Recovery of benzene-rich oil from the degradation of metal- and metal oxide-containing poly(ethylene terephthalate) composites

Pure poly(ethylene terephthalate) (PET) resin and metal-/metal oxide-containing PET composites were thermally decomposed in the presence of Ca(OH)₂ using a tube reactor. The effects of batch and continuous processing, the presence of Ca(OH)₂, and PET size on benzene production were investigated. A maximum benzene yield and purity of 82.9 % and 78.8 wt%, respectively, were obtained at 700 °C in the presence of Ca(OH)₂ when using small PET particles; further, a continuous feed reactor was favored over a batch reactor. Effective contact between PET and Ca(OH)₂ was important in the PET degradation, which promoted hydrolysis of PET and decarboxylation of terephthalic acid, whereas pyrolysis was suppressed. Furthermore, the results of thermal decomposition of PET-based waste—PET-based X-ray films, magnetic tape, and prepaid cards—indicated that the metal and metal oxides contained in the waste had no significant catalytic effect on PET degradation or on the recovery of benzene-rich oil in the presence of Ca(OH)₂.     

Solubility parameters for determining optimal solvents for separating PVC from PVC-coated PET fibers

Poly(vinyl chloride) (PVC) in PVC-coated poly(ethylene terephthalate) (PET) fabrics can be separated through dissolution in a suitable solvent, leaving only the PET fibers. We investigated the solubility of PVC in 30 solvents using swelling tests. The results were compared with those obtained using the Hansen, Gutmann, Swain, E _T(30), and Kamlet–Taft parameters. For this purpose, Gaussian plots of the PVC swellability versus solubility parameter were used to decide the applicability of the solubility parameter system. Only Gutmann’s electron acceptor–donor parameter (AN + DN) and the Kamlet–Taft parameters β and π* could describe the PVC-solvent system satisfactorily. Tetrahydrofuran (THF), methyl ethyl ketone (MEK), N,N-dimethylformamide (DMF), cyclohexanone, and cyclopentanone were tested for separating PVC from PET at different temperatures. THF dissolved PVC at 20 °C, while cyclohexanone and cyclopentanone did so at 40 °C. Traces of PVC remained on the PET fibers when DMF was used. Complete dissolution of PVC was not achieved at any temperature with MEK. The present work shows that solubility parameters are a helpful tool for the search for suitable solvents. It shows also that solubility parameters have to be selected carefully, since their usefulness depends strongly on the polymer properties.     

The assessment of the coastal vulnerability and exposure degree of Gran Canaria Island (Spain) with a focus on the coastal risk of Las Canteras Beach in Las Palmas de Gran Canaria

The Coastal Vulnerability and Exposure Degree (CVED) of the Gran Canaria Island and the coastal risk of Playa de Las Canteras (Las Palmas de G.C.) have been assessed by means of a GIS analysis. The evaluation of coastal vulnerability (H) has been performed by using two different levels of analysis: the first one regarding the entire Island (Coastal Vulnerability Index method - CVI), the second one regarding specifically Las Canteras Beach, selected for its socio-economic importance (Coastal Vulnerability Assessment method - CVA). The application of the CVI method, based on geologic-geomorphologic and meteomarine data easily available, has allowed the regional scale assessment of coastal vulnerability (H) along the Gran Canaria coastline and, therefore, the individuation of more critical coast stretches deserving further analysis. The application of the CVA method, based on more specific morphologic-sedimentary beach features that allow to consider both the beach retreat due to storm surge and the coastal inundation due to run-up on the beach, has provided a large scale detail on the coastal vulnerability of Las Canteras Beach. Socio-economic and damage indexes have been determined for the 15 coastal municipalities included in the study area and, by means of the resulting matrix product, the degree of exposure (E_x) along the Gran Canaria coast has been assessed. Finally, the combination of coastal vulnerability and exposure levels has allowed to obtain the Coastal Vulnerability and Exposure Degree (CVED) for the entire Island and the risk levels that characterize specifically Las Canteras Beach. Major results in terms of CVED highlight prevailing low vulnerability and exposure levels along the western coast, and overall high vulnerability and exposure levels along the eastern coast, from Las Palmas de G.C. to San Bartolomé de Tirajana. The focus made on Playa de Las Canteras has allowed to identify the areas characterized by medium and high risk levels that represent approximately one third (940 m) of the entire beach and are located in its central part. The used two-level analysis approach has proved its efficiency by highlighting the degree of coastal vulnerability along the study coast and, especially, more critical coast stretches (CVI method) such as the Playa de Las Canteras that can be successfully analysed with the CVA approach allowing for a large-scale assessment of risk aspects, essential for a correct definition of priority management strategies. Results obtained with the present study, along with the awareness of the increasing phenomena of coastal erosion and marine flooding arising on the mid-long term due to the effects of global climate change, highlight the need for the competent public administrations of Gran Canaria to develop a strategic approach to coastal management and sustainable development that considers as a whole socio-economic values and natural resources, coastal vulnerability and exposure degree, and risk aspects.     

Alteration of potential harmful elements levels in sediments and biota from the central Mediterranean Sea (Aeolian Archipelago) following an episode of intense volcanic activity

In this paper levels of four (Hg, Cd, Pb, As) potential harmful elements (PHE) were measured in three different environmental matrices (sediments, macroalgae and fishes) from the Aeolian Archipelago and control areas both after 1 and 10 months from a volcanic activity of particular relevance occurred at the end of October 2002. Results were analysed on a multivariate statistical basis with the aim to evaluate: (I) general levels of pollution and increase of PHE due to the event; (II) differences observed among tested matrices in the time of recovery after the occurrence of the critical event; (III) the biological enrichment of PHE along the trophic web produced by the geological event. Results evidenced that volcanic emissions could represent a local source of particular relevance able to determine great enrichments of considered PHE in sediments and biological species. After 10 months from the event, levels in sediments and macroalgae notably decreased, whereas fish species evidenced an increase, principally related to the bioaccumulation phenomena. On the basis of the biological enrichment factors (BEF), major enrichments were evidenced after 1 month whereas, after 10 months, were recorded values reliable to an incomplete recovery. Concerning Cd, the BEF higher levels reported for the species Serranus cabrilla was probably related both to the diet and to the specific detoxification rates of this species.     

A dry deposition scheme for particulate matter coupled with a well-known Lagrangian Stochastic model for pollutant dispersion

Environmental Fluid Mechanics - A 3D dry deposition scheme for particulate matter (PM) is presented as a Free-Libre and Open-Source Software (FOSS) library, DePaSITIA (RSE SpA). This combines some...     

Nonpoint source pollution of urban stormwater runoff: a methodology for source analysis

The characterization and control of runoff pollution from nonpoint sources in urban areas are a major issue for the protection of aquatic environments. We propose a methodology to quantify the sources of pollutants in an urban catchment and to analyze the associated uncertainties. After describing the methodology, we illustrate it through an application to the sources of Cu, Pb, Zn, and polycyclic aromatic hydrocarbons (PAH) from a residential catchment (228 ha) in the Paris region. In this application, we suggest several procedures that can be applied for the analysis of other pollutants in different catchments, including an estimation of the total extent of roof accessories (gutters and downspouts, watertight joints and valleys) in a catchment. These accessories result as the major source of Pb and as an important source of Zn in the example catchment, while activity-related sources (traffic, heating) are dominant for Cu (brake pad wear) and PAH (tire wear, atmospheric deposition).     

A multi-agent simulation model for spatial optimisation of manure allocation

The EU Nitrate Directive has spurred many countries to regulate manure production and manure application. Farmers have three allocation options: spreading manure on their own land, transporting manure to other farmers' land or processing manure. The manure problem can be seen as an allocation problem. To better understand this allocation problem, we have developed the spatial mathematical programming multi-agent simulation (MP-MAS) model. This model has been applied in Flanders, Belgium, a region with a high concentration of livestock. The model evaluates the cost efficiency of policy intervention in the manure market through obliged processing. We propose to further optimise the policy using a regionally differentiated manure pressure indicator, which is directly derived from the dual outcome of the mathematical programme. This indicator increases transparency in the manure and processing market, leading to better decision support about location and type of manure processing.     

Upgrading of poly(vinyl chloride) by chemical modifications using sodium sulfide

The recycling of poly(vinyl chloride) (PVC) is one of the most important issues in the treatment of waste plastics. To improve PVC recycling, it is necessary to develop new recycling techniques, including new techniques for the dechlorination of chlorine-containing polymers. It has been established that wet dechlorination of PVC in NaOH/ethylene glycol solution is more effective than dry dechlorination. In this study, the wet process was used, and the chemical modification of PVC by nucleophilic substitution was considered for upgrading waste PVC. Chlorine was substituted in solution by several nucleophilic reagents, thus changing the properties of PVC. The reaction of PVC in Na2S/ethylene glycol solution at 170°C resulted in the formation of a mixture comprising 32% elimination and 26% substitution products. The scanning electron microscopy/energy dispersive X-ray spectroscopy mappings and elementary analysis of PVC indicated that this chlorine-substitution process led to cross-linking by sulfur.