucial to oxidize As(III) to As(V) which is more strongly retained by HFO. Removal of As was not significantly affected by the concentration of H2O2 or by current processing time. The optimal operating conditions were pH < 6.5, H2O2 concentration of 10 mg l(-1) and current process time not exceeding 3 min. X-ray diffraction (XRD), diffuse-reflectance infrared Fourier transform (DRIFT) spectroscopy and transmission electron microscopy (TEM) were applied to study the HFO deposits. The XRD data indicated the prevalence of poorly ordered Fe minerals in the suspended ECP solids with a dominance of 5 line ferrihydrite in the absence of H2O2. At pH 3.5 and with 100 mg H2O2 l(-1), akaganeite was formed, whereas an incipient hematitic phase, reflection at 0.39 nm, occurred at pH 6.5. DRIFT data indicate that both As(III) and As(V) were specifically adsorbed onto HFO at acid and neutral pH. TEM observations indicated the presence of spherical shape ferrihydrite and provided evidence for possible formation of subrounded hematite and acicular shape goethite.     

Bioaccumulation and elimination of 14C-lindane by Enchytraeus albidus in artificial (OECD) and a natural soil

Bioaccumulation and elimination of 14C-lindane in Enchytraeus albidus was studied in artificial OECD soil and a silty loam from an agricultural field in Central West Portugal. Results showed that enchytraeids were able to bioaccumulate the chemical with a kinetic pattern similar to that of earthworms: fast uptake within a few days and a biphasic elimination pattern. A 10 day period to study uptake was sufficient, but a few more days were probably necessary for elimination. Bioaccumulation was influenced by soil type. The authors suggest that higher organic matter (OM) content and also the higher content on sand particles in the OECD soil may have led to a faster elimination: hydrophobic chemicals tend to adsorb to OM being in this way less bioavailable and therefore less bioaccumulated having bioaccumulation factor value around 6 while in natural soil is 10; the sand could act as abrasive particles (helpers) in the elimination process leading to an elimination of 90% of the chemical in two days while in natural soil 67% was eliminated in the same period of time.