RESEARCH: Shrub Propagation Techniques for Biological Control of Invading Tree Species

Cornus stolonifera, Salix petiolaris, and Spiraea alba clones already located within the corridor of an electrical power line. To establish the efficiency of treatments, we examined the statistical differences of growth traits between species and treatments. An analysis of the effects of layering shows, after the first growth season, differences for all growth traits in only one species, Spiraea alba. After the second growth season, we observed the development of new aerial stems. Layering favors horizontal expansion of shrubs over height development. The third year after treatment, the effect of layering is reduced except for Cornus stolonifera, which continuously increases, as shown by the significant progression of the clone issued from the layer even five years after treatments. With the cutting back technique, we expected a distinct vertical growth of the shrubs at the expense of increasing the crown diameter. This technique would be best associated with the rejuvenation of clones, followed by a layering of new shoots to allow a horizontal expansion of the shrubs. Therefore, the formation of a dense shrub community by layering should be considered a valuable approach for the biological control of undesirable trees in powerline rights-of-way.     

Mechanical and Barrier Properties of Biodegradable Films Made from Chitosan and Poly (Lactic Acid) Blends

Biodegradable film blends of chitosan with poly(lactic acid) (PLA) were prepared by solution mixing and film casting. The main goal of these blends is to improve the water vapor barrier of chitosan by blending it with a hydrophobic biodegradable polymer from renewable resources. Mechanical properties of obtained films were assessed by tensile test. Thermal properties, water barrier properties, and water sensitivity were studied by differential scanning calorimeter analysis, water vapor permeability measurements, and surface-angle contact tests, respectively. The incorporation of PLA to chitosan improved the water barrier properties and decreased the water sensitivity of chitosan film. However, the tensile strength and elastic modulus of chitosan decreased with the addition of PLA. Mechanical and thermal properties revealed that chitosan and PLA blends are incompatible, consistent with the results of Fourier transform infrared (FTIR) analysis that showed the absence of specific interaction between chitosan and PLA.     

Tree-based intercropping systems increase growth and nutrient status of hybrid poplar: A case study from two Northeastern American experiments

Tree-based intercropping is considered to be a potentially useful land use system for mitigating negative environmental impacts from intensive agriculture such as nutrient leaching and greenhouse gas emissions. Rapid early growth of trees is critical for rapidly accruing environmental benefits provided by the trees. We tested the hypothesis that intercropping increases the growth and nutrient status of young hybrid poplars (Populus spp.), compared to a harrowing alley treatment (i.e., no intercrop), in two experimental sites (St-Rémi and St-Édouard) in southern Québec, Canada. Three hybrid poplar clones (TD3230, Populus trichocarpa × deltoides; DN3308, P. deltoides × nigra; and NM3729, P. nigra × maximowiczii) were planted at St-Rémi. Clones DN3333 and DN3570 were planted at St-Édouard. At St-Rémi, intercropping comprised a 4-year succession of three crops of soybean (Glycine max (L.) Merr.) and barley (Hordeum vulgare L.). At St-Édouard, intercropping comprised a 3-year succession of buckwheat (Fagopyrum esculentum Moench), winter rye (Secale cereale L.), and winter wheat (Triticum aestivum L.). At St-Rémi, four years after treatment began, leafless aboveground biomass of hybrid poplars in the intercropping treatment was 37% higher compared to that in the harrowing treatment. At St-Édouard, after the third growing season, leafless aboveground biomass of hybrid poplars in the intercropping treatment was significantly higher by 40%. Vector analysis of foliar nutrient concentrations and comparison with critical concentration values showed that N (both sites) and K (St-Édouard) were the most limiting nutrients. Hybrid poplar clones responded similarly to treatments, with no consistent differences in tree growth observed between clones. We conclude that tree-based intercropping systems may offer an effective means of improving the early growth of hybrid poplars planted to provide both environmental services and high-value timber.     

The role of digital data entry in participatory environmental monitoring

Many argue that monitoring conducted exclusively by scientists is insufficient to address ongoing environmental challenges. One solution entails the use of mobile digital devices in participatory monitoring (PM) programs. But how digital data entry affects programs with varying levels of stakeholder participation, from nonscientists collecting field data to nonscientists administering every step of a monitoring program, remains unclear. We reviewed the successes, in terms of management interventions and sustainability, of 107 monitoring programs described in the literature (hereafter programs) and compared these with case studies from our PM experiences in Australia, Canada, Ethiopia, Ghana, Greenland, and Vietnam (hereafter cases). Our literature review showed that participatory programs were less likely to use digital devices, and 2 of our 3 more participatory cases were also slow to adopt digital data entry. Programs that were participatory and used digital devices were more likely to report management actions, which was consistent with cases in Ethiopia, Greenland, and Australia. Programs engaging volunteers were more frequently reported as ongoing, but those involving digital data entry were less often sustained when data collectors were volunteers. For the Vietnamese and Canadian cases, sustainability was undermined by a mismatch in stakeholder objectives. In the Ghanaian case, complex field protocols diminished monitoring sustainability. Innovative technologies attract interest, but the foundation of effective participatory adaptive monitoring depends more on collaboratively defined questions, objectives, conceptual models, and monitoring approaches. When this foundation is built through effective partnerships, digital data entry can enable the collection of more data of higher quality. Without this foundation, or when implemented ineffectively or unnecessarily, digital data entry can be an additional expense that distracts from core monitoring objectives and undermines project sustainability. The appropriate role of digital data entry in PM likely depends more on the context in which it is used and less on the technology itself.     

Surface lipids of queen-laid eggs do not regulate queen production in a fission-performing ant

In animal societies, most collective and individual decision making depends on the presence of reproductive individuals. The efficient transmission of information among reproductive and non-reproductive individuals is therefore a determinant of colony organization. In social insects, the presence of a queen modulates multiple colonial activities. In many species, it negatively affects worker reproduction and the development of diploid larvae into future queens. The queen mostly signals her presence through pheromone emission, but the means by which these chemicals are distributed in the colony are still unclear. In several ant species, queen-laid eggs are the vehicle of the queen signal. The aim of this study was to investigate whether queen-laid eggs of the ant Aphaenogaster senilis possess queen-specific cuticular hydrocarbons and/or Dufour or poison gland compounds, and whether the presence of eggs inhibited larval development into queens. Our results show that the queen- and worker-laid eggs shared cuticular and Dufour hydrocarbons with the adults; however, their poison gland compounds were not similar. Queen-laid eggs had more dimethylalkanes and possessed a queen-specific mixture of cuticular hydrocarbons composed of 3,11?+?3,9?+?3,7-dimethylnonacosane, in higher proportions than did worker-laid eggs. Even though the queen-laid eggs were biochemically similar to the queen, their addition to experimentally queenless groups did not prevent the development of new queens. More studies are needed on the means by which queen ant pheromones are transmitted in the colony, and how these mechanisms correlates with life history traits.     

Loss of legs: is it or not a handicap for an orb-weaving spider?

Leg loss is a common phenomenon in spiders, and according to the species 5% to 40% of the adults can present at least one missing leg. There is no possibility of regeneration after adult moult and the animal must manage with its missing appendages until its death. With the loss of one or more legs, female orb-weaving spiders can be penalized twice: firstly, because the legs are necessary for web construction and secondly, the legs are essential for the control of the prey after its interception by the web. During development, spiders may be also penalized because regeneration has energetic costs that take away resources for survival, growth and reproduction. All these consequences should influence negatively the development of the spider and thus its fitness. We investigated the impact of leg loss in the orb-weaving spider, Zygiella x-notata by studying its frequency in a natural population and web building and prey capture behaviours in laboratory. In field populations, 9.5% to 13%, of the adult females presented the loss of one or more legs; the majority of individuals had lost only one leg (in 48% of cases, a first one). Leg loss seems to affect all the adult spiders, as there is no difference of mass between intact spiders and those with missing leg. Data obtained with laboratory-reared spiders, showed that the loss of legs due to the moult is rare (less than 1%). Considering changes in web design, spiders with missing legs decreased their silk investment, increased the distance between spiral turns but did not change the capture surface of the web. Under our laboratory experimental conditions, spiders with one or two lost legs did not present any difference in prey capture efficiency. In laboratory conditions, spiders with lost leg(s) did not show any difference in egg sac production or in longevity (adult lifespan) compared to intact spiders.     

温室条件下UV-B辐射对蓝藻结皮生长和超微结构的影响

UV-B辐射是野外蓝藻结皮经常面临的一种环境胁迫因子.报道了温室条件下UV-B辐射对蓝藻结皮形态、生理和超微结构特征的影响.在本研究中,首先通过接种具鞘微鞘藻和爪哇伪枝藻形成初始蓝藻结皮,接着以初始蓝藻结皮为材料进行3种辐射处理:光合有效辐射、UV-B辐射+光合有效辐射和N-乙酰半胱氨酸+UV-B辐射+光合有效辐射.在...     

Estimation of road traffic emission factors from a long term tracer study

Road traffic emissions, one of the largest source categories in megacity inventories, are highly uncertain. It is essential to develop methodologies to reduce these uncertainties to manage air quality more effectively. In this paper, we propose a methodology to estimate road traffic emission factors (EFs) from a tracer experiment and from roadside pollutants measurements. We emitted continuously during about 300 non-consecutive hours a passive tracer from a finite line source placed on one site of an urban street. At the same time, we measured continuously the resulting tracer concentrations at the other side of the street with a portable on-line gas chromatograph. We used n-propane contained in commercial liquid petroleum gas (LPG) as a passive tracer. Propane offers several advantages to traditional tracers (SF6, N2O, CFCs): low price, easily available, non-reactive, negligible global warming potential, and easy to detect with commercial on-line gas chromatographs.The tracer experiment was carried out from January to March 2007 in a busy street of Ho Chi Minh City (Vietnam). Traffic volume, weather information and pollutant concentrations were also measured at the measurement site. We used the results of the tracer experiment to calculate the dilution factors and afterwards we used these dilution factors, the traffic counts and the pollutant concentrations to estimate the EFs. The proposed method assumes that the finite emission line represents the emission produced by traffic in the full area of the street and therefore there is an error associated to this assumption. We use the Computational Fluids Dynamics (CFD) model MISKAM to calculate this error and to correct the HCMC EFs. EFs for 15 volatile organic compounds (VOCs) and NO are reported here. A comparison with available studies reveals that most of the EFs estimated here are within the range of EFs reported in other studies.     

A survey on the public perception of CCS in France

An awareness and opinion survey on carbon capture and storage (CCS) was conducted on a representative sample of French residents aged 15 years and above. About 6% of respondents were able to provide a satisfactory definition of the technology. The key question about ‘approval of or opposition to’ the use of CCS in France was asked twice, first after presenting the technology, then after explaining its potential adverse consequences. The approval rates, which were 59% and 38%, respectively, show that there is no a priori rejection of the technology. The sample was split in two to test for a semantic effect: half of the questionnaires used “Stockage” (English: storage), the other half “Sequestration”. Manipulating the vocabulary had no statistically significant effect on approval rates. Stockage is more meaningful, but does not convey the idea of permanent monitoring.     

Comparative Sustainability Assessment of Starch Nanocrystals

Fossil energy depletion and growing environmental concerns have brought up increasing interest in bio-based eco-efficient and high technology materials. Among them, starch nanocrystals (SNC) consist of crystalline nano-platelets produced from the hydrolysis of starch and mainly used as nano-fillers in polymeric matrix. New applications have brought up the need for scaling-up the SNC preparation process. However, for this new bio-based nano-material to be sustainable, its preparation and processing should have limited impacts on the environment. Thus, together with analyzing and making recommendations for the scaling-up of SNC production process, it is worth identifying “environmentally sensitive” steps using life cycle analysis (LCA). To that purpose, different scenarios have been proposed and compared according to different environmental impacts. Also, a comparison to its main competitor, i.e. organically modified nanoclay (OMMT), is proposed. From a LCA point of view, SNC preparation requires less energy than OMMT extraction, but global warming and acidification indicators were higher than for OMMT. However, SNC have the added advantages to be renewable and biodegradable contrary to OMMT which contribute to non-renewable energy and mineral depletion. Thus, used as filler, SNC have a positive impact on the end of life of the filled material. From these observations, recommendations for the scaling-up of the SNC preparation process are made and deal mainly with the use of land and water.