Magnetic properties of biogenic selenium nanomaterials

Environmental Science and Pollution Research - Bioreduction of selenium oxyanions to elemental selenium is ubiquitous; elucidating the properties of this biogenic elemental selenium (BioSe) is thus...     

Prediction of flange wrinkling in deep drawing process using bifurcation criterion

Surface distortions in the form of wrinkles are often observed in sheet metals during stamping and other forming operations. Because of the trend in recent years towards thinner, higher-strength sheet metals, wrinkling is increasingly becoming a more common and troublesome mode of failure in sheet metal forming. The prediction and prevention of wrinkling during a sheet forming process are important issues for the design of part geometry and processing parameters. This paper treats the phenomenon of flange wrinkling as a bifurcated solution of the equations governing the deep drawing problem when the flat position of the flange becomes unstable. Hill’s bifurcation criterion is used to predict the onset of flange wrinkling in circular and square cup drawing. In particular, the maximum cup height that can be drawn without the onset of flange wrinkling is predicted for the given set of process parameters. A parametric study of the maximum cup height is also carried out with respect to various geometric, material and process parameters. Finite element formulation, based on the updated Lagrangian approach, is employed for the analysis. The incremental logarithmic strain measure, which allows the use of a large incremental deformation, is used. The stresses are updated in a material frame. The material is assumed to be elastic–plastic, strain hardening, yielding according to an anisotropic yield criterion of Barlat et al. (2005) [23] (named as Yld2004-18p). Isotropic power law hardening is assumed. Inertia forces are neglected due to small accelerations. Modified Newton–Raphson iterative technique is used to solve the nonlinear incremental equations.     

一种改进的多学习教与学优化算法

针对传统教与学算法在解决复杂多峰函数优化问题时,具有局部最优且搜索开发能力较差的缺点,提出了一种改进的多学习教与学优化算法,新算法为学员的每一维加入不同的教学因子,设计了基于学员均值比较的教师选择策略和向教师及学员学习的多学习策略。基于多个单峰和多峰函数的仿真结果表明,新算法跟传统的、改进的教与学算法相比,在稳定性、寻优精度和收敛速度方面更具优势。     

An Effective Means of Biofiltration of Heavy Metal Contaminated Water Bodies Using Aquatic Weed Eichhornia crassipes

Various aquatic plant species are known to accumulate heavy metals through the process of bioaccumulation. World’s most troublesome aquatic weed water hyacinth (Eichhornia crassipes) has been studied for its tendency to bio-accumulate and bio-magnify the heavy metal contaminants present in water bodies. The chemical investigation of plant parts has shown that it accumulates heavy metals like lead (Pb), chromium (Cr), zinc (Zn), manganese (Mn) and copper (Cu) to a large extent. Of all the heavy metals studied Pb, Zn and Mn tend to show greater affinity towards bioaccumulation. The higher concentration of metal in the aquatic weed signifies the biomagnification that lead to filtration of metallic ions from polluted water. The concept that E. crassipes can be used as a natural aquatic treatment system in the uptake of heavy metals is explored.     

Water quality improvement through macrophytes—a review

Increasing urbanization, industrialization and over population is leading to the degradation of the environment. The main hazardous contents of the water pollution are heavy metals etc. Water bodies are the main targets for disposing the pollutants directly or indirectly. They are again at the receiving end as the storm water, residential and commercial waste is disposed into it. The prevailing purification technologies used to remove the contaminants are too costly and sometimes non-eco friendly also. Therefore, the research is oriented towards low cost and eco friendly technology for water purification, which will be beneficial for community. The present paper is a comprehensive review of approximately 38 literature sources. The paper discusses the potential of different aquatic plants (macrophytes) in purifying water and wastewater. Experimental work was developed to test the hypothesis that nutrient enrichment enhances metal tolerance of relative macrophyte.     

An innovative technique for lake management with reference to aeration unit installed at lower lake, Bhopal, India

Water is key element in human life. All forms of life upon the earth depend upon water for their mere existence. Life & water may be aptly said to be two facets of the same coin. Most of the water bodies are getting polluted due to domestic waste, sewage, industrial waste and agricultural effluent. The present study is designed to ascertain the effectiveness of artificial aeration cum Ozonizer unit installed at Lower Lake, Bhopal for assessment of water quality. Various physico- chemical parameters like pH, Dissolved oxygen, Biochemical Oxygen demand, Chemical oxygen demand, nitrate, phosphate and bacteriological status were studied to assess the extent of deterioration in water quality of Lower lake and at the same time to assess the performance of the dual aeration system in improvement of water quality.     

Antioxidative responses in relation to growth of mustard (Brassica juncea cv. Pusa Jaikisan) plants exposed to hexavalent chromium

Effect of hexavalent chromium (Cr6+) was seen on Brassica juncea cv. Pusa Jaikisan grown for 15 days in hydroponic culture supplemented with 0.2, 2 and 20 microM Cr. The inhibitory response of Cr6+ on growth of B. juncea was concentration and time dependent. The stimulation of plant growth, observed in response to exposure to 0.2 microM Cr6+, during initial 5 days was reversed on prolonged treatment and at higher Cr6+ concentrations (2 and 20 microM Cr6+). Despite reduction in growth, chlorophyll content increased substantially on 15 days exposure to 20 microM Cr6+. Significant increases in lipid peroxidation and tissue concentration of H2O2 occurred in plants exposed to 2 and 20 microM Cr6+. Effect of Cr6+ on antioxidative enzymes in roots and leaves was differential. SOD and CAT activities at lower levels of Cr6+ supply remained higher all through the treatment. While APX was very susceptible to excess Cr6+, GR and GST increased at elevated levels of Cr6+. The results suggested Cr6+ induced depression in plant growth of B. juncea to be a function of increased cellular accumulation of Cr despite increase in the activities of some of the antioxidative enzymes.     

Accumulation and release of petroleum-derived aromatic hydrocarbons by four species of marine animals

Survival of Ctenodiscus crispatus during exposure to hypoxia (P _{O 2}<3 mm Hg) at 5°C is greater than that of any echinoderm reported in the literature, the LT₅₀ being 248 h; this is reduced to 236 h in the presence of hydrogen sulfide. Unlike Asterias vulgaris and A. forbesi, both of which lose the tube foot response to tactile stimulation long before death from hypoxia occurs, C. crispatus remains responsive until death. The extension of the highly protrusible epiproctal cone, which occurs in 75% of the mud stars simultaneously exposed to hypoxia and H₂S, serves to maintain burrow contact with the overlying water. The rate of oxygen consumption remains constant down to an ambient oxygen partial pressure of 10 to 25 mm Hg, becoming more oxygen-dependent after prior exposure of the asteroids to hypoxia. C. crispatus exhibits a clear oxygen-debt phenomenon as well as a compensatory reduction in the residual P _{O 2} (oxygen partial pressure at which oxygen consumption ceases) from 2.4 to 0.2 mm Hg after hypoxic exposure.