Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size <45 mm increased by around 2× after bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property. 相似文献
Currently, the correlation between ambient temperature and systemic lupus erythematosus (SLE) hospital admissions remains not determined. The aim of this study was to explore the correlation between ambient temperature and SLE hospital admissions in Hefei City, China. An ecological study design was adopted. Daily data on SLE hospital admissions in Hefei City, from January 1, 2007, to December 31, 2017, were obtained from the two largest tertiary hospitals in Hefei, and the daily meteorological data at the same period were retrieved from China Meteorological Data Network. The generalized additive model (GAM) combined with distributed lag nonlinear model (DLNM) with Poisson link was applied to evaluate the influence of ambient temperature on SLE hospital admissions after controlling for potential confounding factors, including seasonality, relative humidity, day of week, and long-term trend. There were 1658 SLE hospital admissions from 2007 to 2017, including 370 first admissions and 1192 re-admissions (there were 96 admissions with admission status not stated). No correlation was observed between ambient temperature and SLE first admissions, but a correlation was found between low ambient temperature and SLE re-admissions (RR: 2.53, 95% CI: 1.11, 5.77) (3.5 °C vs 21 °C). The effect of ambient temperature on SLE re-admissions remained for 2 weeks but disappeared in 3 weeks. Exposure to low ambient temperature may increase hospital re-admissions for SLE, and thus it is important for SLE patients to maintain a warm living environment and avoid exposure to lower ambient temperature.
Constructed wetlands(CWs) have been successfully used for treating various wastewaters for decades and have been identified as a sustainable wastewater management option for developing countries. With the goal of promoting sustainable engineered systems that support human well-being but are also compatible with sustaining natural(environmental)systems, the application of CWs has become more relevant. Such application is especially significant for developing countries with tropical climates, which are very conducive to higher biological activity and productivity, resulting in higher treatment efficiencies compared to those in temperate climates. This paper therefore highlights the practice,applications, and research of treatment wetlands under tropical and subtropical conditions since 2000. In the present review, removal of biochemical oxygen demand(BOD) and total suspended solid(TSS) was shown to be very efficient and consistent across all types of treatment wetlands. Hybrid systems appeared more efficient in the removal of total suspended solid(TSS)(91.3%), chemical oxygen demand(COD)(84.3%), and nitrogen(i.e.,80.7% for ammonium(NH)4-N, 80.8% for nitrate(NO)3-N, and 75.4% for total nitrogen(TN))as compared to other wetland systems. Vertical subsurface flow(VSSF) CWs removed TSS(84.9%), BOD(87.6%), and nitrogen(i.e., 66.2% for NH4-N, 73.3% for NO3-N, and 53.3% for TN)more efficiently than horizontal subsurface flow(HSSF) CWs, while HSSF CWs(69.8%)showed better total phosphorus(TP) removal compared to VSSF CWs(60.1%). Floating treatment wetlands(FTWs) showed comparable removal efficiencies for BOD(70.7%),NH4-N(63.6%), and TP(44.8%) to free water surface(FWS) CW systems. 相似文献
Constructed wetlands (CWs) have been successfully used for treating various wastewaters for decades and have been identified as a sustainable wastewater management option for developing countries. With the goal of promoting sustainable engineered systems that support human well-being but are also compatible with sustaining natural (environmental) systems, the application of CWs has become more relevant. Such application is especially significant for developing countries with tropical climates, which are very conducive to higher biological activity and productivity, resulting in higher treatment efficiencies compared to those in temperate climates. This paper therefore highlights the practice, applications, and research of treatment wetlands under tropical and subtropical conditions since 2000. In the present review, removal of biochemical oxygen demand (BOD) and total suspended solid (TSS) was shown to be very efficient and consistent across all types of treatment wetlands. Hybrid systems appeared more efficient in the removal of total suspended solid (TSS) (91.3%), chemical oxygen demand (COD) (84.3%), and nitrogen (i.e., 80.7% for ammonium (NH)4-N, 80.8% for nitrate (NO)3-N, and 75.4% for total nitrogen (TN)) as compared to other wetland systems. Vertical subsurface flow (VSSF) CWs removed TSS (84.9%), BOD (87.6%), and nitrogen (i.e., 66.2% for NH4-N, 73.3% for NO3-N, and 53.3% for TN) more efficiently than horizontal subsurface flow (HSSF) CWs, while HSSF CWs (69.8%) showed better total phosphorus (TP) removal compared to VSSF CWs (60.1%). Floating treatment wetlands (FTWs) showed comparable removal efficiencies for BOD (70.7%), NH4-N (63.6%), and TP (44.8%) to free water surface (FWS) CW systems. 相似文献
Bio-drying has been applied to improve the heating value of municipal solid waste (MSW) prior to combustion. In the present study, evolution of heavy metals in MSW during bio-drying and subsequent combustion was studied using one aerobic and two combined hydrolytic-aerobic scenarios. Heavy metals were concentrated during bio-drying and transformed between different metal fractions, namely the exchangeable, carbonate-bound, iron- and manganese-oxides-bound, organic-matter-bound and residual fractions. The amounts of heavy metals per kg of bio-dried MSW transferred into combustion flue gas increased with bio-drying time, primarily due to metals enrichment from organics degradation. Because of their volatility, the partitioning ratios of As and Hg in flue gas remained stable so that bio-drying and heavy metal speciation had little effect on their transfer and partitioning during combustion. In contrast, the partitioning ratios of Pb, Zn and Cu tended to increase after bio-drying, which likely enhanced their release potential during combustion. 相似文献
One aerobic and two combined bio-drying processes were set up to investigate the quantitative relationships of sorting efficiency and combustion properties with organics degradation and water removal during bio-drying. Results showed that the bio-drying could enhance the sorting efficiency of municipal solid waste (MSW) up to 71% from the initial of 34%. The sorting efficiency was correlated with water content negatively (correlation coefficient, r = −0.89) and organics degradation rate positively (r = 0.92). The higher heating values (HHVs) were correlated with organics degradation negatively for FP (i.e. the sum of only food and paper) (r = −0.93) but positively for the mixing waste (MW) (r = 0.90), whereas the lower heating values (LHVs) were negatively correlated with water content for both FP (r = −0.71) and MW (r = −0.96). Other combustion properties depended on organics degradation performance, except for ignition performance and combustion rate. The LHVs could be greatly enhanced by the combined process with insufficient aeration during the hydrolytic stage. Compared with FP, MW had higher LHVs and ratios of volatile matter to fixed carbon. Nevertheless, FP had higher final burnout values than MW. 相似文献
Biostabilization can remove considerable amounts of moisture and degradable organic materials from municipal solid waste (MSW), and can therefore be an effective form of pretreatment prior to landfill. The environmental and economic impacts of two combined processes, active stage biostabilization + sanitary landfill (AL), and active and curing stage biostabilization + sanitary landfill (ACL), were compared with sanitary landfill (SL) for MSW with high moisture content. The results indicated that land requirement, leachate generation, and CH(4) emission in the ACL process decreased by 68.6%, 89.1%, and 87.6%, respectively, and the total cost was reduced by 24.1%, compared with SL. This implies that a combined biostabilization and landfill process can be an environmentally friendly and economically feasible alternative to landfill of raw MSW with high moisture content. Sensitivity analysis revealed that treatment capacity and construction costs of biostabilization and the oxidation factor of CH(4) significantly influenced the costs and benefits of the AL and ACL process at an extremely low land price. When the land price was greater than 100 USD m(-2), it became the dominating factor in determining the cost of treatment and disposal, and the total costs of ACL were reduced to less than 40% of those of SL. 相似文献